81 |
Hierarchical spatiotemporal analyses and the design of all-solid-state lithium-ion batteries / 階層的時空間解析と全固体リチウムイオン電池の設計Yang, Seunghoon 25 July 2022 (has links)
京都大学 / 新制・課程博士 / 博士(人間・環境学) / 甲第24149号 / 人博第1052号 / 新制||人||246(附属図書館) / 2022||人博||1052(吉田南総合図書館) / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 内本 喜晴, 教授 吉田 鉄平, 准教授 松井 敏明, 教授 林 晃敏 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM
|
82 |
Probing electronic, magnetic and structural heterogeneity in advanced materials and Nanostructures with x-ray imaging, scattering and spectroscopic techniques.Yang, Weibing January 2018 (has links)
In this dissertation, we have used a combination of synchrotron-based x-ray spectroscopic, scattering and imaging techniques to investigate the electronic, magnetic and structural properties of materials and material systems which exhibit natural as well as engineered nanoscale structural distortions. In order to investigate the interplay between the above-mentioned degrees of freedom with spatial and depth resolution, we have utilized non-destructive techniques, such as x-ray absorption spectroscopy (XAS), polarization-dependent photoemission electron microscopy (PEEM), nanoscale scanning x-ray diffraction microscopy (nano-SXDM) and standing-wave x-ray photoemission spectroscopy (SW-XPS). The results were compared to several types of state-of-the-art first-principles theoretical calculations. In the first part of the dissertation, we have investigated the nanoscale magneto-elastic structure of the Fe3Ga magnetic alloy, which was recently reported to exhibit non-volume conserving magnetostriction. As the result of our combined PEEM and nano-SXDM study, we have discovered the structural basis for this phenomenon – periodic long-wavelength (~269 nm) elastic domain walls, with domains (regions of zero-strain) existing as narrow transition regions. Atto-scale elastic gradients and self-strain across the elastic domain walls were quantitatively measured and imaged by nano-SXDM. Our measurements revealed that the gradients inside the elastic walls are accommodated by gradually increasing/decreasing inter-planar spacing resembling a longitudinal wave. Our element-specific polarization-dependent PEEM measurements revealed that the magnetic structure of the crystal modulates with similar periodicity (~255 nm), and the resulting magneto-elastic coupling produces a ‘giant’ field-induced bulk deformation, which is equal to the measured self-strain of the elastic domain wall. In the second part of this dissertation, we utilized a combination of soft x-ray standing-wave photoemission spectroscopy (SW-XPS), hard x-ray photoemission spectroscopy (HAXPES) and scanning transmission electron microscopy (STEM) to probe the depth-dependent and single-unit-cell resolved electronic structure of isovalent manganite superlattices (Eu0.7Sr0.3MnO3/La0.7Sr0.3MnO3)15 wherein the electronic and magnetic properties are intentionally modulated with depth via engineered O octahedral rotations and A-site displacements. Standing-wave-excited spectroscopy of the Mn 2p and O 1s core-levels confirmed the isovalent nature of the Mn ions in the superlattice and revealed significant depth-dependent variations in the local chemical and electronic environment around the O atoms, consistent with the state-of-the-art theoretical calculations. Furthermore, it was shown that a surface relaxation and orbital reconstruction in the several top Eu0.7Sr0.3MnO3 atomic layers produces substantial changes in the observed electronic structure, which, according to the first-principles theoretical calculations, occur due to the establishment of orbital stripe order in the top unit cell. In summary, we have used synchrotron-based x-ray spectroscopic and microscopic techniques, in conjunction with high-resolution electron microscopy, to study the electronic, magnetic and structural properties of advanced functional materials exhibiting strong nanoscale heterogeneity. We discovered a strong coupling between the nanoscale structural and magnetic properties in the non-conventional magnetostrictive Fe3Ga single crystal. Our results suggest that this coupling provides the fundamental basis for the non-conventional magnetostriction phenomenon in this material. We have also discovered that the electronic properties of the Eu0.7Sr0.3MnO3/La0.7Sr0.3MnO3 superlattices can be epitaxially tuned via engineered A-site cation displacement, which is a result of the strong interfacial coupling between the Eu0.7Sr0.3MnO3 and La0.7Sr0.3MnO3 layers. This suggests a new way of tailoring and spatially-confining electronic and ferroic behavior in complex oxide heterostructures and creating novel ordered surface-reconstruction effects. / Physics
|
83 |
Fulleride salts : from polymers to superconductorsMargadonna, Sarena January 2000 (has links)
No description available.
