This dissertation describes our study of a photophysical process that leads to ultrafast generation of triplet excitons following photoexcitation, singlet exciton fission, in three different acene dimers and diradicaloids. In pentacene and tetracene dimers, we investigate their mechanism of singlet fission. In a series of diradicaloids, we study the relation between molecular structure, diradical character and the suitability for singlet fission. In the first two chapters we explore singlet fission in pentacene dimer. We demonstrate fast and highly efficient intramolecular singlet fission, consisting of two covalently attached pentacene units. The singlet fission pathway is governed by the energy gap between singlet and charge-transfer states, which change dynamically with molecular geometry but are primarily set by the side group. The process exhibits a sensitivity to solvent polarity and competes with geometric relaxation in the singlet state, while subsequent triplet decay is strongly dependent on conformational freedom. The near orthogonal arrangement of the pentacene units is unlike any structure currently proposed for efficient singlet fission and points toward new molecular design rules. Furthermore, these results are the first to demonstrate the role of charge-transfer states in singlet fission and highlight the importance of solubilising groups to optimise excited-state photophysics. In the next chapter, we examine singlet fission in tetracene dimer, where singlet fission is energetically unfavourable. We demonstrate triplet yield as high as 190% can be achieved via fission from higher singlet excited states mediated by charge-transfer states. The outcomes of this study provide deeper insight into the role of hot singlet states in singlet fission and point toward less stringent molecular design rules. In the last chapter, we shift our focus on a new class of molecules, diradicaloid molecules. We explore a family of zethrene molecules, with tuneable diradical character, and demonstrate their general ability to undergo rapid singlet fission via spin-entangled and emissive triplet-pair state TT. A wide range of zethrene molecules are found to be suitable for singlet fission, with additional benefits of high absorption coefficients and photo-/chemical stability.

Spin interactions play a key role in the function of molecular materials from naturally occurring biological complexes to synthetic materials for light-harvesting and light-emission. This thesis investigates the spin interactions of spin-1 triplet excitons formed by singlet fission. Singlet fission produces two triplet excitons from one light-induced singlet state and holds promise to enable solar energy generation beyond traditional efficiency limits. As the lifetime of triplet pairs depends sensitively on their spin degree of freedom, in this thesis we deploy spin-sensitive techniques to understand the interactions and evolution of triplet pairs. After introducing the relevant theoretical and experimental background underlying singlet fission and the role of spin, we describe the first observation of strongly exchange coupled, high-spin triplet-pair states ($S=2$) in a solid-state organic semiconductor and show that the singlet fission process allows for the formation of long-lived, strongly coupled spin-two states. We then describe the development and use of photoluminescence-detected avoided level-crossings in applied magnetic fields to quantify the strength of exchange coupling and identify specific optical signatures of exchange-coupled triplet pairs. Using high magnetic fields ($\leq\mbox{60 T}$) we isolate and measure the exchange coupling and optical signatures of multiple distinct triplet pairs in the same material. Finally, we probe the mechanisms of formation and decay of spin polarization from triplet pair states using pulsed spin resonance. The measured dynamics are consistent with polarization driven by fluctuations in exchange coupling between pairs and spin-orbit mediated decay of triplet excitons to the ground state. The combined measurements of the spin parameters and polarization dynamics of triplet pairs from ns to ms timescales provides a quantitative picture of the spin states generated by singlet fission.

