The Agua Blanca fault is a major transverse structure of northern Baja California, extending more than 120km east from the Punta Banda ridge near the city of Ensenada to the San Matais Pass in central Baja. Through much of its eastern extent slip on this fault appears to be pure strike slip, however, at the Valle de Santo Tomás the fault makes a ~25°; change in orientation, which coincides with the formation of extensional basins on the fault. Recent evidence of the independent movement of the Baja Micro-plate relative to a stable Southern California Black leads to several possible hypotheses to explain this including: 1)That basins are localized structures, the result of a series of right steps or bends along the dextral Agua Blanca fault. 2)Basins are transtensional, possibly as a result of complexities associated with the northern boundary of the Baja Micro-plate . To test between these hypotheses it was necessary to constrain the fault kinematics on both basin bounding and in-basin faults, well as the basin geometry. This was accomplished through combined structural and geophysical surveys. Data collected suggest that the majority of dip-slip is confined to the Santo Tomás fault bounding the basin to the south, while the Agua Blanca fault bounding the basin to the north is primarily strike slip. This orientation typical in transtensional basins, suggesting that although Valle de Santo Tomás formed at a step over it is not a pull apart basin. Possible explanations for transtension in this area come from the orientation of the Agua Blanca fault in relation to the Baja Micro-plate. Where the fault is close to aligned with the relative motion of the plate there is little transtension, such as in Valle de Agua Blanca, however, where the fault makes a 25° change in orientation and becomes more oblique the motion of the Baja Micro-plate transtension is present.

Three-dimensional mechanical simulations of the San Andreas fault (SAF) within the Coachella Valley in California produce deformation that match geologic observations and demonstrate the impact of fault geometry on uplift patterns. Most models that include the Coachella Valley segment of the SAF have assumed a vertical orientation, but recent studies suggest that this segment dips 60-70° northeast. We compare models with varied fault geometry and evaluate how well they reproduce observed uplift patterns. Our model with a dipping SAF matches geologic observations, while models containing a vertical fault do not. This suggests that the active Coachella Valley segment of the SAF dips 60-70° northeast. Since ~1.5 Ma, the SAF in this region has undergone a major reorganization that entailed initiation of the San Jacinto fault and termination of slip on the West Salton detachment fault. The trace of the SAF itself has also evolved, with several shifts in activity through the San Gorgonio Pass. Despite a rich geologic record of these changes, the mechanisms that controlled abandonment of faults, initiation of new strands, and shifting loci of uplift are poorly understood. We model snapshots in time through the evolution of the fault system, and assess the mechanical viability of our snapshots by comparison with uplift patterns inferred from the stratigraphic record. Model results are compared with vertical axis rotation. We examine incipient faulting using maps of strain energy density, and explore changes to the mechanical efficiency of the system to better understand the evolution of this fault system.

Damage zones adjacent to or associated with faults are important to the geologic community because of their implications to hazards and their ability to preserve evidence for, and show history of, slip, fluid flow, and deformation associated with large strike-slip faults. We examine two fault zones in southern California where fault zone damage is expressed. We revisit the drilled crystalline core from the Cajon Pass California drill hole, 4 km northeast of the San Andreas fault (SAF), and 1 km north of the Cleghorn fault, to perform a systematic structural analysis of deformation and alteration associated with strike-slip faulting at the site. The core preserved 19 fault zones, 11 of which were not previously identified. The most significant fault is a fully intact steep-dipping fault zone at 3,402 m depth with potassium feldspar and epidote alteration. This fault correlates well with the nearby left-lateral Cleghorn fault. The extent of deformation varies within the core, and is controlled by the size of the fault zones intersected by the core. The extent of deformation varies and is controlled by the size of the faults the core intersected. We also examined the nature of right separation across the Clark fault damage zone along the Santa Rosa segment using a marker assemblage of biotite, hornblende-bearing tonalite - marble - bearing metasedimentary rocks - migmatite located in Coyote Mountain and the southeast Santa Rosa Mountains. Separation measured from this study is 16.8 km + 3.67 km / -6.03 km. Our measurement uses the updated location of the Clark fault in Clark Lake Valley and matches a distinctive lithologic contact across the fault instead of matching the diffuse western boundary of the Eastern Peninsular mylonite zone as previously used. We calculate the errors associated with projecting the contacts across Quaternary cover to the trace of the Clark fault, and consider a range of projections. Additional strain may have been accommodated in folds and small faults within the damage zone of the San Jacinto fault zone. Two large map-scale folds deform the marker assemblage near the San Jacinto fault zone and we tested whether Cretaceous ductile deformation or brittle late Quaternary right slip produced the folds.

