This thesis reports the preparation of novel multi-responsive and multiply stimulable triblock copolymers. The resultant polymers were used to coat cotton fabrics and glass to render them amphiphobic. Further, a method was developed for the preparation of poly(ethylene glycol)-block-poly(hydroxyethyl methacrylate) (PEG-b-PHEMA) via anionic polymerization. The multi-responsive copolymer refers to poly(ethylene glycol)-orthonitrobenzyl-poly[2-(perfluorooctyl)ethyl methacrylate)-block-poly(2-cinnamoloxyethyl methacrylate) (PEG-ONB-PFOEMA-b-PCEMA, or P1). P1 was synthesized via atom transfer radical polymerization (ATRP) of FOEMA and a precursory monomer of CEMA using a PEG macroinitiator. The copolymer was multi-responsive or dual light-responsive because the ONB junction cleaves and PCEMA block becomes crosslinked upon UV photolysis. The multiply stimulable copolymers are a series of poly(ethylene glycol)-disulfide-poly[2-(perfluorooctyl)ethyl methacrylate)-block-poly(2-cinnamoloxyethyl methacrylate) (PEG-S2-PFOEMA-b-PCEMA) copolymers. These polymers were synthesized by the end-coupling Py-S2-PFOEMA-b-PHEMA and PEG-SH, and subsequent cinnamation of the PHEMA block. These polymers are multiply stimulable because the S2 junction and PCEMA block respond to different stimulations, such as reducing agents and light, respectively. These synthetic strategies will advance the field of stimuli-responsive polymers by providing novel functional polymers for the generation of durable self-cleaning surfaces. The above polymers form micelles in water or water/organic solvent mixtures because of the water-soluble PEG blocks. Polymer-coated cotton was obtained by immersing cotton in micellar copolymer solutions before subsequent drying and annealing treatment. Upon photolysis, the PEG block was cleaved and the PCEMA anchoring layer became crosslinked. Such a crosslinked and stable layer was rendered amphiphobic because of the exposed PFOEMA block. A similar coating can be obtained from P2. Two types of stimulations including photolysis and reduction treatment need to be applied to yield amphiphobic textiles. This coating strategy is unique and environmentally friendly because the water- and oil-repellent coatings were prepared from an aqueous solution for the first time. In a further study, a novel and long-sought method was developed for the anionic polymerization of PEG-b-PHEMA. A PEG-DPE macroinitiator was synthesized and subsequently converted into an active initiator by reaction with sec-butyl lithium. Consequently, the active initiator underwent polymerization with HEMA-TMS to yield PEG-b-P(HEMA-TMS). Upon post-polymerization modification, PEG-b-PHEMA was obtained with a low polydispersity of 1.08. / Thesis (Ph.D, Chemistry) -- Queen's University, 2013-04-29 12:25:54.593

Di-block copolymer of poly[methacrylic acid-block-2-(diethylamino)ethyl methacrylate] [P(MAA-b-DEA)] with narrow molecular weight distribution was synthesized using the atom transfer radical polymerization (ATRP) technique. The micellization behavior of the P(MAA-b-DEA) copolymer in aqueous solution at room temperature and different pH values were examined by potentiometric and conductivity titration, UV-Visible spectrophotometry, ¹H-NMR, static and dynamic laser light scattering. At low pH (< 4.2), core-shell micelles were formed with MAA core and protonated DEA shell. At moderate pH values, the polymer precipitated from water and formed a cloudy solution, where the polymer chains aggregated into larger particles resembling that of a hard sphere induced by electrostatic interactions. At high pH (> 9.5), core-shell like micelles consisting of hydrophobic DEA core and ionized MAA shell were re-established. / Singapore-MIT Alliance (SMA)

Due to an increased environmental awareness and thus, concerns over the use of fossil-based monomer for polymer production, there is an ongoing effort to find alternatives to non-renewable traditional monomers. This has ushered in the rapid growth in the development of bio-based materials such as green monomers and biodegradable polymers from vegetable and animal resources. Glycerol, as a renewable bio-based monomer, is an interesting candidate for sustainable polymer production. Glycerol is a renewable material that is a by-product of the transesterification of vegetable oils to biodiesel. Utilization of the excess glycerol derived from the growing biodiesel industry is important to oleochemical industries. The main objective of this thesis was to produce high molecular weight polyglycerol from glycerol and synthesize stimuli-responsive polyglycerol hydrogels. The work began with an investigation of the step-growth polymerization of glycerol to relatively high molecular weight polyglycerol using several catalysts. The catalytic reaction mechanisms were compared and the polymer products were fully analyzed. High molecular weight partially branched polyglycerol with multimodal molecular weight distributions was obtained. The polymerization of glycerol proceeded fastest with sulphuric acid as catalyst as indicated by the highest observed conversion of monomer along with the highest molecular weights. Theoretical models were used to predict the gel point and to calculate monomer functionality. High molecular weight polyglycerol was used to synthesize novel stimuli-responsive hydrogels. Real-time monitoring of step-growth polymerization of glycerol was investigated using in-line and off-line Attenuated Total Reflectance/Fourier Transform infrared (ATR-FTIR) technique.

