Made available in DSpace on 2014-10-09T12:42:32Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:01:42Z (GMT). No. of bitstreams: 0 / Os revestimentos eletrozincados empregados como proteção galvânica ativa sobre os aços são utilizados industrialmente há longo tempo. Entretanto, como o zinco é um elemento muito reativo, o tratamento da sua superfície é necessário para aumentar sua vida útil. O tratamento mais utilizado consiste em imersão em solução de conversão contendo cromo hexavalente, o qual vem sendo banido por gerar substâncias tóxicas e carcinogênicas, tendo sua utilização proibida pelas normas europeias. Neste trabalho, foram estudados tratamentos alternativos ao cromato para o aço eletrozincado que não geram resíduos tóxicos. O tratamento escolhido foi desenvolvido em etapas. A primeira etapa envolveu o uso de um composto orgânico, o 2 butino-1,4 diol propoxilato, em solução com sais oxidantes e com nitrato de cério como aditivo. A etapa seguinte consistiu em imersão da superfície tratada pela etapa anterior, em um agente oxidante, o peróxido de hidrogênio. A terceira etapa consistiu na imersão em solução com 2 butino-1,4 diol propoxilato e oxalato de nióbio amoniacal (ANO). As superfícies tratadas, após cada uma das etapas, foram caracterizadas por microscopia óptica e eletrônica de varredura (MEV), difração de raios X (DRX), espectroscopia por infravermelho (FTIR) e espectroscopia fotoeletrônica de raios X (XPS). A caracterização quanto à corrosão das superfícies tratadas foi feita por ensaios de névoa salina e espectroscopia de impedância eletroquímica (EIE). Os resultados mostraram que cada uma das etapas teve uma contribuição no aumento da resistência à corrosão e esta foi dependente do tempo de tratamento em cada uma das três etapas. A composição química das camadas obtidas foi caracterizada por FTIR e XPS. Esta última técnica permitiu analisar a distribuição dos elementos nas camadas formadas ao longo da espessura da mesma, usando a técnica de desbaste (sputtering), obtendo perfis de profundidade. A presença de ácido carboxílico ligado ao substrato metálico (zinco) foi observada. Os resultados mostraram que ocorreu formação de camada orgânica e a incorporação de cério e de nióbio a esta camada. Estes se apresentam distribuídos em toda a extensão da camada, na forma de óxidos em dois estados de oxidação, III e IV, no caso do cério, e IV e V, no caso do nióbio. As camadas formadas após as várias etapas adotadas contêm uma estrutura polimérica formada por filme orgânico e uma mistura de óxidos, particularmente óxido e hidróxido de zinco, os quais ficam retidos na estrutura da camada e conferem proteção à corrosão do substrato metálico por períodos prolongados de imersão. Os resultados quanto a proteção à corrosão mostraram que o tratamento com o melhor desempenho (T10_10_10) proporcionou proteção ao substrato por longos períodos de tempo e esta foi superior em comparação à promovida por camada de cromato, tanto pelo ensaio de névoa salina como o de EIE. Este tratamento mostrou-se, portanto, uma alternativa promissora para substituição de camada de cromato na proteção de aço eletrozincado, tanto do ponto de vista ambiental, por não gerar resíduos tóxicos, como de resistência à corrosão. / Tese (Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

This work was performed in the framework of an interdisciplinary graduate program that focuses on the establishment and extension of innovative compounds for the packaging of electronic systems. Such chemically or biotechnologically tailored compounds can be used for the direct patterning of optically, magnetically or biologically functional structures in nano- and biotechnical products. In order to organize matter at the nanometer scale, imprinting litho-graphy techniques or self-organization processes are appropriate. Fine-tuning of numerous engineering processes requires continuous and high precision monitoring as well as control of diverse parameters. These demands are only partially met by physical or chemical components since they use surrogate parameters, measure off-line, or provide insufficient performances. Biological compounds, in particular protein-based feedback systems, fulfill certain system requirements to a considerable degree. Hydrophobins and S-layer proteins are surface active proteins, produced by filamentous fungi or bacteria. In nature, these (self )assembly proteins form highly ordered and robust structures. In addition, their tolerance for different sequence manipulations and chemical modifications allows extensive functionalization of these nanometer-sized proteins. Hence, these surface active proteins can also be fused with other protein domains to create chimera, which retain function of both original proteins. In conclusion, both hydrophobins and S-layer proteins represent a versatile tool in numerous fields of applied biotechnology, medicine or diagnostics. But until now, efficient in vitro operation in molecular designed protein coatings is strongly restricted due to their complex assembly mechanism. In the first phase of this work, it was demonstrated, that representatives of class I and class II hydrophobins tend to form multilayered structures on solid surfaces. It was found that only two protein orientations seems to be preferentially formed. In the process of assembly, the orientation of the first hydrophobin layer strictly depends on the substrate wettability. Consequently, each of the following hydrophobin layers is inverse oriented to the layer before. This alternating assembly mechanism has to be taken into account, when working with functionalized hydrophobins, because a hydrophobin-fused functional protein domain is exclusively located on one side of the protein. Due to the densely packed structure of surface active proteins, a fused functional domain, embedded between two hydrophobins is barely available for external reagents. Basically, the simultaneous existence of a broad spectrum of ordered and disordered assembly structures, demonstrated the need of an uniform protein film assembly for applications in fine-diagnostics or biomedicine. With regard to molecular designed protein coatings, this work further aimed at establishing conditions to develop a method for a ‘layer-by-layer’ assembly of protein chimeras. Based on their amphiphilic character, self-assembly behavior of surface active proteins can be influenced by conventional ionic surfactants. In order to study the effect of surfactants on the composition and morphology of adsorbed protein films, contact angle measurements, nulling ellipsometry, SEM, AFM and AFAM were performed. It was found that the layer thickness of assembled protein films is strictly dependent on the amount of added surfactant. At certain threshold surfactant concentrations, hydrophobins and S-layer proteins assemble in uniform layers, which are as thick as expected for a protein monolayer or a bilayer. Assembled protein films are covered by a smooth surfactant layer, which prevents further protein assembly. AFAM measurements reveal the formation of well defined lattice structures under the coverage of surfactants. Even the removal of the surfactant layer is possible without inter-fering with protein specific secondary structures. Solvent accessibility and functionality of protein-fused domains was successfully demonstrated. As compared to conventional assembly techniques, this novel protein deposition method offers a possibility for a ‘directed’ protein coating on solid surfaces. In addition, it guarantees broadly ranged homogeneous assembly of protein chimeras on non-planar or even porous surfaces independent of their position. Finally, a prototype for an interfacial FRET was developed in a close collaboration with the Institute of Physical Chemistry (TUD). This innovative FRET between semiconducting nano-particles and illuminating protein chimeras takes place across an oil/water interface. Hydro-phobins were used to stabilize artificial oil droplets in aqueous solution. These small proteins possess the ability to attach fused functional domains very close to an oil/water interface. When, in addition to this, an optically active nanostructure directly docks to the hydrophobin, the distance of a protein-fused domain and the nanostructure are in the range of the FÖRSTER radius. It was successfully demonstrated that quantum dots and fluorescent proteins fulfill the spectroscopic requirements of such a donor/acceptor pair. The FRET performance of these excitable oil droplets was examined as a ‘proof of concept’. Due to its modular design, this signal amplification setup could be exploited in numerous fields of technical application ranging from quantification of micronutrient to photothermal cancer therapy.

