Spelling suggestions: "subject:"undertransmission."" "subject:"andtransmission.""
51 |
Incorporating Flax Fiber Composites in Hypercar Panels / Implementering av linfiberkomposit i hyperbilpanelerÖster, Hanna, Isorena Guðjónsdóttir, Sara January 2023 (has links)
This thesis investigates sound transmission loss through flat finite panels using composite materials, which incorporate both carbon and flax fibres. The study wascarried out by performing FEM simulations developed and validated in steps. Thevalidation process was time-consuming but crucial in ensuring the model’s reliability.The analysis demonstrates the relationship between the panels’ mass, stiffness, andsound reduction effectiveness by studying the sound transmission loss for a flat plate.The results show how by adjusting the plate’s stiffness, thickness, and mass one cancontrol its reaction to the incoming sound. This allows resonance frequencies to beshifted away from critical points and avoids coincidence frequencies. By understanding the acoustic behavior of composite panels, this research contributes to improvingsoundproofing properties while preserving their mechanical advantages. In an era ofgrowing demand for better acoustic performance in the automotive industry, exploring innovative methods to optimize the sound transmission loss of composite panelsis essential. / Denna studie undersöker ljudöverföringsförluster genom platta finita paneler sombestår av kompositmaterial, som innehåller både kol- och linfiber. Studien utförFEM-simuleringar som utvecklats och validerats i steg. Valideringsprocessen vartidskrävande men avgörande för att säkerställa modellernas tillförlitlighet. Analysenvisar sambandet mellan panelernas massa, styvhet och ljudreducerande effektivitetgenom att studera ljudtransmissionsförluster för en platt panel. Resultatet visarhur justering av plattans styvhet, tjocklek och massa kan styra dess reaktion på detinkommande ljudet, vilket gör att resonansfrekvenser kan flyttas bort från kritiskapunkter och undvika sammanfallande frekvenser. Genom att förstå det akustiskabeteendet hos kompositpaneler bidrar denna studie till att förbättra ljudisoleringsegenskaperna samtidigt som deras mekaniska fördelar bevaras. I en tid av växande efterfrågan på bättre akustisk prestanda inom bilindustrin, blir det viktigt att utforska innovativa metoder för att optimera ljudöverföringsförlusten hos kompositpaneler.
|
52 |
<b>Machine Sound Recognition for Smart Monitoring</b>Eunseob Kim (11791952) 17 April 2024 (has links)
<p dir="ltr">The onset of smart manufacturing signifies a crucial shift in the industrial landscape, underscoring the pressing need for systems capable of adapting to and managing the complex dynamics of modern production environments. In this context, the importance of smart monitoring becomes increasingly apparent, serving as a vital tool for ensuring operational efficiency and reliability. Inspired by the critical role of auditory perception in human decision-making, this study investigated the application of machine sound recognition for practical use in manufacturing environments. Addressing the challenge of utilizing machine sounds in the loud noises of factories, the study employed an Internal Sound Sensor (ISS).</p><p dir="ltr">The study examined how sound propagates through structures and further explored acoustic characteristics of the ISS, aiming to apply these findings in machine monitoring. To leverage the ISS effectively and achieve a higher level of monitoring, a smart sound monitoring framework was proposed to integrate sound monitoring with machine data and human-machine interface. Designed for applicability and cost effectiveness, this system employs real-time edge computing, making it adaptable for use in various industrial settings.</p><p dir="ltr">The proposed framework and ISS deployed across a diverse range of production environments, showcasing a leap forward in the integration of smart technologies in manufacturing. Their application extends beyond continuous manufacturing to include discrete manufacturing systems, demonstrating adaptability. By analyzing sound signals from various production equipment, this study delves into developing machine sound recognition models that predict operational states and productivity, aiming to enhance manufacturing efficiency and oversight on real factory floors. This comprehensive and practical approach underlines the framework's potential to revolutionize operational management and manufacturing productivity. The study progressed to integrating manufacturing context with sound data, advancing towards high-level monitoring for diagnostic predictions and digital twin. This approach confirmed sound recognition's role in manufacturing diagnostics, laying a foundation for future smart monitoring improvements.</p>
|
53 |
AVALIAÇÃO DA PERDA DE TRANSMISSÃO SONORA EM PAREDES EXTERNAS DE LIGHT STEEL FRAME / EVALUATION OF SOUND TRANSMISSION LOSS IN LIGHT STEEL FRAME EXTERNAL WALLSRadavelli, Graziella Ferrer 11 December 2014 (has links)
Environmental noise at high levels and inappropriate construction techniques used in
conventional buildings in Brazil claim for a transition to better construction systems. Recently
the Brazilian standard NBR 15575:2013 established for the first time parameters and criteria
for residential building performance. In standard minimum requirements for sound insulation
are given, for example for external walls and roof structures. This way it is of fundamental
importance to have sound transmission loss data for diferente types of such elements at hand.
