Adoption of no-till (NT) and reduced tillage management is widespread on the Canadian prairies and together form the basic platform of soil management upon which most crop production is based. Elimination of tillage in cropping systems changes the physical and chemical characteristics of the soil profile and can affect crop growth and ultimately yield. As such, understanding how soil biota, as drivers of nutrient turnover, adapt to NT is important for maximizing crop productivity and mitigating environmental damage in agroecosystems. This work aims to achieve a greater understanding of microbial community structure and function in long-term NT versus conventionally tilled (CT) soils. Community phospholipid and DNA fingerprinting did not reveal any consistent tillage-induced shifts in microbial community structure, but demonstrated a clear influence of depth within the soil profile. While tillage did not result in broad changes in the community structure, total, bacterial and fungal biomass was consistently greater near the surface of NT soils. Further examination at one site near Swift Current, SK revealed differences in microbial biomass and community structure in NT and CT in field-formed aggregate size fractions. Measurement of mineralization and nitrification at the same site indicated that differences in the early-season turnover of N may be related to physical rather than microbial differences in NT and CT soils. Potential nitrification was higher prior to seeding than mid-season, was not affected by tillage and was correlated with ammonia oxidizer population size of archaea, but not bacteria. This work indicates that edaphic soil properties and spatial distribution of resources in the soil profile, rather than tillage management, are the primary factors driving microbial community structure in these soils.

A major goal for Mongolia is to eliminate rural poverty through sustainable rural development. To accomplish this, the agricultural sector must become more profitable and sustainable. Declining crop yields can be addressed by the adoption of new technology. Barriers to introduction of new agricultural technologies were evaluated using an inter-disciplinary perspective.<p> Field research was carried out to understand the factors affecting Mongolian farmers decisions to adopt conservation farming practices. A semi-structured survey questionnaire was completed by 42 farmers and 30 extension agents and in-depth interviews were conducted with ten adopter-farmers in Mongolia. The introduction of conservation tillage was used to illustrate a technology transfer system and the challenges it poses.<p> To most of the farmers, the main advantages of this technology were reduced soil erosion, increased cost efficiency, and higher crop yields. The main disadvantages found were high investment costs, unreliable input supply, and a lack of knowledge of the technology. Factors that encourage adoption of new technologies include government financial incentives, reduced labor requirements, and increased production due to better soil and water conservation. A lack of investment capital, required inputs, and relevant knowledge were all identified as barriers for the utilization of such new technologies. In general, early adopters and non-adopters of conservation tillage differed in that the early adopters tended to have more farmland, livestock, and equipment. The field studies in Mongolia were complemented by field research trials in Canada that evaluated new technologies for weed control in conservation tillage systems.<p> One key to the successful adoption of new agriculture technologies is an effective and responsive research and extension system. Currently, for Mongolian farmers and extension agents, international projects are the main source of information with respect to new agricultural technologies. The capacity of local research and extension institutions is fairly limited. It will be important to establish better linkages among 3 researchers, extension agents, farmers, and policy makers through reorganization and strengthening of Mongolias top-down research and extension system. Meaningful farmer participation must take place at all stages of any technology transfer process.<p> Based on these principles, an interdisciplinary, inclusive, and responsive national agricultural research and extension model is proposed.

