No description available.

No description available.

No description available.

Ingots containing single crystals were grown from melts of Cu, In and Se in either stoichiometric proportions (CuInSe2) or with an excess of Se (CuInSe2.2). In addition, either sodium selenide (Na 2Se) or elemental sodium (Na0) was introduced to both sets of compositions in concentrations ranging from 0 to 3 at. %. The starting constituents were placed in quartz ampoules, which were evacuated and sealed before undergoing a vertical-Bridgman growth procedure. Analysis of deposits seen on the ampoule walls and on the ingot surface after growth revealed the presence of Na, as well as various forms of the other starting elements; however, no Na was found within the crystals. Electrical measurements revealed trends in the thermoelectric power of the ingots to correspond with additions of Na, as well as the presence of excess Se. A sign conversion from p- to n-type was confirmed with addition of sodium to stoichiometric CuInSe2. A suggested mechanism used to explain the effects of Na on the material, based on these experimental observations, is presented.

No description available.

Superhydrophobic surfaces, which display water contact angles of larger than 150°, have attracted more and more attention due to their importance in both fundamental research and practical applications. This dissertation is mainly focused on the fundamental understanding and exploring applications of superhydrophobic surfaces. First, some specific examples of superhydrophobic surface fabrication were given, which include superoleophobic Si surface, robust superhydrophobic SiC surface, and reversible wettability nanocomposite films. Based on the study of superhydrophobic surfaces, the application of superhydrophobic surfaces in electronic packaging were explored. Superhydrophobic silica/epoxy nanocomposite coating serves as an encapsulant to improve the electronic device reliability. Such superhydrophobic coating showed good stability under humidity at elevated temperatures and was applied on the triple track resistors test coupons. In addition, the applications of superhydrophobic surfaces in solar cells were studied. Two multi-functional hierarchical structure solar cells with self-cleaning, low reflection and high efficiency properties were built up by coating or etching methods.

A successful model that could accurately predict the performances of n+-p-p+ concentrator solar cells should include a model of carrier photogeneration rates consistent with the spectral content of the incident light. Furthermore, a finite back surface recombination velocity should be considered since new techniques such as 'Back Surface Field' were developed to reduce the recombination rate at the rear of the cell.In the present work, a two-dimensional concentrator solar cell is modeled for low levels of injection. The model however, assumes an incident light containing one single wavelength. The incident light is assumed to decrease linearly from the center of the illuminated area until it vanishes at the edges of the cell. Finite recombination velocities are taken into account at the front and the back surfaces. Finite-width space charge regions are also included. The transport equations are solved for the carrier concentrations in different regions of the cell. The current density expressions are derived. The generation of theoretical current voltage characteristics is outlined. However, the use of these characteristics to predict cell performances is left for further research. / Department of Physics and Astronomy

