Die Laserablation gekoppelt mit der Massenspektrometrie mit induktiv gekoppeltem Plasma ist eine vielversprechende direkte Feststofftechnik, die sich jedoch bei der Analyse von Kunststoffen wegen des Mangels an matrixangepassten zertifizierten Referenzmaterialien nicht durchsetzen konnte. Vorherige Arbeiten belegen polymerabhängige Abtragsraten. Das oft als interner Standard verwendete Intensitätssignal des Kohlenstoffisotopes 13C zur Korrektur dieser Unterschiede wird in der Literatur kritisch diskutiert. In dieser Arbeit als ein Teil des BMBF-geförderten MaxLaP-Projektes wurden matrixangepasste Standards auf Polyethylen- und Acrylnitril-Butadien-Styrolbasis entwickelt. In diese Standards wurden Br, Cd, Cu, Cr, Fe, Sb in organischer und anorganischer Form ihrer Verbindungen mittels Extrusion eingearbeitet. Die quantitative Zusammensetzung der Materialien wurde mittels ETV-ICP-OES, DC-arc-OES, RFA und ICP-MS nach Mikrowellendruckaufschluss überprüft. Die Verfahren wurden für die Kunststoffanalyse optimiert. Die mikroskopische Homogenität der Einarbeitung wurde mittels µ-SYRFA und LA-ICP-MS untersucht. Zur Untersuchung der Matrixeffekte während der LA-ICP-MS und der matrixunabhängigen Kalibrierung für Kunststoffe wurden der Einfluss der chemischen Verbindung der Additive, die Größe, der bei der Laserablation gebildeten Partikel und die Art des Kunststoffes auf die Laserablation analysiert. Die Korrektur des verschiedenen Materialabtrages über die Verwendung des 13C-Signals konnte für 21 verschiedene Kunststoffe erfolgreich durchgeführt werden. Allerdings zeigen die zugesetzten Additive ein nicht identisches Verhalten hinsichtlich Transport und Ionisierung. Weitere Ergebnisse belegen eine Anreicherung der Additive in verschiedenen Partikelgrößen sowie eine deutlich unterschiedliche Partikelbildung bei Ablationen von verschiedenen polymeren Matrices, was zu einer verstärkten Elementfraktionierung bei einer nicht matrixangepassten Kalibrierung führt. / Laser ablation coupled to a mass spectrometer with inductively coupled plasma (LA-ICP-MS) is a promising direct solid sampling technique. Due to the lack of matrix matched standard materials laser ablation is not well established in polymer analysis. In a recent study a polymer dependent interaction with the laser beam was reported, which resulted in a polymer depending ablation rate. The usage of the carbon-13-signal intensity as internal standard to correct these differences as commonly applied has been critically discussed in literature. In this work as part of a BMBF-supported MaxLaP-project (matrix effects during laser ablation of polymers) matrix matched standards based on polyethylene and acrylonitrile butadiene styrene were developed. In these materials Br, Cd, Cu, Cr, Fe and Sb were incorporated as organic and inorganic compounds through extrusion. Quantitative composition of the materials was determined by ETV-ICP-OES, DC-arc-OES, XRF and ICP-MS after high pressure microwave digestion. Analytical methods were optimized for trace analysis in plastic matrices. Microscopic homogeneity was examined by µ-SyXRF as well as LA-ICP-MS. In order to investigate the matrix effects and to determine the possibility of a matrix independent calibration for plastic materials, the influence of the chemical form of the additives, size of the formed particles and the type of the plastic on the LA-ICP-MS measurements were analyzed. The correction of the material uptake by the carbon-13-signal was successfully applied for 21 different types of plastic. However, different incorporated additives show a different transport and ionization behavior. Furthermore, our results confirm a different enrichment of the additives depending on particle size and a significantly different particle formation for different types of plastic, which leads to a more pronounced elemental fractionation by not using a matrix matched calibration.