|
84 |
Towards a free-electron laser driven by electrons from a laser-wakefield accelerator : simulations and bunch diagnosticsBajlekov, Svetoslav January 2011 (has links)
This thesis presents results from two strands of work towards realizing a free-electron laser (FEL) driven by electron bunches generated by a laser-wakefield accelerator (LWFA). The first strand focuses on selecting operating parameters for such a light source, on the basis of currently achievable bunch parameters as well as near-term projections. The viability of LWFA-driven incoherent undulator sources producing nanojoule-level pulses of femtosecond duration at wavelengths of 5 nm and 0.5 nm is demonstrated. A study on the prospective operation of an FEL at 32 nm is carried out, on the basis of scaling laws and full 3-D time-dependent simulations. A working point is selected, based on realistic bunch parameters. At that working point saturation is expected to occur within a length of 1.6 m with peak power at the 0.1 GW-level. This level, as well as the stability of the amplification process, can be improved significantly by seeding the FEL with an external radiation source. In the context of FEL seeding, we study the ability of conventional simulation codes to correctly handle seeds from high-harmonic generation (HHG) sources, which have a broad bandwidth and temporal structure on the attosecond scale. Namely, they violate the slowly-varying envelope approximation (SVEA) that underpins the governing equations in conventional codes. For this purpose we develop a 1-D simulation code that works outside the SVEA. We carry out a set of benchmarks that lead us to conclude that conventional codes are adequately capable of simulating seeding with broadband radiation, which is in line with an analytical treatment of the interaction. The second strand of work is experimental, and focuses on on the use of coherent transition radiation (CTR) as an electron bunch diagnostic. The thesis presents results from two experimental campaigns at the MPI für Quantenoptik in Garching, Germany. We present the first set of single-shot measurements of CTR over a continuous wavelength range from 420 nm to 7 μm. Data over such a broad spectral range allows for the first reconstruction of the longitudinal profiles of electron bunches from a laser-wakefield accelerator, indicating full-width at half-maximum bunch lengths around 1.4 μm (4.7 fs), corresponding to peak currents of several kiloampères. The bunch profiles are reconstructed through the application of phase reconstruction algorithms that were initially developed for studying x-ray diffraction data, and are adapted here for the first time to the analysis of CTR data. The measurements allow for an analysis of acceleration dynamics, and suggest that upon depletion of the driving laser the accelerated bunch can itself drive a wake in which electrons are injected. High levels of coherence at optical wavelengths indicate the presence of an interaction between the bunch and the driving laser pulse.
|
85 |
Thermo-Mechanical Processing and Advanced Charecterization of NiTi and NiTiHf Shape Memory AlloysLey, Nathan A 05 1900 (has links)
Shape memory alloys (SMAs) represent a revolutionary class of active materials that can spontaneously generate strain based on an environmental input, such as temperature or stress. SMAs can provide potential solutions to many of today's engineering problems due to their compact form, high energy densities, and multifunctional capabilities. While many applications in the biomedical, aerospace, automotive, and defense industries have already been investigated and realized for nickel-titanium (NiTi) based SMAs, the effects of controlling and designing the microstructure through processing (i.e. extreme cold working) have not been well understood. Current Ni-Ti based SMAs could be improved upon by increasing their work output, improving dimensional stability, preventing accidental actuation, and reducing strain localization. Additionally, there is a strong need to increase the transformation temperature above 115 °C, the current limit for NiTi and is especially important for aerospace applications. Previous research has shown that the addition on ternary elements such as Au, Hf, Pd, Pt, and Zr to NiTi can greatly increase these transformation temperatures. However, there are several limiting factors with these ternary additions such as increased cost, especially with Au, Pd, and Pt, as well as, difficulty in conventionally processing these alloys. Therefore, the main objectives of this research is to study how processing can alter the mechanical properties of NiTi and characterizing it using in situ synchrotron radiation x-ray diffraction (SR-XRD), understanding how we can process ternary SMAs (NiTiHf) by conventional means, and lastly how this processing alters precipitation characteristics and mechanical properties of these alloy systems.
