No description available.

The object of this thesis is to discuss an experimental composite conservation process and its significance for the future of artifact conservation. Composite artifacts are artifacts comprised of multiple materials such as wood, iron, and brass. The experiment was designed around five Civil War Enfield rifles from the wreck of the Civil War blockade runner Modern Greece. The main conservation difficulty for both metal and wood from a saltwater site is the presence of chlorides. If not removed, the chlorides will cause the metals to further corrode. If the chlorides are left within the wood, once the wood dries the chlorides will crystallize and burst remaining cellular structure. The second major problem for wood is the cellular structure itself. Degraded waterlogged wood loses most of its cellular structure while submerged and this must be reinforced prior to drying or partial to total collapse of the wood will occur. Composite artifacts pose one more serious problem, their composite nature. In most instances treatments for one material type are damaging to the other materials present. Disassembly of an artifact often has detrimental effects on the whole artifact whether through initial damage or the inability to reassemble the artifact after stabilization. In 1979, four Enfield rifles from Modern Greece were compositely conserved using either tetraethyl orthosilicate, sucrose, or isopropyl rosin. All three treatments focused on the conservation of the wood, resulting in the current poor condition of the iron elements. The research of this thesis uses the combined treatments of silicone oil (to treat the wood) and electrolytic reduction [ER] (to stabilize the metals), with minimal disassembly. It was discovered that prolonged exposure of the wood elements during ER had deleterious effects, post the silicone oil treatment. This prompted a re-evaluation of the research strategy. It was determined to do a re-treatment of the wood components of four of the rifles with silicone oil after the ER process. It was apparent during the ER process that iron components had loosened and could be removed allowing the wood to be extracted from the ER process earlier than the iron. Even though the experiment did not go as planned and the initial results were undesirable, valuable information was ascertained for treatment strategies and positive results are expected for the final four rifles. The retreatment of the wood with silicone oil should allow the wood to retain its shape, making reassembly possible.

The main objective of this investigation is to determine the effect of different physical and chemical parameters on the performance of biofilters, treating hydrophobic organic compounds. pinene was used as a model substance. Alpha-pinene is commonly found in wood, and therefore found at wood storage facilities and wood processing industries [1]. In this experiment two biofilter which were in equal size, were used. Both of them were filled with perlite for treating the alpha pinene contaminated air. One of the columns contained perlite partially coated with silicone oil to make the surface of perlite more hydrophobic. The filters were run at 5, 2.5 and 1.5 l min-1 air flow rate. The results showed that the silicone oil amended filter performed better at 2.5 l/min with a maximum removal rate of 20 g / (m3 h) in comparison with 15 g/ (m3 h) for the filter without oil. The efficiency was approximately the same for both filters at 1.5 and 5 l/min (40 compare to 35 g/m3 bed h). The flow rate was then set to 2.5 l/min once more. The results showed that the removal rate had increased to approximately 35 g/ (m3 h) and that the efficiency of both filters was approximately the same. The difference in results between the initial run and the later at 2.5 l/min is probably depending on that the microorganisms had become adapted to the α-pinene and that the microorganism communities developed differently in the two filters. / Syftet med denna studie var att undersöka om en ökning av biofilterytans hydrofobicitet kan förbättra effektiviteten med avseende på nedbrytning av en hydrofob förening såsom -pinen. En hydrofob yta skulle kunna medföra en ökning i adsorption av hydrofoba föroreningar vilket i sin tur skulle kunna öka tillgängligheten hos föroreningarna för mikroorganismerna. Försöken utfördes med hjälp av två biofilter fyllda med perlit. Ett filter fylldes med obehandlad perlit medan det andra filtret fylldes med perlit som blandats med silikonlja. Båda filtren ympades med mikroorganismer som växt på träflis. Dessa mikroorganismer är anpassade för att bryta ner -pinen då denna förening friges i stora mängder från trä. Resultaten visar att filtret innehållande perlit täckt med silikonolja var mer effektivt med avseende på nedbrytning avpinen under den första tiden av studien (de första 30 dagarna). Skillnaden i effektivitet mellan filtren minskade dock betydligt med tiden så att skillnaden inte var signifikant under resten av studien. Prover från vätskefasen från de båda filtren undersöktes i mikroskop. Dessa studier visade att olika mikroorganismer dominerade i de båda filtren. Filtret innehållande oljetäckt perlit dominerades av stavformiga bakterier medan filtret innehållande obehandlad perlit dominerades av kocker. Båda filtren innehöll en blandkultur av kocker och stavar. Dessutom växte svamp i båda filtren. Dessa resultat visar att en förändring av ytans hydrofobicitet inte bara kan leda till en ökad adsorption av förorening utan den kan också leda till att andra mikroorganismer får en dominerande roll i filtret. Den maximala nedbrytningshastigheten låg mellan 35 och 40 g pinen/(m3h) under hela studien förutom de 30 första dagarna oberoende av luftflödeshastighet (1,5 , 2,5 respektive 5 l/min). Den maximala nedbrytningshastigheten under inledningen av försöket var 15 g/(m3 h) för filtret innehållande obehandlad perlit och 20 g/(m3h) för filtret innehållande oljetäckt perlit. Luftflödet var 2,5 l/min under den inledande perioden. Ökningen i nedbrytningshastighet med tiden indikerar att mikroorganismerna anpassade sig till miljön. Den relativt konstanta nedbrytningshastigheten under resten av studien indikerar att det var de biokemiska reaktionerna som var hastighetsbegränsande och att masstransporten inte hade någon dominerande roll med avseende på att begränsa hastigheten.