Taking into account that there is very little information on the sound transmission loss of
external walls of the light steel frame (LSF) type measurements of sound insulation of
different vertical external LSF walls typically used in Brazil were carried out. Eighteen
different LSF walls were mounted in the sound transmission measurement chamber of the
Federal University of Santa Maria and measurements were carried out in accordance with ISO
10140:2010. Sound insulation was characterized by means of the sound reduction index R, the
weighted sound reduction index Rw and the sound transmission class, making it possible to
compare the sound insulation of the LSF walls with data from the literature. The LSF walls
under investigation in this study used different materials such as OSB panels, cement boards,
plaster boards, Smartside panels, PVC panels, XPS panels and magnesium oxide boards for
the outer face. The influence of resilient channels and sponge tape, placed between the outer
face and the metalic studes, were also evaluated. The sound insulation of the diferente LSF
walls were found to be 43 dB ≤ Rw ≤ 50 dB and 45 dB ≤ STC ≤ 52 dB. Within the LSF walls
measured the one which used magnesium oxide boards on the outer face showed to have the
highest weight sound reduction index (Rw = 50 dB). Resilient channels, fabricated especially
for this study, and sponge tape were able to provide an increase of Rw and STC up to 5 dB
compared to the same wall without this resilient elements, and provide better sound insulation
especially for frequencies higher than 400 Hz. From the data it can be concluded that LSF
walls are more efficient regarding the sound insulation than single walls of the same surface
mass and in some cases even better than single walls of superior surface mass, such as walls
made of massive brick or concrete blocks. / O excesso de ruído ambiental e as inadequadas técnicas construtivas dos sistemas
convencionais utilizados no mercado da construção civil brasileira, fazem com que seja
necessária a introdução de novas tecnologias construtivas mais racionais e produtivas. A
partir da entrada em vigor da NBR 15575:2013 foram estabelecidos diversos parâmetros de
desempenho para edificações habitacionais. A referida norma também estabelece exigências
mínimas de isolamento acústico para os sistemas que compõem as edificações, entre eles, as
vedações verticais. Desta forma, informações sobre o isolamento acústico providenciado
pelos diferentes sistemas construtivos tornaram-se de fundamental importância. Tendo em
vista a pouca informação existente na literatura sobre o isolamento sonoro de paredes externas
em light steel frame (LSF), foram realizadas medições de perda de transmissão sonora em
paredes externas executadas neste sistema construtivo, usadas tipicamente no mercado
brasileiro. Dezoito composições de paredes em LSF foram montadas na câmara reverberante
de transmissão sonora da UFSM para realização dos ensaios de perda de transmissão
conforme procedimentos propostos pela ISO 10140:2010. O isolamento sonoro foi
quantificado a partir dos espectros do índice de redução sonora R, pelo índice de redução
sonora ponderado Rw e pela classe de transmissão sonora STC, facilitando a comparação entre
diferentes composições de parede e dados de isolamento sonoro encontrados na bibliografia.