|
86 |
Deposição de chumbo no esmalte dentário bovino durante o processo de formação de cárie in vitro / Lead deposition in bovine enamel during a pH-cycling regimen simulating the caries processMolina, Gabriela Ferian 09 April 2012 (has links)
Assim como o flúor, o chumbo se acumula sobre a superfície do esmalte de dentes não irrompidos , o que ainda não se sabe, é se durante o processo de formação da cárie dentária, ele também pode se acumular sobre o esmalte dentário. Este estudo avalia a distribuição espacial do chumbo em blocos dentários bovino submetidos a um regime de ciclagem de pH simulando o processo de desenvolvimento da cárie dentária. Os blocos de esmalte dentário foram submetidos a oito ciclos de desmineralização e remineralização, sendo que, na solução correspondente ao grupo experimental 1 (E1), foram adicionados 30 μg/l de acetato de chumbo e na solução correspondente ao grupo experimental 2 (E2), foram adicionados 300 μg/l de acetato de chumbo, enquanto que, na solução correspondente ao grupo controle (C) o chumbo não foi adicionado. Após os ciclos de desmineralização e remineralização, foram confeccionadas, a partir dos blocos dentários, fatias de 100 μm de espessura. Essas fatias foram analisadas por microscopia de luz polarizada para observar a extensão da lesão cariosa formada e também foram levadas para análise através da microfluorescência de raio-x por luz Sincrotron. As lesões de cárie foram observadas ao longo de toda a superfície do esmalte apresentando uma extensão de aproximadamente 120 μm. Foi observado no esmalte, um gradiente de concentração de chumbo que diminuía da superfície em direção à dentina. Os sinais mais altos de chumbo foram encontrados no grupo E2. E as diferenças estatisticamente significantes, foram observadas na profundidade de esmalte 0 (superfície do esmalte) na comparação entre o grupo C e o grupo E2 (C vs E2; p = 0,029) e na profundidade de esmalte de 50 m, nas comparações entre o grupo C e grupo E2 (C vs E2; p=0,029) e entre o grupo E1 e o grupo E2 (E1 vs E2; p = 0,029). Assim, este estudo sugere que se o chumbo estiver presente na cavidade oral, durante o processo de desenvolvimento da lesão cariosa, ele pode se acumular ao esmalte dentário. / Like fluoride, lead (Pb) accumulates on the enamel surface pre-eruptively, but it is not yet known whether it also deposits on enamel while dental caries is developing. This study evaluates Pb distribution in bovine enamel slabs submitted to a pH-cycling regimen simulating the caries process. The slabs were subjected to 8 cycles of de- and remineralizing conditions, and Pb (as acetate salt) was added to the de- and remineralized solutions at concentrations of 30 μg/l (experimental group, E1) and 300 μg/l (experimental group, E2). The control group (C) consisted of solutions to which Pb was not added. After the pH cycling, 100 μm sections of the slabs were analyzed by polarizing microscopy, to observe the extent of caries-like lesions, and these sections were used for Pb estimation by Synchrotron radiation X-ray microfluorescence. Caries lesions were observed along all superficial enamel surfaces to an extent of 120 μm. A Pb concentration gradient was observed in enamel, which decreased toward dentine. The highest Pb signals were observed for group E2, and the differences were statistically significant at enamel depths of 0 (C vs. E2; p = 0.029) and 50 m (C vs. E2 and E1vs. E2; p = 0.029). In conclusion, this study suggests that if Pb is present in the oral environment, it may deposit in enamel during the caries process.