Due to an increased environmental awareness and thus, concerns over the use of fossil-based monomer for polymer production, there is an ongoing effort to find alternatives to non-renewable traditional monomers. This has ushered in the rapid growth in the development of bio-based materials such as green monomers and biodegradable polymers from vegetable and animal resources. Glycerol, as a renewable bio-based monomer, is an interesting candidate for sustainable polymer production. Glycerol is a renewable material that is a by-product of the transesterification of vegetable oils to biodiesel. Utilization of the excess glycerol derived from the growing biodiesel industry is important to oleochemical industries. The main objective of this thesis was to produce high molecular weight polyglycerol from glycerol and synthesize stimuli-responsive polyglycerol hydrogels. The work began with an investigation of the step-growth polymerization of glycerol to relatively high molecular weight polyglycerol using several catalysts. The catalytic reaction mechanisms were compared and the polymer products were fully analyzed. High molecular weight partially branched polyglycerol with multimodal molecular weight distributions was obtained. The polymerization of glycerol proceeded fastest with sulphuric acid as catalyst as indicated by the highest observed conversion of monomer along with the highest molecular weights. Theoretical models were used to predict the gel point and to calculate monomer functionality. High molecular weight polyglycerol was used to synthesize novel stimuli-responsive hydrogels. Real-time monitoring of step-growth polymerization of glycerol was investigated using in-line and off-line Attenuated Total Reflectance/Fourier Transform infrared (ATR-FTIR) technique.

Nanoparticles (such as, carbon nanotubes, carbon black, clay etc.) have one or more dimensions of the order of 100 nm or less. Owing to very high van der Waals force of attraction, these nanoparticles exist in a highly aggregated state. It is often required to break these aggregates to truly experience the “nanosize” effect for any required end use. There are several strategies proposed for dispersing/exfoliating nanoparticles but limited progress has been made towards controlling their dispersion state. The ability to tailor nanoparticle dispersion state in liquid and solid media can ultimately provide a powerful method for tailoring the properties of solution processed nanoparticle-filled polymer composites. This dissertation reports the use of a variety of stimuli-responsive polymers to control the dispersion state of single-walled carbon nanotubes. Stimuli-responsive polymers exhibit conformational transitions as a function of applied stimulus (like pH, temp, chemical etc.). These variations in conformations of the polymer can be used tailor nanotube dispersion state in water and solid composites.The use of pH and temperature responsive polymers to stabilize/disperse single walled carbon nanotubes (SWNTs) in water is presented. Non-covalent functionalization of SWNTs using pH and temperature responsive polymer show tailored dispersion state as a function of pH and temperature, respectively. Carbon nanotube microstructure in these aqueous suspensions was characterized using several techniques (cryo-TEM, viscosity measurements, uv-vis spectroscopy, zeta potential measurements and settling behavior). Furthermore, nanotube dispersion state in aqueous suspensions is preserved to a large extent in the composites formed by drying these suspensions as evidenced by SEM images and electrical conductivity measurements. Based on the results obtained a mechanism is proposed to explain the tailored dispersion of SWNTs as a functions of applied external stimulus (i.e., pH, temperature). Such stimuli-controlled dispersion of carbon nanotubes could have a variety of applications in nanoelectronics, sensing, and drug and gene delivery systems. Furthermore, this dissertation also contains a published study focused on controlling the dispersion state of carbon black (CB) in epoxy composites using clay.

Due to an increased environmental awareness and thus, concerns over the use of fossil-based monomer for polymer production, there is an ongoing effort to find alternatives to non-renewable traditional monomers. This has ushered in the rapid growth in the development of bio-based materials such as green monomers and biodegradable polymers from vegetable and animal resources. Glycerol, as a renewable bio-based monomer, is an interesting candidate for sustainable polymer production. Glycerol is a renewable material that is a by-product of the transesterification of vegetable oils to biodiesel. Utilization of the excess glycerol derived from the growing biodiesel industry is important to oleochemical industries. The main objective of this thesis was to produce high molecular weight polyglycerol from glycerol and synthesize stimuli-responsive polyglycerol hydrogels. The work began with an investigation of the step-growth polymerization of glycerol to relatively high molecular weight polyglycerol using several catalysts. The catalytic reaction mechanisms were compared and the polymer products were fully analyzed. High molecular weight partially branched polyglycerol with multimodal molecular weight distributions was obtained. The polymerization of glycerol proceeded fastest with sulphuric acid as catalyst as indicated by the highest observed conversion of monomer along with the highest molecular weights. Theoretical models were used to predict the gel point and to calculate monomer functionality. High molecular weight polyglycerol was used to synthesize novel stimuli-responsive hydrogels. Real-time monitoring of step-growth polymerization of glycerol was investigated using in-line and off-line Attenuated Total Reflectance/Fourier Transform infrared (ATR-FTIR) technique.

