Field observations of the Greater Himalayan Sequence in Eastern Nepal demonstrate a ductile, highly strained package of metamorphic rocks that show extensive evidence of crustal anatexis throughout. These can be distinguished from the Lesser Himalayan sequence below by a distinct reduction in metamorphic grade, an inverted metamorphic sequence and a high strain zone corresponding to the Main Central Thrust. Metamorphic studies are combined with geochronology to demonstrate a protracted period of crustal melting followed by rapid decompression from 18.7 Ma to 15.6 Ma. A metamorphic decompression rate is quantified at c.2mm/yr during this period. This is interpreted to represent exhumation of the Greater Himalayan Sequence by a process of ductile, channelised flow from the mid-crust beneath Tibet. Below a prominent band of kyanite gneiss, previously used to locate the Main Central Thrust, but here mapped within the Greater Himalayan Sequence, partial melting is still exhibited. Here monazites are dated at 10.6 Ma. In the Lesser Himalaya below, allanites record a similar 10.1 Ma event. This implies that following channel flow during the mid-Miocene, the channel widened in the lower-Miocene to incorporate a greater structural thickness. Following these two periods of exhumation and ductile extrusion, separated in time and space, Fission Track studies indicate that much slower, erosion driven exhumation proceeded, at <1 mm/yr. This rate increases slightly in the Pliocene, most likely in response to Northern Hemisphere glaciation; no difference in exhumation is seen across the Greater Himalayan Sequence with respect to the different, earlier, phases of ductile channel flow related exhumation. These results demonstrate the episodic nature of channel flow in the Himalaya and reconcile arguments about the position of the MCT in Eastern Nepal.

In this thesis, I use multiple techniques to investigate the active faulting and deformation of the Altay Mountains, Western Mongolia. The Altay are an intracontinental transpressional mountain range, which are deforming in the far-field of the India-Asia collision. An anastomosing network of dextral faults strikes NNW-SSE, and accommodates NE-SW oriented shortening by rotating anticlockwise about vertical axes. I begin by characterising the Altay faults, and add to what is already known about their surface expression with new observations of active faulting and three previously undescribed ancient earthquake ruptures. I use ¹⁰Be cosmogenic dating and uranium-series dating on pedogenic carbonate to estimate the average Quaternary rate of slip for two of the major fault zones in the Altay. The slip rate on the Ölgiy fault is constrained to 0.3-2.1 mm/yr^-1. Results from the Hovd fault are ambiguous, demonstrating the complications encountered with application of Quaternary dating techniques. I measure palaeomagnetic directions from Cretaceous to Pliocene-aged sediments in the eastern Altay to constrain the degree of anticlockwise rotation. Results from thermal demagnetisation of specimens indicate that the eastern Altay has not undergone significant rotation, in contrast with previous studies from the Siberian Altay that reveal almost 40 degrees of anticlockwise rotation. This suggests that the eastern-most Altay fault is too young to have experienced significant rotation, or is kinematically different from the Siberian Altay. I apply apatite fission track (AFT) dating and track length modeling to the central Altay. Results from AFT dating show rapid cooling in the late Cretaceous due to the distal assembly of Central Asia, suggesting that there was pre-existing topography at the start of the Late Cenozoic phase of deformation, the timing of which is constrained to have initiated at least 20 Myr ago. My work demonstrates that combining results from techniques that cover a variety of time scales quantifies the evolution of active faulting and deformation in the region.

In this thesis I use Interferometric Synthetic Aperture Radar (InSAR) and GPS geodetic observations, along with numerical models, to examine the distribution of strain, assess seismic hazard, and study the dynamics of deformation across Turkey and Iran. I measure interseismic strain accumulation across the Ashkabad fault using InSAR, and find that atmospheric corrections using MERIS (Medium Resolution Imaging Spectrometer) data are necessary in order to retrieve the tectonic signal in the presence of large atmospheric delays. I estimate a slip rate of 5-12 mm/yr for the Ashkabad fault which is faster than previous geodetic estimates. I also attempt to validate atmospheric corrections derived from the ERA-Interim numerical weather model and find that they do not work satisfactorily for this region. I produce InSAR-derived velocity maps for five overlapping tracks in Eastern Turkey, covering both the North Anatolian Fault (NAF) and East Anatolian Fault (EAF), and measure slip rates for the NAF and EAF of 20+/-3 mm/yr and 10+/-2 mm/yr respectively. I calculate a velocity field for Eastern Turkey from these InSAR data and a compilation of GPS data, and find that strain is mainly localised across the NAF and EAF and that there is negligible differential vertical motion across the Anatolian Plateau. I construct a thin viscous sheet model for Iran and find that the GPS velocity field is well described by deformation of a ductile lithosphere. Contrary to previous suggestions, a rigid central Iran is not required to match the kinematics of Iranian deformation, but buoyancy forces acting in the lithosphere are found to play an important role. I develop a new method to assess slip rates and therefore seismic hazard on major faults in Iran from this continuum model. In this thesis I have measured slip rates across three major strike-slip faults using InSAR; the first time this has been achieved for the Ashkabad fault and the EAF. I have demonstrated the importance of atmospheric correction for these results, and have shown that Iran deforms as a continuous medium.

