Esse trabalho aborda a elaboração de requisitos dos usuários como parte da adequação do sistema de informação-SISTEMA DE INFORMAÇÃO DE GESTÃO ACADÊMICA-Administrativo- SIGA-Adm, proposto para o Hospital Universitário da Universidade Federal de Juiz de Fora. SIGA-Adm está em utilização, desde 2007, na Universidade Federal de Juiz de Fora. No entanto, para a efetiva aplicabilidade no âmbito do Hospital Universitário, torna-se necessário uma investigação acerca dos processos de trabalho, dentro do HU e uma ação de melhoria desses processos, a fim de evitar a incorporação de um sistema de informação que não corresponda a realidade apresentada. A elaboração dos requisitos dos usuários para a adequação visa a ser um instrumento de intermediação para discussão acerca da elaboração do SIGA-Adm para o HU/UFJF. Os requisitos apresentados originaram-se no processo de gerenciamento de materiais, como resultado da utilização da Metodologia de Análise e Melhoria de Processos-MAMP, aplicada na cadeia de suprimentos do Hospital Universitário, no período de 2004 a 2005. O acompanhamento do gerenciamento de materiais é uma estratégia utilizada pela Rede Sentinela para o desenvolvimento de ações de pós-comercialização de produtos para a saúde tais como: investigação de uso, registro de produtos, retirada de produto do mercado e etc... O Hospital Universitário da UFJF é integrante da Rede Brasileira de Hospitais Sentinela, implementada pela Agência Nacional de Vigilância Sanitária, desde 2001. As ações Pós-Comercialização de Produtos para a Saúde, em Tecnovigilância, são compartilhadas pela ANVISA e pelos integrantes da Rede Sentinela, através de informações relativas a queixas técnicas e/ou eventos adversos que possam causar algum dano à população. A pesquisa indica a possibilidade do SIGA-Adm armazenar informações sobre os produtos que permitam o rastreamento em condições normais e/ou anormais de uso pela instituição, contribuindo para o exercício em Tecnovigilância. Além disso, espera-se que construção do SIGA-Adm/HU-UFJF permita integrar os sistemas existentes no HU. / This dissertation aims to analyze requirements of SIGA-ADM (Academic Information and Management System) in University Hospital of Federal University of Juiz de Fora (HU-UFJF). It has been used since 2007 at UFJF. For an effective applicability within the HU-UFJF, it was necessary to inquire into the work processes within the HU and do an action of enhancing these processes. It was relevant to avoid incorporation of information that does not match reality. A development of user requirements for the adequacy intended to be an instrument of intermediation for discussion about the development of SIGA- Adm for HU/UFJF. Use of Methodology for Analysis and Process Improvement - MAMP - in the supply chain of HU during 2004 / 2005, allowed to observe the requirements of users. A monitoring of material management is a strategy used by the Sentinel Network for the development of post-marketing actions of health products such as research use, product registration, withdrawal of product from the market and so on. University Hospital of UFJF is a member of the Brazilian Network of Sentinel Hospitals, implemented by the National Sanitary Surveillance Agency, since 2001. Shares of post-marketing products for health (in Technical surveillance) are shared by members of the ANVISA and the Sentinel Network through information on technical defects and / or adverse events that may cause harm to the population. As a result it is observed that SIGA-Adm can store information about products that allow tracking in normal and / or abnormal use by the institution and this contributes to the Technical surveillance exercise. Moreover, it is expected that construction of SIGA-Adm/HUUFJF be integrated into existing systems at UH.