Os principais materiais utilizados no revestimento das paredes LSF foram paineis OSB,
placas cimentícias, placas de gesso acartonado, réguas Smartside, réguas de siding vinílico,
painéis XPS e placas de óxido de magnésio. A influência da utilização de barras resilientes e
fitas de espuma de PVC, entre as placas de revestimento e a estrutura metálica, também foi
avaliada. Determinou-se que o isolamento sonoro das diferentes paredes LSF avaliadas é de
43 dB ≤ Rw ≤ 50 dB e 45 dB ≤ STC ≤ 52 dB. Dentre as paredes externas em LSF, aquela que
utilizou placas de óxido de magnésio na face exterior apresentou o maior Rw = 50 dB. As
barras resilientes e fitas de espuma de PVC foram capazes de aumentar o Rw e STC em até 5
dB, se comparado à parede semelhante sem estes dispositivos, especialmente nas frequências
a partir de 400 Hz. A partir da análise dos dados, concluiu-se que as paredes LSF
consideradas paredes duplas são mais eficientes no isolamento sonoro quando comparadas
às paredes simples ou homogêneas de mesma massa e até do que algumas paredes com massa
muito superior, como paredes de tijolos maciços, de blocos de concreto ou de blocos
cerâmicos.
|
54 |
Bird Diversity, Functions and Services across Indonesian Land-use SystemsDarras, Kevin Felix Arno 04 May 2016 (has links)
No description available.
|
55 |
Avaliação de ferramenta de simulação da transmissão sonora para projetos de isolamento acústico em edificações habitacionaisSilva, Renata Costa da 19 July 2014 (has links)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / In July, 2013, Brazil s new standard, NBR15575:2013, began to require minimum
thermal, luminal, structural and acoustical performance levels in new constructions of
residential dwellings. Thus, computer programs that simulate the sound transmission
in buildings, can serve as important tools for professionals, enabling the verification of
virtual acoustic performance of projects, quickly and economically. By being widely used
in European countries, they have the database of existing elements and building systems
in Europe. From this, this study aimed to evaluate a computational tool of simulation of
sound transmission on the reality of Brazilian buildings. Twenty households were selected
in the city of Santa Maria - RS, to be measured in situ and then simulated to airborne and
impact noise. The residences were chosen according to standard and types of building
systems. For greater representation of Brazilian buildings, residences of low, medium
and high standards were chosen. The building systems chosen were structural masonry,
structural walls with concrete or ceramic block; and reinforced concrete, with walls of
hollow brick; all with massive concrete slab. The software used for the simulations was
the SONarchitect and all the features and building elements used were entered into the
software s database. The values of Ln,T , Dn,T , and RT per frequency band, and their
weighted values Ln,T,w, Dn,T,w and mean RT were obtained through measurements and
simulation. The weighted measured and simulated values were similar, on the other hand,
the values obtained by frequency band showed disagreement with the lower frequencies
precisely, from 50 Hz to 100 Hz. There was also a relationship of impact sound transmission
loss with the area size of the partition, in which there is a significant increase in sound
insulation in partitions with larger areas. In addition, coefficients and safety factors were
determined for each standard and building system to be applied in the spectra of the
simulations, aiming to bring the simulated values closer to the measured ones. Parallel
with the evaluation of the computational tool, questionnaires with 150 professionals who
develop acoustic projects in the country were applied. This step had as main objective
to find out what tools and methods are mostly used by professionals in the development
of these projects. From 31 received responses, it was determined that 20.88% of the
professionals use a computational tool to develop designs. It was also possible to discover
some features such as field of expertise and graduation year, which regions they are
located, what kind of projects they develop and if they have already developed projects
based on the new standard. / Com a entrada em vigor, em julho de 2013, da nova norma brasileira, NBR
15575:2013, passaram a ser exigidos nas novas construções de uso multifamiliar, níveis
mínimos de desempenho, tais como térmico, ilumínico, estrutural e acústico. Dessa
maneira, programas computacionais que simulam a transmissão sonora em edificações,
podem servir como ferramentas importantes aos profissionais, permitindo a verificação
do desempenho acústico virtual dos projetos, de forma rápida e econômica. Por serem
amplamente utilizados nos países europeus, possuem banco de dados dos elementos e
sistemas construtivos existentes na Europa. A partir disso, esse trabalho teve como
objetivo a avaliação de uma ferramenta computacional, de simulação da transmissão
sonora, para a realidade das construções brasileiras. Foram selecionadas 20 residências,
na cidade de Santa Maria - RS, para serem medidas in loco e depois simuladas, aos ruídos
aéreo e de impacto. As residências foram escolhidas, de acordo com padrão e sistemas
construtivos. Para maior representatividade das construções brasileiras, foram escolhidas
residências do padrão baixo, médio e alto. Os sistemas construtivos escolhidos foram
alvenaria estrutural, com paredes de bloco estrutural de concreto ou cerâmico; e concreto
armado, com paredes de tijolo vazado; todos com laje maciça de concreto. O programa
utilizado para as simulações foi o SONarchitect e todas as características, dos elementos
construtivos utilizados, foram inseridos no banco de dados do software. Foram obtidos
os valores de Ln,T , Dn,T,, e TR por banda de frequência, e seus valores ponderados de
Ln,T,w, Dn,T,w e TR médio, nas medições e simulações. Os valores ponderados medidos
e simulados foram similares, por outro lado os valores obtidos por banda de frequência
apresentaram divergência em relação às frequências mais baixas, precisamente de 50 Hz
a 100 Hz. Verificou-se também uma relação da perda de transmissão sonora ao ruído de
impacto com o tamanho da área da partição, na qual ocorre um aumento significativo no
isolamento sonoro em partições com áreas maiores. Além disso, foram determinados
coeficientes e fatores de segurança, para cada padrão e sistema construtivo, a serem
aplicados nos espectros das simulações. Com o objetivo de aproximar os valores simulados
dos valores medidos. Paralelamente à avaliação da ferramenta computacional, foram
aplicados questionários com 150 profissionais que desenvolvem projetos acústicos no país.