In this dissertation, we investigate two emerging strategies for enhancing the performance of organic photovoltaics. The first takes advantage of a process called singlet exciton fission, and the second embodies an exodus from the fullerene electron acceptors prominent in organic solar cells. Indeed, this versatile class of tunable small molecules are aptly termed nonfullerene acceptors. However, both strategies would benefit from a greater understanding of underlying principles. Singlet exciton fission is a photon-multiplying process in which a singlet exciton from a high-energy absorbed photon splits into two triplet excitons. The process could significantly reduce energy lost to heat in photovoltaic devices, but its mechanisms are still misunderstood. One model involves direct coupling between the singlet and triplet states, and another model involves an intermediate charge transfer state. Transient absorption spectroscopy allowed us to examine singlet fission in films of pentacene, fluorinated pentacene, and coevaporated blends of various mixing ratios. We directly observe an intermolecular charge transfer state during singlet fission in solid films of coevaporated pentacene and peruoropentacene, which supports the model of charge transfer state-mediated singlet fission. Furthermore, we successfully induced singlet fission in one blend by directly exciting the charge transfer state below the bandgap. We use various types of steady state and time-resolved spectroscopy to characterize two types of nonfullerene electron acceptors. The first type is a group of tetraazabenzodiuoranthene diimide (BFI) dimers and a BFI monomer. The BFI dimers were designed to have twisted, nonplanar 3-dimensional structures and have helped achieve power conversion efficiencies of over 8% in organic solar cells. The other type of nonfullerene acceptor is a calamitic small molecule, and we consider the BAF-4CN electron acceptor, which has also been used in a solar cell whose efficiency exceeded 8%. Spectroscopic studies give insight into the performances of these nonfullerene devices in relation to fullerene-derivative counterparts. We find that the nonfullerene blends suffer from more geminate charge recombination. However, despite this drawback, in some cases, slower rates of nongeminate recombination may lead to successful power conversion efficiencies in nonfullerene solar cells.

Acenes have been explored by a number of research groups in the field of organic electronics with a particular emphasis on transistor materials. This group has been actively studying acene‐based organic semiconductors for more than a decade using a crystal engineering approach and has developed acene derivatives for applications in field‐effect transistors, light‐emitting diodes, and photovoltaics. In addition to organic electronics, crystal engineering has important applications in a number of other fields, quite notably in the design of metal‐organic frameworks. Chapters 2 and 3 of this dissertation focus on applying crystal engineering to the synthesis of acene derivatives for use as solid‐state, long‐wavelength fluorescent organic dyes in the field of biomedical imaging. More specifically, this work studied the synthesis and properties of dioxolane‐functionalized pentacenes and hexacenes. One of these pentacene derivatives has already been demonstrated in biomedical imaging which may lead to improved treatment of tuberculosis. The dioxolane‐functionalized hexacene is still under evaluation for bioimaging applications. Chapters 4 and 5 focus on crystal engineering in relation to organic electronics. Chapter 4 deals with fine‐tuning of crystal packing and demonstrated that small differences in molecular structure can result in significant changes to the solid‐state structure which affects semiconductor properties. Finally, chapter 5 studies the use of singlet fission in photovoltaics and demonstrated that this process does occur in a solar cell incorporating a hexacene derivative. Pentadithiophenes were also synthesized for singlet fission photovoltaics, but they have yet to be studied further.

The impetus of unsustainable consumption coupled with major environmental concerns has renewed our society's investment in new energy production methods. Solar energy is the poster child of clean, renewable energy. Its favorable environmental attributes have greatly enhanced demand resulting in a spur of development and innovation. Photovoltaics, which convert light directly into usable electrical energy, have the potential to transform future energy production. The benefit of direct conversion is nearly maintenance free operation enabling deployment directly within urban centers. The greatest challenge for photovoltaics is competing economically with current energy production methods. Lowering the cost of photovoltaics, specifically through increasing the conversion efficiency of the active absorbing layer, may enable the invisible hand to bypass bureaucracy. To accomplish the ultimate goal of increased efficiency and lowered cost, it is essential to develop new material systems that provide enhanced output or lowered cost with respect to current technologies. However, new materials require new understanding of the physical principles governing device operation. It is my hope that elucidating the dynamics and charge transfer mechanisms in novel photovoltaic material systems will lead to enhanced design principles and improved material selection. Presented is the investigation of electron dynamics in two materials systems that show great promise as active absorbers for photovoltaic applications: inorganic semiconductor quantum dots and organic semiconductors. Common to both materials is the strong Coulomb interaction due to quantum confinement in the former and the low dielectric constant in the latter. The perceived enhancement in Coulomb interaction in quantum dots is believed to result in efficient multiexciton generation (MEG), while discretization of electronic states is proposed to slow hot carrier cooling. Time-resolved two-photon photoemission (TR2PPE) is utilized to directly map out the hot electron cooling and multiplication dynamics in PbSe quantum dots. Hot electron cooling is found to proceed on ultrafast time scales (< 2ps) and carrier multiplication proceeds through an inefficient bulk-like interband scattering. In organic semiconductors, the strong Coulomb interaction leads to bound electron-hole pairs called excitons. TR2PPE is used to monitor the separation of excitons at the model CuPc/C₆₀ interface. Exciton dissociation is determined to proceed through "hot" charge transfer states that set a fundamental time limit on charge separation. TR2PPE is used to investigate charge and energy transfer from organic semiconductors undergoing singlet fission, an analog of multiple exciton generation. The dynamic competition between one and two-electron transfer is determined for the tetracene/C₆₀ and tetracene/CuPc interfaces. These findings allow for the formulation of design principles for the successful harvesting of hot or multiple carriers for solar energy conversion. / text

