<p>Low-sensitivity switched capacitor filters imitating 'R','L' and 'C' can be built by means of capacitances, ordinary switches and voltage inverter switches (VIS). These structures carry the inherent bilinear transformation of their doubly resistively terminated ladder reference filters. This one to one correspondence between the 's-domain' and the 'z-domain' results in the Nyquist criterion being the only limitation on the sampling frequency. This eliminates the necessity for oversampling and VIS filters can be designed for high operating rates.</p><p>Filters based on VIS principle were analysed in previous literatures in the 'phi-domain'. In this thesis work, a successful attempt has been made to formulate an analysis procedure for discrete-time filters based on VIS principle in the 'z-domain'. Significant details have been brought out in comparison with the respective reference filter. A fifth-order lowpass filter has been designed and implemented to exhibit the closeness to the bilinearly transformed continuous-time reference filter. Settling time analysis has been done to justify the need for filters using VIS principle as compared to the filters employing integrator based switched capacitor filter. It is shown that VIS filter can be made to settle within half the period required for a conventional integrator based switched capacitor filter.</p>

<p>The marine sponge <i>Geodia barretti</i> produces a range of secondary metabolites. Two of these compounds were isolated and elucidated guided by their ability to inhibit settlement of cypris larvae of the barnacle <i>Balanus improvisus</i>. The compounds barettin (cyclo-[(6-bromo-8-en-tryptophan)-arginine]) as E/Z mixture and 8,9-dihydrobarettin (cyclo-[6-bromo-tryptophan)-arginine]) were determined by using mass spectrometry, nuclear magnetic resonance and quantitative amino acid analysis.The bioactivity of these brominated dipeptides is in the range of antifouling substances used today: EC₅₀ values of 0.9 µM (barettin) and 7.9 µM (8,9-dihydrobarettin). The compounds were successfully synthesised and then tested in a field experiment to evaluate their antifouling properties. The compounds were incorporated in four different commerical, non-toxic marine coatings. The concentrations of the compounds were 0.1 and 0.01% (w/w) and coated panels were exposed to field conditions for eight weeks. The experiment evaluated the effect of barettin and 8,9-dihydrobarettin on recruitment of the barnacle <i>B. improvisus</i> and the blue mussel <i>Mytilus edulis</i> (major Swedish foulers). The most efficient paint was a SPC polymer, for which the reduction of recruitment of <i>B. improvisus</i> was 89% with barettin (0.1%) and 61% with 8,9-dihydrobarettin (0.1%). For <i>M. edulis</i> the reduction of recruitment was 81% with barettin (0.1%) and 72% with 8,9-dihydrobarettin (0.1%) with the same SPC paint. Furthermore, 14 analogs of barettin and dipodazine were synthesised and tested for their ability to inhibit larval settlement. Two of the analogs have a barettin scaffold and twelve have a dipodazine scaffold. Six of the analogs displayed significant settlement inhibition with the most potent inhibitor being benzo[g]dipodazine (EC₅₀ value 0.034 µM). The effect of benzo[g]dipodazine was also shown to be reversible. Finally, an investigation of the mode of action was performed on 5-HT receptors. Barettin demonstrated a specific affinity to 5-HT_2A, 5-HT_2C and 5-HT₄, while 8,9-dihydrobarettin interacted only with 5-HT_2C of the receptor subtypes tested (5-HT₁-5-HT₇).</p>

Summary: A process is under investigation for the manufacture of dicalcium phosphate by the hydrolosis of concentrated superphosphate containing recycled monocalcium phosphate. The hydrolysis also results in the formation of an aqueous solution of monocalcium phosphate and free phosphoric acid. The phases are separated, followed by washing and drying of the solid dicalcium phosphate. The wash water is used in the hydrolyzer. The solution is returned to the superphosphate production step, where phosphate rock and additional phosphoric acid are added, and where water is evaporated to form the solid superphosphate. Pilot plant results have indicated that filtration rates vary widely under almost identical mixing conditions, presumably due to variations in particle size ranges. It was thought worthwhile, therefore, to study the effects of different mixing variables on the relative particle sizes as indicated by the settling rates of the mixture.