Esse trabalho aborda a elaboração de requisitos dos usuários como parte da adequação do sistema de informação-SISTEMA DE INFORMAÇÃO DE GESTÃO ACADÊMICA-Administrativo- SIGA-Adm, proposto para o Hospital Universitário da Universidade Federal de Juiz de Fora. SIGA-Adm está em utilização, desde 2007, na Universidade Federal de Juiz de Fora. No entanto, para a efetiva aplicabilidade no âmbito do Hospital Universitário, torna-se necessário uma investigação acerca dos processos de trabalho, dentro do HU e uma ação de melhoria desses processos, a fim de evitar a incorporação de um sistema de informação que não corresponda a realidade apresentada. A elaboração dos requisitos dos usuários para a adequação visa a ser um instrumento de intermediação para discussão acerca da elaboração do SIGA-Adm para o HU/UFJF. Os requisitos apresentados originaram-se no processo de gerenciamento de materiais, como resultado da utilização da Metodologia de Análise e Melhoria de Processos-MAMP, aplicada na cadeia de suprimentos do Hospital Universitário, no período de 2004 a 2005. O acompanhamento do gerenciamento de materiais é uma estratégia utilizada pela Rede Sentinela para o desenvolvimento de ações de pós-comercialização de produtos para a saúde tais como: investigação de uso, registro de produtos, retirada de produto do mercado e etc... O Hospital Universitário da UFJF é integrante da Rede Brasileira de Hospitais Sentinela, implementada pela Agência Nacional de Vigilância Sanitária, desde 2001. As ações Pós-Comercialização de Produtos para a Saúde, em Tecnovigilância, são compartilhadas pela ANVISA e pelos integrantes da Rede Sentinela, através de informações relativas a queixas técnicas e/ou eventos adversos que possam causar algum dano à população. A pesquisa indica a possibilidade do SIGA-Adm armazenar informações sobre os produtos que permitam o rastreamento em condições normais e/ou anormais de uso pela instituição, contribuindo para o exercício em Tecnovigilância. Além disso, espera-se que construção do SIGA-Adm/HU-UFJF permita integrar os sistemas existentes no HU. / This dissertation aims to analyze requirements of SIGA-ADM (Academic Information and Management System) in University Hospital of Federal University of Juiz de Fora (HU-UFJF). It has been used since 2007 at UFJF. For an effective applicability within the HU-UFJF, it was necessary to inquire into the work processes within the HU and do an action of enhancing these processes. It was relevant to avoid incorporation of information that does not match reality. A development of user requirements for the adequacy intended to be an instrument of intermediation for discussion about the development of SIGA- Adm for HU/UFJF. Use of Methodology for Analysis and Process Improvement - MAMP - in the supply chain of HU during 2004 / 2005, allowed to observe the requirements of users. A monitoring of material management is a strategy used by the Sentinel Network for the development of post-marketing actions of health products such as research use, product registration, withdrawal of product from the market and so on. University Hospital of UFJF is a member of the Brazilian Network of Sentinel Hospitals, implemented by the National Sanitary Surveillance Agency, since 2001. Shares of post-marketing products for health (in Technical surveillance) are shared by members of the ANVISA and the Sentinel Network through information on technical defects and / or adverse events that may cause harm to the population. As a result it is observed that SIGA-Adm can store information about products that allow tracking in normal and / or abnormal use by the institution and this contributes to the Technical surveillance exercise. Moreover, it is expected that construction of SIGA-Adm/HUUFJF be integrated into existing systems at UH.

The diploma thesis deals with an application of partial reliability coefficients of reliability in assessing the safety of water works. The reliability factors are the quantitative condition of the marginal equilibrium. A more detailed study of the methods of the marginal equilibrium method led to an assessment of the overall and local stability of the Vranov Dam. The baseline for the evaluation were the data provided by the Technical Surveillance (TBD) and available literature. The GeoStudio 2018 was used to calculate the loads on the Vranov waterworks. The model of the groundwater flow in the subsoil was calculated by the Seep/W module and the Sigma/W module was used to determine the local stresses. Subsequently, the selection of partial reliability coefficients and theirs subsequent application to the limit equilibrium conditions were performed. Stability assessments were complemented by calculations of safety factors. The results were compared with each other.

The problem that was identified is that physical surveillance is not generally used by general detectives in the South African Police Service as a technique during their investigations. According to the researcher’s experience, this can be due to lack of understanding or experience or may stem from ignorance. A lack of training on the use of physical surveillance as a method to obtain information for the investigation process was also identified as a problem. This study therefore investigated the role and use of physical surveillance within the forensic investigation process. The focus of the research was on basic static (stationary), foot and vehicle surveillance as these types of surveillance are usually conducted in conjunction with each other. An empirical research design was used to conduct the research. A qualitative research approach enabled the researcher to obtain first-hand information from interviews with general detectives. Information was also obtained from a thorough literature study and from the researcher’s own experience on the topic. To conduct effective investigation, it is important for investigators to be familiar with the concept of physical surveillance, its elements, its influence and its values. A physical surveillance operation is a forensic tool used to gather evidence, to recover stolen property, and to identify and arrest the perpetrator. The use of physical surveillance during investigations serves the purpose of gathering evidence and information that can be used as intelligence. Successful forensic investigation requires skill and places extraordinary demands on detectives to utilise all available methods and techniques. The recognition of the use of physical surveillance as a method of evidence gathering is of outmost importance. The research has revealed that general detectives do not acknowledge the importance of physical surveillance as a method to obtain information for the investigation process. It is of vital importance that all detectives be properly trained with the necessary knowledge and skills to make use of this valuable investigative tool. / Police Practice / M. Tech. (Forensic Investigation)