京都大学 / 新制・課程博士 / 博士(工学) / 甲第23924号 / 工博第5011号 / 新制||工||1782(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 浜地 格, 教授 古川 修平, 教授 杉安 和憲 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM

Orientador: Marystela Ferreira / Resumo: Neste trabalho foram desenvolvidos diferentes tipos de filmes Layer-by-Layer (LbL) sensíveis a variação de pH, temperatura, exposição a luz e presença de carboidratos, com o objetivo de criar sistemas com resposta a estímulos que podem ser aplicados na área médica e ambiental para a entrega modificada de fármacos e pesticidas. O trabalho foi dividido em três partes, sendo o primeiro focado na liberação da emodina. Foram fabricados filmes com a emodina imobilizada diretamente e outra em que o fármaco foi encapsulado nos lipossomos formados por dipalmitoil fosfatidil glicerol (DPPG) e palmitoil fosfatidil glicerol (POPG) e então intercalado com polieletrólitos. Ambos os filmes foram expostos a condições fisiológicas e liberaram a emodina por um período prolongado em função da mudança de pH e temperatura. A segunda parte do trabalho é focado na construção de filmes com um polímero baseado em espiropirano (poli(SP-R)), um composto que quando recebe luz UV é convertido para a forma aniônica merocianina (poli(MC-R)) mudando sua cor e carga superficial. O filme foi composto pelo policátion poli(alilamina hidroclorada) (PAH) formando o (PAH/poli(SP-R))n que se desprendeu do substrato pelo processo disassembly após longo tempo de exposição à luz branca. Na terceita parte do trabalho foram desenvolvidos filmes com o polímero baseado em ácido fenil borônico (PBA), que tem a capacidade de se ligar covalentemente à açucares. Foram fabricados intercalado com PVS resultando no filme (PEI/PV... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: In this work, we developed some types of Layer-by-Layer (LbL) films sensible to pH and temperature changes, light exposition and carbohydrates solutions, with the aim of to create stimuli responsive system that can be applied to medical and environmental area to drug and pesticide modulated delivery. The work was divided in three parts, the first one is based on delivery emodin. One film was fabricated with emodin immobilized directly and other the drug was encapsulated on liposomes formed by dipalmitoyl phosphatidyl glycerol (DPPG) e palmitoyl phosphatidyl glycerol (POPG) and the carrier was intercalated with polyelectrolytes. Both systems were exposed to physiologic conditions and released the emodin for prolonged time in function of pH and temperature changes. On second part of this work it was focused on construction of film with spyropiran (SP) based polymer (poli(SP-R)). The UV irradiation over (poli(SP-R)) causes the conversion to anionic and purple merocyanine molecule (poli(MC-R)) changing the color and surface charge. The film were composed by poly(allylamine hydrochloride) (PAH) and poly(SP-R) forming the (PAH/poli(SP-R))n LbL film which disassemble after long time exposed to white light. On third part of work, films were developed with phenyl borônico acid (PBA) based polymer that has the capacity to bind covalently on sugars. The films were intercalated with PVS creating the coating (PEI/PVS)2(PBAp/PVS)n. It were prepared also a film with the pyranine (PYR), the ... (Complete abstract click electronic access below) / Doutor

Due to an increased environmental awareness and thus, concerns over the use of fossil-based monomer for polymer production, there is an ongoing effort to find alternatives to non-renewable traditional monomers. This has ushered in the rapid growth in the development of bio-based materials such as green monomers and biodegradable polymers from vegetable and animal resources. Glycerol, as a renewable bio-based monomer, is an interesting candidate for sustainable polymer production. Glycerol is a renewable material that is a by-product of the transesterification of vegetable oils to biodiesel. Utilization of the excess glycerol derived from the growing biodiesel industry is important to oleochemical industries. The main objective of this thesis was to produce high molecular weight polyglycerol from glycerol and synthesize stimuli-responsive polyglycerol hydrogels. The work began with an investigation of the step-growth polymerization of glycerol to relatively high molecular weight polyglycerol using several catalysts. The catalytic reaction mechanisms were compared and the polymer products were fully analyzed. High molecular weight partially branched polyglycerol with multimodal molecular weight distributions was obtained. The polymerization of glycerol proceeded fastest with sulphuric acid as catalyst as indicated by the highest observed conversion of monomer along with the highest molecular weights. Theoretical models were used to predict the gel point and to calculate monomer functionality. High molecular weight polyglycerol was used to synthesize novel stimuli-responsive hydrogels. Real-time monitoring of step-growth polymerization of glycerol was investigated using in-line and off-line Attenuated Total Reflectance/Fourier Transform infrared (ATR-FTIR) technique.

京都大学 / 新制・課程博士 / 博士(工学) / 甲第23231号 / 工博第4875号 / 新制||工||1761(附属図書館) / 京都大学大学院工学研究科合成・生物化学専攻 / (主査)教授 浜地 格, 教授 松田 建児, 教授 生越 友樹 / 学位規則第4条第1項該当 / Doctor of Philosophy (Engineering) / Kyoto University / DGAM