Content of this diploma thesis is analysis of the operation of heat and cold sources and its evaluation based on data from measurement and control systém and design of a new solution for heating and cooling selected part of the object Otevřená zahrada. Building is located on the street Údolní in Brno. It is a three-storey building serving as offices of non-profit organizations and weekend activities of the organization. On the first floor there is a technical background of the building and half of it is used by four offices. On the second floor there is a seminar hall with a capacity of 50 persons. The rest of the floor is used by three meeting rooms and three offices. The third floor is used by four offices. For the heating and cooling of building, there are designed heat pumps ground-water. Air exchange in the building is provided by the air handling unit.

Diploma thesis solves proposal of the boarding house in Strážnice. The building is situated in the western part of Strážnice near the boat dock. Access to the pension is from the main road or on the cycling path leading along the city river. The boarding house is designed on a bed of 50 people with the possibility of a restaurant for port visitors and the public. The building has a parking space and terrace. The boarding house is two-storey with hipped roof. In the 1st floor is a restaurant with kitchen, reception with facilities for staff and smaller rooms for guests. The second floor consists of apartments and rooms. The building is brick with monolithic ceiling construction. The roof structure consists of trusses. Integral part of the landscaping with small architecture. The façade finish consists of ceramic brick cladding, scratched plaster with wooden accessories that fit into the surrounding landscape.

This diploma thesis deals with the design of a new building of the municipal office building in Bludov, at the level of design documentation for the construction. The building consists mainly of offices for the operation of the municipal office, on the first floor there is a municipal library for the public. The building is designed on a slightly sloping plot with entrance from the east side. The building consists of three above-ground floors and one underground floor. Design documentation for building construction is processed in the computer program ArchiCAD.

Subject of this thesis is elaboration study and project documentation of new firehouse building type P in Polná. New firehouse building is designed instead of the original firehouse, which was in poor technical condition and didn’t meet the new requirements. The firehouse is situated on the plot number 91/5 with adjacent numbers 91/11, 91/10, 91/7, 91/8, 91/9, 91/6, 2684, 2693. The land is slightly sloping. The building is detached, partially basement and with three aboveground floors. The vertical load-bearing structure in the basement consists of masonry from permanent formwork and in the aboveground floors the sand-lime masonry YTONG SILKA. Horizontal load-bearing structures are designed from prestressed panels Spiroll. The roof is designed as single-skin flat roof with a poured cementitious foam layer. Firehouse consists of two parts – administrative-operational part and garage of emergency vehicles with appropriate stores. The main entrance and exit of vehicles are situated southwest. The administrative of firehouse is on the 3rd floor. Fire brigade rooms are on the 2nd floor, locker rooms with clothing stores are on the 1st floor. The technical background is designed on the underground floor. Garage parking space is situated over two floors and is roofed by flat single-skin roof. Project documentation is designed according applicable laws, decrees, regulations and technical standards.

The subject of my diploma thesis is the elaboration of an architectural study and project documentation for the construction of a detached house building. The new building is located on the outskirts of slavkov, in the district of Opava. It is a three-storey non-cellar building with vertical structures in the Porotherm system, monolithic reinforced concrete ceilings and a single-skin flat roof, vegetation. Ten apartments and four separate rooms are designed in the building and wellness is designed in the first floor.

These thesis deal with assessment influence thermal insulation of the health care in Jablunkov on outlay connected with operation. The first part is dedicated to demands of energy buildings in general, legislation and basic requirements on evaluation of energy performance of buildings. Afterwards there are described individual species of thermal insulation materials including different ways of thermal insulation of constructions. Then there are described methods of budgeting and economic evaluation of investment. The second part of these thesis deal with design of several variants of thermal insulation of the health care. On the basis of proposals of thermal insulation are then stated variations in expense for management of the health care without thermal insulation of perimeter structure and on the other side with the thermal insulation variants. At the end of thesis there are evaluated all proposed variants of thermal insulation in terms of economic returns if own financial resources and credit are used.

The diploma thesis examines the influence of insulation of terraced houses on the expenses associated with their operation. Its first part deals with legislation concerning the issue and evaluation of energy performance of buildings. Furthermore, the types and properties of the used thermal insulation, methods of thermal insulation, types of filling of openings and then the used methods of budgeting are described. The second part contains several variants of insulation of terraced houses, which are assessed in terms of energy intensity and finally in terms of economic return on investment in insulation.

The subject of thesis is a project documentation of a single-standing multifunctional building. Object has 4 floors with no basement. Vertical load-bearing structures are designed from ceramic masonry Porotherm. Ceilings are monolithic, reinforced concrete. The roof is designed as a single-layer flat roof.

This thesis addressed the development renders the optimal ratio of thermal insulation and mechanical properties. In developing these materials were used alternative latent hydraulic binders. Research was conducted plasters and renders the requirements of technical standards in the Czech Republic. Work dealt with the general composition of plaster, including the use of secondary raw materials in dry plaster mixtures and thermal insulation properties and remediation plaster. Furthermore, the measured values of physical and mechanical properties of the test formulations. The best recipes were compared with plaster on the Czech market.

This Diploma thesis deals with the topic of multifunctional house. The building is situated on the street Pod Studánkou in Pardubice. This house is brand new building, four-storey, basementless, with a single layered flat roof. Height of the house is 13,580 meters. On the first floor there is technical hinterland and commercial places for a rent. On the second, third and fourth floor there are situated thirteen flats for a living. The foundations of the house are made of concrete C16/20. The bearing walls are made of masonry Porotherm. The external bearing walls are combined with the contact thermal-insulation. Windows and doors are triple glazed with a thermal-insulation.