Within the exciting current trend to explore novel low-dimensional systems, the possibility to inject pure spin currents in graphene and other two-dimensional crystals has attracted considerable attention in the past few years. The theoretical prediction of large spin relaxation times and experimentally observed mesoscopic-scale spin diffusion lengths places graphene as a promising base system for future spintronics devices. This is due to the unique characteristics intrinsic to the two-dimensional lattice of carbon atoms forming graphene, such as the lack of nuclear spins and weak spin-orbit coupling of the charge carriers. Interestingly for some spintronic applications, the latter can be chemically and physically engineered, with large induced spin-orbit couplings found in functionalized graphene sheets. Understanding spin injection, spin current and spin dynamics in graphene is of a great interest, both from the fundamental and applied points of view. This thesis presents an experimental study of dynamical generation of spin currents in macroscopic graphene sheets by means of spin pumping from the precessing magnetization of an adjacent ferromagnet. The spin pumping characteristics are studied by means of ferromagnetic resonance (FMR) measurements in Permalloy/graphene (Py/Gr) bilayers. Changes in the FMR linewidth induced by the presence of graphene (when compared to studies with only Py films) correspond to an increase in the Gilbert damping in the ferromagnetic layer (proportional to the FMR linewidth) and interpreted as a consequence of spin pumping at the Py/Gr interface driven by the Py magnetization dynamics (i.e., magnetic induced by the microwave stimulus). FMR experiments are performed on different FM/Gr interfaces, completing a set of studies designed to systematically identify and eliminate damping enhancement arising from processes other than spin pumping. Remarkably, a substantial enhancement of the Gilbert damping observed in Py/Gr strips with graphene protruding a few micrometers from the strip sides is univocally associated to spin pumping at the quasi-onedimensional interface between the Py strip edges and graphene. This increase in the FMR linewidth compares with observations in other bilayer systems, in where thick (thicker than the spin diffusion length) layers of heavy metals with strong spin-orbit coupling are employed as the non-magnetic layer, indicating that spin relaxation in chemically grown graphene must be greatly enhanced in order to account for the losses of angular momentum lost by the ferromagnet. The fundamental implications of the results presented in this thesis point to a non-trivial nature of the spin pumping mechanism owing to the two-dimensionality of the non-magnetic layer (i.e., graphene). In addition, a spintronics device designed to interconvert charge and spin currents has been designed. A high-frequency microwave irradiation lock-in modulation technique is employed to detect the small electrical voltages generated by the inverse spin Hall effect (ISHE). As a proof of principle, a successful spin-charge interconversion in Py/Pt-based devices is experimentally demonstrated in this thesis. The challenges associated with the spin-charge interconversion in twodimensional devices are discussed and systematically addressed, and a potential device geometry for measuring the ISHE in Py/Gr-based systems is provided.

付記する学位プログラム名: 京都大学卓越大学院プログラム「先端光・電子デバイス創成学」 / 京都大学 / 新制・課程博士 / 博士(工学) / 甲第24891号 / 工博第5171号 / 新制||工||1987(附属図書館) / 京都大学大学院工学研究科電子工学専攻 / (主査)教授 白石 誠司, 准教授 掛谷 一弘, 教授 小野 輝男, 教授 森山 貴広 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

No description available.