Essa etapa tinha como objetivo principal descobrir quais ferramentas e métodos são
mais utilizados pelos profissionais no desenvolvimento desses projetos. A partir de 31
questionários respondidos, foi possível determinar que 20,88% dos profissionais utilizam
alguma ferramenta computacional para desenvolver os projetos. Também foi possível
descobrir algumas características desses profissionais como curso e ano de formação, quais
as regiões que estão inseridos, que tipo de projetos desenvolvem e se já desenvolveram
projetos baseados na nova norma.
|
56 |
Refined damped equivalent fluid models for acoustics / Modèles fluide équivalent amortis pour l'acoustiqueSambuc, Clément 08 January 2015 (has links)
The acoustics of small cavities raises interest of the scientific community since it involves particular damping mechanisms. In fluid dynamics, when a small perturbation is propagating within a Newtonian and heat-conducting fluid bounded by a rigid and isothermal surface, viscous and thermal dissipative mechanisms are generated near the walls. Such effects can have significant impact on the acoustic behaviour of the system.<p>Several types of practical applications can be cited, among which: hearing aids, micro-electro-mechanical systems (transducers, microphones and loud-speakers), absorbing materials made of thin capillary nets or small pores, dissipative silencers, thermo-acoustic heat exchangers, or any kind of device bringing into play small resonant cavities filled with a dissipative fluid (micro-acoustics).<p><p>This study focuses on appropriated reductions of the physical equations, in order to enhance the efficiency of the numerical resolution without adversely affecting the accuracy. Moreover, the proposed strategies lead to numerically stable systems as they involve only one scalar partial order differential equation (or equivalent fluid equation). The emphasis is put on the physical aspect of those reductions, their range of applicability, benefits and drawbacks.<p>Two new reduced models are proposed to estimate the visco-thermal acoustic wave propagation. A first extension deals with waveguide geometries and relax the hypothesis of the fluid at rest. The second original formulation addresses visco-thermal acoustics in 3D arbitrary geometries. This model is based on different considerations coming from existing techniques as well as the estimation of a wall-distance field.<p><p>A second part aims at studying the acoustic behaviour of biphasic materials and more specifically poro-elastic materials. This type of acoustic component is widely used in industry because of their good absorbing properties in the medium- and high-frequency <p>ranges.<p>A preliminary bibliographic research deals with the derivation of the set of partial order differential equations that account for both fluid/structure interactions and the anisotropy of a given poro-elastic material. It has been shown that transversely orientated capillary materials (for instance catalyst substrates) can be simulated using the proposed reduction technique.<p>At last, the modelling of the acoustic transmission between two domains separated by perforated or micro-perforated plates or thin plates of poro-elastic materials is discussed. The analogy between the rigid perforated plate models with an equivalent fluid formulation has been presented. As a result, this model has been extended in order to account for flexural effects of the solid part.<p><p><p>Ce travail porte sur l'étude de certains phénomènes d'amortissements intervenant dans l'acoustique des petites cavités. En méchanique des fluides, lorsqu'une petite perturbation se propage au sein d'un fluide newtonien et caloporteur borné par un mur rigide et isotherme, ces mécanismes dissipatifs particuliers se localisent aux abords des parois et jouent un rôle significatif dans certaines situations.<p>Parmi les exemples d'applications pratiques, il est possible de citer les appareils d'aide auditive, les systèmes microélectromécaniques (transducteurs, microphones et haut-parleurs), les matériaux absorbants constitués de fins réseaux capillaires ou de pores aux dimensions réduites, les systèmes de silencieux, d'échangeurs de chaleur thermo-acoustiques ou tout autre appareil mettant en jeu des cavités résonantes aux dimensions réduites (micro-acoustique).