Multiple geophysical and geological data sets were compiled, reprocessed, and interpreted using state-of-the-art signal processing and modeling algorithms to characterize the complex post-Paleozoic geology that overlies the southwestern projection of the Fluorspar Area Fault Complex (FAFC) in western Kentucky. Specific data included 21.5 km of SH-wave seismic reflection, 1.5 km of P-wave seismic reflection, 2 km of electrical resistivity, vertical seismic profiles, Vp and Vs sonic-suspension logs, and 930 lithologic borehole logs. The resultant model indicates three general northeast–southwest-oriented fault zones pass through the study area as southwestern extensions of parts of the FAFC. These fault zones form two significant subparallel grabens with ancillary substructures. The geometry of the interpreted fault zones indicates that they have undergone episodic tectonic deformation since their first formation. Evidence of thickening and steeply dipping reflectors within Tertiary and Quaternary sediment in the downthrown blocks indicate syndepositional movement. Subtle thickening and lack of steeply dipping intraformational reflectors in the Cretaceous suggest a more quiescent period, with sediment deposition unconformably draping and filling the earlier Paleozoic structural surface. There is also evidence that the Tertiary and early Quaternary reactivation was associated with an extensional to compressional regional stress reversal, as manifested by the antiformal folds seen in the hanging wall reflectors and the potential small-amplitude force folds in the Quaternary alluvium, as well as a clear displacement inversion along the Metropolis-loess seismic horizon in two high-resolution reflection images. A surface shear-wave splitting experiment proved to be an efficient and effective tool for characterizing shallow subsurface azimuthally anisotropic geologic inclusions in low-impedance water-saturated sediment environments. The measured azimuthal anisotropy across a well-constrained N60ºE-striking fault exhibited a natural coordinate system that had a fast direction coincident with the fault strike and an orthogonal slow direction. This is also one indicator that faults inactive during significant geologic intervals (i.e., Holocene) do not "heal". Integrated shear-wave velocity models and electrical resistivity tomography profiles across the fault zones exhibit lower shear-wave velocities and resistivities within the deformation zones compared with values outside the boundaries. This is additional evidence that the deformed sediment does not reconsolidate or heal, but that the sediment particle configuration remains more loosely packed, providing an increase in the overall porosity (i.e., hydraulic conductivity). This can wholly or in large part explain the anomalous contaminant plume migration path that is coincident with the deformed zones of the regional gravel groundwater aquifer.

In this thesis I address the problem of determining fracture properties of subsurface rocks from geophysical surface seismic and vertical seismic profile (VSP) data. In the first part of this thesis I perform multi-attribute analysis, including frequency content, amplitude, travel time and angle of rotation studies on field VSP data from two different carbonate fields, both containing time-lapse surveys. I compare the findings to independent data available in the region and find that the interpreted fracture orientations from the attribute analyses correlate with independent fracture studies in the area, the principal axis of major faults, or the maximum horizontal stress of the area studied. Although I show the existence of these correlations, due to the limited knowledge of the rock properties, these correlations are only qualitative. A more robust inversion of fracture properties requires more knowledge of the physical properties of the medium and forward modelling of the seismic response. A rock physics theory would be required to model the elastic response of the fractured rock; hence a more quantitative fracture characterisation is necessary. In the second part of this thesis I address this need by developing and testing a method for fracture density inversion. Linearised approximations are commonly used in azimuthal amplitude versus offset (AVO) analysis. However, these approximations perform poorly at large angles of incidence where the effect of fractures is more significant. The method proposed here uses a model based approach that does not use these approximations but calculates the exact azimuthal AVO response based on prior knowledge of the elastic constants of the medium, assumed to be known, and a range of fracture densities. A rock physics theory is used for modelling the elastic constants of the fractured rock. I then create a linearized relationship for a specific model that separates the effect due to fracture density from the modelled AVOZ responses. This separation is key to the method, as it provides both a new set of orthogonal basis functions that can be used to express the AVOZ response of field data, and a set of coefficients that are related to fracture density. In general, the inversion is based on these coefficients. The coefficient or coefficients which present the highest correlation with fracture density must be determined on a case by case basis, as they will vary depending on the contrast between the elastic constants across the boundary of interest. I develop and test the method on synthetic surface seismic data and then apply it to seismic data acquired from a laboratory-scale physical geological model. Due to the prior knowledge of the rock properties and structure of the physical geological model, I am able to corroborate that the inverted fracture density from the seismic data matches that of the physical model within the error. I compare the inversion for two different levels of uncertainty in the velocities and densities of the modelled reflection coefficients and show that the inversion results are more precise and accurate when there is less uncertainty in the rock properties of the modelled reflection coefficients. In both the synthetic and physical geological model studies I find that the inversion is optimal for a certain range of offsets/angles of incidence. This means that the optimal range for inversion must be found on a case by case basis, as it depends on the behaviour of the data. Finally, as the inversion relies on the input modelled azimuthal AVO curves, a careful choice of the input rock properties is essential for the inversion process. The inverted fracture density values will only be valid if the rock properties of the field data fall within the range of the modelled ones. This is a limitation of the method, as adequate knowledge of the rock properties is not always available.