Not available / text

As indicated by drilling and geophysical data, the Mississippi Valley Graben, the Rough Creek Graben, together with the Rome Trough of eastern Kentucky and West Virginia, are fault-bounded graben structures filled with as much as 27,000 feet of Early to Middle Cambrian sediments. Detailed regional mapping of Cambrian and younger strata within and surrounding these structures indicates that they formed contemporaneously. The proximity of these structures suggests they developed within the same regional stress fields and tectonic environments. These three structures are mechanically and kinematically connected, and formed part of a single continent-scale rift system produced during the breakup of Rodinia and the separation of Laurentia from Amazonia. Data including stratigraphic tops from 1,764 wells, interpretations of 106 seismic profiles, aeromagnetic and gravity survey analysis, and mapped surface geology and structures were used within this project. Seven stratigraphic packages resolvable in both geophysical well logs and reflection seismic profiles were mapped in the subsurface across parts of Kentucky, Ohio, Indiana, Illinois, Missouri, and Tennessee. These stratigraphic units were then analyzed through structure maps, isopachous maps, and across 12 regional well-based cross sections. Detailed analysis of thickness patterns of seven major stratigraphic packages was used to identify the locations and timing of major fault movements within the study area. The regional patterns of fault movements through time were used to investigate how the structures evolved in response to the tectonic episodes in southeastern Laurentia during the Cambrian through Devonian Periods. Active rifting of the Precambrian crystalline bedrock began by the Early Cambrian, and resulted in a thick deposit of Reelfoot Arkose and Eau Claire Formation within the Mississippi Valley and Rough Creek Grabens, and the Rome Formation and Conasauga Group within the Rome Trough. Major tectonic extension ended by the Late Cambrian, prior to the deposition of the Knox Supergroup. Counter-clockwise rotation of the regional sigma-1 stress field between the Middle Ordovician and Early Mississippian (Taconic through Acadian Orogenies) resulted in the reactivation of varying sets of preexisting faults through time. The locations, orientations, and timing of these active faults relate to the deep architecture of the rift system.