付記する学位プログラム名: 京都大学卓越大学院プログラム「先端光・電子デバイス創成学」 / 京都大学 / 新制・課程博士 / 博士(工学) / 甲第25294号 / 工博第5253号 / 京都大学大学院工学研究科電子工学専攻 / (主査)教授 白石 誠司, 准教授 掛谷 一弘, 教授 柳瀬 陽一 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DFAM

Este trabalho apresenta as propriedades de transporte eletrônico de isolantes topológicos bidimensionais (TI) baseados em poços quânticos de HgTe/CdTe. Estas heteroestruturas, no regime de bandas invertido, contem um novo estado conhecido como isolante de spin Hall quântico (QSHI). Este estado apresenta um comportamento de isolante no corpo (bulk), mas exibe estados condutores sem lacunas nas bordas (edges), as quais podem ser verificadas em medidas de transporte. Medidas de resistência de quatro terminais foram observadas perto do valor quantizado em amostras mesoscópicas. No entanto, para amostras com mais de um m, a resistência pode ser muito maiores que h/2e2 devido à presença de defasagem de spin, não homogeneidade ou desordem na amostra. Esta tese aborda o problema da resistência não quantizado observada em amostras macroscópicas de dimensões maiores a algum mícron. Nós relatamos observação e investigação sistemática de transporte local e não local em poços quânticos de HgTe (8.0-8.3 nm) com estrutura de banda invertida correspondente à fase de isolante de spin Hall quântico. O dispositivo MCT1 consiste de três segmentos consecutivos de largura 4 m e de comprimentos diferentes (2 m, 8 m, 32 m), e sete sondas de tensão. O dispositivo MCT2 foi fabricado com um comprimento litográfico de 6 m e largura 5 m. Ambos dispositivos estão equipados com uma porta superior (top gate), que permite ajustar a densidade de portadores do dispositivo. A aplicação de uma tensão de porta muda a densidade de portadores, transformando a condutividade do poço quântico de tipo n para tipo p através de uma fase intermediária chamada de ponto a neutralidade de carga (CNP). Picos acentuados não universais (R >> h/2e2) em ambas as resistividades, local e não local, foram observados próximos ao CNP os quais diminuem rapidamente a medida que se afasta do CNP. Tal comportamento próximo ao CNP pode ser explicado usando o modelo de transporte de bordas (edge) e corpo (bulk), que inclui tanto os estados de borda como o corpo para a contribuição à corrente. O desvio dos valores da resistência de quarto terminais do valor quantizado (R >> h/2e2) em amostras macroscópicas com dimensões acima de algum mícron é um dos principais problemas no campo dos isolantes topológicos. Recentemente foi proposto um modelo por Vayrynen et al., onde tem sido considerado a influência de poças de carga, resultantes de distribuições de carga não homogêneas em isolantes topológicos 2d, na condutância de estados de borda helicoidal. Os estados de borda são acoplados por tunelamento a essas poças metálicas ou pontos quânticos. A permanência dos elétrons em pontos quânticos pode levar a um retroespalhamento inelástico significativo dentro da borda e modifica o transporte balístico. Portanto transporte balístico coerente é esperado somente na região entre poças, e o total de resistência de quatro terminais excede o valor quantizado. Introduzindo as interações elétron-elétron em sistemas de uma dimensão resulta em um liquido de Luttinger (LL). Os estados de borda helicoidais em isolantes topológicos 2d, podem ser tratados como um líquido de Luttinger ideal, uma vez que, naturalmente, aparecem em poços quânticos de HgTe. Entre as várias assinaturas específicas do comportamento do LL, como a dependência da temperatura, é importante se concentrar nas propriedades de não equilíbrio do LL. Em contraste com os líquidos de Fermi convencionais, nenhum estado excitado decairá ao estado de equilíbrio, caracterizado pela temperatura, na ausência de desordem. Medidas de elétron-aquecimento podem ser usadas para entender a física que governa os processos de relaxamento em LL. Nós temos realizado medidas de transporte não linear no CNP em isolantes topológicos 2d de HgTe. Este método, juntamente com a dependência da resistência com a temperatura, pode ser utilizado para determinar o mecanismo de relaxação da energia dos estados de borda helicoidais em QSHI. Nosso experimento falhou em confirmar as assinaturas especificas do comportamento do líquido de Luttinger. No entanto, o efeito de aquecimento de elétron pode ser descrito pelo mecanismo convencional de relaxamento de energia, esperado para espalhamento elétron-fônon. / This thesis present electronic transport properties of two-dimensional topological insulators (TI) based on HgTe/CdTe quantum wells. These heterostructures, in the band inverted regime, hosts a novel state known as the quantum spin Hall insulator. This state is identified as insulator in the bulk, but exhibits gapless conducting states at their edges which can be verified in transport experiments. Four-terminal resistance close to the quantized value has been observed in mesoscopic samples. However, for samples longer than 1 m, the resistance might be much higher than h/2e2 due to the presence of spin dephasing, inhomogeneity or disorder in the sample. This thesis address the problem of non-quantized resistance observed in macroscopic samples of dimensions longer than few microns. We report on the observation and a systematic investigation of local and nonlocal transport in HgTe quantum wells (8.0-8.3 nm) with inverted band structure