The amount of energy consumed during a tillage operation depends on three categories of parameters: (1) soil parameters (2) tool parameters and (3) operating parameters. Although many research works have been reported on the effects of those parameters on tillage energy, the exact number of affecting parameters and the contribution of each parameter in total energy requirement have not been specified. A study with the objectives of specifying energy consuming components and determining the amount of each component for a vertical narrow tool, particularly at high speeds of operation, was conducted in the soil bin facilities of the Department of Agricultural and Bioresource Engineering, University of Saskatchewan. <p>Based on studies by Blumel (1986) and Kushwaha and Linke (1996), four main energy consuming components were assumed: <p>(1) energy requirements associated with soil-tool interactions;<p>(2) energy requirements associated with interactions between tilled and fixed soil masses;<p>(3) energy requirements associated with soil deformation; and <p>(4) energy requirements associated with the acceleration of the tilled soil. <p> Energy requirement of a vertical narrow tool was calculated based on the draft requirement of the tool measured in the soil bin. The effects of three variables, moisture content, operating depth and forward speed, were studied at different levels: (1) moisture content at 14% and 20%; (2) depth at 40, 80, 120 and 160 mm; and (3) speed at 1, 8, 16 and 24 km h-1. Total energy requirement was divided into these four components based upon the procedure developed in the research. <p>Regression equations for different energy components were developed based on experimental data of two replicates and then validated by extra soil bin experiments conducted at same soil and tool but different operational conditions. The set up of energy components data in the model development showed good correlation with the available experimental data for all four components. Coefficients of all regression equations showed a first order energy-moisture content relationship best applicable to those equations of energy components. For the acceleration component, energy-depth relationship at all speed levels resulted in an equation which included first and second orders of depth. In contrast, if only two higher levels of speed were used in the regression model, the relationship between acceleration energy and depth resulted in the second order of depth. When experimental data of acceleration energy at 8, 16, and 24 km h-1 speeds were used in the regression equation, the acceleration energy-speed relationship resulted in both linear and quadratic relationships. It was concluded that for the tool and soil conditions used in the experiments, 8 km h-1 speed resulted in only linear relationship. On the other hand, 16 and 24 km h-1 speeds resulted in a quadratic relationship. Therefore, for all 3 speeds used in experiments, both linear and quadratic relationships were obtained. Considering that the tool was operating at high speeds, this research is expected to contribute valuable experimental data to the researchers working in the field of soil dynamics.

A major goal for Mongolia is to eliminate rural poverty through sustainable rural development. To accomplish this, the agricultural sector must become more profitable and sustainable. Declining crop yields can be addressed by the adoption of new technology. Barriers to introduction of new agricultural technologies were evaluated using an inter-disciplinary perspective.<p> Field research was carried out to understand the factors affecting Mongolian farmers decisions to adopt conservation farming practices. A semi-structured survey questionnaire was completed by 42 farmers and 30 extension agents and in-depth interviews were conducted with ten adopter-farmers in Mongolia. The introduction of conservation tillage was used to illustrate a technology transfer system and the challenges it poses.<p> To most of the farmers, the main advantages of this technology were reduced soil erosion, increased cost efficiency, and higher crop yields. The main disadvantages found were high investment costs, unreliable input supply, and a lack of knowledge of the technology. Factors that encourage adoption of new technologies include government financial incentives, reduced labor requirements, and increased production due to better soil and water conservation. A lack of investment capital, required inputs, and relevant knowledge were all identified as barriers for the utilization of such new technologies. In general, early adopters and non-adopters of conservation tillage differed in that the early adopters tended to have more farmland, livestock, and equipment. The field studies in Mongolia were complemented by field research trials in Canada that evaluated new technologies for weed control in conservation tillage systems.<p> One key to the successful adoption of new agriculture technologies is an effective and responsive research and extension system. Currently, for Mongolian farmers and extension agents, international projects are the main source of information with respect to new agricultural technologies. The capacity of local research and extension institutions is fairly limited. It will be important to establish better linkages among 3 researchers, extension agents, farmers, and policy makers through reorganization and strengthening of Mongolias top-down research and extension system. Meaningful farmer participation must take place at all stages of any technology transfer process.<p> Based on these principles, an interdisciplinary, inclusive, and responsive national agricultural research and extension model is proposed.