No description available.

Wellbore seismic measurements were recorded in the Lake Bosumtwi impact structure, Ghana, in 2004. A full range of petrophysical measurements were also performed in the laboratory on core samples from the same boreholes. The Vertical Seismic Profile shows low velocities for both P and S waves in the hardrock basement of the crater. Although we were expected to locate fractures within the rock, no upgoing waves were detected. Density and porosity measurements on the core samples indicate higher than normal porosity in the impact damaged rocks. Mercury porosimetry and SEM analysis characterized the pores as impact induced microcracks. These microcracks are most likely the reason for the low velocities observed on the seismic profiles, the in situ sonic logs, and the seismic velocity measurements on the core samples. Furthermore our laboratory P and S velocities measurements indicate a strong heterogeneity within the impactites. / Geophysics

<p dir="ltr">The Kentland Impact Structure is a heavily eroded complex impact crater located in NW Indiana. Despite numerous previous geophysical investigations, the dimensions of the crater have remained unknown. Based on the findings of those studies, it was noted that a disturbed area reached radially outward 6 – 6.5 km from the central peak of the crater, leading to it being documented as a 12.5 – 13 km diameter crater despite lack of further supporting evidence. We conducted a high-resolution active source seismic reflection survey to delineate the crater’s outer faults and boundaries and refine its diameter estimation. Over 300,000 source-receiver arrival times were picked from the dataset, which formed the foundation for constructing a comprehensive tomographic velocity model. This model was used to guide the structural processing of the reflection profile. To aid in the interpretation of the seismic profile, we utilized a reference borehole located near the survey area to identify the local stratigraphy and geologic reflectors. We also digitized Tudor’s (1971) gravity data, which provided valuable support for our tomographic model and processed seismic profile. The seismic profile and tomography revealed a low velocity, ‘seismically transparent’ central zone that matches up with the edge of the moat identified in the digitized gravity data. The reflectors to the right of the central zone remain undisturbed and the gravity data shows no signs of disturbance beyond the rim of the moat. The work carried out provides extensive evidence that the apparent diameter of the crater is ~8.6 km.</p>

L'inversion des marges passives apparaît comme le premier stade vers l'initiation de nouvelles zones de subduction. Cette étape cruciale dans la tectonique des plaques soulève néanmoins encore de nombreuses questions. L'étude des marges actuellement réactivées en compression apparaît ainsi comme essentielle pour mieux comprendre ce processus. Ces marges sont peu nombreuses, situées dans des contextes géodynamiques variés, et les facteurs déterminant leur évolution mal contraints. Située au nord de l'Afrique, la marge algérienne fait partie de ces rares exemples potentiels à travers le monde. L'évolution de cette marge formée au Miocène en contexte d'arrière-arc s'intègre dans le puzzle complexe de l'histoire de la Méditerranée occidentale. Elle est depuis quelques millions d'années réactivée en compression dans le cadre de la convergence lente entre les plaques européenne et africaine, générant un potentiel sismogène fort au nord de l'Algérie. La relative jeunesse du bassin algérien, la charge sédimentaire, les forces aux limites compressives, constituent des conditions favorables à la formation d'une future subduction. A la suite des travaux menés depuis une dizaine d'années, les principales lacunes de connaissances identifiées portent sur (1) la structuration profonde du bassin algérien et de sa marge sud (type de marge, nature du socle,dimension et nature de la transition océan-continent, style et distribution de la déformation compressive), et (2) l'histoire de l'évolution cinématique et géodynamique du bassin, ce qui limite à l'heure actuelle une analyse approfondie des modalités d'inversion de cette marge. L'étude menée se focalise sur la marge centre-algérienne, dans le secteur de Tipaza (à l'ouest d'Alger), un endroit clé pour la compréhension des mécanismes d'ouverture du bassin algérien. Le traitement et l'analyse de nouvelles données de sismique profonde grand-angle et multitraces acquises dans le cadre du projet franco-algérien SPIRAL (Sismique Profonde et Investigations Régionales en Algérie, 2009) ont notamment permis de déterminer la structure crustale du bassin algérien et de sa marge sud, ainsi que la structuration pseudo-3D d'une structure spécifique au secteur d'étude constituée par le haut topographique sous-marin de Khayr-al-Din. L'analyse de la structure profonde de la marge indique un certain nombre de