corresponding to the quantum spin Hall insulating (QSHI) phase. The device MCT1 consists of three 4 m wide consecutive segments of different length (2 m, 8 m, 32 m), and seven voltage probes. The device MCT2 was fabricated with a lithographic length 6 m and width 5 m. Both devices are equipped with a top gate which allows tuning the carrier density of the device. Applying gate bias changes the carrier density transforming the quantum well conductivity from n-type to p-type via an intermediate phase, called the charge neutrality point (CNP). Non-universal (R >> h/2e2) peaks in both local and nonlocal resistivity were observed near the CNP which decreases rapidly going away from CNP. Such a behavior near CNP can be explained using the edge plus bulk transport model, which includes both the edge states and bulk contribution to the total current. Deviation of the four-terminal resistance from quantization (R >> h/2e2) in macroscopic samples, with dimensions above a few microns, is one of the major issue in the field of topological insulators. Recently a model was proposed by Vayrynen et al., where influence of charge puddles, resulting from inhomogeneous charge distribution in 2d topological insulators, on its helical edge conductance has been considered. The edge states are tunnel coupled to these metallic puddles or quantum dots. Electron´s dwelling in the quantum dot may lead to significant inelastic backscattering within the edge and modifies the ballistic transport. Therefore ballistic coherent transport is expected only in the region between the puddles, and the total four-terminal resistance exceeds the quantized value. Introducing electron-electron interactions in one-dimensional systems results in a Luttinger liquid (LL). The helical edge states in 2d topological insulator, can be treated as ideal Luttinger liquid, since it naturally appears in HgTe quantum wells. Among the various specific signatures of the LL behavior, such as temperature dependence, it is important to focus on non-equilibrium properties of LL. In contrast to conventional Fermi liquids, none of the excited state will decay to equilibrium state, characterized by temperature, in the absence of disorder. Electron-heating measurements can be used to understand the physics governing relaxation processes in LL. We have performed non-linear transport measurements at the CNP in HgTe based 2d topological insulators. This method together with temperature dependence of resistance can be used to determine the energy relaxation mechanism of the helical edge modes in QSHI. Our experiments fail to confirm the specific signatures of Luttinger liquid behavior. However, electron heating effect can be described by conventional energy relaxation mechanism, expected for electron-phonon interactions.

Este trabalho apresenta as propriedades de transporte eletrônico de isolantes topológicos bidimensionais (TI) baseados em poços quânticos de HgTe/CdTe. Estas heteroestruturas, no regime de bandas invertido, contem um novo estado conhecido como isolante de spin Hall quântico (QSHI). Este estado apresenta um comportamento de isolante no corpo (bulk), mas exibe estados condutores sem lacunas nas bordas (edges), as quais podem ser verificadas em medidas de transporte. Medidas de resistência de quatro terminais foram observadas perto do valor quantizado em amostras mesoscópicas. No entanto, para amostras com mais de um m, a resistência pode ser muito maiores que h/2e2 devido à presença de defasagem de spin, não homogeneidade ou desordem na amostra. Esta tese aborda o problema da resistência não quantizado observada em amostras macroscópicas de dimensões maiores a algum mícron. Nós relatamos observação e investigação sistemática de transporte local e não local em poços quânticos de HgTe (8.0-8.3 nm) com estrutura de banda invertida correspondente à fase de isolante de spin Hall quântico. O dispositivo MCT1 consiste de três segmentos consecutivos de largura 4 m e de comprimentos diferentes (2 m, 8 m, 32 m), e sete sondas de tensão. O dispositivo MCT2 foi fabricado com um comprimento litográfico de 6 m e largura 5 m. Ambos dispositivos estão equipados com uma porta superior (top gate), que permite ajustar a densidade de portadores do dispositivo. A aplicação de uma tensão de porta muda a densidade de portadores, transformando a condutividade do poço quântico de tipo n para tipo p através de uma fase intermediária chamada de ponto a neutralidade de carga (CNP). Picos acentuados não universais (R >> h/2e2) em ambas as resistividades, local e não local, foram observados próximos ao CNP os quais diminuem rapidamente a medida que se afasta do CNP. Tal comportamento próximo ao CNP pode ser explicado usando o modelo de transporte de bordas (edge) e corpo (bulk), que inclui tanto os estados de borda como o corpo para a contribuição à corrente. O desvio dos valores da resistência de quarto terminais do valor quantizado (R >> h/2e2) em amostras macroscópicas com dimensões acima de algum mícron é um dos principais problemas no campo dos isolantes topológicos. Recentemente foi proposto um modelo por Vayrynen et al., onde tem sido considerado a influência de poças de carga, resultantes de distribuições de carga não homogêneas em isolantes topológicos 2d, na condutância de estados de borda helicoidal. Os estados de borda são acoplados por tunelamento a essas poças