This work was performed in the framework of an interdisciplinary graduate program that focuses on the establishment and extension of innovative compounds for the packaging of electronic systems. Such chemically or biotechnologically tailored compounds can be used for the direct patterning of optically, magnetically or biologically functional structures in nano- and biotechnical products. In order to organize matter at the nanometer scale, imprinting litho-graphy techniques or self-organization processes are appropriate. Fine-tuning of numerous engineering processes requires continuous and high precision monitoring as well as control of diverse parameters. These demands are only partially met by physical or chemical components since they use surrogate parameters, measure off-line, or provide insufficient performances. Biological compounds, in particular protein-based feedback systems, fulfill certain system requirements to a considerable degree. Hydrophobins and S-layer proteins are surface active proteins, produced by filamentous fungi or bacteria. In nature, these (self )assembly proteins form highly ordered and robust structures. In addition, their tolerance for different sequence manipulations and chemical modifications allows extensive functionalization of these nanometer-sized proteins. Hence, these surface active proteins can also be fused with other protein domains to create chimera, which retain function of both original proteins. In conclusion, both hydrophobins and S-layer proteins represent a versatile tool in numerous fields of applied biotechnology, medicine or diagnostics. But until now, efficient in vitro operation in molecular designed protein coatings is strongly restricted due to their complex assembly mechanism. In the first phase of this work, it was demonstrated, that representatives of class I and class II hydrophobins tend to form multilayered structures on solid surfaces. It was found that only two protein orientations seems to be preferentially formed. In the process of assembly, the orientation of the first hydrophobin layer strictly depends on the substrate wettability. Consequently, each of the following hydrophobin layers is inverse oriented to the layer before. This alternating assembly mechanism has to be taken into account, when working with functionalized hydrophobins, because a hydrophobin-fused functional protein domain is exclusively located on one side of the protein. Due to the densely packed structure of surface active proteins, a fused functional domain, embedded between two hydrophobins is barely available for external reagents. Basically, the simultaneous existence of a broad spectrum of ordered and disordered assembly structures, demonstrated the need of an uniform protein film assembly for applications in fine-diagnostics or biomedicine. With regard to molecular designed protein coatings, this work further aimed at establishing conditions to develop a method for a ‘layer-by-layer’ assembly of protein chimeras. Based on their amphiphilic character, self-assembly behavior of surface active proteins can be influenced by conventional ionic surfactants. In order to study the effect of surfactants on the composition and morphology of adsorbed protein films, contact angle measurements, nulling ellipsometry, SEM, AFM and AFAM were performed. It was found that the layer thickness of assembled protein films is strictly dependent on the amount of added surfactant. At certain threshold surfactant concentrations, hydrophobins and S-layer proteins assemble in uniform layers, which are as thick as expected for a protein monolayer or a bilayer. Assembled protein films are covered by a smooth surfactant layer, which prevents further protein assembly. AFAM measurements reveal the formation of well defined lattice structures under the coverage of surfactants. Even the removal of the surfactant layer is possible without inter-fering with protein specific secondary structures. Solvent accessibility and functionality of protein-fused domains was successfully demonstrated. As compared to conventional assembly techniques, this novel protein deposition method offers a possibility for a ‘directed’ protein coating on solid surfaces. In addition, it guarantees broadly ranged homogeneous assembly of protein chimeras on non-planar or even porous surfaces independent of their position. Finally, a prototype for an interfacial FRET was developed in a close collaboration with the Institute of Physical Chemistry (TUD). This innovative FRET between semiconducting nano-particles and illuminating protein chimeras takes place across an oil/water interface. Hydro-phobins were used to stabilize artificial oil droplets in aqueous solution. These small proteins possess the ability to attach fused functional domains very close to an oil/water interface. When, in addition to this, an optically active nanostructure directly docks to the hydrophobin, the distance of a protein-fused domain and the nanostructure are in the range of the FÖRSTER radius. It was successfully demonstrated that quantum dots and fluorescent proteins fulfill the spectroscopic requirements of such a donor/acceptor pair. The FRET performance of these excitable oil droplets was examined as a ‘proof of concept’. Due to its modular design, this signal amplification setup could be exploited in numerous fields of technical application ranging from quantification of micronutrient to photothermal cancer therapy.

No description available.