El balanç entre l´entrada de C (dels residus vegetals) i sortides de C (principalment com CO2 de la descomposició del carboni orgànic del sòl -SOC-), determina el contingut de SOC, que és el depòsit de C més voluminós a la superfície terrestre. Als agroecosistemes semiàrids Mediterránis, l’aigua és el principal factor limitant del creixement del cultiu i de l´entrada de residus al sòl. Les pràctiques agronòmiques alternatives poden millorar el creixement vegetal i augmentar la quantitat de residus (entrada de C) en aquestos sistemes. No obstant això la resposta del contingut de SOC dependrà del balanç de les entrades amb les sortides de C. Aquest treball estudia els efectes de l’adopció a llarg termini de sistemes de conreu (NT, sembra directa; MT, mínim conreu CT, conreu convencional) i del nivell de fertilizació nitrogenada (zero; mitjà, 60 kg N ha-1; alt, 120 kg N ha-1) al balanç de C del sòl i el contingut de SOC. El contingut de SOC augmentà finalment 4.3 i 3.9 Mg C ha-1 sota NT repecte a MT i CT. Nivells mitjans i alts de fertilització nitrogenada augmentaren el contingut de SOC en 3.4 i 4.5 Mg C ha-1 respecte al contingut a les parcel•les no fertilitzades. L´adopció a llarg termini de pràctiques de conreu de conservació (sembra directa), juntament amb l’ús adequat de la fertilització nitrogenada van demostrar ser eines per a millorar la sostenibilitat dels nostres secans i emmagatzemar C al sòl. / El balance entre la entrada de C (de los residuos vegetales) y salidas de C (principalmente como CO2 de la descomposición del carbono orgánico del suelo -SOC-), determina el contenido de SOC, que es el mayor depósito terrestre de C. En agroecosistemas semiáridos Mediterráneos, el agua es el principal factor limitante del crecimiento del cultivo y de la entrada de residuos en el suelo. Las prácticas agronómicas alternativas pueden mejorar el crecimiento vegetal y aumentar la cantidad de residuos (entrada de C) en estos sistemas. Este trabajo estudió los efectos de la adopción a largo plazo de sistemas de laboreo (NT, no-laboreo; MT, laboreo minimo; CT, laboreo convencional) y del nivel de fertilización nitrogenada (cero; medio, 60 kg N ha-1; alto, 120 kg N ha-1) en el balance de C del suelo y el contenido de SOC. El contenido de SOC aumentó en 4.3 y 3.9 Mg C ha-1 bajo NT con respecto a MT y CT. Niveles medios y altos de fertilización nitrogenada aumentaron el contenido de SOC en 3.4 y 4.5 Mg C ha-1 con respecto al contenido en las parcelas no fertilizadas. La adopción a largo plazo de prácticas de laboreo de conservación (no-laboreo o siembra directa), junto con el uso adecuado de la fertilitzación nitrogenada demostraron ser herramientas para mejorar la sostenibilidad de los secanos semiáridos Mediterráneos y almacenar C en el suelo. / The balance between C inputs (from plant residues) and C outputs (mainly as CO2 from soil organic carbon -SOC- decomposition) determines the content of SOC which is is the largest terrestrial reservoir of carbon. Under semiarid Mediterranean agroecosystems, water limitation restrains plant growth and the return of crop residues to the soil. Alternative agronomical practices may improve crop growth and increase return of crop residue (C inputs) under these systems. This work studied the effects of long term adoption of tillage practices (NT, no-tillage; MT, minimum tillage; CT, conventional tillage) and nitrogen (N) fertilization level (zero; medium, 60 kg N ha-1; high, 120 kg N ha-1) on the SOC balance and the content of SOC. The stock of SOC was increased by 4.3 and 3.9 Mg C ha-1 under NT in comparison to MT and CT respectively. Long-term medium and high N fertilization increased the stock of SOC by 3.4 and 4.5 Mg C ha-1 in contrast to unfertilized plots. Long-term adoption of conservation tillage practices (no-tillage) together with adequate N fertilizer use, proved to be effective tools to improve sustainability of semiarid Mediterranean drylands and to store C in the soil.

The purpose of this research was to investigate how sustainable agriculture is being conceptualized and implemented in Saskatchewan. Zero tillage, organic farming, and the discourses surrounding them were examined as theoretical and practical responses to sustainable agriculture. Characteristics of 33 organic and 33 zero tillage farming systems located throughout the soil climatic zones of southern Saskatchewan were compared, as well as farmers' perceptions of sustainable agriculture and factors influencing their management decisions. The analysis was extended beyond the local level by examining the links between major socio-political forces shaping agriculture and farmers' perceptions and choices. Central to this analysis is an examination of the role of informal and formal knowledge systems in the development of sustainable agriculture, and how relations of power affect the knowledge that is being produced and ultimately the direction of change in agriculture. Interdisciplinary and exploratory approaches were used to identify and examine a range of emergent issues. The data gathered was analyzed both quantitatively and qualitatively. This study revealed commonalities between zero tillage and organic farmers' basic views on sustainable agriculture, and important differences in the ways these two groups of farmers translated these ideas into practice. Most farmers defined sustainability at the farm-level, focusing on land stewardship and the preservation of the family farm. Farmers adopted zero tillage because of specific environmental, economic and labour advantages, whereas organic farming was adopted for a combination of environmental, health, economic, philosophical/spiritual and labour factors. In general, zero tillage and organic farming systems differed in size, in production and management operations, in land tenure, and in the use of purchased inputs and labour. Zero tillage farms tended to be large, capital-intensive, specialized cropping operations, with a significant proportion of rented land and non-family hired labour. Organic farms were moderate-sized, diversified crop and livestock operations that substituted biological and cultural practices for purchased (agrochemical) inputs, had a high degree of ownership, and relied more upon labour exchange. These characteristics create distinct environmental, economic and social advantages and disadvantages. Zero tillage, compatible with the dominant agricultural paradigm and the industrial model, continues to be promoted by agricultural institutions and agribusiness as the best solution to farm-level sustainability. Interest in organic agriculture and the alternative agricultural paradigm is increasing, however, due to the current crisis in the farm economy and changes in consumers' perceptions and choices.