metálicas ou pontos quânticos. A permanência dos elétrons em pontos quânticos pode levar a um retroespalhamento inelástico significativo dentro da borda e modifica o transporte balístico. Portanto transporte balístico coerente é esperado somente na região entre poças, e o total de resistência de quatro terminais excede o valor quantizado. Introduzindo as interações elétron-elétron em sistemas de uma dimensão resulta em um liquido de Luttinger (LL). Os estados de borda helicoidais em isolantes topológicos 2d, podem ser tratados como um líquido de Luttinger ideal, uma vez que, naturalmente, aparecem em poços quânticos de HgTe. Entre as várias assinaturas específicas do comportamento do LL, como a dependência da temperatura, é importante se concentrar nas propriedades de não equilíbrio do LL. Em contraste com os líquidos de Fermi convencionais, nenhum estado excitado decairá ao estado de equilíbrio, caracterizado pela temperatura, na ausência de desordem. Medidas de elétron-aquecimento podem ser usadas para entender a física que governa os processos de relaxamento em LL. Nós temos realizado medidas de transporte não linear no CNP em isolantes topológicos 2d de HgTe. Este método, juntamente com a dependência da resistência com a temperatura, pode ser utilizado para determinar o mecanismo de relaxação da energia dos estados de borda helicoidais em QSHI. Nosso experimento falhou em confirmar as assinaturas especificas do comportamento do líquido de Luttinger. No entanto, o efeito de aquecimento de elétron pode ser descrito pelo mecanismo convencional de relaxamento de energia, esperado para espalhamento elétron-fônon. / This thesis present electronic transport properties of two-dimensional topological insulators (TI) based on HgTe/CdTe quantum wells. These heterostructures, in the band inverted regime, hosts a novel state known as the quantum spin Hall insulator. This state is identified as insulator in the bulk, but exhibits gapless conducting states at their edges which can be verified in transport experiments. Four-terminal resistance close to the quantized value has been observed in mesoscopic samples. However, for samples longer than 1 m, the resistance might be much higher than h/2e2 due to the presence of spin dephasing, inhomogeneity or disorder in the sample. This thesis address the problem of non-quantized resistance observed in macroscopic samples of dimensions longer than few microns. We report on the observation and a systematic investigation of local and nonlocal transport in HgTe quantum wells (8.0-8.3 nm) with inverted band structure corresponding to the quantum spin Hall insulating (QSHI) phase. The device MCT1 consists of three 4 m wide consecutive segments of different length (2 m, 8 m, 32 m), and seven voltage probes. The device MCT2 was fabricated with a lithographic length 6 m and width 5 m. Both devices are equipped with a top gate which allows tuning the carrier density of the device. Applying gate bias changes the carrier density transforming the quantum well conductivity from n-type to p-type via an intermediate phase, called the charge neutrality point (CNP). Non-universal (R >> h/2e2) peaks in both local and nonlocal resistivity were observed near the CNP which decreases rapidly going away from CNP. Such a behavior near CNP can be explained using the edge plus bulk transport model, which includes both the edge states and bulk contribution to the total current. Deviation of the four-terminal resistance from quantization (R >> h/2e2) in macroscopic samples, with dimensions above a few microns, is one of the major issue in the field of topological insulators. Recently a model was proposed by Vayrynen et al., where influence of charge puddles, resulting from inhomogeneous charge distribution in 2d topological insulators, on its helical edge conductance has been considered. The edge states are tunnel coupled to these metallic puddles or quantum dots. Electron´s dwelling in the quantum dot may lead to significant inelastic backscattering within the edge and modifies the ballistic transport. Therefore ballistic coherent transport is expected only in the region between the puddles, and the total four-terminal resistance exceeds the quantized value. Introducing electron-electron interactions in one-dimensional systems results in a Luttinger liquid (LL). The helical edge states in 2d topological insulator, can be treated as ideal Luttinger liquid, since it naturally appears in HgTe quantum wells. Among the various specific signatures of the LL behavior, such as temperature dependence, it is important to focus on non-equilibrium properties of LL. In contrast to conventional Fermi liquids, none of the excited state will decay to equilibrium state, characterized by temperature, in the absence of disorder. Electron-heating measurements can be used to understand the physics governing relaxation processes in LL. We have performed non-linear transport measurements at the CNP in HgTe based 2d topological insulators. This method together with temperature dependence of resistance can be used to determine the energy relaxation mechanism of the helical edge modes in QSHI. Our experiments fail to confirm the specific signatures of Luttinger liquid behavior. However, electron heating effect can be described by conventional energy relaxation mechanism, expected for electron-phonon interactions.

