Thesis (PhD)--Stellenbosch University, 2012. / See full text for abstract. / Sien volteks vir opsomming

Thesis (PhD)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: In this thesis, the recovery of RhIII from both synthetically prepared and authentic industrial PGM-containing solutions was systematically investigated via organic precipitation methods using several commercially available, N-containing organic receptors including (amongst others) diethylenetriamine (Deta), triethylenetetramine (Teta), tetraethylenepentamine (Tepa) and tris(2-aminoethyl)amine (Tren). These organic receptors act as precipitating agents in the presence of an appropriate protonating agent (HCl) by lowering the solubility of the PGM chlorido-anions through an ion-pairing mechanism. The recovery of RhIII from synthetically prepared PGM (RhIII and PtIV) containing solutions using these precipitants was excellent, while poor Rh recovery from authentic industrial process solutions was achieved. The poor Rh recovery from these process solutions was ascribed to the species distribution of the [RhCln(H2O)6-n]3-n complexes. In order to validate the proposition that RhIII speciation effects are responsible for the poor Rh recovery observed during the precipitation studies, attempt were made to describe the species distribution of the [RhCln(H2O)6-n]3-n (n=3-6) by means of high-resolution 103Rh NMR spectroscopy. A detailed high-resolution 103Rh NMR spectroscopic study of the series of [RhCln(H2O)6-n]3-n (n=3-6) complexes was conducted. During this study, all six RhIII aqua chlorido-complexes have unambiguously been characterized by means of high-resolution 103Rh NMR spectroscopy, proving the powerful analytical capability of this technique. Characterization of these complexes is based on the detailed analysis of the 35Cl/37Cl isotope effects which is observed in the 19.11 MHz 103Rh NMR resonances of the [RhCln(H2O)6-n]3-n (n=3-6) complexes in aqueous HCl solutions at 292 K. These resonances show that the “finestructure” of each of the 103Rh resonances may be understood in terms of its unique isotopologue, and in certain cases, the isotopomer distribution of each complex, which manifests as a result of its statistically expected 35Cl/37Cl isotopologue and isotopomer distributions. As a result, the 103Rh NMR resonance structure serves as a unique “NMRfingerprint”, which allows for the unambiguous assignment of [RhCln(H2O)6-n]3-n (n=3-6) complexes, without the reliance on accurate δ(103Rh) chemical shifts. Furthermore, this study reports the first direct species distribution diagram for the [RhCln(H2O)6-n]3-n (n=3-6) series of complexes (in aqueous HCl solutions at 292 K) as a function of the “free” (unbound) chloride concentration, constructed from 103Rh NMR measurements. The need for a revised speciation diagram of [RhCln(H2O)6-n]3-n (n=3-6) complexes is clearly reflected by the vast differences observed in the literature reported species distribution diagrams, which makes it difficult to decide which set of experimental conditions (if any) is required for the quantitative and “selective” recovery of RhIII from aqueous HCl solutions containing associated PGMs (Pt, Pd, Ir, Ru) as well as other transition metals. The documented species distribution diagrams for RhIII have been generally constructed via data from indirect (kinetic and spectrophotometric) measurements using dilute RhIII solutions at relatively high HCl concentrations, which implies that the RhIII:Clmole ratio is higher than what may be expected in authentic process solutions – an important aspect to consider when optimizing RhIII recovery methods. In addition, RhIII kinetic investigations reported in this study shows that ionic strength and temperature effects are important factors that dramatically influences the rate of RhIII ligand exchange (i.e. RhIII aquation reactions) which, in turn, have contributing effects on the species distribution of [RhCln(H2O)6-n]3-n complexes. Notable differences exist between the speciation diagram reported in this study and those documented in literature, especially at a “free” chloride concentration of 1.0 M. At this “free” chloride concentration, the [RhCl5(H2O)]2- complex anion was found to have an abundance of 34%, while literature reports an abundance of 80%. In order to ascertain its practical relevance, the proposed 103Rh NMR speciation method was extended, for the first time, to authentic industrial Rh feed solutions (Anglo Platinum PLC). Each of the 103Rh resonances was unambiguously assigned, and each species quantified. Moreover, the RhIII species distribution of the industrial Rh feed solution was accurately predicted by the “direct” speciation diagram constructed form 103Rh NMR measurements. After careful optimization of the Heraeus industrial feed solutions (optimal chloride concentration followed by thermal treatment for enhancing RhIII chloride anation reactions), the recovery of Rh via precipitation was repeated. In this instance, Rh recovery improved dramatically, with up to 95% of Rh removed from solution. This improvement is ascribed primarily to the increased “free” (unbound) chloride concentration. The presence of associated PGMs as well as other transition metals would lower the effective “free” chloride concentration, since these metals would act as “chloride binders”. By adjusting the total chloride concentration, RhIII chloride anation reactions is enhanced which leads to the [RhCln(H2O)6-n]3-n (n=5,6) complex anions being the dominant species in solution, therefore leading to improved Rh recovery. Moreover, it was shown that, under carefully controlled conditions, “selective” recovery of Rh is achieved using tris(2-aminoethyl)amine (Tren). Considering the fact that Rh is the last precious metal recovered in all PGM refineries, this can possibly provide a cost-effective route for the “upfront” (early stage) recovery of Rh from industrial PGM feed solutions. / AFRIKAANSE OPSOMMING: In hierdie tesis word die herwinning van RhIII uit laboratorium voorbereide sowel as ware industriële PGM-bevattende oplossings sistematies