Tradicionalmente no reforço de pilares de concreto armado são empregados materiais já consagrados, como as chapas de aço, o próprio concreto armado, e, mais recentemente, o polímero reforçado com fibras (PRF). Porém existem ainda alguns problemas associados a estes materiais ou, mais especificamente, às técnicas utilizadas para promover o reforço, destacando-se a dificuldade de execução, comportamento frágil e perda de área útil em função do aumento da seção transversal do pilar original. Por outro lado, o desenvolvimento da tecnologia dos materias e a constante inovação tecnológica tem como resultado a oferta de uma grande variedade de materiais com características orientadas à solução de um determinado problema. Cita-se como exemplo o concreto reforçado com fibras de aço, inicialmente desenvolvido para aplicação em elementos submetidos à flexão, mas que apresenta atributos, que se bem explorados, são desejáveis para aplicação no reforço de pilares. Busca-se neste trabalho desenvolver estratégias e técnicas de reforço que busquem potencializar o aproveitamento de todos os atributos oferecidos pelos materiais comumente empregados e desenvolver um concreto reforçado com fibras de aço com diferentes comprimentos que possibilite sua aplicação no reforço de pilares. Os resultados da análise experimental demonstram que a escolha do material, da estratégia e técnica de reforço são fatores decisivos para aliar o melhor aproveitamento dos materiais empregados e o atendimento às exigências de projeto. Conclui-se ainda que a associação de fibras de aço de diferentes comprimentos possibilita a utilização do concreto reforçado com fibras no reforço de pilares de concreto, tendo como grande virtude a facilidade de execução, se comparado com o concreto armado. / Tradicionally the strengthening of reinforced concrete columns uses materials well known, such as steel plates, the reinforced concrete, and, more recently, fiber reinforced polymer (FRP). But there are still some problems associated with these materials, or more specifically, with the used techniques, specially the difficulty of implementation, brittle behavior and loss free space due to the increase of the original cross section of the column. On the other hand, the materials technology development and the constant innovation has resulted in the provision of a wide variety of materials with specifics caracteristics to solving a particular problem. For example, steel fiber reinforced concrete, originally developed for use in elements subject to bending, but it has some attributes, which if are well explored, are desirable for use in strengthening columns. This work presents the development of strategies and techniques that optimize the o use all the attributes offered by the commonly used materials, and develop a different lengths steel fiber reinforced concrete to enable its application on columns strengthening. The results of experimental analysis show that the choice of material, strategy and technique of strengtheningt is a key factor to combine the best use of the materials used and the design requirements. It is also concluded that the combination of steel fibers of different lengths allows the use of steel fibers reinforced concrete on the strengthening of concrete columns, with the great virtue of the ease of implementation, compared to the reinforced concrete.

No description available.

When subjected to a combination of moment and shear force, a reinforced concrete (RC) beam with either little or no transverse reinforcement can fail in shear before reaching its full flexural strength. This type of failure is sudden in nature and usually disastrous because it does not give sufficient warning prior to collapse. To prevent this type of shear failure, reinforced concrete beams are traditionally reinforced with stirrups. However, the use of stirrups is not always cost effective since it increases labor costs, and can make casting concrete difficult in situations where closely-spaced stirrups are required. The use of steel fiber reinforced concrete (SFRC) could be considered as a potential alternative to the use of traditional shear reinforcement. Concrete is very weak and brittle in tension, SFRC transforms this behaviour and improves the diagonal tension capacity of concrete and thus can result in significant enhancements in shear capacity. However, one of the drawbacks associated with SFRC is that the addition of fibers to a regular concrete mix can cause problems in workability. The use of self-consolidating concrete (SCC) is an innovative solution to this problem and can result in improved workability when fibers are added to the mix. The thesis presents the experimental results from tests on twelve slender self-consolidating fiber reinforced concrete (SCFRC) beams tested under four-point loading. The results demonstrate the combined use of SCC and steel fibers can improve the shear resistance of reinforced concrete beams, enhance crack control and can promote flexural ductility. Despite extensive research, there is a lack of accurate and reliable design guidelines for the use of SFRC in beams. This study presents a rational model which can accurately predict the shear resistance of steel fiber reinforced concrete beams. The thesis also proposes a safe and reliable equation which can be used for the shear design of SFRC beams.

