Yes / We combine single molecule force spectroscopy measurements with all-atom metadynamics simulations to investigate the cross-materials binding strength trends of DNA fragments adsorbed at the aqueous graphite C(0001) and Au(111) interfaces. Our simulations predict this adsorption at the level of the nucleobase, nucleoside, and nucleotide. We find that despite challenges in making clear, careful connections between the experimental and simulation data, reasonable consistency between the binding trends between the two approaches and two substrates was evident. On C(0001), our simulations predict a binding trend of dG > dA ≈ dT > dC, which broadly aligns with the experimental trend. On Au(111), the simulation-based binding strength trends reveal stronger adsorption for the purines relative to the pyrimadines, with dG ≈ dA > dT ≈ dC. Moreover, our simulations provide structural insights into the origins of the similarities and differences in adsorption of the nucleic acid fragments at the two interfaces. In particular, our simulation data offer an explanation for the differences observed in the relative binding trend between adenosine and guanine on the two substrates.

<p>Just as heat, light and electricity do, mechanical forces can also stimulate reactions. Conventionally, these processes - known as mechanochemistry - were viewed as comprising only destructive events, such as bond scission and material failure. Recently, Moore and coworkers demonstrated that the incorporation of mechanophores, i.e., mechanochemically active moieties, can bring new types of chemistry. This demonstration has inspired a series of fruitful works, at both the molecular and material levels, in both theoretical and experimental aspects, for both fundamental research and applications. This dissertation evaluates mechanochemical behavior in all of these contexts. </p><p>At the level of fundamental reactivity, forbidden reactions, such as those that violate orbital symmetry effects as captured in the Woodward-Hoffman rules, remain an ongoing challenge for experimental characterization, because when the competing allowed pathway is available, the reactions are intrinsically difficult to trigger. Recent developments in covalent mechanochemistry have opened the door to activating otherwise inaccessible reactions. This dissertation describes the first real-time observation and quantified measurement of four mechanically activated forbidden reactions. The results provide the experimental benchmarks for mechanically induced forbidden reactions, including those that violate the Woodward-Hoffmann and Woodward-Hoffmann-DePuy rules, and in some cases suggest revisions to prior computational predictions. The single-molecule measurement also captured competing reactions between isomerization and bimolecular reaction, which to the best of our knowledge, is the first time that competing reactions are probed by force spectroscopy. </p><p> Most characterization for mechanochemistry has been focused on the reactivity of mechanophores, and investigations of the force coupling efficiency are much less reported. We discovered that the stereochemistry of a non-reactive alkene pendant to a reacting mechanophore has a dramatic effect on the magnitude of the force required to trigger reactivity on a given timescale (here, a 400 pN difference for reactivity on the timescale of 100 ms). The stereochemical perturbation has essentially no measurable effect on the force-free reactivity, providing an almost perfectly orthogonal handle for tuning mechanochemical reactivity independently of intrinsic reactivity. </p><p>Mechanochemical coupling is also applied here to the study of reaction dynamics. The dynamics of reactions at or in the immediate vicinity of transition states are critical to reaction rates and product distributions, but direct experimental probes of those dynamics are rare. The s-trans, s-trans 1,3-diradicaloid transition states are trapped by tension along the backbone of purely cis-substituted gem-difluorocyclopropanated polybutadiene using the extensional forces generated by pulsed sonication of dilute polymer solutions. Once released, the branching ratio between symmetry-allowed disrotatory ring closing (of which the trapped diradicaloid structure is the transition state) and symmetry-forbidden conrotatory ring closing (whose transition state is nearby) can be inferred. Net conrotatory ring closing occurred in 5.0 ± 0.5% of the released transition states, as compared to 19 out of 400 such events in molecular dynamics simulations.</p><p>On the materials level, the inevitable stress in materials during usage causes bond breakage, materials aging and failure. A strategy for solving this problem is to learn from biological materials, which are capable to remodel and become stronger in response to the otherwise destructive forces. Benzocyclobutene has been demonstrated to mechanically active to ortho-quinodimethide, an intermediate capable for [4+4] dimerization and [4+2] cycloaddition. These features make it an excellent candidate for and synthesis of mechanochemical remodeling. A polymer containing hundreds of benzocyclobutene on the backbone was synthesized. When the polymer was exposed to otherwise destructive shear forces generated by pulsed ultrasound, its molecular weight increased as oppose to other mechanophore-containing polymers. When a solution of the polymer with bismaleimide was subjected to pulsed ultrasonication, crosslink occurred and the modulus increased by two orders of magnitude.</p> / Dissertation