structures héritées de son évolution complexe : (1) une croûte de nature continentale de plus de 15 km d'épaisseur sur le haut de marge (banc de Khayr-al-Din), (2)une croûte fine de nature océanique de 5-6 km d'épaisseur dans le bassin incluant des vitesses légèrement élevées à sa base (7,2 km/s - 7,3 km/s), (3) des similitudes avec des marges formées dans des contextes de déformation transformante, (4) un approfondissement progressif de l'ensemble de la pile sédimentaire et l'épaississement des sédiments Plio-Quaternaire, depuis le bassin profond distal vers le pied de marge,coïncidant avec (5) une flexuration à grande longueur d'onde du socle. Les résultats obtenus apportent de nouvelles contraintes sur (1) la géométrie et la nature de la marge et du bassin, (2) l'évolution de la marge,suggérant une histoire multiphasée comprenant un stade de rifting et/ou d'accrétion océanique, suivi d'un épisode de déformation coulissante tardive liée à la migration du bloc Alboran vers l'ouest, et d'une reprise en compression distribuée du bassin profond au haut de la marge au Plio-Quaternaire; (3) les modalités de réactivation qui se traduisent par des chevauchements aveugles néoformés à pendages sud, notamment au pied du banc de Khayr-al-Din, suggérant un soulèvement du banc de 0,2 mm/an à 0,75 mm/an au Plio-Quaternaire et un début d'écaillage crustal. / The inversion of passive margins appears to be one of the first steps towards the initiation of new subduction zones. This crucial step in plate tectonics nevertheless still raises many questions. The study of margins currently reactivated by compressional tectonics is thus essential to better understand this process. These margins are uncommon, located in different geodynamic settings, and the factors determining their evolution are poorly constrained. The Algerian margin, located in North Africa, is one of handful of modern examples worldwide. The evolution of this margin, rifted during the Miocene, in a back-arc setting, is part ofthe complex puzzle of the western Mediterranean. Since a few million years, the margin has suffered inversion and compression in the framework of slow on going convergence between the European and African plates. This convergence generates moderate to strong earthquakes in North Algeria. The relatively young age of the Algerian basin, the large sediment load, and the compressive forces, constitute favorable conditions to the formation of a future subduction zone. Studies from the past ten years indicate, that themain unresolved questions are related to (1) the deep structure of the Algerian basin and its southern margin (the type of margin, the nature of the basement, the dimension and nature of the ocean-continent transition, the style and the distribution of the compressional deformation), and (2) the history of the kinematic and geodynamic evolution of the basin. All of these unknowns have prevented a complete and thorough analysis of modalities of the Algerian margin inversion. This study focuses on the Central Algerian margin, in the area of Tipaza (West of Algiers), a key region to understand the mechanism of the opening of the Algerian basin. Processing and analysis of a deep wide-angle and multichannel seismic new data set acquired in the context of the French-Algerian project SPIRAL (Sismique profonde et Investigation Régionales en Algérie, 2009)have enabled us to determine the crustal structure of the Algerian basin and its southern continental margin,as well as the pseudo-3D structure of a specific feature in the study area: the submarine topographic highformed by the Khayr-al-Din bank. The analysis of the deep structure of the margin reveals features inherited from its complex evolution: (1) a crust of continental nature of more than 15 km thick at the upper margin(Khayr-al-Din Bank), (2) a thin crust of oceanic nature, 5-6 thick in the deep basin, including slightly high velocities at its base (7.2 km/s - 7.3 km/s), (3) similarities with margins formed in context of transform deformation, (4) a progressive deepening of the whole sedimentary cover and the thickening of the Plio-Quaternary sediments, from the distal deep basin towards the margin foot, coeval with (5) a long wavelengthflexuration of the basement in the basin. Results from this study provide new constraints on (1) the geometryand nature of the margin and the basin, (2) the evolution of the margin, suggesting a multiphased history including a stage of rifting and/or oceanic spreading, a transcurrent episode due to the westward migration of the Alboran block, and a diffuse Plio-Quaternary compressional reactivation distributed from the deep basinto the upper margin; (3) the mechanisms of the reactivation marked by newly formed south-dipping blind-thrusts, especially at the foot of the Khayr-al-Din bank, and suggesting a Plio-Quaternary uplift of the bankof 0.2 mm/y to 0.75 mm/y and the early stages of imbricate thrusting of crustal scales.