The marine sponge Geodia barretti produces a range of secondary metabolites. Two of these compounds were isolated and elucidated guided by their ability to inhibit settlement of cypris larvae of the barnacle Balanus improvisus. The compounds barettin (cyclo-[(6-bromo-8-en-tryptophan)-arginine]) as E/Z mixture and 8,9-dihydrobarettin (cyclo-[6-bromo-tryptophan)-arginine]) were determined by using mass spectrometry, nuclear magnetic resonance and quantitative amino acid analysis.The bioactivity of these brominated dipeptides is in the range of antifouling substances used today: EC50 values of 0.9 µM (barettin) and 7.9 µM (8,9-dihydrobarettin). The compounds were successfully synthesised and then tested in a field experiment to evaluate their antifouling properties. The compounds were incorporated in four different commerical, non-toxic marine coatings. The concentrations of the compounds were 0.1 and 0.01% (w/w) and coated panels were exposed to field conditions for eight weeks. The experiment evaluated the effect of barettin and 8,9-dihydrobarettin on recruitment of the barnacle B. improvisus and the blue mussel Mytilus edulis (major Swedish foulers). The most efficient paint was a SPC polymer, for which the reduction of recruitment of B. improvisus was 89% with barettin (0.1%) and 61% with 8,9-dihydrobarettin (0.1%). For M. edulis the reduction of recruitment was 81% with barettin (0.1%) and 72% with 8,9-dihydrobarettin (0.1%) with the same SPC paint. Furthermore, 14 analogs of barettin and dipodazine were synthesised and tested for their ability to inhibit larval settlement. Two of the analogs have a barettin scaffold and twelve have a dipodazine scaffold. Six of the analogs displayed significant settlement inhibition with the most potent inhibitor being benzo[g]dipodazine (EC50 value 0.034 µM). The effect of benzo[g]dipodazine was also shown to be reversible. Finally, an investigation of the mode of action was performed on 5-HT receptors. Barettin demonstrated a specific affinity to 5-HT2A, 5-HT2C and 5-HT4, while 8,9-dihydrobarettin interacted only with 5-HT2C of the receptor subtypes tested (5-HT1-5-HT7).

The effectiveness of partial ozonation of return activated sludge for enhancing denitrification and waste sludge minimization were examined. A pair of nitrifying sequencing batch reactors was operated in either aerobic or alternating anoxic/aerobic conditions, with one control and one ozonated reactor in each set. The amount of solids decreased with the ozone dose. Biomass in the anoxic/aerobic reactor was easier to destroy than in the aerobic one, generating approximately twice as much soluble chemical oxygen demand (COD) by cell lysis. Increased COD favoured production of extracellular polymers in ozonated reactors, enhancing flocculation and improving settling. Floc stability was also strengthened in prolonged operation in alternating treatment, resulting in declined solids destruction. Dewaterability was better in alternating reactors than in aerobic ones indicating that incorporation of an anoxic zone for biological nutrient removal leads to improvement in sludge dewatering. The negative impact of ozonation on dewaterability was minimal in terms of the long-term operation. Ozone successively destroyed indicator estrogenic compounds, contributing to total estrogen removal from wastewater. Denitrification rate improved up to 60% due to additional carbon released by ozonation. Nitrification rates deteriorated much more in the aerobic than in the alternating reactor, possibly as a result of competition created by growth of heterotrophs receiving the additional COD. Overall, ozonation provided the expected benefits and had less negative impacts on processes in the alternating treatment, although after prolonged operation, benefits could become less significant. The alternating anoxic/aerobic reactor achieved twice the nitrification rates of its aerobic counterpart. Higher removal rates of estrogens were associated with higher nitrification rates, supporting the contention that the nitrifying biomass was responsible for their removal. The alternating treatment offered the better estrogen biodegradation. Microbial populations in both reactors were examined with fluorescent in situ hybridization. Dominance of rapid nitrifiers like Nitrosomonas and Nitrobacter (79.5%) in the alternating reactor, compared to a dominance of slower nitrifiers like Nitrosospira and Nitrospira (78.2%) in the aerobic reactor were found. The findings are important to design engineers, as reactors are typically designed based on nitrifiers’ growth rate determined in strictly aerobic conditions. / October 2008

Low-sensitivity switched capacitor filters imitating 'R','L' and 'C' can be built by means of capacitances, ordinary switches and voltage inverter switches (VIS). These structures carry the inherent bilinear transformation of their doubly resistively terminated ladder reference filters. This one to one correspondence between the 's-domain' and the 'z-domain' results in the Nyquist criterion being the only limitation on the sampling frequency. This eliminates the necessity for oversampling and VIS filters can be designed for high operating rates. Filters based on VIS principle were analysed in previous literatures in the 'phi-domain'. In this thesis work, a successful attempt has been made to formulate an analysis procedure for discrete-time filters based on VIS principle in the 'z-domain'. Significant details have been brought out in comparison with the respective reference filter. A fifth-order lowpass filter has been designed and implemented to exhibit the closeness to the bilinearly transformed continuous-time reference filter. Settling time analysis has been done to justify the need for filters using VIS principle as compared to the filters employing integrator based switched capacitor filter. It is shown that VIS filter can be made to settle within half the period required for a conventional integrator based switched capacitor filter.

No description available.