The aim of the San Andreas Fault Observatory at Depth (SAFOD) project, a component of the NSF Earthscope Initiative, is to directly observe active fault processes at seismogenic depths through the drilling of a 3 km deep (true vertical depth) inclined borehole across San Andreas fault. Preliminary subsurface models based on surface mapping and geophysical data predicted different lithologies than were actually encountered. At 1920 meters measured depth (mmd), a sequence of well-indurated, interbedded arkosic conglomerates, sandstones, and siltstones was encountered. We present a detailed lithologic and structural characterization as a step toward understanding the complex geologic history of this fault-bounded block of arkosic sedimentary rocks. We divide the arkosic section into three lithologic units with different compositional, structural, and sedimentary features: the upper arkose, 1920-2530 mmd, the clay-rich zone, 2530-2680 Illtlld, and the lower arkose, 2680-3150 mmd. We interpret the section to have been deposited in a Salinian transtensional basin, in either a subaqueous or subaerial fan setting. We suggest four different possibly equivalent sedimentary units to the SAFOD arkoses, the locations of which are dependent on how the San Andreas fault system has evolved over time in the vicinity of the SAFOD site. Detailed analysis of three subsidiary faults encountered in the arkosic section at 1920 mmd, 2530 mmd, and 3060 mmd, shows that subsurface faults have similar microstructures and composition as exhumed faults at the surface, with less evidence of alteration from extensive fluid flow.

The launch of Sentinel-1A/B satellites in 2014 and 2016 marked a pivotal moment in Synthetic Aperture Radar (SAR) technology, ushering in a golden era for SAR. With a revisit time of 6–12 days, these satellites facilitated the acquisition of extensive stacks of high-resolution SAR images, enabling advanced time series analysis. However, processing these stacks posed challenges like interferometric phase degradation and tropospheric phase delay. This study introduces an advanced Small Baseline Subset (SBAS) algorithm that optimizes interferometric pairs, addressing systematic errors through dyadic downsampling and Delaunay Triangulation. A novel statistical framework is developed for elite pixel selection, considering distributed and permanent scatterers, and a tropospheric error correction method using smooth 2D splines effectively identifies and removes error components with fractal-like structures. Beyond geodetic technique advancements, the research explores geological phenomena, detecting five significant slow slip events (SSEs) along the Southern San Andreas Fault using multitemporal SAR interferometric time series from 2015-2021. These SSEs govern aseismic slip dynamics, manifesting as avalanche-like creep rate variations. The study further investigates Managed Aquifer Recharge (MAR) as a nature-engineering-based solution in the Santa Ana Basin. Analyzing surface deformation from 2004 to 2022 demonstrates MAR's effectiveness in curbing land subsidence within Orange County, CA. Additionally, MAR has the potential to stabilize nearby faults by inducing a negative Coulomb stress change. Projecting into the future, a suggested 2% annual increase in recharge volume through 2050 could mitigate land subsidence and reduce seismic hazards in coastal cities vulnerable to relative sea level rise. This integrated approach offers a comprehensive understanding of geological processes and proposes solutions to associated risks. / Doctor of Philosophy / The launch of Sentinel-1A/B satellites in 2014 and 2016 marked a big step forward in radar technology, especially Synthetic Aperture Radar (SAR). These satellites, which revisit the same area every 6-12 days, allowed us to collect many high-quality radar images. This helped us study changes over time in a more advanced way. However, there were challenges in handling all these images, like errors in the radar signals and delays caused by the Earth's atmosphere. We devised a smart algorithm based on the Small Baseline Subset (SBAS) to tackle these challenges. It helps optimize how we use pairs of radar images, reducing errors. We also developed a new method to pick the best pixels in the images and corrected errors caused by the atmosphere using mathematical methods. Moving beyond just technology, our research also looked at interesting Earth events. We found five major slow slip events along the Southern San Andreas Fault by studying radar data from 2015 to 2021. These events are like slow-motion slips along the fault, influencing how the ground moves. We also explored Managed Aquifer Recharge (MAR) as a solution in the Santa Ana Basin. By studying ground movement from 2004 to 2022, we found that MAR helped prevent the land from sinking in Orange County, California. It even has the potential to make nearby faults more stable. Looking ahead, increasing MAR activities by 2% each year until 2050 could protect against land sinking and reduce earthquake risks in coastal cities facing rising sea levels. This combined approach gives us a better understanding of Earth's processes and suggests ways to tackle related problems.