ondersoek deur middel van organiese neerslag metodes, deur gebruik te maak van verskeie kommersieël beskikbare, Nbevattende organiese reseptore insluitende dietileentriamien (Deta), tri-etileentetramien (Teta), tetra-etileenpentamien (Tepa) en tris(2-aminoetiel)amien (Tren). Hierdie organiese reseptore tree op as neerslag-agente in die teenwoordigheid van 'n geskikte protoneringsagent (in hierdie geval HCl) deur 'n verlaging van die oplosbaarheid van die PGM chloriedanione deur middel van 'n ioon parings meganisme. Die herwinning van RhIII vanuit laboratorium voorbereide PGM (RhIII en PtIV) oplossing met behulp van hierdie organiese neerslag-agente was uitstekend, terwyl Rh herwinning vanuit ware industriële oplossings swak was. Die onvolledige Rh herwinning uit hierdie industriële oplossings word toegeskryf aan die spesie-verspreiding van die [RhCln(H2O)6-n]3-n komplekse. Ten einde die effek van RhIII spesie-verspreiding op die herwinning van Rh te bestudeer, is gepoog om die spesieverspreiding van [RhCln(H2O)6-n]3-n (n=3-6) komplekse, deur middel van hoë resolusie 103Rh KMR spektroskopie, te beskryf. 'n Gedetailleerde hoë resolusie 103Rh KMR spektroskopiese studie van die reeks van [RhCln(H2O)6-n]3-n (n=3-6) komplekse was uitgevoer. Tydens hierdie studie was al ses RhIII aqua chlorido-komplekse ondubbelsinnig gekarakteriseer deur middel van hoë resolusie 103Rh KMR spektroskopie, wat bewys lewer van die kragtige analitiese vermoë van hierdie tegniek. Karakterisering van hierdie komplekse is gebaseer op die gedetailleerde analise van die 35Cl/37Cl isotoop effekte wat waargeneem word in die 19.11 MHz 103Rh KMR resonansies van die [RhCln(H2O)6-n]3-n (n=3-6) komplekse in HCl oplossings by 292 K. Hierdie resonansies toon dat die "fyn struktuur" van elk van die 103Rh resonansies verstaan kan word in terme van die unieke isotopoloog, en in sekere gevalle, die isotopomeer verspreiding van elke kompleks, wat manifesteer as 'n gevolg van die die statisties verwagte 35Cl/37Cl isotopoloog en isotopomeer verspreiding. Die 103Rh KMR resonansie-struktuur kan sodoende dien as 'n unieke "KMR-vingerafdruk", wat voorsiening maak vir die ondubbelsinnige karakterisering van [RhCln(H2O)6-n]3-n (n=3-6) komplekse, sonder om vertroue op akkurate δ(103Rh) chemiese verskuiwings te plaas. Hierdie studie rapporteer verder die eerste direkte spesie-verspreiding-diagram vir die [RhCln(H2O)6-n]3-n (n=3-6) reeks komplekse (in HCl oplossings by 292 K) as 'n funksie van die "vrye"(ongebonde) chloried-konsentrasie, verkry van 103Rh KMR metings. Die behoefte vir 'n aangepasde spesiasie-diagram vir die [RhCln(H2O)6-n]3-n (n=3-6) komplekse word duidelik weerspieël deur die groot verskille waargeneem in die literatuur gerapporteerde verspreidings diagramme, wat dit moeilik maak om te besluit watter stel eksperimentele toestande (indien enige) benodig word vir die kwantitatiewe en “selektiewe” herwinning van RhIII in HCl oplossings in die teenwoordigheid van gepaardgaande PGM (Pt, Pd, Ir, Ru) sowel as ander oorgangsmetale. Die gedokumenteerde spesie-verspreiding-diagramme vir RhIII is oor die algemeen verkry via data vanaf indirekte (kinetiese en spektrofotometriese metings) deur gebruik te maak van verdunde RhIII oplossings in relatiewe hoë HCl konsentrasies, wat impliseer dat die RhIII:Cl mol verhouding hoër is as wat verwag kan word in ware industriële proses oplossings - 'n belangrike aspek om te oorweeg gedurende die optimalisering van RhIII herwinning-metodes. Verder, die RhIII kinetiese ondersoeke gerapporteer in hierdie studie toon dat ioniese sterkte sowel as temperatuur effekte belangrike faktore is wat die tempo van RhIII ligand uitruiling (d.w.s. RhIII “aquation” reaksies), wat ‘n betekenisvolle invloed hê op die spesie-verspreiding van [RhCln(H2O)6-n]3-n komplekse. Aansienlike verskille bestaan tussen die spesiasie-diagram gerapporteer in hierdie studie en dit gedokumenteer in die literatuur, veral by 'n "vrye" chloried-konsentrasie van 1.0 M. By hierdie "vrye" chloried-konsentrasie was die [RhCl5(H2O)]2- komplekse anioon gevind om in 34% teenwoordig te wees (hierdie studie), terwyl die publiseerde verslae 80% rapporteer. Ten einde die praktiese toepaslikheid van die voorgestelde 103Rh KMR spesiasiemetode te bepaal, was (vir die eerste keer) ware industriële Rh oplossings (Anglo Platinum PLC) gebruik. Elk van die 103Rh resonansies was ondubbelsinnig gekarakteriseer, en elke Rh spesie teenwoordig gekwantifiseer. Daarbenewens is die RhIII spesie-verspreiding van die industriële Rh oplossing deur die "direkte" spesiasie-diagram saamgestel vanuit 103Rh KMR metings akkuraat voorspel. Die berekende RhIII spesie-verspreiding van die industriële Rh oplossings was akkuraat voorspel deur die voorgestelde “direkte” spesiasie-diagram soos saamgestel vanuit die 103Rh KMR metings. Na deeglike optimalisering van Heraeus industriële oplossings (optimale chloriedkonsentrasie gevolg deur termiese behandeling vir effektiewe RhIII chloried anasie reaksies), is die herwinning van Rh via neerslag metodes herhaal. In hierdie geval, het die Rh herwinning dramaties verbeter, met tot 95% van die Rh uit oplossing verwyder. Hierdie verbetering is hoofsaaklik toegeskryf aan die verhoogde "vry" (ongebonde) chloriedkonsentrasie. Die teenwoordigheid van geassosieerde PGM's sowel as ander oorgangsmetale sal die effektiewe "vrye" chloried-konsentrasie verlaag, aangesien hierdie metale sou optree as "chloried-binders". Deur die aanpassing van die totale chloried-konsentrasie, word RhIII chloried anasie reaksies verbeter, wat daartoe lei dat [RhCln(H2O)6-n]3-n (n = 5,6) komplekse anione die dominante spesies in oplossing word, en dus lei tot verbeterde Rh herwinning. Daarbenewens word verder aangetoon dat, onder noukeurig gekontroleerde voorwaardes, "selektiewe" herwinning van Rh bereik word deur gebruik te maak van tris(2-aminoetiel)amien (Tren). Met inagneming van die feit dat Rh die laaste edelmetaal is wat verhaal word in alle PGM-raffinaderye, kan dit 'n koste-effektiewe roete word vir die "vooraf" (vroeë-stadium) herwinning van Rh vanuit industriële PGM bevattende oplossings.