The amount of energy consumed during a tillage operation depends on three categories of parameters: (1) soil parameters (2) tool parameters and (3) operating parameters. Although many research works have been reported on the effects of those parameters on tillage energy, the exact number of affecting parameters and the contribution of each parameter in total energy requirement have not been specified. A study with the objectives of specifying energy consuming components and determining the amount of each component for a vertical narrow tool, particularly at high speeds of operation, was conducted in the soil bin facilities of the Department of Agricultural and Bioresource Engineering, University of Saskatchewan. <p>Based on studies by Blumel (1986) and Kushwaha and Linke (1996), four main energy consuming components were assumed: <p>(1) energy requirements associated with soil-tool interactions;<p>(2) energy requirements associated with interactions between tilled and fixed soil masses;<p>(3) energy requirements associated with soil deformation; and <p>(4) energy requirements associated with the acceleration of the tilled soil. <p> Energy requirement of a vertical narrow tool was calculated based on the draft requirement of the tool measured in the soil bin. The effects of three variables, moisture content, operating depth and forward speed, were studied at different levels: (1) moisture content at 14% and 20%; (2) depth at 40, 80, 120 and 160 mm; and (3) speed at 1, 8, 16 and 24 km h-1. Total energy requirement was divided into these four components based upon the procedure developed in the research. <p>Regression equations for different energy components were developed based on experimental data of two replicates and then validated by extra soil bin experiments conducted at same soil and tool but different operational conditions. The set up of energy components data in the model development showed good correlation with the available experimental data for all four components. Coefficients of all regression equations showed a first order energy-moisture content relationship best applicable to those equations of energy components. For the acceleration component, energy-depth relationship at all speed levels resulted in an equation which included first and second orders of depth. In contrast, if only two higher levels of speed were used in the regression model, the relationship between acceleration energy and depth resulted in the second order of depth. When experimental data of acceleration energy at 8, 16, and 24 km h-1 speeds were used in the regression equation, the acceleration energy-speed relationship resulted in both linear and quadratic relationships. It was concluded that for the tool and soil conditions used in the experiments, 8 km h-1 speed resulted in only linear relationship. On the other hand, 16 and 24 km h-1 speeds resulted in a quadratic relationship. Therefore, for all 3 speeds used in experiments, both linear and quadratic relationships were obtained. Considering that the tool was operating at high speeds, this research is expected to contribute valuable experimental data to the researchers working in the field of soil dynamics.

Adoption of no-till (NT) and reduced tillage management is widespread on the Canadian prairies and together form the basic platform of soil management upon which most crop production is based. Elimination of tillage in cropping systems changes the physical and chemical characteristics of the soil profile and can affect crop growth and ultimately yield. As such, understanding how soil biota, as drivers of nutrient turnover, adapt to NT is important for maximizing crop productivity and mitigating environmental damage in agroecosystems. This work aims to achieve a greater understanding of microbial community structure and function in long-term NT versus conventionally tilled (CT) soils. Community phospholipid and DNA fingerprinting did not reveal any consistent tillage-induced shifts in microbial community structure, but demonstrated a clear influence of depth within the soil profile. While tillage did not result in broad changes in the community structure, total, bacterial and fungal biomass was consistently greater near the surface of NT soils. Further examination at one site near Swift Current, SK revealed differences in microbial biomass and community structure in NT and CT in field-formed aggregate size fractions. Measurement of mineralization and nitrification at the same site indicated that differences in the early-season turnover of N may be related to physical rather than microbial differences in NT and CT soils. Potential nitrification was higher prior to seeding than mid-season, was not affected by tillage and was correlated with ammonia oxidizer population size of archaea, but not bacteria. This work indicates that edaphic soil properties and spatial distribution of resources in the soil profile, rather than tillage management, are the primary factors driving microbial community structure in these soils.

