The aim of the thesis is the strengthening and resistance of concrete construction. At the beginning is described composite reinforcement and their specific properties. The thesis specifically follows behavior concrete vault and the effects of load. Resistance vault is calculated by S&T model – strut and tie. Finally, the thesis contain strengthening construction by composite reinforcement. Strengthening is considered by two ways - strengthening by cohesive reinforcement and strengthening by incoherent reinforcement (wrapping).

The aim of this final thesis was static protection for castle in Miroslavské Knínice. It was necessary to explore several respects and find signs of violation. Next analyze and propose suitable assurance of individual parts. Separe into the stages of construction and to consider the proposal in terms of ensuring the resistance of materials. Finally create a detailed documentation in the range suitable for performance. Based on engineering geology and visual survey was designed horizontal bracing prestressing cables at three levels. The first level "A" consists of a closed circuit of prestressed reinforced concrete passports, supplemented by the cross and construction of prestressed reinforced concrete passports. Next level "B,C" is used to secure the top of the building. Levels “B,C” are proposed using prestressed cable in spare cable channels.

The subject of diploma thesis is designing multi-span highway bridge over Řepovský potok valley, dirt roads and biocorridor. Three variants of bridge were designed and one of them – box girder 10 span bridge, has been chosen. Bridge deck is made from cast in place post tension prestressed beam. Load-bearing structure is concreting step by step on fixed and moving support. Total length of bridge is 560 m. The analysis of structure was projected on several computational models. They have been made in software Midas Civil and SCIA Engineer 18.1. The assessments of ultimate limit state and serviceability limit state were made in all steps of building in longitudinal and cross direction. In the analysis in longitudinal direction is included the time dependent analysis. Structural design was made in software MS Excel according to valid standards. Finally, drawing documentation and visualization were made.

Denna rapport inleds med övergripande genomgång av dagens gällande regelverk, Eurokod, medförklaring av olika begrepp som är relaterade till ämnet robusthet. Det görs en genomgång av huren byggnadskonstruktör bör beakta robustheten med förslag vid olika dimensioneringssituationerenligt norm. Eftersom normen inte alltid är tydlig, så redovisas en tolkning av normen (inkl. EKS11) i enlighet med fib (2012). Vidare så förtydligas även innebörden av konsekvensklasser, riskanalyser,utformning och dimensionering av förband och dragband enligt norm. I dettaexamensarbete redogörs också för de egenskaper som är viktiga för att bärverk ska kunna motståexceptionella förhållanden. Beräkningsexempel ges, med förslag på utformning och placering avförband för att uppnå en viss robusthet enligt norm. Dagens regelverk är många gångerbristfälliga och oklara. Exempelvis finns ingen dimensioneringsprocedur för hur en tillräckligrobusthet uppnås, vilket nödvändigtvis inte alltid är den minimala robustheten som normen ger.Det framgår heller inte hur bärverken bör utformas för att uppnå robusthet och redundans,speciellt för prefabricerade element-, där tillräcklig robusthet många gånger kan vara svårt elleromöjligt att uppnå. Normens dimensioneringssituationer grundar sig på statiska lastmodeller ochhuruvida dessa ger tillräcklig robusthet eller inte, läggs det ingen fokus på. Robusthetens storlekbaserar sig mer eller mindre på vedertagna schablonmässiga värden. En nackdel med detta äratt förutsättningar i byggnader kan förändras med tiden vilket kan leda till att dagensdimensionering blir otillräcklig. Detta belyser faran med att vara nöjd med dagens förenkladedimensioneringsverktyg, eftersom den bakomliggande fysiken då lätt kommer i skymundan, elleri värsta fall, faller i glömska. Ett exempel på detta är dimensionering av väsentliga bärverk (keyelement)som är avgörande för byggnadens stabilitet eller för att motverka fortskridande rasenligt SS-EN 1991-1-7. Väsentliga bärverk dimensioneras för en statiskt jämnt utbredd last på34 kN/m² som är ett uppskattat värde utifrån en olyckshändelse med en gasexplosion i RonanPoint (Storbritannien). Värdet härstammar ifrån värdet 5 psi (gasol/hushållsgas kan ge ensprängkraft på 2,5 psi) och man kan fundera på om detta värde är lämpligt att använda i Sverige,då nästan inga gasspisar används i bostäder idag. I detta examensarbete beskrivs övergripandebärverkets dynamiska respons. Det är vanligt att byggnadskonstruktörer många gånger intebesitter kunskaper om dynamiska laster, bärverkens dynamiska respons och ibland icke-linjäraanalyser. Exceptionell last som är ett samlingsnamn för flera olyckslaster så som explosion,påkörning (från fordon, tåg, fartyg etc.), brand, häftiga helikopterlandningar etc. I dettaexamensarbete har valts att lägga fokus på okända olyckslaster och en känd, vanligtförekommande olyckslast (påkörningslast). / This report begins with an overall review of the current regulations, Eurocode, and explanations ofvarious concepts related to the topic of robustness. A review of how a building designer shouldconsider the robustness with proposals for different design situations according to the guidelines isalso presented. Since the guidelines are not always clear, an interpretation of its application (incl.EKS 11) in accordance with fib (2012) is given. Furthermore, the meaning of consequence classes,risk analyzes, design of tension ties is clarified. In this thesis it is discussed what properties areimportant for the structures to withstand exceptional loads. Calculation examples and placement oftension ties to achieve a certain robustness are presented. Current regulations are often insufficientand unclear. For example, there is no procedure for how to achieve enough robustness, which isnot always the minimum robustness that the code prescribes. It is also not clear how the structuresshould be designed to achieve robustness and redundancy, especially for prefabricated elements,where enough robustness often can be difficult or impossible to achieve. The current code is basedon static load models, and whether they provide enough robustness are not considered. The robustnessis based on accepted code values. One disadvantage is that conditions in buildings can changeover time, which can cause current design methods to be insufficient. This highlights the danger ofbeing satisfied with current simplified codes and guidelines, since the underlying physics can easilyfall into oblivion. An example of this is the design of key elements that are crucial for the stabilityof buildings or to withstand progressive collapse according to SS-EN 1991-1-7. Key elementsare designed for a statically uniformly distributed load of 34 kN/m², which is an estimatedvalue from an accident, where the value reflects the explosion load from a gas explosion inRonan Point (United Kingdom). The value stands for 5 psi and one can wonder if this value issuitable to use in Sweden, since almost no gas stoves are used anymore in housing today. Thisthesis describes overall the dynamic response of a structure. It is common that building designersoften do not have knowledge of dynamic loads, the dynamic response and sometimes non-linearanalyzes. Exceptional load is a collective name for several accident loads such as explosion,collision (from vehicles, trains, ships etc.), fire, violent helicopter landings etc. In this thesisit is chosen to focus on unknown accident loads and one com-mon, known accident load (impactload.

As the main topic this thesis describes the design and evaluation of selected reinforced concrete members of the prefabricated reinforced concrete industrial building with administration at ultimate limit state in accordance with applicable standards. Movable overhead crane with carrying capacity of 50 tons is the main distinction of the industrial hall. Lateral frame whit main structural parts which are roof prestressed girder, load-bearing column supporting the overhead crane and drilled pile transferring loads from the upper construction to the load bearing subsoil, is designed in particular. Furthermore, design of the Gerber beam which forms the slab construction in the administrational part of the building is elaborated. Structural design and evaluation of other structures of the building is not part of this thesis.