Separation technologies have occupied a central role in the current practices of analytical methods used for drug analysis today. As the emphasis in contemporary drug analysis shifts towards ultra-trace concentrations, the contribution from unwanted matrix interferences takes on greater significance. In order to single out a trace substance with confidence from a rapidly expanding list of drug compounds (and their metabolites) in real complex specimens, analytical technologies must evolve to keep up with such trends. Today, the task of unambiguous identification in forensic toxicology still relies heavily upon chromatographic methods based on mass spectrometric detection, in particular GC-MS in electron ionisation (EI) mode. Although the combined informing power of (EI) GC-MS has served faithfully in a myriad of drug application studies to date, we may ask if (EI) GC-MS will remain competitive in meeting the impending needs of ultra-trace drug analysis in the fut ure? To what extent of reliability can sample clean-up strategies be used in ultra-trace analysis without risking the loss of important analytes of interest? The increasing use of tandem mass spectrometry with one-dimensional (1D) chromatographic techniques (e.g. GC-MS/MS) at its simplest, considers that single-column chromatographic analysis with mass spectrometry alone is not sufficient in providing unambiguous confirmation of the identity of any given peak, particularly when there are peak-overlap. Where the mass spectra of the individual overlapping peaks are highly similar, confounding interpretation of their identities may arise. By introducing an additional resolution element in the chromatographic domain of a 1D chromatographic system, the informing power of the analytical system can also be effectively raised by the boost in resolving power from two chromatographic elements. Thus this thesis sets out to address the analytical challenges of modern drug analysis through the application of high resolut ion comprehensive two-dimensional gas chromatography (GC„eGC) to a series of representative drug studies of relevance to forensic sciences.

This diploma thesis researches coffee authenticity problematice, mainly focusing on the authenticity of geographic origin. In the theoretical part of this work, botanical classification is described as well as production technology and processes. The work also includes chemical composition of coffee, describing the major components and changes during production phases. It describes major production areas of the world, in terms of general description and brief history. Problematics with coffee fraud and its identification are also described. Theoretical part also includes general geological description of 17 studied coffee growing regions. Experimental part is devoted to trace amount analysis of selected elements and volatile compounds. The element analysis was conducted using mass spectrometry or optical emission spectrometry, volatile compounds were determined using gas chromatography combined with mass spectrometry detection. Results were statistically described and analyzed, resulting in several discrimination models based on geographic origin.

Ceratitis fasciventris, Ceratitis anonae and Ceratitis rosa are polyphagous agricultural pests originating from African continent. Their behaviour is heavily altered by pheromones. Insect chemical communication channels are species-specific, represents taxonomic and reproduction barriers. Taxonomy of this group (so-called Ceratitis FAR complex) is unclear. Therefore new chemical approaches along with genetic tests for identification of entities within the cryptic species FAR complex are being developed. To study multi-component mixtures of male volatiles originating from the three mentioned fruit fly species, comprehensive two-dimensional gas chromatography with time- of-flight mass spectrometer (GC×GC-TOFMS) was used. A number of compounds were identified, out of which 23 were found to be distributed and shared among the studied species, 11 out of these were present in all three species. Analyses of male pheromone volatiles, using gas chromatography combined with electroantennographic detector (GC-EAD) revealed 4 common compounds with antennal activity shared among three studied species: methyl (E)-hex-3-enoate, 6-methylhept-5-en-2- one, linalool, and methyl (2E,6E)-farnesoate. The species-specific EAD active compounds in C. fasciventris were esters of isomers of hexenoic acid, whereas isomers of...

Under high irradiation, a fourth state of matter named plasma can be obtained. Plasmas emit electromagnetic radiation that can be recorded in the form of spectra for spectroscopic elemental analysis. With the advent of lasers in the 1960s, spectroscopists realized that lasers could be used simultaneously as a source of energy and excitation to create plasmas. The use of a laser to ignite a plasma subsequently led to laser-induced breakdown spectroscopy (LIBS), an optical emission spectroscopy capable of analyzing samples in various states (solids, liquids, gases) with minimal sample preparation, rapid feedback, and endowed with in situ capability. In this dissertation, studies of LIBS for multi-elemental analysis and geological applications are reported. LIBS was applied to cosmetic powders for elemental analysis, screening and classification based on the raw material used. Principal component analysis (PCA) and internal standardization were used. The intensity ratios of Mg/Si and Fe/Si observed in talcum powder show that these two ratios could be used as indicators of the potential presence of asbestos. The feasibility of LIBS for the analysis of gasification slags was investigated and results compared with those of inductively-coupled plasma−optical emission spectrometry (ICP-OES). The limits of detection for Al, Ca, Fe, Si and V were determined. The matrix effect was studied using an internal standard and PLS-R. Apart from V, prediction results were closed to those of ICP-OES with accuracy within 10%. Elemental characterization of outcrop geological samples from the Marcellus Shale Formation was also carried out. The matrix effect was substantially reduced. The limits of detection obtained for Si, Al, Ti, Mg, Ca and C were determined. The relative errors of LIBS measurements are in the range of 1.7 to 12.6%. Gate delay and laser pulse energy, have been investigated in view of quantitative analysis of variation of trace elements in a high-pressure environment. Optimization of these parameters permits obtaining underwater plasma emission of calcium with quantitative results on the order of 30 ppm within a certain limit of increased pressure. Monitoring the variation of the trace elements can predict changes in the chemical composition in carbon sequestration reservoir.

It is sincerely hoped that this work will motivate other researchers and in particular my colleagues to do further research in the field of cellphone technology, especially how it can be mapped to enable it to be utilised as evidence in our courts. This research aims to develop the mapping of cellphone technology as an aid in the investigation of crime. The mapping of cellphone technology refers to how cellphone technology can be utilised in crime investigation and in particular how a criminal can be placed at the scene of a crime, as a result of a cellphone call that was either made or received. To place the suspect at the scene of a crime as a result of a call made or received, cellphone records and technology of the relevant cellphone company, as well as present computer programmes can be utilised. Shortly, it can be said that a criminal can geographically be placed within a space some where on this earth. / Criminology / M.Tech. (Forensic Investigation)

Les agents anti-infectieux sont utilisés pour traiter ou prévenir les infections chez les humains, les animaux, les insectes et les plantes. L’apparition de traces de ces substances dans les eaux usées, les eaux naturelles et même l’eau potable dans plusieurs pays du monde soulève l’inquiétude de la communauté scientifique surtout à cause de leur activité biologique. Le but de ces travaux de recherche a été d’étudier la présence d’anti-infectieux dans les eaux environnementales contaminées (c.-à-d. eaux usées, eaux naturelles et eau potable) ainsi que de développer de nouvelles méthodes analytiques capables de quantifier et confirmer leur présence dans ces matrices. Une méta-analyse sur l’occurrence des anti-infectieux dans les eaux environnementales contaminées a démontré qu’au moins 68 composés et 10 de leurs produits de transformation ont été quantifiés à ce jour. Les concentrations environnementales varient entre 0.1 ng/L et 1 mg/L, selon le composé, la matrice et la source de contamination. D’après cette étude, les effets nuisibles des anti-infectieux sur le biote aquatique sont possibles et ces substances peuvent aussi avoir un effet indirect sur la santé humaine à cause de sa possible contribution à la dissémination de la résistance aux anti-infecteiux chez les bactéries. Les premiers tests préliminaires de développement d’une méthode de détermination des anti-infectieux dans les eaux usées ont montré les difficultés à surmonter lors de l’extraction sur phase solide (SPE) ainsi que l’importance de la sélectivité du détecteur. On a décrit une nouvelle méthode de quantification des anti-infectieux utilisant la SPE en tandem dans le mode manuel et la chromatographie liquide couplée à la spectrométrie de masse en tandem (LC-MS/MS). Les six anti-infectieux ciblés (sulfaméthoxazole, triméthoprime, ciprofloxacin, levofloxacin, clarithromycin et azithromycin) ont été quantifiés à des concentrations entre 39 et 276 ng/L dans les échantillons d’affluent et d’effluent provenant d’une station d’épuration appliquant un traitement primaire et physico- chimique. Les concentrations retrouvées dans les effluents indiquent que la masse moyenne totale de ces substances, déversées hebdomadairement dans le fleuve St. Laurent, était de ~ 2 kg. En vue de réduire le temps total d’analyse et simplifier les manipulations, on a travaillé sur une nouvelle méthode de SPE couplée-LC-MS/MS. Cette méthode a utilisé une technique de permutation de colonnes pour préconcentrer 1.00 mL d’échantillon dans une colonne de SPE couplée. La performance analytique de la méthode a permis la quantification des six anti-infectieux dans les eaux usées municipales et les limites de détection étaient du même ordre de grandeur (13-60 ng/L) que les méthodes basées sur la SPE manuelle. Ensuite, l’application des colonnes de SPE couplée de chromatographie à débit turbulent pour la préconcentration de six anti-infectieux dans les eaux usées a été explorée pour diminuer les effets de matrice. Les résultats obtenus ont indiqué que ces colonnes sont une solution de réchange intéressante aux colonnes de SPE couplée traditionnelles. Finalement, en vue de permettre l’analyse des anti-infectieux dans les eaux de surface et l’eau potable, une méthode SPE couplée-LC-MS/MS utilisant des injections de grand volume (10 mL) a été développée. Le volume de fuite de plusieurs colonnes de SPE couplée a été estimé et la colonne ayant la meilleure rétention a été choisie. Les limites de détection et de confirmation de la méthode ont été entre 1 à 6 ng/L. L’analyse des échantillons réels a démontré que la concentration des trois anti-infectieux ciblés (sulfaméthoxazole, triméthoprime et clarithromycine) était au dessous de la limite de détection de la méthode. La mesure des masses exactes par spectrométrie de masse à temps d’envol et les spectres des ions produits utilisant une pente d’énergie de collision inverse dans un spectromètre de masse à triple quadripôle ont été explorés comme des méthodes de confirmation possibles. / Anti-infectives are used to treat or prevent infections in humans, animals, insects and plants. The occurrence of traces of these substances in wastewaters, natural waters and even drinking water has caused concern among the scientific community especially because of their biological activiy. The goal of this research was to study the occurrence of anti-infectives in contaminated environmental waters (wastewaters, natural waters, and drinking water) and to develop new analytical methods able to quantitate and confirm their presence in these matrices. A meta-analysis on the occurrence of anti-infectives in contaminated environmental waters demonstrated that at least 68 parent compounds and 10 transformation products have been quantified to date. Environmental concentrations vary between 0.1 ng/L and 1 mg/L depending on the compound, the matrix and the source of contamination. According to this study, detrimental effects of anti-infectives on aquatic biota are possible and these substances could also affect indirectly human health because of their possible contribution to the dissemination of antibiotic resistance in bacteria. Preliminary tests on the development of a method of determination of anti-infectives in wastewaters showed the main difficulties to overcome during solid-phase extraction (SPE) as well as the importance of the detector selectivity. A novel method of determination of anti-infectives was described using off-line tandem SPE and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Six target anti-infectives (sulfamethoxazole, trimethoprim, ciprofloxacin, levofloxacin, clarithromycin and azithromycine) were quantitated at concentrations between 39 and 276 ng/L in samples of influent and effluent collected from a primary and physico-chemical wastewater treatement plant. Reported effluent concentrations indicate that the mean mass of these substances discharged daily in the St. Lawrence River was ~ 2 kg. In order to reduce total analysis time and simplify sample preparation, a new on-line SPE-LC-MS/MS was presented. This method used a column-switching technique to preconcentrate 1.00 mL of sample in an on-line SPE column. Method analytical performance allowed the quantitation of six anti-infectives in municipal wastewaters and limits of detection were of the same magnitude (13-60 ng/L) than methods based in offline SPE. Next, the application of turbulent flow chromatography on-line SPE columns for the preconcentration of six anti-infectives in wastewaters was explored. Results showed that these columns are an interesting alternative to traditional on-line SPE columns. Finally, in order to allow analysis of anti-infectives in surface and drinking water, we developed an on-line SPE-LC-MS/MS method using large-volume injections (10 mL). Breakthrough volumes of several on-line SPE columns were estimated and the column having the best retention, Strata-X, was chosen. Method detection and confirmation limits were between 1 and 6 ng/L. Analysis of real samples indicated that the concentration of the three target anti-infectives (sulfamethoxazole, trimethoprim and clarithromycin) was lower that the method detection limits. Accurate mass measurement by time-of-flight mass spectrometry and product ion spectra obtained by a reversed-energy ramp in a triple quadrupole mass spectrometer were explored as alternative confirmation methods.