<p><p>L'étude proposée ici se focalise sur des stratégies de réduction appropriées des équations physiques, ceci afin d'améliorer l'efficacité du modèle tout en conservant une précision acceptable. Les techniques présentées aboutissent à des systèmes numériquement stables mettant en jeu une seule équation scalaire (ou équation fluide équivalent). Ainsi, l'accent est porté sur l'aspect physique des réductions, leurs domaines d'application, avantages et inconvénients.<p>Deux modèles originaux sont proposés afin de prédire la propagation acoustique visco-thermique. Une première extension permet d'évaluer la pression acoustique au sein de géométries particulières de type guides d'onde en présence d'un écoulement hydrodynamique. La seconde formulation présentée s'intéresse à l'acoustique dans des domaines 3D arbitraires. Cette méthode se base sur des considérations conjointes de modèles réduits existants ainsi que sur l'estimation d'un champ de distance à la plus proche paroi.<p><p>Dans une seconde partie, nous nous proposons d'étudier le comportement acoustique de matériaux biphasique et plus précisément les matériaux poro-élastiques (très utilisés dans l'industrie en raison de leurs caractéristiques absorbantes dans les domaines des moyennes et hautes fréquences).<p>Une étude bibliographique préliminaire nous a permis d'exprimer l'ensemble des équations aux dérivées <p>partielles modélisant à la fois les interactions fluide/structure et l'anisotropie générale des matériaux. <p>Cette réflexion nous a permis d'aboutir à un modèle de matériau isotrope transverse intéressant, combinant le modèle fluide proposé et la formulation acousto-élastique équivalente. Ainsi la modélisation de structures capillaires orientées (comme les matériaux utilisés dans les catalyseurs automobiles) s'en trouve grandement simplifiée.<p>Enfin, la transmission acoustique intervenant entre deux domaines fluides séparés par une plaque perforée ou micro-perforée ou bien une couche de matériau poreux a été étudiée. L'analogie entre les modèlisations existantes et un modèle générique de fluide équivalent a été mise en évidence. Pour finir, cette formulation a été étendue afin de prendre en compte les effets de flexion de la partie solide. / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished
|
57 |
Updating acoustic models: a constitutive relation error approachDecouvreur, Vincent 31 January 2008 (has links)
In the global framework of improving vibro-acoustic numerical prediction quality together with the need to decrease the number of prototyping stages, this manuscript focuses on achieving greater accuracy for acoustic numerical simulations by making use of a parametric updating technique, which enables tuning the model parameters inside physically meaningful boundaries. The improved model is used for the next prototyping stages, allowing more accurate results within reduced simulation times. The updating technique is based on recent works dealing with the constitutive relation error method (CRE) applied to acoustics. The updating process focuses on improving the acoustic damping matrix related to the absorbing properties of the materials covering the borders of the acoustic domain. / Doctorat en sciences appliquées / info:eu-repo/semantics/nonPublished
|
58 |
Modelagem computacional para simulação de campo acústico de baixa frequência em salas / Computational modeling to simulate sound field of law frequency in roomsIsmael Andrade Pimentel 22 August 2008 (has links)