The present thesis is focused on rational design and synthesis of π-conjugated donoracceptor-donor (D-A-D) type oligomers and D-A type copolymers. Thesis is organized in seven chapters, apart from introduction remaining six chapters are grouped into two parts (A and B). Part A deals with Chapters 2, 3, 4 and Part B contains chapters 5, 6 and 7. A brief discussion on the content of individual chapters is provided below. Chapter 1 discusses the introduction to organic solar cell with operating principles and effect of spinodal decomposition on stability of the devices is presented. The status and literature related to the improvement of life time of the organic solar cells by self-assembly approach has been explored. In addition, design and synthesis of the fluorine substituted π-conjugated organic semiconductors for n-type OFETs and OLED has been discussed. Part A This part of the thesis attempt to address some of the challenges listed below (1) Investigation of miscibility of binary components in bulk heterojunction solar cells through H-bonding approach. (2) Synthesis of new low band gap molecular semiconductors having H-bonding sites. (3) Fabrication of bulk heterojunction solar cell devices using these new molecules and exploring the photovoltaics performance. Chapter 2, donor-acceptor-donor (D-A-D) concept has been employed to design low band gap oligomers named as TTB. Barbiturate functional group has been utilized to explore the concepts of supramolecular chemistry. It is shown that, TTB molecule self-organizes via intermolecular H-bonding between barbituric acid units. Interactions between the oligothiophene subunits were also found to be important, affording nanoribbons that were observed by atomic force and transmission electron microscopy. The applicability of TTB for organic electronic applications was investigated by fabricating organic field-effect transistors (OFETs) and organic photovoltaic device. The crystalline nanoribbons were beneficial in understanding the phase morphology of PCBM and TTB blend. Chapter 3, the self-assemble property of TTB was disrupted by the substitution of methyl group on the nitrogen of the barbituric acid moiety. The optical and electrochemical properties of the new derivative have been investigated by UV-Visible spectroscopy, photoluminescence spectroscopy and cyclic voltammetry. Further investigations on the effect of self-assembly on organic solar cells were carried out by fabricating BHJ and OFET. The results proved that the self-assembly within the donor moieties led to complete phase separation between the donor and acceptor which had an adverse effect on the photovoltaic performance. Chapter 4, the conjugation of TTB was extended by the synthesis of two new copolymers by polymerizing with two oliogothiophene (terthiophene and benzobithiophene) derivatives with different donating strength. The investigation of photophysical and electrochemical properties of copolymers were studied by varying the donating strength. As we increase the donating strength of oligothiophenes, the intramolecular charge transfer band of DA copolymers was red shifted. Further, density functional theory (DFT) calculation of these materials was carried out to get insight into their photophysical properties. Part B This part of the thesis attempt to address some of the challenges listed below (1) Investigation of fluorine substituted organic semiconductos like 2,2’ bithiazole and pheanthroimidazole. (2) Synthesis of pentafluoro phenyl appended derivatives of 2,2’ bithiazole and pheanthroimidazole. (3) Fabrication of OFETs and OLEDs using these new molecules and elucidated the device performance with molecular structure. Chapter 5, pentafluorophenyl appended 2,2’-bithiazole derivatives were synthesized. The single crystal x-ray diffraction studies shows the unusual strong type-II F•••F interactions within the distance of 2.668 Å, at an angle of 89.14° and 174.15°. It also shows the usual type-I F•••F interaction within the distance of 2.825Å, at an angle of 137.38° and 135.93°. Upon bromination type-II Br•••Br interaction was observed and the packing was further stabilized by S•••Br interactions. The conjugation was further extended with different aromatic and heteroaromatic substituents and synthesized the star shaped structure. The band gap as well as the electronic energy levels was tuned by substituting various aromatic and heteroaromatic substituents. These star shaped derivatives shows electron mobilities in the order of 10-4 to 10-3cm2/Vs. Chapter 6, Novel D-A copolymers were synthesized by Stille condensation of electron acceptor fluorinated phenanthroimidazole with electron donors like terthiophene and benzobithiophene. Prior to that insoluble pentafluoro phenyl phenanthroimidazole was Nalkylated in presence of DMF which concurrently resulted in C-F activation of the pentafluoro phenyl moiety. As we increase the donor strength from benzobithiophene to terthiophene the absorbance spectra was red shifted from 446 nm to 482 nm in solution and 455 nm to 484 nm in solid state. The band gap of these copolymers was found to be 2.4 eV for PIBDT and 2.2 eV for PIDHTT from the absorbance spectra. The photoluminescence data shows that these materials are promising for the yellow colour as well as orange colour displays, of narrow wavelength range (FWHM 40 nm for PIBDT and 35 nm for PIDHTT), which can be achieved just by the manipulation of donor moieties in the copolymers. The preliminary electroluminiscence data shows high brightness of 888cd/m2 (orange luminescence) for PIDHTT and 410cd/m2 (yellow luminescence) for PIBDT. Chapter 7, Acenaphtho[1,2-b]quinoxaline based donor–acceptor type low band gap conjugated copolymers were synthesized by Stille coupling reaction with the corresponding oligothiophene derivatives. The optical properties of the copolymers were characterized by ultraviolet-visible spectrometry while the electrochemical properties were determined by cyclic voltammetry. The band gap of these polymers was found to be in the range of 1.8-2.0 eV as calculated from the optical absorption band edge. The intense charge transfer band in absorption spectra shows the significant effect of acceptor in the copolymers. X-ray diffraction measurements show weak π–π stacking interactions between the polymer chains. The OFET devices fabricated using these co-polymers showed dominant p-channel transistor behavior with the highest mobility of 1×10-3cm2/Vs.

