Track stiffness is the one of the most critical parameters of the track structure. Its evaluation is important to assess track quality, component performance, localised faults and optimise maintenance periods and activities. Keeping the track stiffness within acceptable range of values is connected with keeping the railway network in a satisfactorily performing condition, allowing thereby upgrade of its capacity (speed, load, intensity). Current railway standards are changing to define loading and stiffness requirements for improved ballasted and ballastless performance under high speed train traffic. In recent years various techniques have been used to measure track deflection which have been also used to validate numerical models to assess various problems within the railway network. Based on recent introduction of the Video Gauge for its application in the civil engineering industry this project provides the proof of effective applicability of this DIC (Digital image correlation) tool for the accurate assessment of track deflection and the calculation of track stiffness through its effective applicability in various track conditions for assessing the stiffness of various track forms including track irregularities where abrupt change in track stiffness occur such as transition zones and rail joints. Attention is given in validation of numerical modelling of the response of insulated rail joints under the passage of wheel load within the goal to improve track performance adjacent to rail joints and contribute to the sponsoring company s product offering. This project shows a means of improving the rail joint behaviour by using external structural reinforcement, and this is presented through numerical modelling validated by laboratory and field measurements. The structural response of insulated rail joints (IRJs) under the wheel vertical load passage is presented to enhance industry understanding of the effect of critical factors of IRJ response for various IRJ types that was served as a parametric FE model template for commercial studies for product optimisation.

Railway track stiffness (vertical track load divided by track deflection) is a basic parameter oftrack design which influences the bearing capacity, the dynamic behaviour of passing vehiclesand, in particular, track geometry quality and the life of track components. Track stiffness is abroad topic and in this thesis some aspects are treated comprehensively. In the introductionpart of the thesis, track stiffness and track stiffness measurements are put in their propercontext of track maintenance and condition assessment. The first aspect is measurement of track stiffness. During the course of this project, Banverkethas developed a new device for measurement of dynamic track stiffness called RSMV(Rolling Stiffness Measurement Vehicle). The RSMV is capable of exciting the trackdynamically through two oscillating masses above one wheelset. The dynamic stiffness is acomplex-valued quantity where magnitude is the direct relation between applied load anddeflection (kN/mm) and phase is a measure of deflection-delay by comparison with force. Thephase has partial relationship with damping properties and ground vibration. The RSMVrepeatability is convincing and both overall measurements at higher speeds (up to 50 km/h)and detailed investigations (below 10 km/h) can be performed. The measurement systemdevelopment is described in Paper A and B. The second aspect is evaluation of track stiffness measurements along the track from a trackengineering perspective. Actual values of stiffness as well as variations along the track areimportant, but cannot always answer maintenance and design related questions alone. InPaper D track stiffness is studied in combination with measurements of track geometryquality (longitudinal level) and ground penetrating radar (GPR). The different measurementsare complementary and a more reliable condition assessment is possible by the combinedanalysis. The relation between soft soils and dynamic track stiffness measurements is studiedin Paper C. Soft soils are easily found and quantified by stiffness measurements, in particularif the soft layer is in the upper part of the substructure. There are also possibilities to directlyrelate substructure properties to track stiffness measurements. Environmental vibrations areoften related to soft soils and partly covered in Paper C. One explanation of the excitationmechanism of train induced environmental vibrations is short waved irregular supportconditions. This is described in Paper E, where track stiffness was evinced to have normalvariations of 2 – 10 % between adjacent sleepers and variations up to 30 % were found. Anindicative way of finding irregular support conditions is by means of filtering longitudinallevel, which is also described in the paper. Train-track interaction simulation is used in PaperH to study track stiffness influence on track performance. Various parameters of trackperformance are considered, e.g. rail sectional moment, rail displacement, forces at wheel-railinterface and on sleepers, and vehicle accelerations. Determining optimal track stiffness froman engineering perspective is an important task as it impacts all listed parameters. The third aspect, efficient maintenance, is only partially covered. As track stiffness relates toother condition data when studied from a maintenance perspective, vertical geometricaldefects (longitudinal level and corrugation/roughness) are studied in paper F. The generalmagnitude dependency of wavelength is revealed and ways of handling this in conditionassessment are proposed. Also a methodology for automated analysis of a large set ofcondition data is proposed in Paper G. A case study where dynamic track stiffness,longitudinal level and ground penetrating radar are considered manifests the importance oftrack stiffness measurements, particularly for soil/embankment related issues. / QC 20100623

In this work the influence of Under Sleeper Pads on the dynamic forces on a railway track is investigated. A special interest is devoted to the effect of using Under Sleeper Pads in a railway track with changing vertical stiffness. The contact force between wheel and rail and the ballast contact forces are examined. For the investigation a finite element model with the length of thirty sleepers is created and calculations are performed with the software LS-DYNA. Three different cases of varying vertical track stiffness are studied: the transition from an embankment to a bridge, a randomly varying track stiffness along the railway track and hanging sleepers.

<p>In this work the influence of Under Sleeper Pads on the dynamic forces on a railway track is investigated. A special interest is devoted to the effect of using Under Sleeper Pads in a railway track with changing vertical stiffness. The contact force between wheel and rail and the ballast contact forces are examined. For the investigation a finite element model with the length of thirty sleepers is created and calculations are performed with the software LS-DYNA. Three different cases of varying vertical track stiffness are studied: the transition from an embankment to a bridge, a randomly varying track stiffness along the railway track and hanging sleepers.</p>

Please read the abstract in the section 00front of this document / Thesis (PhD)--University of Pretoria, 2009. / Civil Engineering / unrestricted

Transition zones are changes in the track structure, detected by an abrupt deviationin track stiffness and/or differential settlements. One inevitable transition zone is thebridge approach. This study has investigated in this transition zone, adapted for highspeed,ballastless track. The aim was to observe the general behaviour of the transitionzone including its critical components, and to compare different measures, transitionconstructions, to manage with the eventual problems. A base model, called Nullmodel,was developed using the 3D finite element method to evaluate the behaviour of thetransition zone. Based on the Nullmodel, six comparative models have been created,including different types of transition constructions within the substructure. New forthis study is that it investigates the overall behaviour of the transition zone, and alsothe substitution of subballast in combination with approach blocks.For the general behaviour of the transition zone, the results have shown that theballastless track does not behave as a traditional ballasted track. Furthermore,the direction of travel affects the magnitude of different dynamical parameters.Comparing different transition constructions, replacing the subballast with ahydraulically bonded layer in combination with an approach block with cementbounded granular material is found to be the best alternative. Finally, the invertedapproach block is found to be an equally good, or better, mitigative measure incomparison with the regular approach block.

Railway tracks experience elevated rail deflections when the supporting soil is soft and/or the train speed is greater than approximately 50% of the wave propagation velocity in the track-soil system (i.e. the critical velocity). Such vibrations are undesirable, so soil replacement or soil improvement of the natural soil (or alternatively mini-piles or lime-cement treatment) is often used to increase track-ground stiffness prior to line construction. Although areas of existing soft subgrade might be easily identified on a potential new rail route, it is challenging to determine the type and depth of ground remediation required. Therefore, major cost savings can be made by optimising ground replacement/improvement strategies. This paper presents a numerical railway model, designed for the dynamic analysis of track-ground vibrations induced by high speed rail lines. The model simulates the ground using a thin-layer finite element formulation capable of calculating 3D stresses and strains within the soil during train vehicle passage. The railroad track is modelled using a multi-layered formulation which permits wave propagation in the longitudinal direction, and is coupled with the soil model in the frequency-wavenumber domain. The model is validated using a combination of experimental railway field data, published numerical data and a commercial finite element package. It is shown to predict track and ground behaviour accurately for a range of train speeds. The railway simulation model is computationally efficient and able to quickly assess dynamic, multi-layered soil response in the presence of ballast and slab track structures. Therefore it is well-suited to analysing the effect of different soil replacement strategies on dynamic track behaviour, which is particularly important when close to critical speed. To show this, three soil-embankment examples are used to compare the effect of different combinations of stiffness improvement (stiffness magnitude and remediation depths up to 5 m) on track behaviour. It is found that improvement strategies must be carefully chosen depending upon the track type and existing subgrade layering configuration. Under certain circumstances, soil improvement can have a negligible effect, or possibly even result in elevated track vibration, which may increase long-term settlement. However, large benefits are possible, and if detailed analysis is performed, it is possible to minimise soil improvement depth with respect to construction cost.

The diploma thesis deals with analytical description of vehicle - track dynamic interface. There are described basic analytical models which are subsequently extended in order to get a more precise description of dynamic phenomena. The aim is to compile a model that faithfully describes the dynamic phenomena in the track. These new compiled models are qualitatively compared with data obtained by measuring in the track.

The diploma thesis deals with descriptions of vehicle - track dynamic interface. There are described basic analytical models of railway track. The numerical models are created by using finite element methods with moving load simulated axle of rail vehicle. The aim of thesis is to create the model which most accurately describes the dynamic phenomena in the track. The results from models are compared with data obtained by measuring in the track. Next aim of thesis is to determine dependency of rail cross-sectional characteristics on equivalent rail head wear and then on rail deflection.