Plate tectonic theory provides logical explanations for the major tectonic events in the eastern US during Paleozoic time. The details of these tectonic events are becoming more apparent with the accumulation of new data, especially radiometric age dates. When plate tectonic theory is applied to specific tectonic events for which there is no substantial evidence, such as intracontinental hotspot rifting environments and Precambrian subduction zones, the proposed models may become very speculative. A misconception concerning the geology of the central US is that this region is structurally stable. However, geologists are currently paying considerable attention to the interlocking network of faults that in a general way follow the 38th parallel of latitude from west-central Virginia into Central Missouri (and may extend farther to the east and west). Most of the displacement along this zone occurred during the Precambrian, but different parts have moved during several periods of post-Precambrian time. In the basement the lineament may be a wide fracture zone that extends deep into the crust and is thus responsible for the magmatic iron deposits of the Southeast Missouri and may be either directly or indirectly responsible for the localization of the Mississippi Valley type deposits that occur sporadically along its length. Whether or not plate-tectonic processes operated during the Precambrian is open to speculation and the lineament may or may not be related to plate tectonic activity, but it is obvious that throughout time inherent zones of weakness are important in the localization of ore deposits. The occurrence of several major mineral districts at the intersections of the 38th parallel lineament with other major structural features, particularly in some uplifted areas and fault zone intersections, suggests that other similar structural uplifts and fault-zone intersections should be investigated for undiscovered new districts or extensions of known districts. Small uneconomic mineral occurrences along fault zones intersecting the lineament may merit further examination as they may be indications of undiscovered deposits at depth. The overall tectonic environment in the Appalachian region was an important control on the localization of massive sulfide, gold, titanium, and tungsten deposits. The deposits occur in clusters, either in Late Precambrian spreading centers and associated rift systems related to the breakup of proto-Pangea, or in Eocambrian and Devonian low-potassium tholeiitic volcanic and plutonic rocks associated with the volcanic island arc systems which developed during the closing of the Iapetus Ocean. Feiss and Hauck (1980) are confident that moderate sized (1-10 million ton) massive sulfide deposits are yet to be found at depth in these regions of the southern Appalachians, but large (greater than 20 million ton) massive sulfide deposits are unlikely to exist. The Mississippi Valley carbonate-hosted deposits of lead-zinc-baritefluorite, that occur to some extent throughout the Paleozoic section, and the Silurian "Clinton" iron ores owe their origin and distribution to normal sedimentary and diagenetic processes resulting from the transgressions of the epeiric seas. Others, such as the residual deposits of managnese iron, and aluminum, owe their existence to the afore mentioned processes, but must also have had subsequent exposure to the concentrating mechanism of weathering in a stable environment. The Mississippi Valley type occur primarily around paleo-basement highs and paleoshorelines; therefore, the formation of domes and arches within the continental interior during bathygenic episodes was a major factor controlling the localization of these deposits. These broad upwarps were preferential sites for reefal development and facies changes, and, during epeirogenic periods, these positive features have resulted in erosion and karsting of the the carbonate rocks by meteoric waters and have thus been prepared for mineralization. Deposits of this type are most common below a pre-Middle Ordovician unconformity and should be sought along major domes and arches, and along major lineaments. The association of Applachian type deposits with arches is indeterminate because a structure as subtle as an arch would be difficult to detect following overprinting by the deformation of the Alleghany orogeny; however, there is no reason to suspect that this type of positive feature did not play a role in their location. In conclusion, plate movements were a major control on the Paleozoic tectonic history of the eastern US and were also the primary control on the localization of the base metal, gold, tungsten, chromite, and titanium deposits of the southern Appalachians. However, important sedimentary and diagenetic deposits were localized primarily by arch, dome, and basin development during bathygenic episodes. Whether these submergent episodes are the result of plate motion or whether plate motion is indirectly related to submergent episodes, as suggested by Sloss and Speed (1974), remains a problem that needs to be investigated and debated further. / KMBT_363 / Adobe Acrobat 9.53 Paper Capture Plug-in

abstract: Quantifying the temporal and spatial evolution of active continental rifts contributes to our understanding of fault system evolution and seismic hazards. Rift systems also preserve robust paleoenvironmental records and are often characterized by strong climatic gradients that can be used to examine feedbacks between climate and tectonics. In this thesis, I quantify the spatial and temporal history of rift flank uplift by analyzing bedrock river channel profiles along footwall escarpments in the Malawi segment of the East Africa Rift. This work addresses questions that are widely applicable to continental rift settings: (1) Is rift-flank uplift sufficiently described by theoretical elliptical along-fault displacement patterns? (2) Do orographic climate patterns induced by rift topography affect rift-flank uplift or morphology? (3) How do uplift patterns along rift flanks vary over geologic timescales? In Malawi, 100-km-long border faults of alternating polarity bound half-graben sedimentary basins containing up to 4km of basin fill and water depths up to 700m. Orographically driven precipitation produces climatic gradients along footwall escarpments resulting in mean annual rainfall that varies spatially from 800 to 2500 mm. Temporal oscillations in climate have also resulted in lake lowstands 500 m below the modern shoreline. I examine bedrock river profiles crossing the Livingstone and Usisya Border Faults in northern Malawi using the channel steepness index (Ksn) to assess importance of these conditions on rift flank evolution. River profiles reveal a consistent transient pattern that likely preserves a temporal record of slip and erosion along the entire border fault system. These profiles and other topographic observations, along with known modern and paleoenvironmental conditions, can be used to interpret a complete history of rift flank development from the onset of rifting to present. I interpret the morphology of the upland landscape to preserve the onset of extensional faulting across a relict erosion surface. The linkages of individual faults and acceleration of slip during the development of a continuous border fault is suggested by an analysis of knickpoint elevations and Ksn. Finally, these results suggest that the modern observed climate gradient only began to significantly affect denudation patterns once a high relief rift flank was established. / Dissertation/Thesis / M.S. Geological Sciences 2014