Thesis (MSc)--Stellenbosch University, 2012. / Please refer to full text for abstract.

Waste minimisation involves reducing waste (emissions, effluent, solid waste) in companies, at source. v 7, 8 Its benefits include cost savings, environmental improvement, increased throughput and risk and liability reduction. 7, 8, 13 Through implementation of a structured waste minimisation programme, companies can identify waste minimisation opportunities: broad focus areas that will benefit from a more detailed waste minimisation assessment. More specific waste minimisation solutions can then be identified. In this study, the waste minimisation opportunity was identified by the company, Ben Booysen, a priori. Ben Booysen is a local air-conditioning and refrigeration company in Pietermaritzburg, which services air-conditioner units. They identified the waste minimisation opportunity of optimising the process conditions for cleaning the airconditioner units. At the time at Ben Booysen, Alukleen, an acid cleaner (RT Chemicals®, RTCM 64) , was applied manually (by a paintbrush) at an effective dilution of 1:3 to clean the aluminium air-conditioner coils. Handy Andy and green soap were used to clean the plastic covers of the units. Concerns about the effluent, cost and safety of handling Alukleen led to their identification of this waste minimisation opportunity. The initial objectives of this project were thus the qualification and quantification of the species present in Alukleen; the quantification of the species present in the Ben Booysen effluent and the subsequent comparison of these values to limits for disposal to stormwater and Darvill. A further objective was the optimisation of the cleaning system with regard to Alukleen concentration and contact (soaking) time. Wet chemical analysis was employed as a qualitative tool for identification of the components present in Alukleen. This analysis indicated that fluoride, sulfate, sulfide, arsenite and chloride ions are present in Alukleen. Further quantitative analysis using the Ion chromatograph, the ICP-OES and a fluoride ion selective electrode indicated that only sulfate (152600 ppm) and fluoride (25400 ppm) are present in significant quantities. Studies were conducted on aluminium coil pieces in which both the contact (soaking) times and Alukleen concentrations were varied. These tests indicated that the effect of soaking time on the cleanliness achieved was negligible. Although a greater amount of dirt was removed when using more concentrated Alukleen solutions, etching of the metal occurred at higher concentrations, resulting in a loss of sheen and malleability of the metal. Etching of the aluminium air-conditioner coils by Alukleen, as indicated by both digital photography and electron microscopy, resulted in extending the objectives of this project to include the investigation of alternative aluminium cleaners. Hence, the cleaning action of three degreasers was investigated: Powerkleen (RT Chemicals®, RTCMI23), Technicians' Choice (Auto Brite (PTY) Ltd.) and Klengine (Auto Brite (PTY) Ltd.) . Powerkleen was found to be the most effective degreaser and did not compromise the metal's sheen or malleability. Further studies were then conducted to characterise the major components ofPowerkleen and to optimise its use with regard to concentration and contact (soaking) time. The suitability oftwo methods of application was also tested. The main component of Powerkleen, determined through the use of ICP-OES, was found to be potassium hydroxide, present at a concentration of 0.711 M. The optimum Powerkleen concentration range for cleaning the aluminium coils was found to be between a 1:20 and 1:40 dilution. Contact (soaking) time of Powerkleen with the aluminium coils was found to have a negligible effect on the mass of dirt removed by the degreaser. Application of the Powerkleen to the aluminium coils by an air gun at a pressure of 4 bars (for units serviced at Ben Booysen) and by a pump bottle (for units serviced in industry) were both found to achieve an acceptable degree of cleanliness of the aluminium. A feasibility analysis (technical , economical and environmental) indicated that a 1:40 dilution of Powerkleen is a feasible, cost-effective and environmentally compliant alternative to Alukleen. Implementation of the Powerkleen cleaning system would result in a R5030 annual saving with a payback period of 5.9 months and an internal rate of return of 214.9%. It would further eliminate the fluoride effluent problems associated with Alukleen and reduce the quantity of chemical raw materials required for the process from 2100 Llannum to 260 Llannum. In industry, an effective dilution of 1:39 would be used for the sake of eas y dilution. A 1:79 dilution of Powerkleen was also found to be a feasible replacement for Handy Andy and green soap in the cleaning of the plastic covers of the units. / Thesis (M.Sc.)-University of Natal, Pietermaritzburg, 2003.

