The aim of this master´s thesis was design of rehabilitation of selected parts of the sewer network in Valašské Meziříčí. The work is divided into several parts. The first part is a description of the preliminary research based on appointments with the operator of the sewer network. The second section describes the basic information on the assessment of the sewer network. In the third part, the evaluation of technical and operational conditions according to ČSN EN 13 508. This section was supplemented by creation of supportive software program in Microsoft Office Excel, which is based on the proposed TNV 756905. In the next part the environmental assessment was performed digging and trenchless technology and then selected a possibility representative to design of selected parts. The fifth and sixth section contains technical and economic evaluation designed technology. A final section deals with the choosing optimal rehabilitation technologies for the design of selected parts of the sewer network.

Master´s thesis deals with the design and assessment of the roof construction of the multi-purpose hall in Holice. The other two dimensions of the hall are 28 x 45 m. Height of the hall is 11,28 m. Roofing is done in three variants. The final solution is processed for one presentation. The main supporting element is formed by cross-linking arc beam made of laminated wood. Girders are spaced 5 m and connected purlins. Stability of the construction by three field bracings. The cladding is a rafter, shuttering of OSB particle that carry the roof deck.

The project deals with the lower part of the construction of a residential building. The parking spaces are situated in three underground floors. The five floors occur in the over-ground part of the building. The building is based on the secant walls of Milan around the perimeter. Internal walls and columns are supported with micropiles. In this project are designed base plate, external walls and stairs. Static system and the calculation of the internal forces was carried out in Scia Engineer 2012 Student version.

The project deals the part of the structure of multifunctional building . It is a multi-storey building. In this project are designed slab, basement wall, continous footing, column and footing . Static system and the calculations of the internal forces was conducted in a student version of Scia Engineer 2012.

The thesis is a design of a bridge crossing the valley of the Hrabyňka creek as a part of road I/II. Firstly, three possible structures are designed and according to their advantages and disadvantages, the best of them is selected. In this case a cable stay bridge was selected. Following is a design of span lenghths, collumn heights and the cross-section. Then the loads are detremined and applied on a numeric model cretaed in software working on the basis of FEM. In continuation internal forces are calculated and their propriate combinations for service limit stay and ultimate limit state with time dependent analysis taken into account. In the end the reinforcement steel is designed for one part of the structure. Detailed drawings are also part of the thesis.

This thesis addresses the repair and reinforcement of ceiling construction disturbed by excessive deflection. The aim is to design a gain ceiling structures suitable method. The proposal includes a calculation of prestressing losses. Calculation of internal forces was carried out using a computer program RFEM. The assessment was carried out according to limit states.

The topic of this thesis is a safe and economical design of a bearing bridge structure with a variable cross-section according to all valid regulations and standards. The structure is reviewed by limit states. The solution includes time-dependent analysis of the structure with the influence of progressive construction.

The thesis deals with the design and assessment of monolithic reinforced concrete structures tanks and wastewater treatment plants in accordance with applicable standards and drafting drawings. The tank is divided into individual solved parts: base plate, walls and ceiling plate. These parts are designed according to the ultimate limit states and serviceability. Resolves an assessment of the foundation structure according to the second geotechnical categories.

The master thesis ´´Storage hall” deals with designing of selected elements prefabrikated skeleton hall. Discussed elements are truss, beam, girder, column and prefabricate footing. Within above mentioned elements was carried out static analysis, design of reinforcement and reinforcement drawings. Analysis of internal forces for columns and prefabricate footing was carried out with usage of the program Scia Engineer, 3D model of the whole object was created. Analysis of internal forces for the rest of elements was carried out with help of manual calculation. Those elements were designed with consideration of ultimate limit state. Serviceability limit state assessment was carried out within the truss.

The topic of the diploma thesis is the design of monolithic concrete structure CERIT in Brno. There are designed three preliminary variants of the concrete structure for the problematic place in the building. Selected variant is developed in detail design (the concrete wall). The solution comprises statical analysis, text section and drawing documentation.