Digitized by Kansas Correctional Industries

Thesis (B.S.)--University of California, Berkeley.

No description available.

OBJECTIVES: The aims of this study are to determine the shade correlation between try-in pastes with their corresponding resin cements. Also, to investigate the effect of resin cement shades and various ceramic thicknesses, shades, and translucency in the final color outcome over tooth-shaded backgrounds. MATERIALS AND METHOD: Lithium Disilicate CAD/CAM blocks (IPS e.max CAD) were prepared, in high and low translucency, in two different shades (A1 and A3), and in 2 different thicknesses (0.53 ± 0.02 mm and 0.83 ± 0.02 mm). Four different tooth-shaded backgrounds (ND2, ND5, ND8, and ND9) were prepared from acrylic resin in a standard thickness of 6.610 mm to achieve complete opacity. RelyX veneer cement and its corresponding try-in paste in three different shades, Transparent (TR), White Opaque (WO), and Bleached Opaque (BO), in a thickness of (80 ± 5 μm) were used. For each combination, the color was measured with a spectrophotometer to calculate the color difference (ΔΕ value) in reference to ceramic veneer, and the differences of ΔΕ among the specimens were compared statistically using JMP Pro 13. Analysis was performed for 3 aims, (1) to compare the ability of ceramic to mask the aspect of the abutment in relation to its thickness (0.5 and 0.8) mm, transparency (HT and LT) and shade (A1 and A3), (2) effect of a change in cement color (TR, WO, and BO) on the final color of the ceramic; and (3) to determine the correlation between try-in pastes with their corresponding resin cements. RESULT: A significant difference was found with a p-value of <.0001 for the following factors: Stump Shade, ceramic thickness, cured cement, ceramic shade, cement type and for the interactions of cured cement with cement type, and stump shade with ceramic transparency. Also, a significant difference was found with ceramic transparency with a p-value 0.0476. While cured cement and its corresponding try-in paste showed a significant difference in color masking (p <.0001) shade White Opaque cement and shade White Opaque try-in paste exhibited insignificant color change outcome with a p-value of 0.8051. CONCLUSION: RelyX veneer cements shades (Translucent and Bleached Opaque) have lower masking ability than White Opaque cement. RelyX veneer Try in paste is much less effective in masking than its corresponding resin cement. The only correlation between RelyX veneer cements with their corresponding try-in pastes among the shades tested (White Opaque, Translucent and Bleached Opaque) is with shade White Opaque. This study demonstrated that underlying tooth abutment color, cement color, and ceramic thickness, shade and translucency all influence the resulting optical color of CAD/CAM glass-ceramic lithium disilicate-reinforced restorations. / 2020-10-24T00:00:00Z

No description available.

The resin composite (RC) layering technique attempts to replicate the natural structure of teeth by using an opaque dark layer (replicating dentin) covered with a translucent layer (replicating enamel). Previous studies have confirmed that the shade of dentin and the thickness and translucency of the enamel layer are essential factors in the color of natural teeth. However, these findings have never been validated with the RC layering technique. RC layering technique provides superior esthetic results; however, the chemical composition and optical properties of RC are different than natural dentition. Hence, the color interaction between the enamel and dentin RC layers makes the color of the final restoration unpredictable. The objective of this dissertation was to determine the color interaction between the enamel and dentin layers using a unique and novel sample design: a double-layered RC with variant enamel thicknesses (0.5, 0.7, 1.0 mm) and variant dentin shades (lighter and darker shades). The study methods tested the interaction between certain shades as per manufacturers’ instructions to reproduce certain shades. Two different RC systems that are fundamentally different with regards to their shading system were tested in this study. A potential link between the color of the double layered RC samples to the VITA 3D master shade guide which has been overlooked by clinicians and researchers, have been investigated in this study. Research aims included validating the sample design we have incorporated into our studies. Furthermore, other aims investigated the double-layering techniques in comparison to their corresponding shades from the VITA classical and VITA 3D Master shade guides. The outcomes of this study are clinical recommendations on the optimal combination of dentin shades and enamel layer thicknesses to use in order to best match the color of natural teeth.

There are many benefits to living in a walkable city, and just as many barriers to making a city truly pedestrian-friendly. In hot climates such as Austin, Texas, high temperatures are a principal challenge to walkability and also a safety concern when temperatures rise above 100°F. Although city planning came about largely to protect the streetscape from unbridled, sunlight- blocking development, too much sunshine can be just harmful and therefore shade provision merits the attention of urban planners. One useful tool for shade analysis and planning for shade provision is Geographic Information Systems (GIS). However, GIS has typically been limited to tree cover analysis, leaving out the significant contributions of the built environment for shade provision. This report examines recent applications of GIS for walkability analysis and planning efforts to enhance pedestrian comfort in Austin, and then presents an analysis of shade provision in East Sixth Street, Austin, Texas, focusing on 3D modeling of the built environment. It is the hope that this study will inform future shade research and analysis for improved walkability, particularly in cities located in hot climates. / text

Leaf senescence is the final stage of leaf development, during which the leaf relocates most of itsvaluable nutrients to developing or storing parts of the plant. As this process progresses, leaves losetheir green color and their capacity to perform photosynthesis. Shade and darkness are well-knownas factors inducing leaf senescence and it has been proposed that senescence can be initiated byreductions in photosynthesis, photomorphogenesis and transpiration. However, despite the fact thatthe signaling mechanisms regulating each of these processes have been extensively described,particularly in seedlings, their contribution to the initiation of senescence in mature leaves stillremains unclear. Furthermore, the use of different experimental systems to study shade-inducedleaf senescence has yielded several divergent results, which altogether complicate the overallunderstanding of leaf senescence. To address this, darkened plants and individually darkened leaves, which show different rates of leafsenescence, were studied. Comparing the transcriptome and metabolome of these two darktreatmentsrevealed that they differed distinctly with regard to their metabolic strategies. Wholedarkened plants were severely carbohydrate-starved, accumulated amino acids and slowed downtheir metabolism. In contrast, individually darkened leaves showed continued active metabolismcoupled to senescence-associated degradation and relocation of amino acids. This knowledge was used to set up a new system to study how shade affects leaf senescence in themodel plant Arabidopsis thaliana. Use of this system revealed that different senescence-associatedhallmarks appeared in response to different intensities of shade. Some of these hallmarks werefurther shown to be part of both leaf senescence and photosynthetic acclimation to low light. Finally, using this system on phytochrome mutants revealed that loss of phytochrome A increasedthe loss of chlorophyll under shade, without increasing the expression of senescence-associatedgenes. Together, these findings suggest that shade-induced leaf senescence, which is generally perceived asa single process, is actually an intricate network of different processes that work together tomaintain an optimal distribution of nutrients within the plant.

No description available.

While there is growing evidence that shade/flood tolerance tradeoffs may be important in distributions of bottomland hardwood trees and indications that they should apply to herbs, no studies have definitively explored this possibility. Four years of field data following historic flooding were supplemented with a greenhouse experiment designed to identify interactions congruent with tradeoffs. Fifteen bottomland species were grown in two levels of water availability and three levels of shade over 10 weeks. Results indicate responses of Fimbristylis vahlii and Ammannia robusta are consistent with tradeoffs. Modification of classical allometric responses to shade by substrate saturation indicates a potential mechanism for the tradeoff in A. robusta. Responses indicating potential for increased susceptibility to physical flooding disturbance are also discussed.