Microalgae produce large quantities of lipids that can be used for biofuel feedstock. The goal of this project was to determine the effect of several engineering and management parameters on the productivity of microalgae cultivated in large, outdoor facilities. The specific objectives were focused on the effects of inoculation ratios; the effects of light, temperature, and culture depth on growth; and the minimum circulation velocity necessary to maintain growth and minimize settling in open ponds. Microalgae must first be cultured in smaller quantities before the raceway is inoculated for optimized growth. Concentration ratios are defined as the ratio of the volume of microalgae inoculum to the volume of new growth media. The microalgae species used was Nannochloris oculata (UTEX #LB 1998). Inoculation ratios studied varied from 1:1 to 1:32 and were grown in 500 mL Erlenmeyer flasks. The study found that 1:16 and 1:32 were too dilute, while the 1:8 concentration had the largest growth rate. Determination of the effects of temperature, light intensity, and cultivation depth is critical to maintaining healthy cultures. Excess light intensity can result in photoinhibition and temperatures above the maximum growing tolerance can have detrimental effects. These factors can affect growth and evidence suggests an interaction that exacerbates these effects. In an outdoor culture there are few practical control variables other than pond depth. As cultivation depth increases, the algae undergo "selfshading" and the increased cultivation volume hinders temperature changes. Scaled raceway ponds were maintained at 10.16 cm (4 inch) and 13.97 cm (5.5 inch) depths. The species used was Nannochloris oculata and it was found to grow best at 785 micromol m⁻² s⁻¹m^-2 s^-1, 20°C, and 10.16 cm. Diatoms are attractive because of high growth rates, faster lipid production, and greater cell density. The latter promotes rapid settling once mixing has stopped. Because of the silica cell wall composition, diatoms are believed to be more susceptible to shear forces which can result in lysis. Determining the natural settling rate to the minimum channel velocity relationship in cultivation ponds was the objective. No flocculants/coagulants were added which created a case of "natural" settling. Four pennate Nitzschia sp. and one centric diatom were tested in a jar tester. There was no significant difference in settling times between the species. The mean settling time was 4.55 cm min⁻¹ and the minimum channel velocity was determined to be 10.12 cm min⁻¹.

This thesis is part of a project funded by the Minerals Management Service (MMS) (now Bureau of Ocean Energy Management, Regulation and Enforcement (BOEMRE)) to study the use of epoxy to plug hurricane damaged wells. Some of the wells destroyed by hurricanes are damaged to an extent that vertical intervention from the original wellhead is not possible. These wells have to be plugged to prevent future flows through the well to protect the environment. Cement is usually the preferred plugging material because it is very cheap compared to other materials like epoxy. However, cement can easily get contaminated by sea water or brines present in wells as completion fluids. Therefore, to be able to use cement it has to be placed at the bottom of the well by drilling an offset well all the way to the bottom of the original well. Epoxy, on the other hand, being much more chemically stable can be placed at the very top of the well and let to settle by gravity without fearing contamination. Therefore, in wells described above, epoxy can be much more economical than cement. Placing epoxy at the top of a well and letting it settle by gravity can also be more economical than using cement in other situations such as in a leaking annulus of a well where circulation in that annulus is not possible, or if a well that has been previously plugged starts leaking again after the rig has been removed. Placing epoxy in the manner described can be achieved without using a rig and therefore, would be much more economical than cement. One of the most important factors in this process is to be able to predict the settling velocity of the epoxy to be able to determine the required setting time of the epoxy so that the epoxy does not set prematurely. In addition, it is important to evaluate whether the epoxy can successfully settle to the bottom and how much of it will adhere to the pipe walls while freefalling. This thesis aims to design, build and run an experimental setup that would help study the settling velocity of epoxy. Some experiments were conducted to assess the effect of different parameters that might affect the settling velocity of the epoxy such as the epoxy’s density, the annulus size and the inclination angle. The results show that the settling velocity was proportional to the epoxy’s density. Also the settling speed was almost double in experiments done at an angle compared to experiments done at vertical position. The annulus size did not have any clear effect on the settling speed. The adhesion to the pipe walls was found to be proportional to the epoxy’s viscosity and angle of inclination and was inversely proportional to the annulus size.

Abstract In order to understand the source, transport pathway and sink of settling particulates off northeast Taiwan, time-series sediment traps (PPS-3/3) were deployed on the north slope of Ilan ridge (T18) and in the Okinawa trough (T15 and T16) to collect settling particulates. The trapped particulate samples were determined for apparent mass flux (T18), particle size distribution, and contents of lithogenic portion, metals (Al, Mg, Ca, Fe, Mn, Cu), opal, OC (organic carbon) and IC (inorganic carbon). The results show that mass flux in winter is higher than in summer except for typhoon or rainstorm in summer which may cause high particulate flux. At mooring T11 and T17, only 2 cups had collected particulates but with rapid decrease, and the remaining cups were empty. It is not clear whether Kuroshio plays a role and further investigation is needed. The trapped particulates were mainly clay and silt in the north slope of Ilan ridge and south Okinawa trough, and were sand and silt in the Mien-Hwa canyon. The portion of coarse silt and larger particles (>31 mm) decreases with an increase of distance from the land (from T11 to T18). The grain size distribution of particulate at T18 is similar to that at T15 and T16, but the mass flux in the north slope of Ilan ridge is an order of magnitude higher than in the south Okinawa trough. The size distribution pattern below 600m water depth is very similar at both T15 and T16, but the coarse fraction (> 31 mm) is more at the upper than lower traps, presumably due to lateral transport. The Mn content of the trapped particulates in the south Okinawa trough is twice as hign as that in the north slope of Ilan ridge. High Mn/Al ratio in the trough suggests that Mn is supplied by hydrothermal activities. Lithogenic portions occupy about 84~88.5% at T18, T16 and T15. Relative to other marginal seas biogenic contributions are clearly lower.