<p>Proteins are specialized molecules that catalyze most of the reactions that can sustain life, and they become functional by folding into a specific 3D structure. Despite their importance, the question, "how do proteins fold?" - first pondered in in the 1930's - is still listed as one of the top unanswered scientific questions as of 2005, according to the journal Science. Answering this question would provide a foundation for understanding protein function and would enable improved drug targeting, efficient biofuel production, and stronger biomaterials. Much of what we currently know about protein folding comes from studies on small, single-domain proteins, which may be quite different from the folding of large, multidomain proteins that predominate the proteomes of all organisms.</p><p>In this thesis I will discuss my work to fill this gap in understanding by studying the unfolding and refolding of large, multidomain proteins using the powerful combination of single-molecule force-spectroscopy experiments and molecular dynamic simulations.</p><p>The three model proteins studied - Luciferase, Protein S, and Streptavidin - lend insight into the inter-domain dependence for unfolding and the subdomain stabilization of binding ligands, and ultimately provide new insight into atomistic details of the intermediate states along the folding pathway.</p> / Dissertation

The chemokine, Monocyte Chemoattractant Protein (MCP-1), enhances integrin mediated monocyte adhesion to the vascular endothelium during inflammation. In this study, we demonstrate that MCP-1 promotes rapid sub-second adhesion of THP-1 cells to Vascular Cell Adhesion Molecule-1 (VCAM-1), but not to Intercellular Cell Adhesion Molecule-1 (ICAM-1). MCP-1 activates membrane tethered Very Late Antigen 4 (VLA-4, α4β1), but not necessarily cytoskeleton anchored VLA-4. Activated tethered VLA-4 bonds tremendously increased the period of time monocytes remain bound from hundreds of milliseconds to several seconds and also increased the distance over which immunologic surveillance occurs from several microns up to 20 microns along the endothelium. Lastly at the single molecule level, MCP-1 stimulated tethered VLA-4 bonds exhibit increased resistance to pulling force. In conclusion MCP-1 increased tethered VLA-4 bond resistance to force providing a mechanism for monocyte recruitment to the endothelium.

Single molecule force spectroscopy is an important technique to determine the interaction forces between biomolecules. Atomic force microscopy (AFM) is one of the tools used for this purpose. So far, AFMs usually use cantilevers as the force sensors and piezoelectrics as the actuators which may have some drawbacks in terms of speed and noise. In this research, a micromachined membrane actuator was used in two important types of experiments, namely the single molecule pulling and force-clamp based force spectroscopy. These two methods permit a more direct way of probing the forces of biomolecules, giving a detailed insight into binding potentials, and allowing the detection of discrete unbinding forces. To improve the quality of the experiments there is a need for high force resolution, high time resolution and increase in the throughput. This research focuses on using the combination of AFM and membrane based probe structures that have electrostatic actuation capability. The membrane actuators are characterized for range, dynamics, and noise to illustrate their adequacy for these experiments and to show that the complexity they introduce does not affect the noise level in the system. The control system described in this thesis utilizes the novel membrane actuator structures and integrates it into the current AFM setup. This is a very useful tool which can be implemented on any AFM without changing its mechanical architecture. To perform an experiment, all that is needed is to place the membrane actuator on the AFM stage, under the imagining head, and run the control system, which was implemented using LabVIEW. The system allows the user to maintain a precise and continuous control of the force. This was demonstrated by performing a life time experiment using biomolecules. Moreover, by slightly modifying the control scheme, the system allows us to linearize the membrane motion, which is inherently non-linear. The feasibility of using this control system for a variety of loading rate experiments are also demonstrated.

No description available.