The problem that was identified is that physical surveillance is not generally used by general detectives in the South African Police Service as a technique during their investigations. According to the researcher’s experience, this can be due to lack of understanding or experience or may stem from ignorance. A lack of training on the use of physical surveillance as a method to obtain information for the investigation process was also identified as a problem. This study therefore investigated the role and use of physical surveillance within the forensic investigation process. The focus of the research was on basic static (stationary), foot and vehicle surveillance as these types of surveillance are usually conducted in conjunction with each other. An empirical research design was used to conduct the research. A qualitative research approach enabled the researcher to obtain first-hand information from interviews with general detectives. Information was also obtained from a thorough literature study and from the researcher’s own experience on the topic. To conduct effective investigation, it is important for investigators to be familiar with the concept of physical surveillance, its elements, its influence and its values. A physical surveillance operation is a forensic tool used to gather evidence, to recover stolen property, and to identify and arrest the perpetrator. The use of physical surveillance during investigations serves the purpose of gathering evidence and information that can be used as intelligence. Successful forensic investigation requires skill and places extraordinary demands on detectives to utilise all available methods and techniques. The recognition of the use of physical surveillance as a method of evidence gathering is of outmost importance. The research has revealed that general detectives do not acknowledge the importance of physical surveillance as a method to obtain information for the investigation process. It is of vital importance that all detectives be properly trained with the necessary knowledge and skills to make use of this valuable investigative tool. / Police Practice / M. Tech. (Forensic Investigation)

Submitted by Johnny Rodrigues (johnnyrodrigues@ufcg.edu.br) on 2018-04-05T19:25:23Z No. of bitstreams: 1 ALESSANDRO FERREIRA DO NASCIMENTO - DISSERTAÇÃO PPG-CEMat 2014..pdf: 1766148 bytes, checksum: 9952d3c1d40fa2b65189b5ac5fa3540f (MD5) / Made available in DSpace on 2018-04-05T19:25:23Z (GMT). No. of bitstreams: 1 ALESSANDRO FERREIRA DO NASCIMENTO - DISSERTAÇÃO PPG-CEMat 2014..pdf: 1766148 bytes, checksum: 9952d3c1d40fa2b65189b5ac5fa3540f (MD5) Previous issue date: 24-07-16 / Os fios para sutura cirúrgica são considerados produtos médicos invasivos utilizados para aproximação de tecido biológico e, devido ao contato com a pele, vasculatura e outros tecidos, são considerados um produto crítico. O presente trabalho propõe a avaliação de um dos fios com maior número de queixas técnicas notificadas à ANVISA, o fio de sutura de polipropileno, que é empregado em diversas intervenções cirúrgicas que requerem material inerte ao tecido e suporte mecânico, assim, uma avaliação da natureza físico-química do material empregado em amostras comerciais é importante para nortear um processo de certificação sanitária visando minimizar o risco aos pacientes. O fio de polipropileno foi adotado como modelo de análise , sendo escolhido o fio de número cirúrgico 0(zero) com 75cm de comprimento; foram selecionadas 4 amostras de fios de sutura de polipropileno de acordo com o padrão de notificações recebidas pela área de tecnovigilância da ANVISA como modelo para a execução de ensaios de difração de raio X, microscopia ótica, microscopia eletrônica de varredura com mapeamento por EDS, FTIR, microscopia de força atômica, análise termogravimétrica e ensaios mecânicos. Os resultados apresentados demonstraram perfis distintos nos aspectos morfológicos e mecânicos dos fios de sutura selecionados, suscitando a construção de um conjunto de análises distintas daquelas atualmente preconizadas para o registro desses produtos, assim como o estabelecimento de um processo certificador que seria realizado harmonizando parâmetros de ensaios mecânicos e caracterização morfológica dos fios de sutura, capaz de assegurar maior homogeneidade nos fios de sutura disponíveis comercialmente. / The suture threads are considered invasive medical products used for approximation of biological tissue and, due to contact with the skin, vasculature and other tissues, are considered a critical product. This paper proposes an evaluation of one of the wires with the largest number of technical complaints notified to ANVISA, the suture of polypropylene, which is used in various surgical procedures which require inert mechanical support to the tissue and thus a substantive assessment of the nature physical chemistry of the material used in commercial samples is important to guide a process of health certification in order to minimize the risk to patients. The polypropylene suture was used as the analysis model, being selected the surgical wire number 0 (zero) to 75cm long; 4 samples of polypropylene sutures were selected according to the pattern of notifications received by the area of technical surveillance of ANVISA as a model for the implementation of the testing of X-ray diffraction, optical microscopy, scanning with EDS mapping by electron microscopy, FTIR, atomic force microscopy, thermal analysis and mechanical testing. The results presented demonstrated distinct profiles on the morphological and mechanical suture wires of selected aspects, prompting the construction of a set of analyzes of those currently recommended for the registration of these products, as well as the establishment of a certification process that would be done by harmonizing testing parameters morphological and mechanical characterization of the suture capable of ensuring a greater homogeneity in the commercially available suture threads.