The disposal of waste from agricultural activities has been recognised as a source of environmental contamination by endocrine disrupting chemicals (EDCs). The New Zealand dairy industry produces a large volume of dairy farm effluent, which contains EDCs in the form of estrogens. Most of this dairy farm effluent is applied onto the land for disposal. Groundwater and soil contamination by estrogens following waste application on the land have been reported overseas, but our understanding of the processes and factors governing the fate of estrogens in the soil is poor. Therefore the main goal of the present study was to better understand the fate and transport of estrogens, in particular 17β-estradiol (E2) and estrone (E1) in soil. In order to quantify E1 and E2 in drainage water and soil samples, chemical analysis by gas-chromatography mass-spectrometry (GC-MS) was carried out. This included sample extraction, sample clean-up through silica gel and gel permeation chromatography, and sample extract derivatisation prior to analysis. In order to develop a reliable method to extract estrogens from soil, research was conducted to optimise E1 and E2 extraction conditions by adjusting the number of sonication and shaking events, as well as the volume and type of solvent. Among five solvents and solvent mixtures tested, the best recovery on spiked and aged soil was obtained using an isopropanol/water (1:1) mix. A microcosm experiment was carried out to determine the dissipation rates of E2 and E1, at 8°C and at field capacity, in the Templeton soil sampled at two different depths (5-10 cm and 30-35 cm). The dissipation rates decreased with time and half-life values of 0.6-0.8 d for E1 and 0.3-0.4 d for E2 were found for the two depths studied. A field transport experiment was also carried out in winter, over three months, by applying dairy farm effluent spiked with estrogens onto undisturbed Templeton soil lysimeters (50 cm in diameter and 70 cm deep). The hormones were applied in dairy farm effluent at 120 mg m⁻² for E2 and 137 mg m⁻² for E1. The results of the transport experiment showed that in the presence of preferential/macropore flow pathways 0.3-0.7% of E2 and 8-13% of E1 was recovered in the leachate at the bottom of the lysimeters after 3 months, and 1-7% of the recovered E2 and 3-54% of the recovered E1 was leached within 2 days of application. These results suggest that leaching of estrogens via preferential/macropore flow pathways is the greatest concern for groundwater contamination. In the absence of preferential/macropore flow pathways, a significant amount (> 99.94%) of both hormones dissipated in the top 70 cm of soil, due to sorption and rapid biodegradation. Surprisingly, in all cases, estrogen breakthrough occurred before that of an inert tracer (bromide). This could not be explained by the advection-dispersion transport of estrogens, nor by their presence as antecedent concentrations in the soil. It was therefore suggested that colloidal enhanced transport of estrogens was responsible for the earlier breakthrough of estrogens and caused the leaching of a fraction of the applied estrogens to a soil depth of 70 cm. A two-phase model, adapted from a state-space mixing cell model, was built to describe the observed estrogen transport processes under transient flow. The model takes into account 3 transport processes namely, advection-dispersion, preferential/macropore flow and colloidal enhanced transport. This model was able to successfully describe the estrogen transport observed from the lysimeters.