A novel route for the synthesis of the polycyclic aromatic hydrocarbon peropyrene (Pp) is reported along with the efforts to synthesize derivatives of Pp, 2,2′- and 5,5′-linked tetracene dimers as candidates for study as singlet fission materials in photovoltaic devices. Peropyrene was synthesized by the McMurry coupling conditions from phenalenone and low-valent titanium species. The crystal structure of Pp is formed by π-stacked molecular pairs in a herringbone arrangement. The direct functionalization of Pp was studied, and several indirect methods for the functionalization of Pp via phenalenone derivatives are reported. Nucleophilicly dependent, regioselective Michael addition pathways for phenalenone are described. Phenalenone forms a nucleophilic complex with bispinacolatodiboron and yields chiral 3,3′-linked phenalenone dimers and a bicyclo[3.2.1]octane derivative product of an unusual 3,4 addition. An active complex product of phenalenone and (dimethylphenylsilyl)boronic acid pinacolic ester forms Pp directly. The synthesis of 2,2′- and 5,5′-linked tetracene dimers led to the study of the reduction of 1-arylprop-2-yn-1-ol derivatives via TFA-catalyzed hydride transfer from triethylsilane. Substrates with terminal and TMS-protected alkynes showed silane exchange upon reduction. A TMS-protected, terminal alkyne became triethylsilyl-protected by about 50% whereas only triethylsilyl-protected, terminal alkyne was observed from the reduction of an unprotected, terminal alkyne. A new conformational polymorph of 1,4-bis(triisopropylsilyl)buta-1,3-diyne is reported. Five other rotamers are studied by density functional theory as possible candidates of conformational polymorphism by the analysis of torsional strain energies. The relative stabilities and interconversion equilibria of the seven conformational isomers are studied.

京都大学 / 0048 / 新制・課程博士 / 博士(理学) / 甲第22876号 / 理博第4642号 / 新制||理||1667(附属図書館) / 京都大学大学院理学研究科化学専攻 / (主査)教授 寺西 利治, 教授 島川 祐一, 教授 長谷川 健 / 学位規則第4条第1項該当 / Doctor of Science / Kyoto University / DGAM