Two coal utility plants in South Africa selected (one from Sasol and another from Eskom) for this study produce large volumes of fly ash (over 40 Mt from Eskom at Tutuka, and 3 Mt from Sasol Synfuels at Secunda annually), and brines as by-products during coal processing. Co-disposal of the brines and fly ashes has been a normal practice in these coal-utility plants for decades. Long-term management of fly ash is necessary and requires an understanding and knowledge of how the different waste materials interact with water and brines in different chemical situations. However the geochemistry of their interactions, the leaching and mobility of elements in these disposal systems has not been fully understood. This work gives insights into the chemical processes taking place in the brine-water/brines systems that govern the concentrations of major and minor elements in ash leachates under different environmental conditions. The possible presence of organic compounds (subsequently referred to as 'organics') in brines and their effects on the leaching chemistry of fly ash was also studied. Sustainability and long term impact of the co-disposal of fly ash and brines on the environment was studied through static (batch tests) modeling of the pH-dependent acid neutralization capacity (ANC) tests and columns modeling for dynamic leach tests. The modeling was based on experimental results from other Sasol-Eskom ashbrine project collaborators. Modeling results of the ANC tests were in good agreement with the reported experimental results, which revealed that the release trends of various elements (including trace, heavy elements and contaminants) contained in fly ash into solution is highly pH dependent. However Na, K, Mo and Li exhibited constant solubilisation which was independent of pH changes from all the scenarios. The presence of different constituents of brines subjected to ANC resulted to different ANC capacities ranging from 0.98 moles H⁺/Kg dry ash (of ash-organics mixed with Mg-brines) to 3.87 H⁺/Kg dry ash for those with the C(4) brines. As expected, those constituents from the cationic brines were found on the lower region of acid addition (in the order Mg-brines < Ca-brines < Na-brines) while the anionic brines were found at the upper region of acid addition (in the order S(6)-brines < Cl-brines < C(4)-brines). In the middle region of acid addition were three important scenarios: that of ash with brine, ash without brines (i.e. ash with DMW) and ash with both ASW organics and combined brines. It was from these three scenarios that a generalization of the effect of brines and organics on the ANC was inferred. The ANC of ash with demineralised water (DMW) was 2.33 mol H⁺/Kg dry ash and that of ash with ASW organics lower at 2.12 mol H⁺/Kg dry ash which was the same value as that of ash with combined brines. This indicated that brines decreased the ANC of ash by about 9.01 % and which could be attributed to the acid-base neutralization process and the dynamics of solid phase dissolutions in response to the acid addition. Both fly ashes exhibited a typical pH > 12 (suspension in demineralised water) and the predominant cation even at this high pH is Ca²⁺ (at concentration > 0.002 mmol/L). This indicates that dissolution of CaO and formation of OH⁻ species at pH > 10 contributes to acid neutralisation capacity of both fly ashes and is the greatest contributor to the acid neutralizing capacity of both fly ashes. Two broad leaching behaviours as a function of pH were observed from the three fly ash-ASW organics-brines scenarios (i) leaching of Ca, Mg, Ni and Sr follows a cationic pattern where the concentration decreases monotonically as pH increases; (ii) leaching of Al, Fe, Ti and Zn follow an amphoteric pattern where the concentration increases at acidic and alkaline pH, although Al showed some anomaly from pH 11 where the concentration decreased with the increase in pH. Al showed an amphoteric pattern in which its release increased between pH 12.8 and 11 for all the scenarios and then decreased with decrease in pH down to neutral pH of 7. The batch leaching simulation results from hydrogeochemical modeling also showed that mineral dissolution, precipitation and new phase formation during ash-organics-brines interactions was controlled by pH. The newly formed phases however remain in equilibrium with the ash-brines-organics mixture. Each individual mineral phase dissolution/precipitation/formation system controls the concentration and speciation of the respective constituent elements as evidenced by the log C-pH diagrams obtained from the modeled scenarios. The ash-brines-organics interactions do exhibit and affect the mineralogical chemistry of fly ash. However the extent to which these interactions occur and their effect, varies from one scenario to another, and are dependent on the amounts and type of the constituent brine components. Organics do have a significant effect on dissolution characteristics of few minerals such as calcite, mullite, kaolinite, Ni₂SiO₄, and SrSiO₃ due to complexation effect. The effect is quantitatively conspicuous for calcite mineral phase and for the formation of some new phases such as Fe(OH)₃(am)-CF and portlandite. The composition of the liquid phase from acid neutralisation capacity experiments was successful.Hydrogeochemical modeling was used as a means to provide insights and understanding of the complex reactions taking place, speciation and mineralogical changes occurring. These changes would serve to predict future environmental scenarios when pH conditions change. In this study, an extension of the application field of PHREEQC hydrogeochemical code for modeling and simulation of equilibrium; kinetic and transport mechanisms associated with the interaction of water; and organics and brines with fly ash during their co-disposal is successfully demonstrated. The parameters associated with these mechanisms were used as inputs into the PHREEQC program using modified Lawrence Livermore National Laboratory (LLNL) database for inorganic brines and MINTEQ.V4 database for organics, and used to model the results of ANC test data for the fly ashes. A special reference is made to two separate modeled mineralogical ash recipes from two of the South African power utility plants' fly ash systems, namely, Tutuka and Secunda. The effects of brines in the leaching of major, minor and trace elements at various pH values and the mineralogical changes associated with the intermediate and final products from the interactions of ash-brines systems under different scenarios are qualitatively and quantatively discussed. Multiphase saturation characteristics have been determined for mineral species in contact with water and brines. The modeling results indicated that several mineral phases could be controlling the species concentration in the leachates, and the ANC and column modeling results corroborated well in many aspects with the experimental results obtained from collaborating institutions (South Africa Universities and Research institutions). In addition, application of the PHREEQC model to the ash heap under different disposal systems was carried out to predict the heap leachate composition and geochemical transformations taking place in a period of time. Pore water chemical analysis, and moisture content analysis revealed that contact of the ash with water is a crucial factor in the mobilization of the contaminants with time. Maximum weathering/dissolution of the ash is observed in the top layer (1-3) m and at the point of contact with the subsurface water level which was in good agreement with the model results. The surface layer and the very lowest layers of the dump in contact with lateral flows experience the highest degree of weathering leading to depletion of species. The geophysical transformation of fly ash was also captured through the