The object of this thesis is to discuss an experimental composite conservation process and its significance for the future of artifact conservation. Composite artifacts are artifacts comprised of multiple materials such as wood, iron, and brass. The experiment was designed around five Civil War Enfield rifles from the wreck of the Civil War blockade runner Modern Greece. The main conservation difficulty for both metal and wood from a saltwater site is the presence of chlorides. If not removed, the chlorides will cause the metals to further corrode. If the chlorides are left within the wood, once the wood dries the chlorides will crystallize and burst remaining cellular structure. The second major problem for wood is the cellular structure itself. Degraded waterlogged wood loses most of its cellular structure while submerged and this must be reinforced prior to drying or partial to total collapse of the wood will occur. Composite artifacts pose one more serious problem, their composite nature. In most instances treatments for one material type are damaging to the other materials present. Disassembly of an artifact often has detrimental effects on the whole artifact whether through initial damage or the inability to reassemble the artifact after stabilization. In 1979, four Enfield rifles from Modern Greece were compositely conserved using either tetraethyl orthosilicate, sucrose, or isopropyl rosin. All three treatments focused on the conservation of the wood, resulting in the current poor condition of the iron elements. The research of this thesis uses the combined treatments of silicone oil (to treat the wood) and electrolytic reduction [ER] (to stabilize the metals), with minimal disassembly. It was discovered that prolonged exposure of the wood elements during ER had deleterious effects, post the silicone oil treatment. This prompted a re-evaluation of the research strategy. It was determined to do a re-treatment of the wood components of four of the rifles with silicone oil after the ER process. It was apparent during the ER process that iron components had loosened and could be removed allowing the wood to be extracted from the ER process earlier than the iron. Even though the experiment did not go as planned and the initial results were undesirable, valuable information was ascertained for treatment strategies and positive results are expected for the final four rifles. The retreatment of the wood with silicone oil should allow the wood to retain its shape, making reassembly possible.

No description available.

<p>The main objective of this investigation is to determine the effect of different physical and chemical parameters on the performance of biofilters, treating hydrophobic organic compounds. pinene was used as a model substance. Alpha-pinene is commonly found in wood, and therefore found at wood storage facilities and wood processing industries [1].</p><p>In this experiment two biofilter which were in equal size, were used. Both of them were filled with perlite for treating the alpha pinene contaminated air. One of the columns contained perlite partially coated with silicone oil to make the surface of perlite more hydrophobic. The filters were run at 5, 2.5 and 1.5 l min-1 air flow rate. The results showed that the silicone oil amended filter performed better at 2.5 l/min with a maximum removal rate of 20 g / (m3 h) in comparison with 15 g/ (m3 h) for the filter without oil. The efficiency was approximately the same for both filters at 1.5 and 5 l/min (40 compare to 35 g/m3 bed h). The flow rate was then set to 2.5 l/min once more. The results showed that the removal rate had increased to approximately 35 g/ (m3 h) and that the efficiency of both filters was approximately the same. The difference in results between the initial run and the later at 2.5 l/min is probably depending on that the microorganisms had become adapted to the α-pinene and that the microorganism communities developed differently in the two filters.</p> / <p>Syftet med denna studie var att undersöka om en ökning av biofilterytans hydrofobicitet kan förbättra effektiviteten med avseende på nedbrytning av en hydrofob förening såsom -pinen. En hydrofob yta skulle kunna medföra en ökning i adsorption av hydrofoba föroreningar vilket i sin tur skulle kunna öka tillgängligheten hos föroreningarna för mikroorganismerna. Försöken utfördes med hjälp av två biofilter fyllda med perlit. Ett filter fylldes med obehandlad perlit medan det andra filtret fylldes med perlit som blandats med silikonlja. Båda filtren ympades med mikroorganismer som växt på träflis. Dessa mikroorganismer är anpassade för att bryta ner -pinen då denna förening friges i stora mängder från trä. Resultaten visar att filtret innehållande perlit täckt med silikonolja var mer effektivt med avseende på nedbrytning avpinen under den första tiden av studien (de första 30 dagarna). Skillnaden i effektivitet mellan filtren minskade dock betydligt med tiden så att skillnaden inte var signifikant under resten av studien. Prover från vätskefasen från de båda filtren undersöktes i mikroskop. Dessa studier visade att olika mikroorganismer dominerade i de båda filtren. Filtret innehållande oljetäckt perlit dominerades av stavformiga bakterier medan filtret innehållande obehandlad perlit dominerades av kocker. Båda filtren innehöll en blandkultur av kocker och stavar. Dessutom växte svamp i båda filtren. Dessa resultat visar att en förändring av ytans hydrofobicitet inte bara kan leda till en ökad adsorption av förorening utan den kan också leda till att andra mikroorganismer får en dominerande roll i filtret. Den maximala nedbrytningshastigheten låg mellan 35 och 40 g pinen/(m3h) under hela studien förutom de 30 första dagarna oberoende av luftflödeshastighet (1,5 , 2,5 respektive 5 l/min). Den maximala nedbrytningshastigheten under inledningen av försöket var 15 g/(m3 h) för filtret innehållande obehandlad perlit och 20 g/(m3h) för filtret innehållande oljetäckt perlit. Luftflödet var 2,5 l/min under den inledande perioden. Ökningen i nedbrytningshastighet med tiden indikerar att mikroorganismerna anpassade sig till miljön. Den relativt konstanta nedbrytningshastigheten under resten av studien indikerar att det var de biokemiska reaktionerna som var hastighetsbegränsande och att masstransporten inte hade någon dominerande roll med avseende på att begränsa hastigheten.</p>