In this dissertation, the laser spectroscopic methods, second harmonic generation (SHG) and ultrafast transient absorption, have been employed to study the reactions and dynamics in two different types of materials, namely, silver nanoparticles and micro-sized ultrathin crystalline oligoacenes. These two materials, although both are in small dimensions, represent two distinct types of systems with divergent characteristics: 1) systems in which interactions at the surface/interface are dominant, and 2) systems in which bulk interactions are dominant. Silver nanoparticles are an important member of the class of noble metal nanoparticles, and possess unique optical and chemical properties due to their ultrafine size and high surface-to-volume ratio. Strong SHG signal has been observed from silver nanoparticles dispersed in aqueous colloidal solution, in which the SHG signal is enhanced due to a resonance with the localized surface plasmon of silver nanoparticles. Further experiments proved that the SHG signal predominantly originates from the particle surface, in full agreement with the intrinsically interface-sensitive properties of SHG. With the surface origin of the signal now well established, SHG can be used to probe the adsorption and reactions of thiol molecules at the nanoparticle surface in situ and in real time. It is experimentally demonstrated that the free energy change, activation energy, as well as adsorption density of the reactions of a variety of neutral and anionic thiols at the particle surface can be measured by means of SHG. The reaction mechanisms at the molecular level have been deduced, and the neutral vs anionic thiols are found to exhibit qualitatively different reaction mechanisms that reflect the effect of their molecular interactions with the particle surface. Oligoacenes, such as pentacene and hexacene, constitute a family of organic semiconductors that exhibit remarkable optoelectronic properties. In contrast to the nanoparticles in which surface interactions are dominant, as the sizes of materials become larger, the bulk characteristics become more deterministic. Therefore, polarized linear absorption and transient absorption spectroscopies have been applied to study the excitonic properties of crystalline pentacene and the mechanism of singlet fission in crystalline hexacene, respectively. The polarized absorption spectra of crystalline pentacene have been obtained by measuring transmitted light normal to the ab herringbone plane of micro-sized ultrathin single crystals. The significant deviations between the spectral line shapes polarized along the b-axis and orthogonal to the b-axis provide detailed information on the anisotropic mixing nature of the Frenkel/charge-transfer excitons responsible for the pronounced Davydov splitting between the lowest-energy singlet states. Additionally, both singlet and triplet Davydov splittings were also observed from the linear and transient absorption experiments in micrometer-sized ultrathin hexacene single crystals. A two-step process of anisotropic singlet fission was uncovered from the kinetic data, in which singlet fission at different rates were deduced along the a- and b-axes. Both the spectral and kinetic features indicate that singlet fission in crystalline hexacene is an anisotropic and charge-transfer mediated many-molecule process. / Chemistry

This dissertation describes our study on different physical properties of passivated and chemically modified hybrid metal halide perovskite materials and development of highly efficient charge transport layers for perovskite solar cells. We first developed an efficient electron transport layer via modification of titanium dioxide nanostructure followed by a unique chemical treatment in order to have clean interface with fast electron injection form the absorber layer in the perovskite solar cells. We then explored monovalent cation doping of lead halide perovskites using sodium, copper and silver with similar ionic radii to lead to enhance structural and optoelectronic properties leading to higher photovoltaic performance of the resulting perovskite solar cells. We also performed thorough experimental characterizations together with modeling to further understand the chemical distribution and local structure of perovskite films upon monovalent cation doping. Then, we demonstrate a novel passivation approach in alloyed perovskite films to inhibit the ion segregation and parasitic non-radiative losses, which are key barriers against the continuous bandgap tunability and potential for high-performance of metal halide perovskites in device applications, by decorating the surfaces and grain boundaries with potassium halides. This leads to luminescence quantum yields approaching unity while maintaining high charge mobilities along with the inhibition of transient photo-induced ion migration processes even in mixed halide perovskites that otherwise show bandgap instabilities. We demonstrate a wide range of bandgaps stabilized against photo-induced ion migration, leading to solar cell power conversion efficiencies of 21.6% for a 1.56 eV absorber and 18.3% for a 1.78 eV absorber ideally suited for tandem solar cells. We then systematically compare the optoelectronic properties and moisture stability of the two developed passivation routes for alloyed perovskites with rubidium and potassium where the latter passivation route showed higher stability and loading capacity leading to achieve substantially higher photoluminescence quantum yield. Finally, we explored the possibility of singlet exciton fission between low bandgap perovskites and tetracene as the triplet sensitizer finding no significant energy transfer between the two. We then used tetracene as an efficient dopant-free hole transport layer providing clean interfaces with perovskite layer leading to high photoluminescence yield (e.g. ~18%). To enhance the poor ohmic contact between tetracene and the metal electrode, we added capping layer of a second hole transport layer which is extrinsically doped leading to 21.5% power conversion efficiency for the subsequent solar cells and stabilised power output over 550 hours continuous illumination.

No description available.