Les agents anti-infectieux sont utilisés pour traiter ou prévenir les infections chez les humains, les animaux, les insectes et les plantes. L’apparition de traces de ces substances dans les eaux usées, les eaux naturelles et même l’eau potable dans plusieurs pays du monde soulève l’inquiétude de la communauté scientifique surtout à cause de leur activité biologique. Le but de ces travaux de recherche a été d’étudier la présence d’anti-infectieux dans les eaux environnementales contaminées (c.-à-d. eaux usées, eaux naturelles et eau potable) ainsi que de développer de nouvelles méthodes analytiques capables de quantifier et confirmer leur présence dans ces matrices. Une méta-analyse sur l’occurrence des anti-infectieux dans les eaux environnementales contaminées a démontré qu’au moins 68 composés et 10 de leurs produits de transformation ont été quantifiés à ce jour. Les concentrations environnementales varient entre 0.1 ng/L et 1 mg/L, selon le composé, la matrice et la source de contamination. D’après cette étude, les effets nuisibles des anti-infectieux sur le biote aquatique sont possibles et ces substances peuvent aussi avoir un effet indirect sur la santé humaine à cause de sa possible contribution à la dissémination de la résistance aux anti-infecteiux chez les bactéries. Les premiers tests préliminaires de développement d’une méthode de détermination des anti-infectieux dans les eaux usées ont montré les difficultés à surmonter lors de l’extraction sur phase solide (SPE) ainsi que l’importance de la sélectivité du détecteur. On a décrit une nouvelle méthode de quantification des anti-infectieux utilisant la SPE en tandem dans le mode manuel et la chromatographie liquide couplée à la spectrométrie de masse en tandem (LC-MS/MS). Les six anti-infectieux ciblés (sulfaméthoxazole, triméthoprime, ciprofloxacin, levofloxacin, clarithromycin et azithromycin) ont été quantifiés à des concentrations entre 39 et 276 ng/L dans les échantillons d’affluent et d’effluent provenant d’une station d’épuration appliquant un traitement primaire et physico- chimique. Les concentrations retrouvées dans les effluents indiquent que la masse moyenne totale de ces substances, déversées hebdomadairement dans le fleuve St. Laurent, était de ~ 2 kg. En vue de réduire le temps total d’analyse et simplifier les manipulations, on a travaillé sur une nouvelle méthode de SPE couplée-LC-MS/MS. Cette méthode a utilisé une technique de permutation de colonnes pour préconcentrer 1.00 mL d’échantillon dans une colonne de SPE couplée. La performance analytique de la méthode a permis la quantification des six anti-infectieux dans les eaux usées municipales et les limites de détection étaient du même ordre de grandeur (13-60 ng/L) que les méthodes basées sur la SPE manuelle. Ensuite, l’application des colonnes de SPE couplée de chromatographie à débit turbulent pour la préconcentration de six anti-infectieux dans les eaux usées a été explorée pour diminuer les effets de matrice. Les résultats obtenus ont indiqué que ces colonnes sont une solution de réchange intéressante aux colonnes de SPE couplée traditionnelles. Finalement, en vue de permettre l’analyse des anti-infectieux dans les eaux de surface et l’eau potable, une méthode SPE couplée-LC-MS/MS utilisant des injections de grand volume (10 mL) a été développée. Le volume de fuite de plusieurs colonnes de SPE couplée a été estimé et la colonne ayant la meilleure rétention a été choisie. Les limites de détection et de confirmation de la méthode ont été entre 1 à 6 ng/L. L’analyse des échantillons réels a démontré que la concentration des trois anti-infectieux ciblés (sulfaméthoxazole, triméthoprime et clarithromycine) était au dessous de la limite de détection de la méthode. La mesure des masses exactes par spectrométrie de masse à temps d’envol et les spectres des ions produits utilisant une pente d’énergie de collision inverse dans un spectromètre de masse à triple quadripôle ont été explorés comme des méthodes de confirmation possibles. / Anti-infectives are used to treat or prevent infections in humans, animals, insects and plants. The occurrence of traces of these substances in wastewaters, natural waters and even