The fundamental understanding of the dynamic characteristics of metal dissolution and redeposition behavior at the electrode-electrolyte interface is essential, which provides the basis for the development of advanced energy and conversion devices (such as electrochromic devices, electrocatalysts, and batteries) with superior electrochemical performances. We firstly demonstrate the feasibility of resynthesizing the electrode surface chemistry and tuning the electrochemical reactions at the solid-liquid interface by selectively changing the electrolyte composition and electrochemical cycling conditions. Amorphous TiO2 surface layers can be formed on WO3 electrodes by adding exotic Ti cations to the electrolyte, and slow electrochemical cycling. The dissolution and redeposition of electrodes and surface coatings are intertwined, helping to establish a dissolution-redeposition equilibrium at the interface, which can inhibit metal dissolution, stabilize electrode morphology, and promote electrochemical performance. Since the diffusion layer generated by the dissolution of transition metals is ubiquitous at the electrochemical solid-liquid interface, by combining in situ three-electrode electrochemical reaction cell with advanced spatially resolved synchrotron X-ray fluorescence microscopy and micro-X-ray absorption spectroscopy, we then successfully demonstrate the formation and chemical identification of the diffusion layer. By studying the evolution of diffusion layers(tens of micrometers thick) when using WO3 electrodes in acidic electrolytes, we find that with increasing distance of the dissolved species from the electrode surface, the oxidation state remains largely unchanged, but the local electronic environment of the dissolved W species becomes more distorted. We subsequently report a systematic experimental approach by collecting a series of twodimensional fluorescence images at the electrodes to study electrode dissolution and redeposition under different electrochemical conditions. The results show that (1) metal dissolution and redeposition behaviors greatly evolve under different electrode polarization and electrolyte compositions; (2) metal dissolution and redeposition behaviors are independent of bulk electrolyte pH but depend on interfacial pH; and (3) the accumulation of interfacial dissolved species promotes the formation of polytungstate interfacial networks, which ultimately manifest as temporal heterogeneity of redeposition. Lastly, we provide an in-depth study of the underlying mechanism of electrochemicalcycling induced crystallization at the electrode-electrolyte interface through a combination of advanced synchrotron radiation characterization techniques and an in situ electrochemical reaction setup. We have discovered that (1) foreign cations from the electrolyte engender both tensile and compressive strains inside the crystal; (2) repeated electrode dissolution and redeposition promote crystal growth through a non-classical crystallization pathway of particle attachment, but the initial growth of crystals is inhibited by internal strains; and (3) as the strain accumulates, the crystal rotates or moves, which is the fundamental reason for the dynamic structure evolution of the crystal during electrochemical cycling. To our knowledge, this is the first study of electrochemical-cycling-induced crystallization and its strain evolution. These new findings reveal a previously unknown relationship between crystal growth and its internal strain at the electrode-electrolyte interface. / Doctor of Philosophy / Energy drives the entire economy and human civilization. Energy is needed in every aspect of everyday life, and energy is an essential raw material for making and delivering all the products and services that modern society needs, even though it is invisible to us. Since 2000, the global energy demand has increased tenfold and economic growth has spawned a large number of new energy industries, but billions of people are still in urgent need of clean water, sanitation, nutrition, and medical care. Energy is a key factor in meeting these basic requirements for all of humanity. The increasing global energy demand and the increasing impact of climate change have put enormous pressure on the energy market. Therefore, it is necessary to accelerate the relevant actions of energy transition in the world. Among them, the research and innovation of electrochemical energy storage and conversion technology is a major direction. The electrochemical energy storage and conversion technology heavily relies on the various electrochemical reactions in practical devices such as rechargeable batteries, water electrocatalysts, and energy-saving electrochromic smart windows. Within numerous electrochemical reactions under the application, the solid (electrode)-liquid (electrolyte) interface dominates the most important electrochemical reactions. How to understand thephysicochemical reactions at the interface under electrochemical conditions is of great significance. As a major component of research innovations, this research contributes to the design of rational electrode materials, electrolyte compositions, and more efficient and durable electrochemical performance. From a fundamental perspective, my research enriches the understanding of solid-liquid interface reactions under electrochemical conditions, pointing out that electrode dissolution and redeposition and dynamic structural evolution of solid-liquid interfaces are important for further optimizing electrode material design and improving electrochemical performance.