Postoperative corneal complications from pars plana vitrectomy surgery on the retina have been studied extensively in the literature. Researchers are aware of possible issues with oil tamponades, laser techniques, and other methods used. There could be clear markers to focus on a pattern of retina diagnoses of the patients that seem more prone to these problems in the front of the eye. Studies have noted refractive issues and increased cataract or posterior capsule opacification (PCO) progression but it is inconclusive in many studies on a corneal safety standpoint. Furthermore, a 23 or 27gauge pars plana vitrectomy has varying protocols depending on the diagnosis of the retina patient including endolaser, tamponade exchange, or even endoscopic cyclophotocoagulation. This study was conducted to research data looking at varying combinations of surgical type, diagnosis, and other patient characteristics to gain statistical evidence or relative frequency to better understand what type of retinal demographics cause corneal complications. The list of corneal complications in this study include: visual distortion involving anisometropia or photophobia, increased intraocular pressure including Uveitis-Glaucoma Hyphema syndrome, allergic conjunctivitis, a lens subluxation, herpes virus (zoster or simplex), a corneal scar or lesion, neurotrophic cornea, bullous keratopathy and corneal neovascularization. This was a retrospective case study evaulating 57 patients and 58 eyes that underwent a retinal surgery, with corneal complications at Beth Israel Deaconess Medical Center between October 2013 to December 2016. Number of patients, systemic demographics including frequency of hypertension and diabetes, and frequency of retina surgery per eye was analyzed. Moreover, we looked at different retina diagnoses to view which groups have a higher occurrence of complications after surgery. We used silicone oil as a way to divide the corneal complication patients to determine if the use of oil had an effect on a higher rate of issues after surgery. Eyes were divided into treatment with silicone oil group (n=23) and a non-silicone oil group (n=34), and we found that the silicone group had a significantly higher frequency of retinal surgeries (p<0.001). Moreover, there was no significant evidence between certain systemic factors (p<0.05), that allowed us to include the silicone oil and non-silicone oil patients as a unified group. When looking at our retina diagnoses we saw some groups had a higher percentage of complications when we took total number of problematic postoperative outcomes and divided that by total number of surgeries. Over one quarter of the surgeries per category leading to corneal complications occurred in the categories of subluxed lens, endophthalmitis, trauma, and uveitis-glaucoma hyphema Syndrome or neovascular glaucoma. Vitreomacular traction similarly had a high percentage of patients with corneal complications. Retinal detachment and epiretinal membrane were largest quantities of a specific retinal problem with low percentages of fewer than 15% with complications postoperatively. The study found that in our patient demographic silicone oil did not seem to be a factor in causing more corneal complications but it did cause more retinal surgeries. Moreover, certain retina diagnoses seem more prone to cause challenging outcomes, which leaves room for further studies distinguishing certain factors that could cause such specific issues.

Ce mémoire s'inscrit dans la construction d'une méthodologie d'analyse de défaillance pour l'évaluation de la fiabilité de diodes électroluminescentes, par une approche basée sur l'analyse physique de dégradation et l'extraction de signatures électriques de défaillance et optiques pour localiser les zones dégradées. L'ajout d'analyses physico-chimiques réduit le nombre de composants et peut confirmer les mécanismes de dégradation induits par les vieillissements en stockage actif. Un projet, en collaboration avec le CNES, a permis la mise en évidence des zones sensibles de DELs à MPQ InGaN/GaN à faible puissance (30mW) soumises à un vieillissement en conditions opérationnelles (1500h/85°C/Inominal). L'analyse de défaillance de ces DELs a permis d'expliquer une perte de 65% de puissance optique par la modification de la structure moléculaire de l'huile silicone activée photothermiquement induisant une perte de fluorescence de 69% et une très forte diminution de l'absorption de la lumière de la DEL (90%). Nous avons également démontré (projet CEA-LETI - éclairage public) que le même mécanisme est présent dans le mélange gel silicone/phosphore YAG:Ce de DELs blanches à MPQ InGaN/GaN soumises à un vieillissement similaire (85°C/550mA/500h). A 450nm, le rendement de fluorescence a augmenté de 1,2% malgré des pertes en absorption (> 94%) et en réémission de fluorescence (> 85%). La modification de la structure moléculaire du gel a induit une perte de puissance optique des DELs de 45% et une dérive de la couleur blanche vers le jaune (≈ 3,6%). Cette dérive est due à un décalage spectral de la fluorescence de l'UV (5nm) vers le bleu entraînant un décalage vers le rouge (2nm) de la lumière de la DEL.