porosity change calculations and the results revealed that geochemical reactions do affect the porosity of fly ash during the weathering processes. These modelling results were in agreement with the hydraulic tests and salt leaching tests conducted during Sasol-Eskom ashbrine project in Phase I which suggested that salts captured in the ash will become mobile and leach from the fly ash over time. The data therefore indicates that ash dumps may not act as sustainable salt sinks. These findings may have some bearing on engineering decisions on fly ash reuse. From the above observations, it is apparent that release of large quantities of the salts in the ash depends on the extent of its interaction with brines being used for irrigation or with water, either through plug-in flow after a rainfall event or contact with groundwater. The results revealed effects of brine-water contact time with fly ash, the flow volume and velocity, the pH, the degree of saturation, hydrogeology and ash heap geometry as important factors that affect fly ash transformation and weathering. Overall, the ash heap modeling enhanced the understanding of the ash-brines interactions and demonstrated that leachate composition is determined by the following factors; (i) the mass flows from the pores of fly ash, (ii) the surface dissolution of the mineral phases, (iii) the various chemical reactions involved during the ash-brine and ash-water interactions, (iv) the interactions with a gas phase (atmospheric CO₂), (v) the composition of the initial fly ash, and (vi) by the leachate flow and hydrodynamics as captured in the conceptual model. Any ash handling system should therefore be designed to take these criteria into consideration to prevent environmental contamination. The modeling results also gave indications that the ash-brine co-disposal in dry ash systems would be an unsustainable way of locking up brine salts in the long run. In this Thesis, modeling results were used to support experimental data which further reaffirmed the important role hydrogeochemical modeling plays in liquid and solid waste management. Furthermore, hydrogeochemical modeling complements the work of analytical/environmental scientists as well as guiding the future solid waste management and engineering decisions. / Thesis (Ph.D.)-University of KwaZulu-Natal, Westville, 2012.

Ab initio molecular orbital theory has been successful in predicting the stabilities of many weak complexes; typical of these are the complexes formed between water and various small molecules. To account for the correlation effect, Moller-Plesset perturbation theory truncated at the second order level was employed. In order to account for the hydrogen bonding, the 6-3lG** basis set was used. The geometry optimisations of the complexes were carried out using the Gaussian-92 suite of programs installed on a Hewlett-Packard 720 computer operating under UNIX. The interaction energies of the complexes were subjected to further analysis by applying the Morokuma decomposition scheme. The electrostatic interaction component accounts for over 40% of the total stabilisation energy in all the typical hydrogen bonded complexes. Gas phase enthalpies were computed and compared with the experimental values of similar systems. For the systems studied here, the prediction is that all complexes are stable at 25° C. A second program, Vibra, was used for carrying out a normal coordinate analysis. A third computer program for the graphical representation of molecular and crystallographic models, Schakal-92, was employed to illustrate the predicted equilibrium geometries and the fundamental vibrational modes. The predicted geometries, interaction energies, charge redistributions, vibrational wave numbers, infrared intensities and force constants are listed and compared with those in the literature, where applicable. Correlations between the various predicted properties show some interesting chemistry. / Thesis (Ph.D.)-University of Natal, Durban, 1996.

Ingestion of extracts prepared from various medicinal plants to induce or augment labour is common amongst Black South African women during the late stages of pregnancy. This applies particularly to the rural areas where modern health care facilities are often lacking. Many of these plants have not been investigated scientifically and one needs to substantiate claims of quality, safety and efficacy. Furthermore, it is believed that the consumption of these plant extracts can result in foetal meconium staining at delivery. An investigation into the uterotonic properties of three plants viz. Ekebergia capensis Sparrm. Clivia miniata (Lindl.) Regel. and Grewia occidentalis L. were carried out using guinea pig uterine smooth muscle in vitro. Supercritical fluid extraction was performed with water modified supercritical carbon dioxide to extract the uterotonic components. An attempt was also made to couple supercritical fluid extraction directly on-line to the bioassay so that on line screening of crude plant extracts could be performed within short periods of time. The effects of supercritical CO2 decompression on temperature and pH of the muscle bathing solution were considered since these factors affect muscle contractility. The direct effects of excess CO2 on intracellular mechanisms were eliminated by constructing a CO2 reduction interface together with passage of carbogen which aided in the rapid displacement of excess CO2, As samples of these extracts were found to induce muscle contraction, supercritical fluid fractionation (SFF) was performed by sequentially increasing the fluid density. Extracted fractions were obtained by sequentially increasing the pressure at constant temperature and modifier concentration in an attempt to identify the active fractions. Extractions were performed at 200 atm, 300 atm and 400 atm respectively. Subsequent testing of these fractions enabled the detection of active and inactive fractions as well as a fraction that had a spasmolytic effect on uterine muscle. The 400 atm extracts of E. capensis and C. miniata displayed maximum activity while only the 300 atm extract of G. occidentalis induced uterine muscle contraction. Subsequent analysis of the sequentially extracted fractions, by high performance liquid chromatography and micellar electrokinetic capillary chromatography revealed that certain compounds present in the fractions that stimulated muscle contraction, were sensitive to the extraction pressure hence making it possible to determine the compounds that were likely to be active. Column chromatography followed by various spectroscopic techniques were performed in an attempt to isolate and elucidate the structures of the compounds that were present in the plant extracts. The extract of Ekebergia capensis yielded five known compounds (B-sitosterol, oleanonic acid, 3-epioleanolic acid, 2,3,22,23-tetrahydroxy-2,6,1 0, 15,19 ,23-hexamethyl-6, 10, 14, 18- tetracosatetrene and 7-hydroxy-6-methoxy coumarin. The extract of Clivia miniata yieded linoleic acid and 5-hydroxymethyl-2-furancarboxaldehyde while the extract of Grewia occidentalis yielded 3-(4-hydroxy-3-methoxyphenyl)-2-propenal, a novel compound 2,2' ,6,6'-tetramethoxy-4'-al-4-(w-oxo-E-propenyl)-biphenyl and oleanonic acid. The pure compounds were further evaluated pharmacologically to identify the active components and assess the physiological mode of action by the use of various receptor blockers. Oleanonic acid, 3-epioleanolic acid, linoleic acid and 5- hydroxymethyl-2-furancarboxaldehyde and 3-(4-hydroxy-3-methoxyphenyl)-2-propenal were found to induce an agonistic muscle response. All these compounds were observed to mediate their effects through the cholinergic receptors. The results obtained in this study supports the claim of these plants possessing uterotonic properties. / Thesis (Ph.D.)-University of Natal, Durban, 1997.