Fast, sensitive, quantitative, and low-cost analysis of environmental pollutants is highly valuable for environmental monitoring. Due to its single-molecule sensitivity and fingerprint specificity, surface-enhanced Raman spectroscopy (SERS) has been widely employed for heavy metal, organic compound, and pathogen detection. However, SERS quantitation is challenging because 1) analytes do not stay in the strongest enhancing region ("hot spots") and 2) SERS reproducibility is poor. In this dissertation, gold nanoparticle/bacterial cellulose (AuNP/BC) substrates were developed to improve SERS sensitivity by increasing hot spot density within the laser excitation volume. Environmentally relevant organic amines were fixed at "hot spots" by lowering solution pH below the analyte pKa and thus enabling SERS quantitation. In addition, a new SERS internal standard was developed based upon the electromagnetic enhancement mechanism that relates Rayleigh (elastic) and Raman (in-elastic) scattering. Rayleigh scattering arising from the amplified spontaneous emission of the excitation laser was employed as a normalization factor to minimize the inherent SERS signal variation caused by the heterogeneous distribution of "hot spots" across a SERS substrate. This highly novel technique, hot spot-normalized SERS (HSNSERS), was subsequently applied to evaluate the efficiency of SERS substrates, provide in situ monitoring of ligand exchange kinetics on the AuNP surface, and to reveal the relationship between the pKa of aromatic amines and their affinity to citrate-coated AuNPs (cit-AuNPs). Finally, colloidally stable stable pH nanoprobes were synthesized using co-solvent mediated AuNP aggregation and subsequent coating of poly(ethylene) glycol (PEG). These nanoprobes were applied for pH detection in cancer cells and in phosphate buffered aerosol droplets. The latter experiments suggest that stable pH gradients exist in aerosol droplets. / PHD / Traditional analytical methods, such as gas chromatography/mass spectroscopy, liquid chromatography/mass spectroscopy, etc., cannot meet the demand for rapid screening of target environmental pollutants in drinking water. This issue arises due to the requirements for time-consuming sample pre-treatment, well-trained experts, complex instrumental parameter optimization, and scale challenges that limit onsite measurement. Surface-enhanced Raman spectroscopy is a promising approach to overcome these limitations. To improve SERS quantitation, surface-enhanced elastic scattering was developed as a novel internal standard to account for the SERS signal variation caused by substrate heterogeneity (“hot spot” normalization). Compared with traditional SERS internal standards, using scattered light as an internal standard reduces cost, time, interference, and experimental complexity for SERS detection. With this novel approach, the kinetics of adsorption/desorption of guest ligands/citrate onto/from the AuNP surface were quantified in situ and in real time. In addition, the SERS intensities of organic amines acquired at different solution pH values were differentiated using “hot spot” normalization, which revealed the relationship between aromatic amine pK_a and their affinity to the AuNP surface. Finally, the chemistry in confined aqueous environments, such as aerosol droplets, membrane channels, and cells, is challenging to probe using conventional analytical tools due to their inaccessible small volumes. To address this problem, SERS pH nanoprobes were synthesized and used to detect the pH inside cancer cells and micrometer-sized aerosol droplets.

No description available.

No description available.

Made available in DSpace on 2014-10-09T12:35:14Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T13:58:01Z (GMT). No. of bitstreams: 0 / Dissertação (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Submitted by Maria Eneide de Souza Araujo (mearaujo@ipen.br) on 2015-02-20T18:11:07Z No. of bitstreams: 0 / Made available in DSpace on 2015-02-20T18:11:07Z (GMT). No. of bitstreams: 0 / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP