Spelling suggestions: "subject:"semiconductors functionations"" "subject:"semiconductors functionizations""
11 |
Investigation of transport mechanisms for n-p-n InP/InGaAs/InP double heterojunction bipolar transistorsHe, Jianqing 08 September 2012 (has links)
A more complete model for InP/InGaAs Double Heterojunction Bipolar Transistors (DHBT) is obtained in this thesis by physically analyzing the transport process of the main current components. The potential distribution of the energy barrier constitutes a fundamental analytical concept and is employed for applying the diffusion, the thermionic emission, and the tunneling theories in investigating the injection mechanisms at the e-b heterojunction interface. The diffusion transport is considered first for electron injection from the emitter into the base. The thermionic emission is applied properly at the point of maximum potential energy as one of the boundary conditions at that interface. A suitable energy level is selected with respect to which the energy barrier expression is expanded for the calculation of the tunneling probability. The first "spike" at the conduction band discontinuity is described as the potential energy for the injected electrons to obtain kinetic energy to move into the base region with a substantially high Velocity. The electron blocking action of the second "spike" at the b–c junction is also analyzed by considering the transport Velocity with which electrons are swept out of that boundary. Based on the material parameters recently reported for both InP and InGaAs, computations of the nI current components are carried out to provide à characteristics in good agreement with the reported experimental results. / Master of Science
|
12 |
Semiconductor P-N Junction Space Charge Region CapacitanceHabib, Mohammad Humayun 04 December 1992 (has links)
The classical capacitance voltage characteristics based on the depletion approximation, is adequate at reverse bias, but introduces errors at high forward bias. Because of its inherent simplicity and compactness this classical depletion model is well studied and widely used in circuit simulators. In this work, a new model for the semiconductor space charge region (SCR) capacitance, based on physical justification, will be derived. This new model takes three input parameters, C0 , Vbi and m, thus eliminating the fitting parameter FC currently used in SPICE. This new model is applicable for any applied voltage and will be compared with the SCR capacitance extracted from the numerical device simulator PISCES, and with the SCR capacitance models proposed by Gummel and Poon and by DeGraaff and Klaassen.
|
13 |
Theoretical investigation of contact materials for emerging electronic and spintronic devicesNiranjan, Manish Kumar, 1977- 28 August 2008 (has links)
We present a theoretical study of the electronic structure, surface energies and work functions of orthorhombic Pt monosilicide and germanides of Pt, Ni, Y and Hf within the framework of density functional theory (DFT). Calculated work functions for the (001) surfaces of PtSi, NiGe and PtGe suggest that these metals and their alloys can be used as self-aligned contacts to p-type silicon and germanium. In addition, we also study electronic structure and calculate the Schottky-barrier height at Si(001)/PtSi(001) interface and GaAs(001)/NiPtGe(001) interfaces with different GaAs(001) and NiPtGe (001) terminations. The p-type Schottky barrier height of 0.28 eV at Si/PtSi interface is found in good agreement with predictions of a simple metal induced gap states (MIGS) theory and available experiment. This low barrier suggests PtSi as a low contact resistance junction metal for silicon CMOS technology. We identify the growth conditions necessary to stabilize this orientation. The calculated p-type Schottky barrier heights (SBH) at different GaAs/NiPtGe interfaces vary by as much as 0.18 eV around the average value of 0.5 eV. We further identify and discuss factors responsible for strong Fermi level pinning resulting in small variation in the p-SBH. We also present a theoretical study of magnetic state of [beta]-MaAs and show that it is antiferromagnetic and explain the lack of observed long-range order.
|
14 |
Characteristics of ZnOCuInSe2 heterojunctions and CuInSe2 homojunctionsQiu, C. X. (Xing Xing) January 1985 (has links)
No description available.
|
15 |
Characteristics of ZnOCuInSe2 heterojunctions and CuInSe2 homojunctionsQiu, C. X. (Xing Xing) January 1985 (has links)
No description available.
|
16 |
Photoinduced Transfer of Spin-Polarized Charges at Semiconductor InterfacesLiu, Yufeng January 2024 (has links)
Charge transfer at the organic/inorganic semiconductor interfaces lies at the heart of interfacial photochemistry. While decades of research have shaped the current understanding that interfacial charge transfer depends crucially on energetic driving force and electronic coupling, much less is known about the role played by the spin degree of freedom. In particular, it is not clear how spin states evolve during the charge transfer process. With the advent of group 6 transition metal dichalcogenides (TMDC), a class of two-dimensional layered materials which permits the optical generation of spin-polarized electron-hole pairs in the monolayer limit, we now have the opportunity to investigate if charge transfer at an organic/inorganic interface could enable the transfer of spin polarization.
Using time-resolved Faraday rotation and transient absorption spectroscopy, it is found in the MoSe₂/H₂Pc and C60/WS₂ heterostructures that the photoinduced hole transfer from MoSe₂ to H₂Pc and electron transfer from WS₂ to C60 results in spin polarization lifetimes one order of magnitude longer than that of a monolayer. In the WS₂/MoSe₂/H₂Pc heterostructure, the addition of a WS₂ monolayer drives the dissociation of electron-hole pairs bound at the MoSe₂/H₂Pc interface and leads to the observation of nanosecond-long spin polarization at room temperature. These findings evidence the photoinduced transfer of spin polarization, a mechanism which could potentially be exploited to enhance the efficiency and selectivity of photochemical reactions involving angular momentum change, and may be generalized to other organic/inorganic interfaces composed of crystalline semiconductors with spin-momentum locking.
|
17 |
Sulfide and UV/ozone treatments on III-V semiconductors =: 用硫及紫外光/臭氧處理III-V 族半導體. / 用硫及紫外光/臭氧處理III-V 族半導體 / Sulfide and UV/ozone treatments on III-V semiconductors =: Yong liu ji zi wai guang/xiu yang chu li III-V zu ban dao ti. / Yong liu ji zi wai guang/xiu yang chu li III-V zu ban dao tiJanuary 1998 (has links)
by Choy Wing Hong. / Thesis (M.Phil.)--Chinese University of Hong Kong, 1998. / Includes bibliographical references (leaves 95-102). / Text in English; abstract also in Chinese. / by Choy Wing Hong. / ABSTRACT --- p.vi / ACKNOWLEDGEMENTS --- p.x / LIST OF FIGURES --- p.xi / LIST OF TABLES --- p.xiii / Chapter Chapter 1 --- Introduction --- p.1 / Chapter 1.1 --- Background --- p.1 / Chapter 1.2 --- Surface passivation techniques --- p.2 / Chapter 1.2.1 --- Sulfide solution passivation --- p.2 / Chapter 1.2.2 --- Gas-phase sulfide passivation --- p.3 / Chapter 1.2.3 --- Ultra-violet and ozone exposure --- p.4 / Chapter 1.3 --- Surface structure of sulfide-passivated surface --- p.5 / Chapter 1.4 --- Surface structure of ultra-violet/ozone oxidation --- p.8 / Chapter 1.5 --- Objectives of present study --- p.10 / Chapter Chapter 2 --- Instrumentation --- p.12 / Chapter 2.1 --- Introduction --- p.12 / Chapter 2.2 --- Atomic force microscopy (AFM) --- p.12 / Chapter 2.2.1 --- The development of AFM --- p.12 / Chapter 2.2.2 --- Basic principles of AFM --- p.12 / Chapter 2.2.3 --- Forces and their relevance to atomic force microscopy --- p.13 / Chapter 2.2.3.1 --- Van Der Waals forces --- p.15 / Chapter 2.2.3.2 --- Repulsive forces --- p.15 / Chapter 2.2.3.3 --- Capillary forces --- p.15 / Chapter 2.2.4 --- Displacement sensor of AFM --- p.15 / Chapter 2.2.4.1 --- Electron tunneling --- p.16 / Chapter 2.2.4.2 --- Optical interference --- p.16 / Chapter 2.2.4.3 --- Laser beam deflection --- p.16 / Chapter 2.2.5 --- Instrument specification --- p.17 / Chapter 2.2.5.1 --- Contact mode AFM --- p.17 / Chapter 2.3 --- X-ray photoelectron spectroscopy --- p.19 / Chapter 2.3.1 --- The development of XPS --- p.19 / Chapter 2.3.2 --- Basic principles of XPS --- p.19 / Chapter 2.3.3 --- XPS experiments --- p.23 / Chapter 2.3.4 --- Quantitative analysis --- p.26 / Chapter 2.3.4.1 --- Atomic concentration of a homogenous materials --- p.26 / Chapter 2.3.4.2 --- Layer structure --- p.27 / Chapter 2.4 --- Rutherford backscattering spectrometry (RBS) --- p.29 / Chapter 2.4.1 --- Basic principles --- p.29 / Chapter 2.4.2 --- Kinematics --- p.29 / Chapter 2.4.3 --- Channeling --- p.31 / Chapter Chapter 3 --- Surface treatments --- p.32 / Chapter 3.1 --- Semiconductor wafer --- p.32 / Chapter 3.2 --- Cleaning procedures --- p.32 / Chapter 3.3 --- Polysulfide passivation --- p.34 / Chapter 3.4 --- UV/Ozone oxidation --- p.39 / Chapter Chapter 4 --- Surface roughness and oxide contents of sulfide passivation --- p.41 / Chapter 4.1 --- Introduction --- p.41 / Chapter 4.2 --- Experimental methodology --- p.42 / Chapter 4.3 --- Etching --- p.44 / Chapter 4.3.1 --- Etching effect of polysulfide solution --- p.45 / Chapter 4.3.2 --- Possible consequences of the etching effect --- p.45 / Chapter 4.4 --- Oxide contents --- p.47 / Chapter 4.4.1 --- Oxide gained during polysulfide solution treatment --- p.47 / Chapter 4.4.2 --- Oxide gained after polysulfide passivation --- p.47 / Chapter 4.5 --- Surface roughness --- p.49 / Chapter 4.5.1 --- Surface roughness after different passivation methods --- p.49 / Chapter 4.5.2 --- The sticking probability after different passivations --- p.51 / Chapter 4.6 --- The spiral ladder of solution-phase passivation --- p.55 / Chapter 4.7 --- Conclusions --- p.58 / Chapter Chapter 5 --- Sulfide on Ge/GaAs heterojunction --- p.59 / Chapter 5.1 --- Introduction --- p.59 / Chapter 5.1.1 --- Band structure of Ge/GaAs heteroj unction --- p.59 / Chapter 5.1.2 --- Lattice match of Ge/GaAs heteroj unction --- p.60 / Chapter 5.1.3 --- The growth of Ge on GaAs using molecular beam epitaxy --- p.62 / Chapter 5.2 --- The growth of Ge on GaAs using thermal pulse annealing --- p.63 / Chapter 5.3 --- Sulfide as an atomic interdiffusion barrier --- p.65 / Chapter 5.3.1 --- Experimental methodology --- p.65 / Chapter 5.3.2 --- Crystallinity of Ge --- p.67 / Chapter 5.3.3 --- Results and discussions --- p.67 / Chapter 5.3.3.1 --- RBS and XPS results --- p.67 / Chapter 5.3.3.2 --- AFM and I-V results --- p.71 / Chapter 5.4 --- Conclusions --- p.71 / Chapter Chapter 6 --- UV/03 on Ge/GaAs heterojunction --- p.72 / Chapter 6.1 --- Introduction of UV/o3 oxidation --- p.72 / Chapter 6.2 --- UV/o3 oxidation on GaAs --- p.74 / Chapter 6.3 --- Ge on UV/o3 treated GaAs --- p.76 / Chapter 6.3.1 --- Experimental methodology --- p.76 / Chapter 6.3.2 --- Crystallinity of Ge --- p.77 / Chapter 6.3.3 --- AFM results --- p.77 / Chapter 6.3.4 --- RBS results --- p.80 / Chapter 6.4 --- Diodes --- p.82 / Chapter 6.4.1 --- Fabrication of diode --- p.82 / Chapter 6.4.2 --- Diode characteristics --- p.84 / Chapter 6.4.3 --- I-V characteristics --- p.90 / Chapter 6.5 --- Conclusions --- p.90 / Chapter Chapter 7 --- Conclusion and future work --- p.93 / Chapter 7.1 --- Conclusions --- p.93 / Chapter 7.2 --- Future works --- p.94 / Reference --- p.95
|
18 |
Transport in graphene tunnel junctionsMalec, Christopher Evan 20 June 2011 (has links)
It has been predicted that gold, aluminum, and copper do not fundamentally change the graphene band structure when they are in close proximity to graphene, but merely increase the doping. My data confirms this prediction, as well as explores other consequences of the metal/graphene interface. First, I present a technique to fabricate thin oxide barriers between graphene and aluminum and copper to create tunnel junctions and directly probe graphene in close proximity to a metal. I map the differential conductance of the junctions versus tunnel probe and back gate voltage, and observe mesoscopic fluctuations in the conductance that are directly related to the graphene density of states. I develop a simple theory of tunneling into graphene to extract experimental numbers, such as the doping level of the graphene, and take into account the electrostatic gating of graphene by the tunneling probe. Next, results of measurements in magnetic fields will also be discussed, including evidence for incompressible states in the Quantum Hall regime wherein an electron is forced to tunnel between a localized state and an extended state that is connected to the lead. The physics of this system is similar to that encountered in Single Electron Transistors, and some work in this area will be reviewed. Finally, another possible method of understanding the interface between a metal and graphene through transport is presented. By depositing disconnected gold islands on graphene, I am able to measure resonances in the bias dependent differential resistance, that I connect to interactions between the graphene and gold islands.
|
Page generated in 0.0747 seconds