In this thesis, a one-dimensional, two-fluid model is developed in MATLAB-Simulink. The model features a mass, momentum, and energy balance for each fluid--an ideal gas and an incompressible liquid. The simulation may model a straight pipe section, or a pipe section that involves a cross-sectional area change. Rough models of interphase heat transfer and interphase friction are included. Currently, phase change is not modeled in the simulation Also, a single-fluid model was developed before the two-fluid model, as an intermediate step in developing the two-fluid model. The single-phase simulation applies a mass, momentum, and energy balance for the single fluid, and ideal gas. The single-fluid model was validated by incompressible flow, Fanno flow, and isentropic flow models. The incompressible model demonstrated the simulations ability to properly balance pressure and frictional forces. The Fanno flow model showed that the simulation could capture compressibility effects. The isentropic flow model validation verified that the simulation could model area change properly. The two-fluid model was validated using the Homogeneous Equilibrium Model (HEM). An analytical model of HEM flow with frictional pressure drop was developed to compare against the simulation results. To achieve the HEM, interphase effects were tuned so that the liquid and gas phases had similar temperatures and velocities. Under these conditions, the simulation matched the analytical model. The thesis goal is to create a solid foundation for an open-source, one-dimensional, two-fluid model that is easier to use and modify than current nuclear system analysis software. / Master of Science

Zur Produktion von gewirkten Textilien werden mehrere Nadeln auf eine Legebarre gesetzt, die durch Servoantriebe positioniert werden. Aufgrund der erzwungenen Bewegung kann der Antriebsstrang bei hohen Drehzahlen zur Schwingung angeregt werden. Die richtige Wahl der Steuerkurven ist daher eine sehr wichtige und anspruchsvolle Aufgabe, die durch ein Antriebsstrangmodell unterstützt werden soll. Dafür wird am Beispiel eines Teststands ein Modell des Antriebsstranges in MATLAB/Simulink® entwickelt. Für das Antriebsstrangmodell müssen eine geeignete Modellordnung und Modellparameter gewählt werden. Die unbekannten Modellparameter werden durch eine Parameteridentifikation ermittelt. Mit einer Validierung wird ein geeignetes Anregungsspektrum für die Bestimmung der Modellordnung und die Parameteridentifikation ermittelt.

No description available.

No description available.

No description available.

No description available.

No description available.

The objective of this thesis is to design a model for a multi global navigation satellite system using Simulink. It explains a design procedure which includes the models for transmitter and receiver for two different navigation systems. To overcome the problem, where less number of satellites are visible to determine location degrades the performance of any positioning system significantly, this research has done to make use of multi GNSS satellite signals in one navigation receiver.

Veículos Aéreos não Tripulados (VANTs) são aeronaves que voam sem tripulação e são capazes de realizar diversos tipos de missões, como vigilância, coleta de dados topográficos e monitoramento ambiental. Este é um domínio que tem muito a ganhar com a aplicação da abordagem de Linha de Produtos de Software (LPS), uma vez que é rico em variabilidades e cada modelo de VANT tem também muitas partes comuns. Neste trabalho é apresentada uma infraestrutura tecnológica e de configuração de ativos em Simulink, gerenciados pelas ferramentas Pure::variant e Hephaestos para uma LPS de VANTs. Um conjunto de padrões para especificação de variabilidades em Simulink é proposto, bem como uma extensão para a ferramenta Hephaestus. Uma comparação entre as ferramentas Pure::variants e Hephaestus é apresentada / Unmanned Aerial Vehicles (UAVs) are aircrafts that can fly without any crew and are capable to realize several types of missions such as surveillance, topographic data collection and environmental monitoring. This is a domain which can benefit very much with the adoption of the Software Product Lines (SPL) approach, as each UAV model is rich in variabilities and has many common parts. In this work it is presented a software asset configuration infrastructure for the Simulink environment, managed by the tools Pure::variants and Hephaestus for a UAV SPL. A set of patterns of variability specification in Simulink is proposed as well as an extension to Hephaestus to support a SPL product engineering for Simulink. A comparison between Pure::variants and Hephaestus is also presented

Orientador: Cláudio Kitano / Banca: Ricardo Tokio Higuti / Banca: Luiz Antonio Perezi Marçal / Resumo: Neste trabalho estuda-se a interferometria laser, a qual constitui uma técnica adequada para determinar grandezas físicas com sensibilidade extremamente elevada. Basicamente, no interferômetro óptico, a informação a respeito do dispositivo sob teste é inserida na fase da luz. Utilizando-se o fotodiodo, promove-se a transferência de informação, do domínio óptico para o elétrico, no qual pode ser demodulada usando-se as várias técnicas disponíveis na literatura para detectar sinais modulados em fase. Ênfase é dada a um novo método de demodulação de fase óptica auto-consistente e de grande sensibilidade. Neste método, utiliza- se a modulação dada por uma forma de onda triangular e é baseado na análise do espectro do sinal fotodetectado, sendo capaz de estender a faixa dinâmica de demodulação a valores tão elevados quanto às dos métodos clássicos. Simulações dinâmicas computacionais de interferômetros ópticos são executadas em Simulink juntamente com este método, levando-se em consideração tensões de ruído eletrônico do tipo ruído branco, evidenciando a eficiência do método quando comparados com dados teóricos obtidos em Matlab. A validação experimental do método é realizada com o auxílio de um modulador eletro-óptico de amplitudes, cujas características de fase podem ser previstas analiticamente. Trata-se de um sensor polarimétrico baseado em cristal de Niobato de Lítio, em que a diferença de fase óptica induzida pela tensão elétrica aplicada pode ser determinada através de análise espectral, tal como o novo método descrito neste trabalho. Um interferômetro de Michelson homódino de baixo custo é implementado e a eficiência do novo método de demodulação de fase óptica é avaliada através de testes com atuadores e manipuladores piezoelétricos flextensionais, cujas características de linearidade são conhecidas... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: In this work, has been done a study the laser interferometer, which is a technique for determining physical quantities with extremely high sensitivity. Basically, in the optical interferometer, information about the device under test modulates the phase of light. Using a photodiode, promotes the transfer of information from the optical domain for the electric, which can be demodulated using the various techniques available in literature to detect modulated signals in phase. Emphasis is given to a new method of phase demodulation of optical self-consistent and high sensitivity. The method employs a linear modulation given by a triangular waveform, and is based on analysis of the spectrum of the photodetected signal, being able to extend the dynamic range of the demodulation values as high as the classical methods. Dynamic computational simulations of optical interferometers are implemented in Simulink with this method, taking into account strains of electronic noise like white noise, indicating the efficiency of the method compared with theoretical data obtained in Matlab workspace. The experimental validation of the method is performed with the aid of an electro- optic amplitude modulator, whose phase characteristics can be analytically predicted. This is a polarimetric sensor based on lithium niobate crystal, in which the optical phase difference induced by electric voltage can be determined by spectral analysis, using new method described in this work. A low cost homodyne Michelson interferometer is implemented and the efficiency of the new method of optical phase demodulation is evaluated by testing with piezoelectric flextensional actuators whose characteristics of linearity are well known.The experimental results agree with theoretical analysis and reveal this method is more efficient than the classical methods / Mestre