Fundação Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro / O presente trabalho aborda a modelagem numérica da propagação das ondas sonoras em salas, a partir da avaliação do campo de pressão sonora quadrática na sala. Esta pesquisa apresenta um modelo computacional, baseado na abordagem modal de salas com geometria retangular, que melhora o desempenho do programa de simulação numérica de acústica de salas RAIOS 3 para as baixas frequencias. Inicialmente, foi feita uma análise modal teórica e experimental de uma sala retangular de paredes rígidas e não rígidas, onde se calcula pressão sonora de todos os modos como função da posição e do tempo. Para isso, determinam-se os números de onda e frequência de cada modo, ou seja, os autovalores e as autofrequências. O desempenho do modelo é avaliado a partir dos resultados obtidos com uma sala retangular e validado utilizando dados experimentais do PTB (Physikalisch-Technische Bundesanstalt), Alemanha, na intercomparação denominada Round Robin 3, fase 3. Os principais resultados foram obtidos pelo cálculo dos seguintes parâmetros: tempo de reverberação, (T30), fator de clareza (C80), difinição (D50) e o tempo de decaimento inicial, (EDT). / This article discusses the numerical modeling of the propagation of sound waves in rooms, from the assessment of the field of sound pressure quadratic in the room. This research presents a computational model, based on modal approach of rooms with rectangular geometry, which improves the performance of the program for numerical simulation of acoustics of rooms RAIOS 3 for low frequencies. Initially, there was a theoretical and experimental modal analysis of a rectangular room for non-rigid and rigid walls, where an estimated sound pressure of all modes as a function of place and time. For this, is determining of the wavenumbers and frequencies of each mode, namely the eigenvalues and
eigenfrequencies. The performance of the model is assessed from results with a rec tangular room and validated using measurement data of the PTB (Physikalisch-Technische Bundesanstalt), Germany, an inter-comparison named Round Robin 3, phase - 3. The main results were obtained by calculating the following parameters: reverberation time, (T30), clarity factor, (C80), difinition, (D50) and early decay time.
|
59 |
Modelagem computacional para simulação de campo acústico de baixa frequência em salas / Computational modeling to simulate sound field of law frequency in roomsIsmael Andrade Pimentel 22 August 2008 (has links)
Fundação Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro / O presente trabalho aborda a modelagem numérica da propagação das ondas sonoras em salas, a partir da avaliação do campo de pressão sonora quadrática na sala. Esta pesquisa apresenta um modelo computacional, baseado na abordagem modal de salas com geometria retangular, que melhora o desempenho do programa de simulação numérica de acústica de salas RAIOS 3 para as baixas frequencias. Inicialmente, foi feita uma análise modal teórica e experimental de uma sala retangular de paredes rígidas e não rígidas, onde se calcula pressão sonora de todos os modos como função da posição e do tempo. Para isso, determinam-se os números de onda e frequência de cada modo, ou seja, os autovalores e as autofrequências. O desempenho do modelo é avaliado a partir dos resultados obtidos com uma sala retangular e validado utilizando dados experimentais do PTB (Physikalisch-Technische Bundesanstalt), Alemanha, na intercomparação denominada Round Robin 3, fase 3. Os principais resultados foram obtidos pelo cálculo dos seguintes parâmetros: tempo de reverberação, (T30), fator de clareza (C80), difinição (D50) e o tempo de decaimento inicial, (EDT). / This article discusses the numerical modeling of the propagation of sound waves in rooms, from the assessment of the field of sound pressure quadratic in the room. This research presents a computational model, based on modal approach of rooms with rectangular geometry, which improves the performance of the program for numerical simulation of acoustics of rooms RAIOS 3 for low frequencies. Initially, there was a theoretical and experimental modal analysis of a rectangular room for non-rigid and rigid walls, where an estimated sound pressure of all modes as a function of place and time. For this, is determining of the wavenumbers and frequencies of each mode, namely the eigenvalues and
eigenfrequencies. The performance of the model is assessed from results with a rec tangular room and validated using measurement data of the PTB (Physikalisch-Technische Bundesanstalt), Germany, an inter-comparison named Round Robin 3, phase - 3. The main results were obtained by calculating the following parameters: reverberation time, (T30), clarity factor, (C80), difinition, (D50) and early decay time.