No description available.

No description available.

The Pacific-North American plate boundary is typified by transpression and convergence, yet the relationship between interplate deformation and long-term crustal shortening is not fully understood. The continuous belt of rugged topography that extends along the entire plate boundary is generally associated with oblique tectonic plate motion, strong interplate coupling, and terrane accretion, but relating plate boundary orogenesis to variations in plate geometry and behavior requires detailed case studies. The northern San Gabriel Mountains along the San Andreas fault and the Chugach-Kenai Mountains above the Aleutian subduction zone are located along highly tectonically active sections of the Pacific-North American plate boundary and have not been studied from the context of long-term landscape development. To determine whether mountain building along these sections of the plate boundary reflects recent, rapid exhumation as observed in bordering mountain belts, low-temperature thermochronometry and topographic analyses were applied to each area. In the northern San Gabriel Mountains, apatite (U-Th)/He ages are >10 Ma along narrow crystalline ridges topped by low-slope erosional surfaces located within ~5 km of the San Andreas fault zone. In the Chugach-Kenai Mountains, the youngest apatite (U-Th)/He ages (~5 Ma) are an order of magnitude older than those from the Yakutat collision zone to the east, despite the presence of a continuous swath of glaciated, rugged topography between the two areas. Exhumation rates inferred from these ages are <1 mm/yr, suggesting that there has been minimal recent denudation in the northern San Gabriel and Chugach-Kenai Mountains. The lack of evidence for recent mountain building in both of these case studies implies that interplate deformation is heterogeneous and that other factors (secondary structures, climate) besides plate kinematics and topographic character must be considered for understanding landscape development. / Ph. D.