Salt tectonics has important implications for hydrocarbon exploration in saltbearing basins since salt deformation can directly or indirectly form hydrocarbon traps, influence hydrocarbon migration, and can control deepwater depositional systems. In various basins around the globe, extensive research has been conducted on initiation of salt mobilization, subsequent deformation, and eventual cessation, mostly from subsurface two-dimensional (2D) sections. However, 3D seismic data has dominated the petroleum industry for the last 30 years. Despite the plethora of 3D seismic data acquired in salt-bearing basins, there has been hardly any published work on the 3D geometries of complex salt bodies. 3D salt mapping in the subsurface can reveal true distribution of salt bodies and their detailed intricacies of geometrical variations, aiding in the overall salt system interpretation. Using a large 3D seismic survey (3,350 km2), this study presents the first 3D salt mapping in the Gulf of Mexico, demonstrating how 3D visualization of the entire Louann Salt system within the Middle Jurassic to presentday stratigraphy can improve interpretation of salt feeder geometries, allochthonous salt canopies, initial salt distribution, and salt weld locations in the study area.

<p>This study presents new detrital zircon geochronologic data from Jurassic to Cretaceous sedimentary basins and modern rivers in south-central Alaska in order to examine the sedimentary record of magmatism and tectonics associated with the Mesozoic to Cenozoic growth of the southern Alaska convergent margin. Jurassic to Cretaceous strata of the Wrangell Mountains, Nutzotin, and Wellesly basins formed coeval with the Mesozoic accretion of the Wrangellia composite terrane (WCT) to the continental margin. New detrital zircon data from the Wrangell Mountains and Nutzotin basins demonstrate that these basins were derived primarily from sources associated with the WCT, with little to no derivation from continental margin sources. Detrital zircon ages from the Wrangell Mountains and Nutzotin basins are very similar, suggesting that these basins may have initially formed in a connected retroarc basin system. New detrital zircon data from the Wellesly basin show that the basin was source chiefly from continental margin sources. These ages show that the Wellesly basin is not related to the Nutzotin basin as previously suggested, and may be genetically related to the Kahiltna basin; this suggests that ~330-390 km of post-collisional strike-slip offset occurred along the Denali Fault. Comparing our new data with a regional detrital zircon database from similar-aged depocenters shows that there is a strong provenance and temporal link between outboard and inboard depocenters, with these depocenters being sourced from the same magmatic arcs from the late Jurassic to the late Cretaceous. Our findings from these comparisons are most consistent with a scenario where the WCT was accreted to the margin along an eastward-dipping subduction zone, in contrast to recent suggestions that the accretion was the result of westward-dipping subduction. New and previously published detrital zircon ages from the Tanana, Matanuska-Susitna, and Copper River watersheds in south-central Alaska document the major magmatic episodes that occurred along the southern Alaska convergent margin. These magmatic episodes display a periodicity that is similar to documented cyclic magmatic patterns in other regions along the Cordilleran margin, suggesting similar processes may be occurring margin-wide. The magmatic record of south-central Alaska can also be compared with the magmatic record of other regions in the northern Cordillera such as the Coast Plutonic Complex in British Columbia and the western Alaska Peninsula, which shows a spatial and temporal relationship of magmatism along the entire northern Cordilleran margin.</p>

The rise and demise of mountain belts, caused by growth, modification, or removal of the continental lithosphere are fundamental processes that influence almost all Earth systems. Understanding the nature, timing, and significance of active processes in the creation and evolution of modern mountain belts is challenged by a lack of middle crustal and lower crustal exposures. Analogues can be found in ancient orogens, whose deeply eroded roots offer a window into deeper processes, yet this record is complicated by overprinting events and complex deformational histories. Research presented herein constrains the tectonic history of multistage Appalachian Orogen, type locality of the Wilson cycle. Data-driven analysis of newly assembled geochronologic, geochemical, and geothermobarometric databases are synthesized with structural fabrics and geophysical imaging to constrain the timing and nature of crustal thickening and thinning events. Results identify a two-stage crustal thickening history in the dominant Acadian Orogeny and suggest the existence of a high elevation, low relief orogenic plateau. This plateau, the Acadian altiplano, formed in central and southern New England by ca. 380 Ma and exited for at least 50 m.y. until underwent orogen parallel collapse ca. 330-310 Ma. Collapse of the plateau likely formed the geophysically observed 12-15 km offset in Moho depth in western New England, and implies that the step has existed for ca. 300 m.y. These data constrain a four-dimensional record of crustal evolution over a period exceeding 100 m.y. Recognition of the Acadian altiplano may have important implications for the genesis of critical Li deposits, paleoclimate, and evolution of the Appalachian basin. Further, present a region that may provide an analogue for studying mid-crustal processes such as partial melting, ductile flow, and plutonism underneath modern plateaus.