This thesis experimentally demonstrates four approaches of frequency control of magnetic auto-oscillations in spin Hall nano-oscillators (SHNOs). The frequency can be changed in the GHZ-range by external magnetic fields as shown in this work. This approach uses large electromagnets, which is inconvenient for future applications. The nonlinear coupling between oscillator power and frequency can be used to control the latter one by changing the applied direct current to the SHNO. The frequency can be controlled over a range of several 100 MHz as demonstrated in this thesis. The first part of the experimental chapter demonstrates the synchronization (injection-locking) between magnetic auto-oscillations and an external microwave excitation. The additionally applied microwave current generates a modulation of the effective magnetic field, which causes the interaction with the auto-oscillation. Both synchronize over a range of several 100 MHz. In this range, the auto-oscillation frequency can be controlled by the external stimulus. An increase of power and a decrease of line width is achieved in the synchronization range. This is explained by the increased coherence of the auto-oscillations. A second approach is the synchronization of auto-oscillations to an alternating magnetic field. This field is generated by a freestanding antenna, which is positioned above the SHNO. The second part of the experimental chapter introduces a bipolar concept of SHNOs and its experimental demonstration. In contrast to conventional SHNOs, bipolar SHNOs generate auto-oscillations for both direct current polarities and both directions of the external magnetic field. This is achieved by combining two ferromagnetic layers in an SHNO. The combination of two different ferromagnetic materials is used to switch between two frequency ranges in dependence of the direct current polarity since it defines the layer showing auto-oscillations. This approach can be used to change the frequency in the GHz-range by switching the direct current polarity. / Diese Arbeit demonstriert experimentell vier verschiedene Methoden der Frequenzkontrolle magnetischer Auto-Oszillationen in Spin Hall Nano-Oszillatoren (SHNOs). Durch externe magnetische Felder kann die Frequenz im GHz-Bereich geändert werden, wie es in dieser Arbeit gezeigt wird. Dies erfordert jedoch große Elektromagneten, deren Nutzung für zukünftige Anwendungen der SHNOs nicht geeignet sind. Aufgrund der nichtlinearen Kopplung zwischen Oszillatorleistung und Oszillatorfrequenz, lässt sich letztere durch den Versorgungsstrom beeinflussen. Dies ist typischerweise in einem Bereich von mehreren 100 MHz möglich, wie es an mehreren Stellen dieser Arbeit gezeigt wird. Im ersten Abschnitt des Ergebnisteils wird die Synchronisation der magnetischen Auto-Oszillationen zu einer externen Mikrowellenanregung demonstriert. Der zusätzlich eingespeiste Mikrowellenstrom erzeugt eine Modulation des effektiven Magnetfelds, was zur Wechselwirkung mit den Auto-Oszillationen führt. Diese synchronisieren über eine Frequenzdifferenz von mehreren 100 MHz. In diesem Bereich lässt sich die Frequenz der Auto-Oszillation mit der äußeren Frequenz steuern. Innerhalb des Synchronisationsbereichs wird außerdem eine Erhöhung der Leistung und eine Verringerung der Linienbreite der Auto-Oszillationen festgestellt. Dies wird mit einer Erhöhung der Kohärenz der Auto-Oszillationen erklärt. Neben der zusätzlichen Einspeisung eines Mikrowellenstroms können die Auto-Oszillationen auch zu einem magnetischen Wechselfeld synchronisieren, welches von einer frei beweglichen Antenne erzeugt wird, die über dem SHNO positioniert wird. Im zweiten Abschnitt des Ergebnisteils wird ein bipolares Konzept eines SHNO vorgestellt und seine Funktionsfähigkeit experimentell nachgewiesen. Im Vergleich zu konventionellen SHNOs erzeugen bipolare SHNOs Auto-Oszillationen für beide Polaritäten des elektrischen Versorgungsstroms und beide Richtungen des externen Magnetfelds. Dies wird durch die Kombination zweier ferromagnetischer Lagen in einem SHNO erreicht. Die Kombination unterschiedlicher ferromagnetischer Materialien kann genutzt werden, um die Mikrowellenfrequenz in Abhängigkeit der Stromrichtung zu ändern, da diese bestimmt in welcher Lage die Auto-Oszillationen erzeugt werden können. Durch eine geeignete Materialkombination kann die Frequenz im GHz-Bereich geändert werden, wenn die Strompolarität umgekehrt wird.

