M.Ing. / Another method is suggested in this paper to decide on the method of control at intersections. A computer program has been developed to simulate traffic on a macroscopic basis to obtain cost for delay, fuel consumption, accidents, maintenance, oil consumption and capital investment. The total cost per vehicle proved that the existing criteria are conservative in so far they warrant traffic signs earlier than necessary ...

Although a handful of experiments have utilized indirect feedback in attempts to reduce speeding on roadways, fewer experiments have utilized direct feedback as a means to reduce incidences of speeding. The current study evaluated the effects of direct and individualized feedback provided by a large electronic feedback sign that displayed the speed of oncoming vehicles as they approached the sign along the roadways of a college campus. The effects of the sign were evaluated using a non-simultaneous multiple baseline experimental design employing two control conditions and intervention phase. Each condition was implemented at three sites on the college campus. The results showed that intervention produced significant decreases in both measures of vehicle speeds at each site, relative to measures collected during both control conditions.

No description available.

Lately, the attractiveness of cities has contributed to a rise in vehicle movements to and from cities. The growth of freight movements in cities predictably will be one of the critical issues of the near future. Congestion caused by the increased movements of freight impacts the flow of private and transit vehicles. Thus, it is crucial to reduce the congestion on multimodal corridors. Components of the Intelligent Transportation System (ITS) such as Freight Signal Priority (FSP) and Transit Signal Priority (TSP) that promote the freight and transit vehicles may not only help solve these conditions but may assist with the sustainability of the system. The primary objective of this research is to develop guidelines for traffic agencies to implement signal priorities based on identified decision factors on certain corridors. Besides, this study evaluates the efficiency of FSP and TSP in improving the performance of freight and transit systems. Finally, inclusive guidelines are drawn up based on the literature and the conducted simulation. The developed guidelines apply to corridors where freight delay plays a vital role in the assessment of corridor benefits. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2020. / FAU Electronic Theses and Dissertations Collection

The purpose of this research paper was to translate a Computer Model (SIGART), capable of simulating a progressive traffic signal lights system, from Burroughs B5500 FORTRAN II to the IBM 360 FORTRAN IV computer language, to outline the program algorithm, to set up detailed program documentation and to validate this model by applying practical system data. Expansion of the SIGART program by addition of an option to produce a time space plot of the output data utilizing a Calcomp plotter was also to be considered.

This report represents a concentrated effort that determines the feasibility of audible pedestrian signals. These signals are devices which give auditory cues to help the visually impaired cross safely at difficult intersections. Surveys were sent out to over 100 organizations, audible signal manufacturers, and cities who have knowledge of the devices, and responses were analyzed. The devices were found to be feasible but only at certain complex and confusing intersections. Twelve criteria for the installation of the devices were developed as were twelve criteria for the operation of the devices. Buzzers, constant tones, bird calls, and voice signals were examined by obtaining information from traffic engineers who had experience with each sound. It was determined that intermittent tones were the most effective for human localization. For the most widely used devices, cost data were developed for the products, installation, and maintenance. A partial listing of the U.S. and foreign cities which have the devices was compiled along with a partial listing of audible signal manufacturers. The problems the visually impaired face as well as their suggested solutions are listed. Topics for further study include the use of hand-held devices which activate sound signals at intersections and the development of tone schemes for 4-leg and multi-leg intersections which are not north south and east-west. An additional topic for future study is the development of tone schemes for traffic circles. / Master of Science

In the traffic engineering field today, much attention is being given to the area of intersection control. The intersection has long been recognized as the most critical element in our highway system. Accidents, delay, wasted fuel and congestion are greatest at intersections. The variable having the greatest effect on traffic flow at an intersection or in a network of intersections is the traffic signal timing. In recent years, several computer programs have been developed to aid the traffic engineer in signal timing. This thesis examines the effect of the signal timing plans generated by one of the more widely used programs, TRANSYT 7, on the energy consumption of two signalized networks. Also examined are the relationships of delay and stops to fuel consumption. The TRANSYT 7 program was used to generate signal timing plans over a range of cycle lengths and stop penalties. The TRANSYT 7 signal timing plans were entered into NETSIM, a microscopic traffic simulation program, to determine their effect on fuel consumption in the two study networks. / Master of Science

Research on connected vehicles (CV) has attracted attention in the last decade due to numerous potential applications and challenges related to exchange of information between the vehicles (and infrastructure). Most of the relevant studies focus on these applications and challenges with the help of novel or existing simulation frameworks. The simulation framework often contains the mobility and communication components, and these components are frequently simplified. In this study, the authors aim to provide the detailed information for developing a fully V2X capable infrastructure within the lab environment. The physical components of the proposed infrastructure include: (i) userdriven Driving Simulator (DS) with the embedded micro-simulation tool (MS); (ii) external traffic signal controller (TSC); (iii) Road Side Unit (RSU) and omnidirectional antenna attached to RSU; (iv) On-Board Unit (OBU) that is integrated within DS‘s cockpit. The proposed framework can be used for advanced applications in the context of connected vehicles. / Includes bibliography. / Thesis (M.S.)--Florida Atlantic University, 2017. / FAU Electronic Theses and Dissertations Collection

Improving the efficiency of traffic operations along arterials is currently a priority for many agencies as their roadway infrastructure is built out to the largest possible capacity within the urban environment. Many advanced systems are being implemented to optimize traffic signal timing. Air quality is typically not a consideration when these decisions are made. The relationship between exposure to air pollution and traffic signal timing has not been fully explored by other researchers. This study is the first research effort to combine detailed traffic signal timing data (at 5 second intervals) and air pollutant exposure data. Results show that longer green time along the busy arterial reduces pollutant levels, while increased volume per cycle increases pollutant levels. This research quantifies the factors that contribute to pedestrian, bicyclist, and transit user exposure at a busy intersection along an urban arterial. The factors include traffic signal timing, weather related variables, traffic volumes, and heavy vehicle and bus presence. Additionally, the impact of an adaptive traffic signal system on air quality is assessed to understand the implications of signal timing on air pollutant exposure.

This thesis presents an analysis of the characteristics of malfunction flash incidents based on the Georgia Department of Transportation crash reporting database. Malfunction flash is an unintentional state of flash mode in intersection signal hardware. The flash mode is a signal indication of yellow/red or red/red flash. The flash mode can be due to many issues, such as hardware failure, damage, or storms. Crash reports are completed by police officers at the scene. After processing by the local jurisdiction reports are sent to GDOT for archiving and analysis. GDOT archives the reports in a PDF image format without editable text. This research will develop a procedure to convert the archived PDF reports to text files using optical character recognition (OCR) software. The developed procedure will extract the description paragraph of the incident from the PDF. The extracted descriptions may then be searched for useful information about the incident. The text files will be run through a filter for keywords, such as; "malfunction flash," "red/red flash," "yellow/red flash," and others. Incidents flagged by the keywords will be reexamined to determine if they are malfunction flash incidents. The 2006 GDOT incident data base will be used for this effort. From an original possible candidate list of 70,000 signalized intersection incidents malfunction incidents will be identified using this method. A statistical analysis will be completed seeking trends and important characteristics of malfunction incidents.