The profound simplicity and versatility of the molecule at the heart of all earth- bound life forms, DNA, continues to inspire new frontiers of scientific inquiry. Central to many of these, including the de novo design of novel DNA nanostructures and the use of DNA to probe the principles of biological self-assembly and the operation of cellular nanomachines, is the interaction of DNA with forces, both internal and external. This thesis comprises a survey of three key ways coarse-grained simulations using the oxDNA model can contribute to efforts to characterize these interactions. First, a non-equilibrium data analysis framework based on the Jarzynski equality from statistical physics is validated for use with oxDNA through the reconstruction of free energy landscapes for canonical DNA hairpin systems. We provide a framework for assessing errors in the method and apply it to study a system for which conventional equilibrium simulations would be impractical: DNA origami 'handles' proposed for use in force spectroscopy experiments. Next, we simulate the forcible unravelling of three DNA origami structures, the largest systems yet studied with simulated force spectroscopy. We combine these results with experimental AFM data to probe the mechanical response of origami in unprecedented detail, highlighting the effect of nanostructure design on unfolding behaviour. Lastly, we examine the validity of using widely-employed polymer elastic models to predict internal entropic forces in ssDNA. We develop a framework for measuring internal forces in the oxDNA coarse-grained model and apply it to analyze the pico-Newton range forces exerted by a recently proposed DNA origami force clamp, ultimately concluding that conventional means of estimating internal ssDNA forces are often inaccurate and should be supplemented with coarse-grained simulations. In addition to providing new insights about the DNA systems we present, our results highlight the significant fruits of complementing experimental studies with coarse-grained simulations.

Hydrophobic interactions guide important molecular self-assembly processes such as protein folding. On the macroscale, hydrophobic interactions consist of the aggregation of "oil-like" objects in water by minimizing the interfacial energy. However, the hydration mechanism of small hydrophobic molecules on the nanoscale (~1 nm) differs fundamentally from its macroscopic counterpart. Theoretical studies over the last two decades have pointed to an intricate dependence of molecular hydration mechanisms on the length scale. The microscopic-to-macroscopic cross-over length scale is critically important to hydrophobic interactions in polymers, proteins and other macromolecules. Accurate experimental determination of hydration mechanisms and their interaction strengths are needed to understand protein folding. This thesis reports the development of experimental and analytical techniques that allow for direct measurements of hydrophobic interactions in a single molecule. Using single molecule force spectroscopy, the mechanical unfolding of a single hydrophobic homopolymer was identified and modeled. Two experiments examined how hydrophobicity at the molecular scale differ from the macroscopic scale. The first experiment identifies macroscopic interfacial tension as a critical parameter governing the molecular hydrophobic hydration strength. This experiment shows that the solvent conditions affect the microscopic and macroscopic hydrophobic strengths in similar ways, consistent with theoretical predictions. The second experiment probes the hydrophobic size effect by studying how the size of a non-polar side-chain affects the thermal signatures of hydration. Our experimental results reveal a cross-over length scale of approximately 1 nm that bridges the transition from entropically driven microscopic hydration mechanism to enthalpically driven macroscopic hydration mechanism. These results indicate that hydrophobic interactions at the molecular scale differ from macroscopic scale, pointing to potential ways to improve our understanding and predictions of molecular interactions. The system established in this thesis forms the foundation for further investigation of polymer hydrophobicity.