|
87 |
Imagerie de phase quantitative par interférométrie à décalage quadri-latéral. Application au domaine des rayons x durs / Quantitative X-ray phase imaging with a lateral shearing interferometer. Application to the hard X-raysRizzi, Julien 08 November 2013 (has links)
Depuis la découverte des rayons X par Röntgen, l'imagerie radiographique utilise le contraste d'absorption. Cette technique est efficace uniquement si les objets à étudier sont suffisamment absorbants. C'est pour cela qu'on peut détecter une lésion osseuse avec une radiographie, mais pas une lésion ligamentaire.Toutefois, l'imagerie par contraste de phase peut permettre de surmonter cette limite. Depuis les années 2000, s'appuyant sur des travaux similaires existant en optique visible, les scientifiques des rayons X essayent de mettre au point des dispositifs sensibles au contraste de phase et compatibles avec des applications industrielles comme l'imagerie médicale ou le contrôle non-destructif. Néanmoins, les architectures classiques des interféromètres sont très difficiles à mettre en place dans les rayons X durs, et sont trop contraignantes pour être transférables vers l'industrie. C'est pourquoi des dispositifs utilisant des réseaux de diffraction ont été les plus développés. Ils ont permis d'obtenir les premières images de radiographie par contraste de phase sur des humains vivants.Mais les architectures proposées aujourd'hui utilisent plusieurs réseaux et son contraignantes pour les industriels. C'est pourquoi j'ai développé au cours de ma thèse un système n'utilisant qu'un unique réseau de phase. J'ai montré qu'un tel dispositif peut générer des interférogrammes achromatiques et invariants par propagation. Ce dispositif a permis d'effectuer des mesures de contraste de phase quantitatives sur un fossile biologique, ainsi que des mesures métrologiques sur des miroirs plans sensibles aux rayons X. / Since Röntgen discovered X-rays, X-ray imaging systems are based on absorption contrast. This technique is inefficient for weakly absorbing objects. As a result, X-ray standard radiography can detect bones lesions, but cannot detect ligament lesions.However, phase contrast imaging can overcome this limitation. Since the years 2000, relying on former works of opticians, X-ray scientists are developing phase sensitive devices compatible with industrial applications such as medical imaging or non destructive control.Standard architectures for interferometry are challenging to implement in the X-ray domain.This is the reason why grating based interferometers became the most promising devices to envision industrial applications. They provided the first x-ray phase contrast images of living human samples.Nevertheless, actual grating based architectures require the use of at least two gratings, and are challenging to adapt on an industrial product. So, the aim of my thesis was to develop a single phase grating interferometer. I demonstrated that such a device can provide achromatic and propagation invariant interference patterns. I used this interferometer to perform quantitative phase contrast imaging of a biological fossil sample and x-ray flat mirror metrology.
|
88 |
Deposição de chumbo no esmalte dentário bovino durante o processo de formação de cárie in vitro / Lead deposition in bovine enamel during a pH-cycling regimen simulating the caries processGabriela Ferian Molina 09 April 2012 (has links)
Assim como o flúor, o chumbo se acumula sobre a superfície do esmalte de dentes não irrompidos , o que ainda não se sabe, é se durante o processo de formação da cárie dentária, ele também pode se acumular sobre o esmalte dentário. Este estudo avalia a distribuição espacial do chumbo em blocos dentários bovino submetidos a um regime de ciclagem de pH simulando o processo de desenvolvimento da cárie dentária. Os blocos de esmalte dentário foram submetidos a oito ciclos de desmineralização e remineralização, sendo que, na solução correspondente ao grupo experimental 1 (E1), foram adicionados 30 μg/l de acetato de chumbo e na solução correspondente ao grupo experimental 2 (E2), foram adicionados 300 μg/l de acetato de chumbo, enquanto que, na solução correspondente ao grupo controle (C) o chumbo não foi adicionado. Após os ciclos de desmineralização e remineralização, foram confeccionadas, a partir dos blocos dentários, fatias de 100 μm de espessura. Essas fatias foram analisadas por microscopia de luz polarizada para observar a extensão da lesão cariosa formada e também foram levadas para análise através