Background: High-density silicone oils are newly developed long-term tamponade agents for the treatment of complicated retinal detachment in the inferior retina. Previous studies describe satisfying anatomical and functional results. In this study we examined the largest cohort so far for a 9-month follow-up and performed a comparison to conventional silicone oil. Methods: Our study documents results and adverse effects after vitreoretinal surgery and endotamponade with Densiron® 68 in 99 cases of complicated retinal detachment. A 9-month follow-up was performed. Data of 21 patients with intraocular conventional silicone oil tamponade in complicated retinal detachment were retrospectively analyzed and served as control. Results: Anatomical success was achieved in 78 of 89 eyes (87.6%) with completed follow-up; visual acuity did not change significantly (from mean preoperative logMAR 1.88 to postoperative logMAR 1.96 (p = 0.9). Compared to control a higher anatomical success but a similar number of adverse effects were observed with heavy silicone oil in vitreous. Nevertheless, patients who received Densiron 68 twice due to redetachment showed a significantly higher rate of intraocular inflammation with the tamponade agent in situ. Conclusion: Our results support the hypothesis of Densiron 68 as potent tamponade agent for complicated retinal detachment in the inferior retinal segments especially in eyes where a previous operation failed. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

Ce mémoire s'inscrit dans la construction d'une méthodologie d'analyse de défaillance pour l'évaluation de la fiabilité de diodes électroluminescentes, par une approche basée sur l'analyse physique de dégradation et l'extraction de signatures de défaillance électriques et optiques pour localiser les zones dégradées. L'ajout d'analyses physico-chimiques réduit le nombre de composants et peut confirmer les mécanismes de dégradation induits par les vieillissements en stockage actif. Un projet, en collaboration avec le CNES, a permis la mise en évidence des zones sensibles de DELs à MPQ InGaN/GaN à faible puissance (30mW) soumises à un vieillissement en conditions opérationnelles (1500h/85°C/Inominal). L'analyse de défaillance de ces DELs a permis d'expliquer une perte de 65% de puissance optique par la polymérisation de l'huile silicone activée photothermiquement induisant une perte de fluorescence de 69% et une très forte diminution de l'absorption de la lumière de la DEL (90%). Nous avons également démontré (projet CEA-LETI  éclairage public) que le même mécanisme est présent dans le mélange gel silicone/phosphore YAG:Ce de DELs blanches à MPQ InGaN/GaN soumises à un vieillissement similaire (85°C/550mA/500h). A 450nm, le rendement de fluorescence a augmenté de 1,2% malgré des pertes en absorption (> 94%) et en réémission de fluorescence (> 85%). La polymérisation de l'huile silicone a induit une perte de puissance optique des DELs de 45% et une dérive de la couleur blanche vers le jaune (≈ 3,6%). Cette dérive est due à un décalage spectral de la fluorescence de l'UV (5nm) vers le bleu entraînant un décalage vers le rouge (2nm) de la lumière de la DEL. / GaN-based LEDs are currently used in a wide range of applications as solid-state lighting, backlighting or full-color displays. Up to date, polymer-based packaging degradation mechanisms are not fully understood. The purpose of this thesis is to work out a methodology of failure analysis contributing towards reliability estimation of GaN-based LEDs under active storage ageing tests. The methodology consists in extracting electro-optical failure signatures to locate degraded zones. A second step is based on physico-chemical analyses used to both confirm failure mechanisms and reduce the number of components to study. Environmental ageing tests (1500h/85°C/Inominal) have been performed on low power InGaN/GaN MQW LEDs (30mW) through a project in collaboration with the French Space Agency (CNES). A 65% loss of optical power has been reported after ageing. Through the methodology, we have found out that optical loss is due to the silicone oil (i.e. chip coating) polymerization activated by photothermal mechanism thereby involving both a 69% fluorescence emission loss and a strong decrease of LED light absorption (90%). A similar failure mechanism has been reported on YAG:Ce/silicone oil mixture located in phosphor converted high power white InGaN/GaN MQW LEDs (CEA-LETI collaboration - Solid-State Lighting project). Fluorescence efficiency has increased (1,2% at 450 nm) despite both strong absorption (94%) and fluorescence emission (85%) losses. Actually, silicone oil polymerization has induced a 45% loss of optical power and a 3,6% yellow shift of white light. Such drift has been linked to both a 5nm blue shift of UV fluorescence involving a 2nm red shift of LED light.