<p>This study is focused on designing and characterizing protein-based building blocks in order to construct self-assembled nano-structured biomaterials. In detail, this research aims to: (1) investigate a new class of proteins that possess nanospring behaviors at a single-molecule level, and utilize these proteins along with currently characterized elastomeric proteins as building blocks for nano-structured biomaterials; (2) develop a new method to accurately measure intermolecular interactions of self-assembling two or more arbitrary (poly)peptides, and select some of them which have appropriate tensile strength for crosslinking the proteins to construct elastomeric biomaterials; (3) construct well-defined protein building blocks which are composed of elastomeric proteins terminated with self-oligomerizing crosslinkers, and characterize self-assembled structures created by the building blocks to determine whether the elasticity of proteins at single-molecule level can be maintained.</p><p>Primary experimental methods of this research are (1) atomic force microscope (AFM) based single-molecule force spectroscopy (SMFS) that allows us to manipulate single molecules and to obtain their mechanical properties such as elasticity, unfolding and refolding properties, and force-induced conformational changes, (2) AFM imaging that permits us to identify topology of single molecules and supramolecular structures, and (3) protein engineering that allows us to genetically connect elastomeric proteins and self-assembling linkers together to construct well-defined protein building blocks.</p><p>Nanospring behavior of á-helical repeat proteins: We revealed that á-helical repeat proteins, composed of tightly packed á-helical repeats that form spiral-shaped protein structures, unfold and refold in near equilibrium, while they are stretched and relaxed during AFM based SMFS measurements. In addition to minimal energy dissipation by the equilibrium process, we also found that these proteins can yield high stretch ratios (>10 times) due to their packed initial forms. Therefore, we, for the first time, recognized a new class of polypeptides with nanospring behaviors. </p><p>Protein-based force probes for gauging molecular interactions: We developed protein-based force probes for simple, robust and general AFM assays to accurately measure intermolecular forces between self-oligomerization of two or more arbitrary polypeptides that potentially can serve as molecular crosslinkers. For demonstration, we genetically connected the force probe to the Strep-tag II and mixed it with its molecular self-assembling partner, the Strep-Tactin. Clearly characterized force fingerprints by the force probe allowed identification of molecular interactions of the single Strep-tag II and Strep-Tactin complex when the complex is stretched by AFM. We found a single energy barrier exists between Strep-tag II and Strep-Tactin in our given loading rates. Based upon our demonstration, the use of the force probe can be expanded to investigate the strength of interactions within many protein complexes composed of homo- and hetero-dimers, and even higher oligomeric forms. Obtained information can be used to choose potential self-assembling crosslinkers which can connect elastomeric proteins with appropriate strength in higher-order structures. </p><p>Self-assembled nano-structured biomaterials with well-defined protein-based building blocks: We constructed well-defined protein building blocks with tailored mechanical properties for self-assembled nano-structured materials. We engineered protein constructs composed of tandem repeats of either a I27-SNase dimer or a I27 domain alone and terminated them with a monomeric streptavidin which is known to form extremely stable tetramers naturally. By using molecular biology and AFM imaging techniques, we found that these protein building blocks transformed into stable tetrameric complexes. By using AFM based SMFS, we measured, to our knowledge for the first time, the mechanical strength of the streptavidin tetramer at a single-molecule level and captured its mechanical anisotropy. Using streptavidin tetramers as crosslinkers offers a unique opportunity to create well-defined protein based self-assembled materials that preserve the molecular properties of their building blocks.</p> / Dissertation

We use time-lapse AFM to visualize collagen fibrils self-assembly. A solution of acid-solubilized collagen was injected into the AFM fluid cell and fibril formation was observed in vitro. Single fibrils continuously grew and fused with each other until the supporting surface was completely covered by a nanoscopically well-defined collagen matrix. Laterally, the fibrils grew in steps of ~4 nm suggesting a two-step mechanism. In a first step, collagen molecules associated together. In the second step, these molecules rearranged into a structure called a microfibril. High-resolution AFM topographs revealed substructural details of the D-band architecture. These substructures correlated well with those revealed from positively stained collagen fibers imaged by transmission electron microscopy. Secondly, a covalent assembly approach to prepare membrane protein for AFM imaging that avoids crystallization was proposed. High-resolution AFM topographs can reveal structural details of single membrane proteins but, as a prerequisite, the proteins must be adsorbed to atomically flat mica and densely packed in a membrane to restrict their lateral mobility. Atomically flat gold, engineered proteins, and chemically modified lipids were combined to rapidly assemble immobile and fully oriented samples. The resulting AFM topographs of single membrane proteins were used to create averaged structures with a resolution approaching that of 2D crystals. Finally, the contribution of specific amino acid residues to the stability of membrane proteins was studied. Two structurally similar proteins sharing only 30% sequence identity were compared. Single-molecule atomic force microscopy and spectroscopy was used to detect molecular interactions stabilizing halorhodopsin (HR) and bacteriorhodopsin (BR). Their unfolding pathways and polypeptide regions that established stable segments were compared. Both proteins unfolded exactly via the same intermediates. This 3 Molecular Assemblies observed by AFM observation implies that these stabilizing regions result from comprehensive contacts of all amino acids within them and that different amino acid compositions can establish structurally indistinguishable energetic barriers. However, one additional unfolding barrier located in a short segment of helix E was detected for HR. This barrier correlated with a Pi-bulk interaction, which locally disrupts helix E and divides into two stable segments.