Spintronics is an attractive field that combines magnetism and electronics to realize new devices. Spin based oscillators (SBOs) have gained significant interest in recent years due to their attractive characteristics, including high operating frequency, low power, small area and integration compatibility with CMOS circuitry. SBOs have shown potential in the fields of wireless communication systems, magnetic field sensing and neuromorphic computing. A relatively new and promising SBO architecture is the three-terminal Spin Hall Nano Oscillator (SHNO). To accelerate the design of next generation spintronic devices, co-design and simulation of three-terminal SHNOs with CMOS technology are of great importance. To realize this, a comprehensive analytical model is needed. In this thesis, an extensive survey of SBO theory is performed and a set of compact equations are proposed to describe the SBO characteristics. From these equations a compact model is realized in Verilog-A and verified against experimental measurements. The model shows good agreement with experimental results and opens up the possibility of designing CMOS circuits for three-terminal SHNOs. / Spintronics kombinerar magnetism och elektronik med syftet att utveckla nya komponenter. Spin baserade oscillatorer (SBO) har fått ökad intresse de senaste åren på grund av deras attraktiva egenskaper, inklusive hög frekvens, låg kraft, liten yta och integrations kompatibilitet med CMOS-kretsar. SBO har visat potential i kommunikationssystem, avkänning av magnetfält och neuromorfisk databehandling. En ny och förhoppningsfull SBO-arkitektur är den tre-terminala Spin Hall Nano Oscillator (SHNO). För att påskynda design av nästa generations spintronic-komponenter är co-design och simulering av tre-terminala SHNOs med CMOS-teknik av en stor betydelse. En modell krävs för att göra detta. I denna avhandling utförs en omfattande undersökning av SBO teori samt ekvationer för beskrivning av SBO egenskaper är föreslagen. Från dessa ekvationer är en kompakt modell i Verilog-A utvecklad och verifieras mot experimentella mätningar. Modellen visar god överensstämmelse med experimentella resultat och öppnar möjligheten att designa CMOS-kretsar för tre-terminal SHNOs.

Spintronics, an abbreviation of spin based electronics and also known as magneto electronics, has attracted a lot of interest in recent years. It aims to explore the role of electrons’ spins in building next generation electric devices. Using electrons’ spins rather than electrons’ charges may allow faster, lower energy cost devices. Spin Hall Effect is an important subfield of spintronics. It studies spin current, spin transport, and spin accumulation in paramagnetic systems. It can further understanding of quantum physics, device physics, and may also provide insights for spin injection, spin detection and spin manipulation in the design of the next generation spintronics devices. In this experimental work, two sets of experiments were prepared to detect the Spin Hall Effect in metallic systems. The first set of experiments aims to extract Spin Hall Effect from Double Hall Effect in micrometer size metal thin film patterns. Our experiments proved that the Spin Hall Effect signal was much smaller than the theoretically calculated value due to higher electrical resistivity in evaporated thin films. The second set of experiments employs a multi-step process. It combines micro fabrication and electrochemical method to fabricate a perpendicular ferromagnet rod as a spin injector. Process description and various techniques to improve the measurement sensitivity are presented. Measurement results in aluminum, gold and copper are presented in Chapters III, IV and V. Some new experiments are suggested in Chapters V and VI.

No description available.