Organic solar cells using carbon based materials have the potential to deliver cheap solar electricity. The aim is to be able to produce solar cells with common printing techniques on flexible substrates, and as organic materials can be made soluble in various solvents, they are well adapted to such techniques. There is a large variation of organic materials produced for solar cells, both small molecules and polymers. Alterations of the molecular structure induce changes of the electrical and optical properties, such as band gap, mobility and light absorption. During the development of organic solar cells, the step of mixing of an electron donor and an electron acceptor caused a leap in power conversion efficiency improvement, due to an enhanced exciton dissociation rate. Top performing organic solar cells now exhibit a power conversion efficiency of over 10%. Currently, a mix of a conjugated polymer, or smaller molecule, and a fullerene derivative are commonly used as electron donor and acceptor. Here, the blend morphology plays an important role. Excitons formed in either of the donor or acceptor phase need to diffuse to the vicinity of the donor-acceptor interface to efficiently dissociate. Exciton diffusion lengths in organic materials are usually in the order of 5-10 nm, so the phases should not be much larger than this, for good exciton quenching. These charges must also be extracted, which implies that a network connected to the electrodes is needed. Consequently, a balance of these demands is important for the production of efficient organic solar cells. Morphology has been found to have a significant impact on the solar cell behaviour and has thus been widely studied. The aim of this work has been to visualize the morphology of active layers of organic solar cells in three dimensions by the use of electron tomography. The technique has been applied to materials consisting of conjugated polymers blended with fullerene derivatives. Though the contrast in these blends is poor, three-dimensional reconstructions have been produced, showing the phase formation in three dimensions at the scale of a few nanometres. Several material systems have been investigated and preparation techniques compared. Even if excitons are readily dissociated and paths for charge extraction exist, the low charge mobilities of many materials put a limit on film thickness. Although more light could be absorbed by increased film thickness, performance is hampered due to increased charge recombination. A large amount of light is thus reflected and not used for energy conversion. Much work has been put into increasing the light absorption without hampering the solar cell performance. Aside from improved material properties, various light trapping techniques have been studied. The aim is here to increase the optical path length in the active layer, and in this way improve the absorption without enhanced extinction coefficient. At much larger dimensions, light trapping in solar cells with folded configuration has been studied by the use of optical modelling. An advantage of these V-cells is that two materials with complementing optical properties may be used together to form a tandem solar cell, which may be connected in either serial or parallel configuration, with maintained light trapping feature. In this work optical absorption in V-cells has been modelled and compared to that of planar ones.

This thesis reports the spectroscopic and computational studies of two classes of compounds, which have applications in new optoelectronic materials technology. Substituted ligands of dipyrido-[3,2a:2�,3�c]phenazine (dppz), and their Cu(I), Re(I) and Ru(II) complexes have utility in organic electroluminescent devices. A series of Zn(II) tetraphenylporphyrins with conjugated functional groups at the β-position have been used with success in liquid heterojunction dye-sensitized solar cells. The vibrational spectra and optoelectronic properties of the two classes were investigated using Raman, resonance Raman and transient resonance Raman spectroscopy, in conjunction with density functional theory methods. Density functional theory frequency calculations were used to aid vibrational mode assignments for the dppz compounds, and show close agreement with the experimental non-resonance Raman spectra. The enhancement of modes which are localized on differing sections of the ligand was identified. The nature of the absorbing chromophores for the dppz ligands and complexes was established using resonance Raman spectroscopy in concert with vibrational assignments from calculations. Transient resonance Raman spectra of the ligands provided spectral signatures for the triplet ligand-centred state; these features were observed in the TR� spectra of the metal complexes, along with other features attributable to MLCT states. Electroluminescent devices were fabricated using the dppz ligands and complexes as emissive dopants, and their properties investigated. The optoelectronic behaviour of the devices was found to be influenced by the mechanism of exciton formation on the dopant. The device properties were also dependent on the dopant concentration, the concentrations of other components and the driving voltage. The electronic structure of the porphyrin compounds was investigated using time-dependent density functional theory methods. Comparison of calculated optical transitions with experimental data shows that the calculations predict trends in the optical absorption spectra with change of functional group and with increase in conjugation chain length. The calculations suggest that the electron-withdrawing substituent decreases the configuration interaction effect by breaking the degeneracy of the two lowest unoccupied MOs, and other configuration interaction effects come into play involving other frontier MOs. Interrupting the conjugation of the functional group is shown to mitigate the breakdown of the configuration interaction. The perturbation of the normal electronic structure of the porphyrin by the substituent was also investigated using resonance Raman spectroscopy. Vibrational analysis identified bands due to the substituent, implying coupling between the porphyrin and substituent chromophores. Changes in frequency of porphyrin core modes due to the differing substituents and different metal centres were reproduced by density functional theory calculations. This project has allowed the spectroscopic investigation of the active optical states in a number of polypyridyl and porphyrin compounds, and determined the efficacy of DFT and TDDFT calculations to predict the properties of these compounds.