abstract: The movement between tectonic plates is accommodated through brittle (elastic) displacement on the plate boundary faults and ductile permanent deformation on the fault borderland. The elastic displacement along the fault can occur in the form of either large seismic events or aseismic slip, known as fault creep. Fault creep mainly occurs at the deep ductile portion of the crust, where the temperature is high. Nonetheless, aseismic creep can also occur on the shallow brittle portion of the fault segments that are characterized by frictionally weak material, elevated pore fluid pressure, or geometrical complexity. Creeping segments are assumed to safely release the accumulated strain(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992)(Kodaira et al., 2004; Rice, 1992) on the fault and also impede propagation of the seismic rupture. The rate of aseismic slip on creeping faults, however, might not be steady in time and instead consist of successive periods of acceleration and deceleration, known as slow slip events (SSEs). SSEs, which aseismically release the strain energy over a period of days to months, rather than the seconds to minutes characteristic of a typical earthquake, have been interpreted as earthquake precursors and as possible triggering factor for major earthquakes. Therefore, understanding the partitioning of seismic and aseismic fault slip and evolution of creep is fundamental to constraining the fault earthquake potential and improving operational seismic hazard models. Thanks to advances in tectonic geodesy, it is now possible to detect the fault movement in high spatiotemporal resolution and develop kinematic models of the creep evolution on the fault to determine the budget of seismic and aseismic slip. In this dissertation, I measure the decades-long time evolution of fault-related crustal deformation along the San Andrea Fault in California and the northeast Japan subduction zone using space-borne geodetic techniques, such as Global Positioning System (GPS) and Interferometric Synthetic Aperture Radar (InSAR). The surface observation of deformation combined with seismic data set allow constraining the time series of creep distribution on the fault surface at seismogenic depth. The obtained time-dependent kinematic models reveal that creep in both study areas evolves through a series of SSEs, each lasting for several months. Using physics-based models informed by laboratory experiments, I show that the transient elevation of pore fluid pressure is the driving mechanism of SSEs. I further investigate the link between SSEs and evolution of seismicity on neighboring locked segments, which has implications for seismic hazard models and also provides insights into the pattern of microstructure on the fault surface. I conclude that while creeping segments act as seismic rupture barriers, SSEs on these zones might promote seismicity on adjacent seismogenic segments, thus change the short-term earthquake forecast. / Dissertation/Thesis / Doctoral Dissertation Geological Sciences 2018

An earthquake is a mechanism of stress release along plate boundaries due to relative motion between the Earth's lithospheric blocks. The period in which stresses are accruing across the plate boundary is known as the interseismic portion of the earthquake cycle. This dissertation focuses on interseismic portion of the earthquake cycle to extract characteristics of fault, shear zone and rock properties. Global Positioning System (GPS) data are used to observe the pattern of deformation across two primarily strike-slip fault systems: the Carrizo Segment of the San Andreas Fault (SAF) and the Eastern California Shear Zone (ECSZ). Two sets of GPS data are processed, analyzed and applied to analytic and numerical models describing the interseismic behavior of the earthquake cycle. The Carrizo segment is mature (i.e., had many earthquakes) and has juxtaposed terrains with varying rock properties laterally across the fault system. Lateral variations in rock properties affect the pattern of deformation around strike-slip faults and affect how surrounding rock deforms and if not considered may bias the interpretation of the faulted system. The Carrizo segment separates Franciscan terrain northeast of the fault from Salinian block to the southwest. GPS data are well fit to a model with a 15-25 km weak zone northeast of the Carrizo segment. The long-term slip rate estimated on the SAF is 34-38 mm/yr, with 2-4 mm/yr accommodated on faults to the west. The viscosity for the combined lower crust/upper mantle is estimated at 2-5x10^19 Pa s. This model is consistent with the distribution of rock type and corresponding laboratory data on their material properties, paleoseismic, seismic and magnetotelluric data. The ECSZ is a young (<10 >Myr) system of strike-slip faults including the Owens Valley - Airport Lake, Panamint Valley - Ash Hill - Hunter Mountain and Death Valley - Furnace Creek fault systems. The ECSZ study concentrates on fault evolution by finding the current position of maximum shear across the shear zone and estimating fault rates. Geologic studies suggest that the Death Valley - Furnace Creek fault system on eastern end of the ECSZ was the primary accommodator of slip early in the ECSZ history. This study suggests that the current locus of shear has shifted westward, and resides in the center of the ECSZ under the Panamint Valley - Ash Hill -Hunter Mountain fault system. The model dependent estimated geodetic rate of the Ash Hill - Panamint Valley -Hunter Mountain fault system (4.91-6.11 mm/yr) is faster than geologic estimates (1.6 - 4 mm/yr). The result is interpreted as a simplification of the ECSZ with time, combined with progressive westward migration of deformation. The best estimate for a combined rate across the shear zone is 10 mm/yr (20% of total Pacific-North America motion). The summation of rates obtained by this study is 49 mm/yr, well within estimates obtained by previous studies using independent techniques.