Thesis (MSc (Chemistry and Polymer Science))--University of Stellenbosch, 2009. / ENGLISH ABSTRACT: This thesis reports an in-depth investigation of the intermolecular interaction motifs in secondary, primary and ammonium carboxylate salts. The investigation was conducted using the Cambridge Structural Database (CSD), together with a systematic steric-specific experimental study. The tendency in the literature has been to analyse organic salt crystal structures in terms of hydrogen bonding patterns, almost ignoring cation-anion interactions. This study focuses on the cation-anion interactions in secondary, primary and ammonium carboxylate salts, which have a direct effect on the formation of specific structural motifs. The ideas of ring-stacking and ring-laddering, which arise from the tendency of cations and anions to arrange themselves so as to maximise electrostatic interactions, have been applied to ammonium carboxylate salts. An extensive survey of organic ammonium carboxylate salt structures in the CSD has been carried out. The structural motifs in ammonium carboxylates were investigated, and a set of predictive rules for the pattern of intermolecular interactions in these salts was developed. Using these results, the formation of ring-stacking or ring-laddering in primary ammonium carboxylate salts can be predicted. The results from the CSD survey are discussed in Chapter 3. An experimental study has been carried out, which complements the results obtained from the CSD survey. The experimental study formed 19 novel ammonium carboxylate salts, of which 2 formed hydrates and 2 co-crystals of salts. The experimental results confirm what was found in the CSD survey, and this is discussed in Chapter 4. This study has found that the principle of ring-stacking and ring-laddering can be applied in a general form to the crystal structures of organic ammonium carboxylate salts. The size of the cation and the anion in these salts has a significant effect on the formation of structural motifs in the solid state. Interactions between cation and anion substituents also play an important role in the formation of particular structural motifs in ammonium carboxylate salts. / AFRIKAANSE OPSOMMING: In hierdie tesis word die intermolekulêre interaksie motiewe in die sekondêre, primêre en ammonium karbosilaat soute in-diepte ondersoek. Die studie is gedoen met behulp van die Cambridge Strukturele Databasis (CSD), saam met ‟n sistematiese steriesspesifieke eksperimentele studie. Die neiging in die literatuur is om organiese sout kristal strukture in terme van waterstofbindings patrone te analiseer sonder om katioon-anioon interaksies in ag te neem. Die studie fokus juis op hierdie katioon-anioon interaksies tussen sekondêre, primêre en ammonium karbosilaat soute wat ‟n direkte effek het op die vorming van spesifieke strukturele motiewe naamlik „ring-stacking‟ en „ring-laddering‟ wat hul oorsprong kry vanaf die neiging van katione en anione om hulself op so ‟n wyse te rangskik sodat die elektrostatiese interaksies ‟n maksimum kan bereik, op die ammonium karboksilaat soute. ‟n Volledige ondersoek van ammonium karboksilaat soute in die CSD is gedoen. Die strukturele motiewe in ammonium karboksilaat is ondersoek, en ‟n stel reels wat die patrone van intermolekulêre interaksies in hierdie soute voorspelis ontwikkel. Hierdie resultate kan gebruik word om die vorming van „ring-stacking‟ en „ring-laddering‟ in primêre ammonium karbosilaat soute te voorspel. Die resultate van die CSD ondersoek word bespreek in Hoofstuk 3. ‟n Eksperimentele studie is uitgevoer en die resultate hiervan komplimenteer die resultate van die CSD ondersoek. In die eksperimentele studie is 19 nuwe ammonium karboksilaat soute gekristaliseer, waarvan 2 hidraat-soute en 2 ko-kristal-van-soute is. Die eksperimentele resultate bevestig die bevindings van die CSD ondersoek, en dit word bespreek in Hoofstuk 4. Hierdie studie het gevind dat die beginsel van „ring-stacking‟ en „ring-laddering‟ kan in „n algemene vorm in die kristal strukture van organiese ammonium karboksilaat soute toegepas word. Die grootte van die katioon en anion in hierdie soute het ‟n beduidende effek op die vorming van strukturele motiewe in die vaste toestand. Interaksie tussen die katioon en anioon substituente speel „n belangrike rol in die vorming van spesifieke motiewe in ammonium karbosilaat soute.