da microfluorescência de raio-x por luz Sincrotron. As lesões de cárie foram observadas ao longo de toda a superfície do esmalte apresentando uma extensão de aproximadamente 120 μm. Foi observado no esmalte, um gradiente de concentração de chumbo que diminuía da superfície em direção à dentina. Os sinais mais altos de chumbo foram encontrados no grupo E2. E as diferenças estatisticamente significantes, foram observadas na profundidade de esmalte 0 (superfície do esmalte) na comparação entre o grupo C e o grupo E2 (C vs E2; p = 0,029) e na profundidade de esmalte de 50 m, nas comparações entre o grupo C e grupo E2 (C vs E2; p=0,029) e entre o grupo E1 e o grupo E2 (E1 vs E2; p = 0,029). Assim, este estudo sugere que se o chumbo estiver presente na cavidade oral, durante o processo de desenvolvimento da lesão cariosa, ele pode se acumular ao esmalte dentário. / Like fluoride, lead (Pb) accumulates on the enamel surface pre-eruptively, but it is not yet known whether it also deposits on enamel while dental caries is developing. This study evaluates Pb distribution in bovine enamel slabs submitted to a pH-cycling regimen simulating the caries process. The slabs were subjected to 8 cycles of de- and remineralizing conditions, and Pb (as acetate salt) was added to the de- and remineralized solutions at concentrations of 30 μg/l (experimental group, E1) and 300 μg/l (experimental group, E2). The control group (C) consisted of solutions to which Pb was not added. After the pH cycling, 100 μm sections of the slabs were analyzed by polarizing microscopy, to observe the extent of caries-like lesions, and these sections were used for Pb estimation by Synchrotron radiation X-ray microfluorescence. Caries lesions were observed along all superficial enamel surfaces to an extent of 120 μm. A Pb concentration gradient was observed in enamel, which decreased toward dentine. The highest Pb signals were observed for group E2, and the differences were statistically significant at enamel depths of 0 (C vs. E2; p = 0.029) and 50 m (C vs. E2 and E1vs. E2; p = 0.029). In conclusion, this study suggests that if Pb is present in the oral environment, it may deposit in enamel during the caries process.
|
89 |
Study of Cu-based Cathode Materials for High-energy All-solid-state Fluoride-ion Batteries / 全固体フッ化物イオン二次電池における銅系正極材料の研究Zhang, Datong 23 March 2022 (has links)
京都大学 / 新制・課程博士 / 博士(人間・環境学) / 甲第23995号 / 人博第1047号 / 新制||人||245(附属図書館) / 2022||人博||1047(吉田南総合図書館) / 京都大学大学院人間・環境学研究科相関環境学専攻 / (主査)教授 内本 喜晴, 教授 中村 敏浩, 教授 陰山 洋, 教授 雨澤 浩史 / 学位規則第4条第1項該当 / Doctor of Human and Environmental Studies / Kyoto University / DFAM
|
90 |
Intérêt du rayonnement synchrotron dans la thérapie des tumeurs cérébrales : méthodologie et applications précliniquesRegnard, Pierrick 20 December 2007 (has links) (PDF)
La Thérapie par MicroFaisceaux (MRT) et la Thérapie Stéréotaxique par Rayonnement Synchrotron (SSRT) sont des techniques innovantes de radiothérapie expérimentale développées actuellement à l'ESRF. L'utilisation de modèles tumoraux différents pour chaque technique limite leur comparaison. <br />En MRT, sur rats porteurs de tumeur 9L, la médiane de survie des rats contrôle est doublée (de 20 jours à 40 jours) lors d'irradiation avec un espacement de 200 µm entre les microfaisceaux voire triplée (67 jours) à 100 µm d'espacement (mais provoquant alors d'importantes lésions du tissu sain). L'influence importante du collimateur multifentes, a également été démontrée. La combinaison de diverses drogues avec la technique de MRT a été testée. Des résultats prometteurs (médiane de survie de 40 jours et 30% de survivants à long terme) sont obtenus en injectant du gadolinium en intracérébral avant une irradiation MRT en faisceaux croisés à 460 Gy. De plus, l'irradiation MRT de tumeurs à stade plus précoce permet de quadrupler la médiane de survie (79 jours) et d'obtenir 30% de survivants à long terme. La mise en place d'un ciblage de la tumeur par imagerie avant l'irradiation et l'utilisation d'un collimateur adapté permettront d'améliorer encore ces résultats. Les différences entre les deux modèles tumoraux utilisés en MRT (modèle 9L) et en SSRT (modèle F98) étant importantes des expériences comparatives MRT/SSRT ont été réalisées sur ces deux modèles. Les résultats obtenus montrent une efficacité proche des 2 techniques sur le modèle F98 et une meilleure efficacité de la MRT sur le modèle 9L. Ces résultats pourront permettre d'orienter le type tumoral adapté à chaque technique.
|
Page generated in 0.0172 seconds