Auf der Basis der Bemessungsgrundlagen (DAfStb-Richtlinie „Stahlfaserbeton“, DBV-Merkblatt „Stahlfaserbeton“ und DIN 1045-1) wurden ausgewählte Bauteilversuche mit entsprechenden rechnerischen Überprüfungen der experimentell ermittelten Ergebnisse durchgeführt. Die Untersuchungen konzentrierten sich auf die Ermittlung der Effizienz von ausgewählten Stahlfasern in Betonen mit und ohne Betonstahlbewehrung in durch Biegung ohne Längskraft belasteten Versuchskörpern unter Betrachtung der Grenzzustände der Gebrauchstauglichkeit (GZG) und Tragfähigkeit (GZT). Das Versuchsprogramms umfasste neben der Prüfung ausgewählter Frischbetoneigenschaften die Bestimmung von Festbetonparametern an standardisierten Probekörpern. Des Weiteren wurden 4-Punkt-Biegezugversuche an Balken mit den Abmessungen l/h/b = 70/15/15 cm aus reinem Stahlfaserbeton sowie stahlfaserbewehrtem Stahlbeton, in Anlehnung an das DBV-Merkblatt „Stahlfaserbeton“ und die Richtlinie „Stahlfaserbeton“ vom DAfStb, durchgeführt. Aufbauend auf den Erkenntnissen aus den Materialversuchen im Labormaßstab wurden anschließend Untersuchungen an großformatigen Biegebalken (l/h/b = 420/40/20 cm) durchgeführt. Im Weiteren erfolgten Prüfungen und Auswertungen von Einzelfaserausziehversuchen mit ausgewählten Stahldrahtfasern in Verbindung mit Betonen unterschiedlicher Druckfestigkeit unter Berücksichtigung des Einflusses der Einbindelänge sowie des Einbindewinkels. Im Rahmen des Versuchsprogramms wurden die auf der Grundlage der 4-Punkt-Biegezugversuche ermittelten Ergebnisse analysiert und mit dem derzeit gültigen Bemessungsmodell nach DAfStb-Richtlinie „Stahlfaserbeton“ rechnerisch überprüft. Auf der Basis dieser Ergebnisse erfolgte die Entwicklung eines Ansatzes zur Optimierung der bestehenden Bemessungsansätze. Gegenstand dieser Forschungsarbeit war ebenfalls die Entwicklung eines Fasermodells, mit dem man auf der Grundlage des eingesetzten Fasergehaltes und der Faserart Rückschlüsse auf die Faseranzahl in einer rechteckigen Bruchfläche ziehen kann. Hierbei wurde ein Modell für Rechteckquerschnitte entwickelt, welches es ermöglicht, die durchschnittliche Faseranzahl in einer Bruchfläche, auf der Basis vereinfachter Annahmen, abzuschätzen. Die Verifizierung des Modells erfolgte durch den Vergleich der errechneten Faseranzahl mit zahlreichen experimentellen Versuchsergebnissen. Im letzten Abschnitt dieser Arbeit wurde die Herleitung bzw. Generierung von Bemessungshilfsmitteln zur Biegebemessung von Stahlfaserbeton mit und ohne Betonstahlbewehrung behandelt. Die Ausführungen beziehen sich dabei auf dimensionslose Bemessungstafeln und Interaktionsdiagrammen für Rechteckquerschnitte.