Thesis (PhD (Chemistry and Polymer Science))--University of Stellenbosch, 2009. / ENGLISH ABSTRACT: The present study was initiated by the wine industry of South Africa to overcome the lack of available information on the flavor and aroma of South African wines. The aim was to develop new analytical methods and improve existing ones for the analysis of volatile compounds in the South African wines. Initially a new analytical method based on stir bar sorptive extraction (SBSE) in the headspace mode for the analysis of 37 pre-selected volatile compounds was developed and validated. Consequently, the method was improved by making important modifications and increasing the number of compounds analyzed to 39. This method was successfully applied to a large number of Pinotage wines of vintages 2005 and 2006. The quantitative data of these wines were subjected to chemometric analysis in order to investigate possible co- /variances. A clear distinction was observed between the two vintages, where the 2005 wines were more characterized by wood-related compounds and the 2006 wines by the fermentation compounds. The developed method was further applied to other cultivars of vintage 2005, including two white (Sauvignon Blanc and Chardonnay) and three red (Shiraz, Cabernet Sauvignon and Merlot) cultivars. In a similar fashion, the quantitative data of the six cultivars of vintage of 2005 were analysed by chemometric methods. Significant differences were observed between the two white cultivars and among the four red cultivars. It was shown that among these cultivars, the major role-players were the wood and fermentation related volatiles. A striking observation was the confirmation of the unique character of the Pinotage wines compared to the other red cultivars, mainly influenced by the high level of isoamyl acetate and low level of isoamyl alcohol, the former being categorized as a varietal compound for Pinotage expressed by a fruity (banana) odor. In addition, advanced chromatographic technology in the form of comprehensive twodimensional gas chromatography (GC × GC) coupled to time-of-flight mass spectrometry (TOFMS) was investigated for the detailed analysis of volatile compounds in young South African wines. This work focused primarily on Pinotage wines. In the first instance, solid phase micro extraction (SPME) in the headspace mode in combination with GC × GC-TOFMS was used. Due to the high resolution and large peak capacity of GC × GC, more than 200 compounds previously reported as wine components were identified. These compounds were dominated by the highly volatile and less polar compounds, mainly due to the characteristics of SPME. In an attempt to further extend these results, another selective extraction method, solid phase extraction (SPE) was used in combination with GC × GC-TOFMS analysis. Using this technique, more than 275 compounds, most of them unidentified using the previous method, were detected. These groups of compounds include volatile phenols, lactones as well as mostly aromatic esters and norisoprenoids, which can potentially influence the aroma and flavor of wine. The techniques developed as part of this study have extended our knowledge of the volatile composition of South African wines. / AFRIKAANSE OPSOMMING: Hierdie studie is geïnisieer deur die wyn industrie van Suid-Afrika om die tekort aan beskikbare inligting aangaande wyn aroma van Suid-Afrikaanse wyne te oorkom. Die doel was om nuwe analitiese metodes te ontwikkel en die huidige metodes te verbeter vir die analise van vlugtige verbindings in Suid-Afrikaanse wyne. Oorspronklik is ʼn nuwe analitiese metode ontwikkel en gevalideer gebaseer is op ‘stir bar sorptive extraction’ (SBSE) in die gas fase vir die analise van 37 vooraf geselekteerde vlugtige verbindings. Die metode is verbeter deur belangrike modifikasies aan te bring en die hoeveelheid verbindings wat analiseer word te vermeerder na 39. Hierdie metode is suksesvol aangewend op ʼn groot hoeveelheid Pinotage wyne van oesjare 2005 en 2006. Die kwantitatiewe data van hierdie wyne is onderwerp aan verskillende chemometriese analises om moontlike ko-/variasies te ondersoek. ʼn Duidelike onderskeid is opgemerk tussen die twee oesjare, waar die 2005 wyne gekarakteriseer is deur hout-verwante verbindings en die 2006 wyne weer meer deur fermentasie verbindings. Die verbeterde metode is verder aangewend vir analiese van ander kultivars van oesjare 2005, wat twee wit (Sauvignon Blanc en Chardonnay) en drie rooies (Shiraz, Cabernet Sauvignon en Merlot) ingesluit het. Die kwantitatiewe data van die ses kultivars van oesjaar 2005 is op ʼn soortgelyke wyse geanaliseer deur verskillende chemometriese metodes te gebruik. Beduidende verskille is opgemerk tussen die twee wit kultivars en tussen die vier rooi kultivars. Die hoof rolspelers tussen die ses kultivars was weereens die verbindings wat ʼn hout en fermentasie aard het. Die unieke karakter van die Pinotage wyne in vergelyking met die ander rooi kultivars was opvallend. Hierdie wyn word gekarakteriseer deur hoë vlakke van isoamiel asetaat en lae vlakke van isoamiel alkohol, waar eersgenoemde gekatogiseer word as ʼn verbinding wat ʼn vrugte (piesang) geur in Pinotage uitdruk. Verder is gevorderde chromatografiese tegnologie in die vorm van ‘comprehensive two-dimentional gas chromatography’ (GC x GC) gekoppel met ‘time-of-flight mass spectroscopy’ (TOFMS) ondersoek vir die analiese van vlugtige verbindings in jong Suid-Afrikaanse wyne. Hierdie werk het hoofsaaklik op Pinotage wyne gefokus. Eerstens is ‘solid phase micro extraction’ (SPME) in die gas fase gekombineer met GC x GC-TOFMS. As gevolg van die hoë resolusie en groot piek kapasiteit van GC x GC is meer as 200 verbindings wat voorheen gerapporteer is as wyn komponente geïdentifiseer. Hierdie verbindings is gedomineer deur hoë vlugtige polêre verbindings, hoofsaaklik as gevolg van die karaktersitieke van SPME..In ʼn poging om die metode verder te verbeter is ʼn selektiewe ekstraksie metode naamlik ‘solid phase extraction’ (SPE) in kombinasie met GC x GC-TOFMS gebruik. Met hierdie tegniek is meer as 275 verbindings geïdentifiseer, waarvan die meeste nie met die vorige metode waargeneem is nie. Hierdie verbindings sluit vlugtige fenole, laktone en meestal aromatiese esters en norisoprenoïdes in, wat moontlik die reuk en smaak van wyn kan beïnvloed. Die metodes ontwikkel gedurende die studie het nuwe informasie verskaf aangaande die vlugtige komponente teenwoordig in Suid Afrikaanse wyne.