|
60 |
A new mapped infinite partition of unity method for convected acoustical radiation in infinite domainsMertens, Tanguy 23 January 2009 (has links)
Résumé:<p><p>Cette dissertation s’intéresse aux méthodes numériques dans le domaine de l’acoustique. Les propriétés acoustiques d’un produit sont devenues une part intégrante de la conception. En effet, de nos jours le bruit est perçu comme une nuisance par le consommateur et constitue un critère de vente. Il y a de plus des normes à respecter. Les méthodes numériques permettent de prédire la propagation sonore et constitue dès lors un outil de conception incontournable pour réduire le temps et les coûts de développement d’un produit.<p><p>Cette dissertation considère la propagation d’ondes acoustiques dans le domaine fréquentiel en tenant compte de la présence d’un écoulement. Nous pouvons citer comme application industrielle, le rayonnement d’une nacelle de réacteur d’avion. Le but de la thèse est de proposer une nouvelle méthode et démontrer ses performances par rapport aux méthodes actuellement utilisées (i.e. la méthode des éléments finis).<p><p>L’originalité du travail consiste à étendre la méthode de partition de l’unité polynomiale dans le cadre de la propagation acoustique convectée, pour des domaines extérieurs. La simulation acoustique dans des domaines de dimensions infinies est réalisée dans ce travail à l’aide d’un couplage entre éléments finis et éléments infinis.<p><p>La dissertation présente la formulation de la méthode pour des applications axisymétriques et tridimensionnelles et vérifie la méthode en comparant les résultats numériques obtenus avec des solutions analytiques pour des applications académiques (i.e. propagation dans un conduit, rayonnement d’un multipole, bruit émis par la vibration d’un piston rigide, etc.). Les performances de la méthode sont ensuite analysées. Des courbes de convergences illustrent à une fréquence donnée, la précision de la méthode en fonction du nombre d’inconnues. Tandis que des courbes de performances présentent le temps de calcul nécessaire pour obtenir une solution d’une précision donnée en fonction de la fréquence d’excitation. Ces études de performances montrent l’intérêt de la méthode présentée.<p><p>Le rayonnement d’un réacteur d’avion a été abordé dans le but de vérifier la méthode sur une application de type industriel. Les résultats illustrent la propagation pour une nacelle axisymétrique en tenant compte de l’écoulement et la présence de matériau absorbant dans la nacelle et compare les résultats obtenus avec la méthode proposée et ceux obtenus avec la méthode des éléments finis.<p><p>Les performances de la méthode de la partition de l’unité dans le cadre de la propagation convectée en domaines infinis sont présentées pour des applications académiques et de type industriel. Le travail effectué illustre l’intérêt d’utiliser des fonctions polynomiales d’ordre élevé ainsi que les avantages à enrichir l’approximation localement afin d’améliorer la solution sans devoir créer un maillage plus fin.<p><p><p>Summary:<p><p>Environmental considerations are important in the design of many engineering systems and components. In particular, the environmental impact of noise is important over a very broad range of engineering applications and is increasingly perceived and regulated as an issue of occupational safety or health, or more simply as a public nuisance. The acoustic quality is then considered as a criterion in the product design process. Numerical prediction techniques allow to simulate vibro-acoustic responses. The use of such techniques reduces the development time and cost.<p><p>This dissertation focuses on acoustic convected radiation in outer domains such as it is the case for turbofan radiation. In the current thesis the mapped infinite partition of unity method is implemented within a coupled finite and infinite element model. This method allows to enrich the approximation with polynomial functions. <p><p>We present axisymmetric and three-dimensional formulations, verify and analyse the performance of the method. The verification compares computed results with the proposed method and analytical solutions for academic applications (i.e. duct propagation, multipole radiation, noise radiated by a vibrating rigid piston, etc.) .Performance analyses are performed with convergence curves plotting, for a given frequency, the accuracy of the computed solution with respect to the number of degrees of freedom or with performance curves, plotting the CPU time required to solve the application within a given accuracy, with respect to the excitation frequency. These performance analyses illustrate the interest of the mapped infinite partition of unity method.<p><p>We compute the radiation of an axisymmetric turbofan (convected radiation and acoustic treatments). The aim is to verify the method on an industrial application. We illustrate the radiation and compare the mapped infinite partition of unity results with finite element computations.<p><p>The dissertation presents the mapped partition of unity method as a computationally efficient method and illustrates its performances for academic as well as industrial applications. We suggest to use the method with high order polynomials and take the advantage of the method which allows to locally enrich the approximation. This last point improves the accuracy of the solution and prevent from creating a finer mesh.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished
|
Page generated in 0.0818 seconds