Le basin du Qaidam, situé sur la bordure nord du Plateau Tibétain est unique au monde en ce qu’il représente le bassin intracontinental le plus profond bien que situé sur le plus haut plateau et la plus épaisse croute continentale actuels. Comprendre le développement et l’évolution de ce bassin en lien avec la collision Inde-Asie a des implications multiples pour la géologie du Tibet en particulier et la tectonique continentale en général. De nombreuses études incluant de la thermochronologie, de la paléobotanique, du paléomagnétisme, de la paléoaltimétrie, de la sédimentologie et de la géologie structurale se sont intéressées à l’histoire tectonique et topographique de cette région. Toutefois la topographie initiale de la région actuellement représentée par le Plateau Tibétain ainsi que les premiers stades de développement du plateau restent méconnus et très débattus. Les travaux présentés ici sont basés sur des données de terrain, de sismique 2D et 3D, de géochimie, de géochronologie détritique, de sédimentologie et d’analyse d’images satellitaires. Ils décrivent: 1) l’évolution cénozoïque conjointe du bassin du Qaidam et de la chaine des Eastern Kunlun ; 2) les relations entre la sédimentation dans le bassin du Qaidam et la tectonique le long de la faille de l’Altyn Tagh ; 3) une estimation quantitative de l’extrusion latérale du nord Tibet les long du système Altyn Tagh – Qilian Shan ; 4) la nature et la typologie du bassin du Qaidam. Je démontre que la chaîne du Kunlun formait un relief en érosion au Paléocène et que la zone de dépôt du bassin du Qaidam s’est élargie vers le sud jusqu’à l’Oligocène. Dès le Miocène inférieur le SO du bassin du Qaidam était limité par un système tectonique décrochant. L’accroissement du relief dans les chaines du Kunlun et de l’Altyn Tagh entraine alors un isolement puis un rétrécissement du bassin. Je suggère que la faille de l’Altyn Tagh qui forme la bordure nord du Plateau, a accommodé environs 360 km de déplacement depuis sont initiation au Miocène inférieur. Cette déformation est prise en compte par du décrochement et de l’épaississement dans les Qilian Shan, de l’épaississement crustal dans les Qinling et de l’extension dans le système de grabens de Chine du Nord. Enfin, je conclu que le bassin du Qaidam est contrôlé conjointement par les failles décrochantes de l’Altyn Tagh et du Kunlun Est. La superposition dans le temps et l’espace des effets de ces deux décrochements majeurs durant le Cénozoïque a contrôlé l’évolution du bassin et la répartition des réserves d’huile et de gaz. / The Qaidam basin, located within the northern Tibetan plateau, is the deepest intracontinental basin, yet located in the highest plateau with the thickest continental crust. Understanding how this peculiar basin developed has broad implications for the Tibetan geology in particular and for continental tectonics in general. Many approaches have been used to decipher the tectonic and topographic history of that region, however, the initial topography of the area now represented by the northern Tibetan plateau, as well as the early stages of development of the present day topography remain poorly constrained and highly debated. In order to better understand the Cenozoic evolution of the Qaidam basin and its surrounding regions (including Eastern Kunlun Range to the south, Altyn Tagh Range to the northwest, and Qilian Shan to the northeast), four critical issues are addressed in this thesis: 1) the Cenozoic joint tectonic evolution of the Qaidam basin and the Eastern Kunlun Range; 2) the interplay between the sedimentation within the Qaidam basin and the active tectonics within the Altyn Tagh Range; 3) a quantitative estimate of the lateral extrusion along the Altyn Tagh Fault-Qilian Shan tectonic system; 4) the nature and classification of the Qaidam basin. I suggest that the SW Qaidam basin has been bordered by a series of strike-slip faults to the south since the Early Miocene, rather than, as previously suggested by a continuous northward or southward thrusting system. Based on U-Pb dating (LA-ICP-MS) of detrital zircons collected from 4 sections (Paleocene to Holocene) within the southwestern Qaidam basin combined with provenance analysis and new seismic profile interpretation, I demonstrated that the Eastern Kunlun Range was already exhumed prior to the Paleocene. I show that the Qaidam basin was widening southward during thet early Cenozoic period (Paleocene to Oligocene). From Oligocene the relief of the Eastern Kunlun and Altyn Tagh ranges increased, leading to isolation and narrowing of the Qaidam basin from Miocene to the present. Along the northern edge of the basin, I identified the Tula-Huatugou and Anxi-Eboliang regions as residual parts of the original Qaidam basin. I suggest that the Altyn Tagh Fault has experienced a total of ~360 km of displacement since its Early Eocene initiation. Based on this ~360 km northeastward migration of the relatively rigid Qaidam block along the Altyn Tagh Fault and 3D isovolumetric balance of the crustal deformation within the Altyn Tagh Fault – Qilian Shan system, I demonstrate that 250 ± 28 km (43.8~49.4 %) of N20E directed crustal shortening and an additional ~250 to ~370 km of eastward motion of the Qilian Shan crust must be accounted for by strike-slip faulting in the Qilian Shan and crustal thickening in the Qinling area, as well as extension in the adjoining North China block graben systems.

Cette thèse a été conduite dans le cadre du programme de coopération de recherche Algéro-française SPIRAL (Sismique Profonde et Investigations Régionales du Nord de l’Algérie). Ce projet vise à étudier la structure profonde de la marge algérienne par une approche combinée des techniques sismiques ; grand-angle et multi-canal. Le domaine couvert par la présente étude se concentre dans la région de Jijel dans la marge algérienne orientale. L’objectif principal de notre thèse est d'améliorer en profondeur l'imagerie de la marge algérienne en utilisant une combinaison de données sismiques grand-angle (OBS, sismomètres de fond de l'océan) et multi-canal (MCS). Le but de cette thèse est d'apporter de nouvelles connaissances pour répondre à quelques questions sur la nature de la croûte terrestre, la zone de transition continentale-océanique, la présence du sel messénien, sa distribution et sa relation entre les formations sédimentaires superficielles et les structures crustales. Dans cette étude, notre approche est une inversion jointe des enregistrements grand-angle et des données sismiques multi-canal. Nous avons conduit une série de tomographie des premières arrivées, une inversion jointe des arrivées réfractées et réfléchies ainsi qu’une modélisation gravimétrique. Etant donné que la solution du problème inverse n’est pas unique, deux programmes de tomographie ont été utilisés sur les mêmes données pour la même région d’étude à savoir : FAST (First Arrival Seismic Tomography) et Tomo2D. La tomographie a été suivie par une inversion jointe des arrivées réfractées et réfléchies suivant une approche basée sur la combinaison de la migration en profondeur « Kirchhoff » avant sommation (PSDM) des données de sismique réflexion multi-canal (MCS) et la modélisation directe des enregistrements grand-angle sur le fonds marin (OBS). Afin de vérifier la consistance du modèle de la vitesse avec les données gravimétriques, l’anomalie à l'air libre a été modélisée. Les résultats de l’imagerie conduite dans ce travail montrent la structure de la marge, la croûte continentale, la zone de transition continent-océan et la croûte océanique de la Méditerranée. La structure du modèle confirme les études antérieures basées sur des données bathymétriques, gravimétriques et magnétiques. Cette structure montre essentiellement : - un plateau continental étroit et pente continentale une très raide.- l’Expulsion du sel vers le nord impliquant la formation de diapirs au-dessus du flanc nord du bassin (plaine abyssale).