Thesis (PhD (Chemistry and Polymer Science))--Stellenbosch University, 2008. / Alkylated acetonitrile that forms during the synthesis of the sulfonium salt, [(Me3)2(MeS)S][BF4], is involved in the formation of new , -unsaturated Fischer-type carbene complexes from (CO)5M=C(OMe)CH2Li (M = Cr, W). Metal migration observed when the substitution product obtained from the reaction of the anionic carbene complexes (CO)5M=C(NMe2)CºC¯ (M = Cr, W) with Ph3PAu+ was left in solution, was also kinetically and theoretically investigated. 1H NMR and quantum mechanical (at the B3LYP level of theory) data indicated a complicated mechanism. The a,b-unsaturated Fischer-type carbene complex, (CO)5Cr=C(OMe)CH=C(Me)NH(Me), obtained from the reaction of (CO)5M=C(OMe)CH2¯ with alkylated acetonitrile, was transformed into the new remote one-N, six-membered, carbene ligand (rN1HC6) complex, (CO)5Cr=C(CH=C(Me)N(Me)CH=C(nBu). The carbene ligand unprecedentedly preferred the softer Rh(CO)2Cl moiety to the Cr(CO)5 metal fragment and transferred readily. A new series of remote and abnormal square planar compounds [r/a(NHC)(PPh3)2MCl]CF3SO3 (M = Pd or Ni) was prepared by oxidative substitution. The various positions for metal-carbon bond formation on a pyridine ring to furnish various ligand types i.e. C2 for nN1HC6, C3 for aN1HC6 or C4 for rN1HC6 received attention. The ligands were arranged in increasing order of carbene character, aNHC < nNHC < rNHC and trans influence, nN2HC5 ~ aN1HC6 ~ nN1HC6 < rN1HC6. In competitive situations, oxidative substitution occurred selectively at C4 of the pyridine ring rather than at C2 and on the aromatic ring containing the heteroatom (C4), rather than on an annealed aromatic ring (C7). Crystal and molecular structure determinations confirmed the preferred coordination sites. Quantum mechanical calculations (at the RI-BP86/SV level of theory) indicated that the chosen carbene ligand has a much larger influence than the metal on the BDE of the M-Ccarbene bond; the farther away the N-atom is from the carbene carbon, the stronger the bond. In complexes that also contain additional external nitrogen atoms, e.g. trans-chloro(N-methyl-1,2,4- trihydro-2-dimethylaminepyrid-4-ylidene)bis(triphenylphosphine)palladium(II) triflate and transchloro( N-methyl-1,2,4-trihydro-2-dimethylaminepyrid-4-ylidene)bis(triphenylphosphine)nickel(II) triflate, stabilisation originates from both the nitrogens. 2-Chloro-1-methyl-1H-pyrid-4-ylidenephenylammonium triflate afforded complexes with both remote as well as normal nitrogen atoms. New azole complexes of palladium and nickel with remote heteroatoms were also prepared from N-methyl-4',4'-dimethyl-2'-thiophen-3-chloro-2-yl-4,5-dihydro-oxazole. Employing the compound 1,5-dichloroanthraquinone, the product of a double oxidative substitution on two Pd centra could be isolated but not alkylated. The fact that the chemical shift of the metal bonded carbon in the 13C NMR spectrum can not be used as absolute measure of carbene character, was emphasised in a compound where the heteroatom was situated seven bonds away from the carbon donor. In efforts to synthesise a sulphur-bridged complex that contains carbene ligands, crystals of transdi- iodobis(1,3-dimethyl-imidazoline-2-ylidene)palladium were obtained. Bridged thiolato complexes with N1HC6 ligands were unexpectedly found in the attempt to substitute the halogen on chosen square planar carbene complexes of palladium, widening the application possibilities of N1HC6 ligands in organometallic chemistry beyond that of catalysis. A trinuclear cluster, [(PdPPh3)3(μ-SMe)3]BF4 was isolated as a by-product of these reactions. A series normal and abnormal thiazolylidene complexes of nickel and palladium were prepared by oxidative substitution of the respective 2-, 4- and 5-bromothiazolium salts with M(PPh3)4 (M = Pd or Ni), and unequivocally characterised. In a preliminary catalytic investigation, all the thiazolinium and simple pyridinium derived palladium complexes showed activity in the Suzuki-Miyaura coupling reaction. Little variation in activity in the order a (N next to carbon donor) > n > a (S next to carbon donor) was found for the former series, whereas decreased activity was exhibited in the sequence r > a > n of the latter group. The pyridinium derived complexes showed superior activity to the thiazolinium ones. The rNHC complex, trans-chloro(N-methyl-1,2,4-trihydro-2- dimethylaminepyrid-4-ylidene)bis(triphenylphosphine)palladium(II) triflate, showed similar Suzuki-Miyaura activity to the standard N2HC5 carbene complex precatalyst, trans-chloro[(1,3- dimethyl-imidazol-2-ylidene)triphenylphosphine]palladium(II) triflate.