Various anchorage systems including both cast-in-place and post-installed anchors have been developed for fastening both non-structural and structural components to concrete structures. The need for increased flexibility in the design of new structures and strengthening of existing concrete structures has led to increased use of various metallic anchors in practice. Although millions of fasteners are used each year in the construction industry around the world, knowledge of the fastening technology remains poor. In a sustainable society, buildings and structures must, from time to time, be adjusted to meet new demands. Loads on structures must, in general, be increased to comply with new demands, and the structural components and the structural connections must also be upgraded. From the structural connection point of view, the adequacy of the current fastenings for the intended increased load must be determined, and inadequate fastenings must either be replaced or upgraded. The current design models are generally believed to be conservative, although the extent of this behavior is not very clear. To address these issues, the current models must be refined to allow the design of new fastenings and also the assessment of current anchorage systems in practice. The research presented in this thesis consists of numerical and experimental studies of the load-carrying capacity of anchors in concrete structures. Two different types of anchors were studied: (I) cast-in-place headed anchors, and (II) post-installed adhesive anchors. This research focused particularly on the tensile load-carrying capacity of cast-in-place headed anchors and also on the sustained tension loading performance of post-installed adhesive anchors. The overall objective of this research was to provide knowledge for the development of improved methods of designing new fastening systems and assessing the current anchorage systems in practice. For the cast-in-place headed anchors (I), the influence of various parameters including the size of anchor head, thickness of concrete member, amount of orthogonal surface reinforcement, presence of concrete cracks, concrete compressive strength, and addition of steel fibers to concrete were studied. Among these parameters, the influence of the anchor head size, member thickness, surface reinforcement, and cracked concrete was initially evaluated via numerical analysis of headed anchors at various embedment depths. Although these parameters have considerable influence on the anchorage capacity and performance, this influence is not explicitly considered by the current design models. The numerical results showed that the tensile breakout capacity of headed anchors increases with increasing member thickness and/or increasing size of the anchor head or the use of orthogonal surface reinforcement. However, their capacity decreased considerably in cracked concrete. Based on the numerical results, the current theoretical model for the tensile breakout capacity of headed anchors was extended by incorporating several modification factors that take the influence of the investigated parameters into account. In addition, a supplementary experimental study was performed to verify the numerically obtained findings and the proposed refined model. The experimental results corresponded closely to the numerical results, both in terms of failure load and failure pattern, thereby confirming the validity of the proposed model. The validity of the model was further confirmed through experimental results reported in the literature. Additional experiments were performed to determine the influence of the concrete compressive strength and the addition of steel fiber to concrete on the anchorage capacity and performance. These experiments showed that the anchorage capacity and stiffness increase considerably with increasing concrete compressive strength, but the ductility of the anchor decreases. However, the anchorage capacity and ductility increased significantly with the addition of steel fibers to the concrete mixture. The test results also revealed that the tensile breakout capacity of headed anchors in steel fiber-reinforced concrete is significantly underestimated by the current design model. The long-term performance and creep behavior of the post-installed headed anchors (II) was evaluated from the results of long-time tests on adhesive anchors under sustained loads. In this experimental study, adhesive anchors of various sizes were subjected to various sustained load levels for up to 28 years. The anchors were also exposed to several in-service conditions including indoor temperature, variations in the outdoor temperature and humidity, wetness (i.e., water on the surface of concrete), and the presence of salt (setting accelerant) additives in the concrete. Among the tested in-service conditions, variations in the outdoor temperature and humidity had the most adverse effect on the long-term sustained loading performance of the anchors. Based on the test results, recommendations were proposed for maximum sustained load levels under various conditions. The anchors tested under indoor conditions could carry sustained loads of up to 47% of their mean ultimate short-term capacities. However, compared with these anchors, the anchors tested under outdoor conditions exhibited larger creep deformation and failure occurred at sustained loads higher than 23% of their mean ultimate short-term capacities. Salt additives in concrete and wet conditions had negligible influence on the long-term performance of the anchors, although the wet condition resulted in progressive corrosion of the steel. Based on the experimental results, the suitability of the current testing and approval provisions for qualifying adhesive anchors subjected to long-term sustained tensile loads was evaluated. The evaluations revealed that the current approval provisions are not necessarily reliable for qualifying adhesive anchors for long-term sustained loading applications. Recommendations were given for modifying the current provisions to ensure safe long-term performance of adhesive anchors under sustained loads.