- L’approfondissement et l’épaississement des séquences sédimentaires (bassin sédimentaire) près de la marge algérienne. Le modèle de vitesses obtenu et l’épaisseur des différentes unités structurales formant ce modèle apportent des arguments quantitatifs pour enrichir la connaissance de cette partie de la Méditerranée occidentale. Les couches sédimentaires dans le bassin montrent des vitesses sismiques allant de 1,9 km / s à 3,8 km / s. Les formations messéniennes ont été modélisées en utilisant une vitesse située entre 3,7 km / s à 3,8 km / s. La croûte continentale s’amincit sur une bande étroite de la marge dont la distance est d'environ 15 km. La vitesse de la croûte océanique dans cette région présente deux couches distinctes : l’une caractérisée par des vitesses variant de 4,7 km / s à 6.1 et l’autre de 6.2 à 7.1 km / s. La vitesse du manteau supérieur quant à elle a été modélisée par 7,9 km / s. / This thesis has been conducted within the framework of the Algerian-French research cooperation program SPIRAL (Sismique Profonde et Investigations Régionales du Nord de l’Algérie). This project aims to study the deep structure of the Algerian margin. The area covered by this study focuses in the region of Jijel in eastern Algerian margin.The main objective of our thesis is to improve depth imaging of the Algerian margin using a combined approach of seismic techniques; wide-angle and multi- channel seismic data. The purpose of this thesis is to bring new knowledge to answer some questions about the nature of the crust, the area of continental -oceanic transition, the presence of Messinian salt, its distribution and relationship between surface sedimentary formations and crustal structures.This study presents the results of a deep seismic survey across the north Algerian margin, based on the combination of 2D multi-channel and wide-angle seismic data simultaneously recorded by 41 ocean bottom seismometers deployed along a North-South line extending 180 km off Jijel into the Algerian offshore basin, and 25 land stations deployed along a 100 km-long line, cutting through the Lesser Kabylia and the Tellian thrust-belt.In this study, our approach is a joint inversion of wide-angle seismic recordings (OBS, ocean bottom seismometers) and multi- channel seismic data (MCS). We conducted a series of first arrivals tomography, a joint inversion of reflected and refracted arrivals and gravity modelling. Since the solution of the inverse problem is not unique, two tomography programs were applied using the same data for the same study area; FAST (First Arrival Seismic Tomography) and Tomo2D. Tomography was followed by a joint inversion of reflected and refracted arrivals following an approach based on the combination of Kirchhoff prestack depth migration (PSDM) for MCS data and forward modelling of OBS. To check the consistency of the velocity model with gravity data, the free air anomaly was modeled.The final model obtained using forward modelling of the wide-angle data and pre-stack depth migration of the seismic reflection data provides an unprecedented view of the sedimentary and crustal structure of the margin. The sedimentary layers in the Algerian basin are 3.75 km thick to the north and up to 4.5 to 5 km thick at the foot of the margin. They are characterised by seismic velocities from 1.9 km/s to 3.8 km/s. Messinian salt formations are about 1 km thick in the study area, and are modelled and imaged using a velocity between 3.7 km/s to 3.8 km/s. The crust in the deep sea basin is about 4.5 km thick and of oceanic origin, presenting two distinct layers with a high gradient upper crust (4.7 km/s - 6.1 km) and a low gradient lower crust (6.2 km/s - 7.1 km/s). The upper mantle velocity is constrained to 7.9 km/s. The ocean-continent transition zone is very narrow between 15 km to 20 km wide. The continental crust reaches 25 km thickness as imaged from the most landward station and thins to 5 km over a less than 70 km distance. The continental crust presents steep and asymmetric upper and lower crustal geometry, possibly due to either asymmetric rifting of the margin, an underplated body, or flow of lower crustal material towards the ocean basin. Present-time deformation, as imaged from 3 additional seismic profiles, is characterized by an interplay of gravity-driven mobile-salt creep and active thrusting at the foot of the tectonically inverted Algerian margin.