Studies were conducted in 2004, 2005, and 2006 in south Texas to evaluate fall, winter, and spring weed control for commercial rice production, study tillage intensity and herbicide rate interactions for rice production, and determine the tolerance of red rice ecotypes from Texas rice fields using selected herbicides at varying rates. A single application of any herbicide or combination of herbicides was not adequate for weed control throughout the fall, winter, and spring. Fall applications of clomazone plus flumioxazin provided consistent weed control. Addition of flumioxazin to glyphosate provided excellent winter annual grass control with winter application. A residual herbicide, coupled with the proper contact herbicide is the key to extending control. In 2006, all tillage by herbicide treatments in all studies provided ≥ 90% control of all weed species. The conventional tillage treatment with low herbicide input provided the highest rice grain yield in 2005 and 2006, though they were not significantly different from the spring stale seedbed program with medium or high herbicide input in 2006. In 2006, fall stale seedbed treatments were among the lowest in yield. A stale seedbed program may be useful, but with substantial weed pressure, increasing the intensity of herbicide applications is necessary to overcome the absence of tillage. All rice ecotypes were adequately controlled by glyphosate and only one ecotype was found to be tolerant to 2x rates of both imazethapyr and imazamox. All ecotypes were adequately controlled by 2x rates of more than two of the four herbicides which included imazethapy, imazamox, glufosinate, and glyphosate. Ecotypes from the 3.2 group, genetically similar to the ecotype TX4, appear to be the most likely to exhibit tolerance to a given herbicide. Tolerance to glufosinate was found in 70% of the group 3.2 ecotypes. Sixty percent of ecotypes from group 3.1, genetically similar to Oryza rufipogon were not adequately controlled by glufosinate.

The Texas Blackland Prairie is one of the most productive agricultural regions in Texas. This region provides a long growing season coupled with soils that have a high water holding capacity. However, the soils also provide significant challenges to producers because the high water holding capacity is a product of a high clay percentage. This research was aimed to develop and test an expert-based trafficabililty index, based upon soil moisture, for planting cotton (Gossypium hirsutum L.) and corn (Zea mays L.) on the Texas Blackland Prairie. Testing the index focused on quantify the potential effect of high soil moisture at planting on seed furrow sidewall compaction and associated plant growth response. Once the trafficability index was developed, three workable soil moisture regimes were recreated in no-tillage and conventional tillage plots at the Stiles Farm Foundation in Thrall, Texas. The index nomenclature included: "Dry-Workable", "Optimal" and "Wet-Workable". After planting corn and cotton into conventional and no tillage plots, 0.45 x 0.20 x 0.15 m intact soil blocks were removed from each plot and kept in a controlled environment. At 28 days, each block was destructively harvested to quantify plant root and shoot growth responses. Each of the three soil moisture indexes was replicated thrice per crop, and the whole experiment was replicated twice in time, n = 48 blocks. The trafficability index was created using three producer experts, and over 10 interviews to collect a range in soil moisture samples. From "Wet Workable" to "Dry Workable", the gravimetric soil moistures were 0.17, 0.22, and 0.26 g g-1. For corn and cotton, a positive relationship between plant growth factors and planting at soil moisture existed. Plants planted at the highest soil moisture emerged faster and developed more root and shoot biomass than those planted at the lowest soil moisture. No evidence of a detrimental plant response because of seed furrow, sidewall compaction from planting at too high a soil moisture content could be quantified. Furthermore, the cotton plants in no-tillage performed better than in conventional tillage, but corn performed better in conventional tillage. Because the results showed an advantage to plant growth by planting in the "Wet Workable" index, the tillage practice that allows the producer to enter the field with a planter at higher moisture contents appears to have an advantage.