drinking water has caused concern among the scientific community especially because of their biological activiy. The goal of this research was to study the occurrence of anti-infectives in contaminated environmental waters (wastewaters, natural waters, and drinking water) and to develop new analytical methods able to quantitate and confirm their presence in these matrices. A meta-analysis on the occurrence of anti-infectives in contaminated environmental waters demonstrated that at least 68 parent compounds and 10 transformation products have been quantified to date. Environmental concentrations vary between 0.1 ng/L and 1 mg/L depending on the compound, the matrix and the source of contamination. According to this study, detrimental effects of anti-infectives on aquatic biota are possible and these substances could also affect indirectly human health because of their possible contribution to the dissemination of antibiotic resistance in bacteria. Preliminary tests on the development of a method of determination of anti-infectives in wastewaters showed the main difficulties to overcome during solid-phase extraction (SPE) as well as the importance of the detector selectivity. A novel method of determination of anti-infectives was described using off-line tandem SPE and liquid chromatography-tandem mass spectrometry (LC-MS/MS). Six target anti-infectives (sulfamethoxazole, trimethoprim, ciprofloxacin, levofloxacin, clarithromycin and azithromycine) were quantitated at concentrations between 39 and 276 ng/L in samples of influent and effluent collected from a primary and physico-chemical wastewater treatement plant. Reported effluent concentrations indicate that the mean mass of these substances discharged daily in the St. Lawrence River was ~ 2 kg. In order to reduce total analysis time and simplify sample preparation, a new on-line SPE-LC-MS/MS was presented. This method used a column-switching technique to preconcentrate 1.00 mL of sample in an on-line SPE column. Method analytical performance allowed the quantitation of six anti-infectives in municipal wastewaters and limits of detection were of the same magnitude (13-60 ng/L) than methods based in offline SPE. Next, the application of turbulent flow chromatography on-line SPE columns for the preconcentration of six anti-infectives in wastewaters was explored. Results showed that these columns are an interesting alternative to traditional on-line SPE columns. Finally, in order to allow analysis of anti-infectives in surface and drinking water, we developed an on-line SPE-LC-MS/MS method using large-volume injections (10 mL). Breakthrough volumes of several on-line SPE columns were estimated and the column having the best retention, Strata-X, was chosen. Method detection and confirmation limits were between 1 and 6 ng/L. Analysis of real samples indicated that the concentration of the three target anti-infectives (sulfamethoxazole, trimethoprim and clarithromycin) was lower that the method detection limits. Accurate mass measurement by time-of-flight mass spectrometry and product ion spectra obtained by a reversed-energy ramp in a triple quadrupole mass spectrometer were explored as alternative confirmation methods.

It is sincerely hoped that this work will motivate other researchers and in particular my colleagues to do further research in the field of cellphone technology, especially how it can be mapped to enable it to be utilised as evidence in our courts. This research aims to develop the mapping of cellphone technology as an aid in the investigation of crime. The mapping of cellphone technology refers to how cellphone technology can be utilised in crime investigation and in particular how a criminal can be placed at the scene of a crime, as a result of a cellphone call that was either made or received. To place the suspect at the scene of a crime as a result of a call made or received, cellphone records and technology of the relevant cellphone company, as well as present computer programmes can be utilised. Shortly, it can be said that a criminal can geographically be placed within a space some where on this earth. / Criminology and Security Science / M.Tech. (Forensic Investigation)