Spelling suggestions: "subject:"triangular mesh"" "subject:"triangular esh""
1 |
Mathematical modelling of shallow water flows with application to Moreton Bay, BrisbaneBailey, Clare L. January 2010 (has links)
A finite volume, shock-capturing scheme is used to solve the shallow water equations on unstructured triangular meshes. The conditions are characterised by: slow flow velocities (up to 1m/s), long time scale (around 10 days), and large domains (50-100km across). Systematic verification is carried out by comparing numerical with analytical results, and by comparing parameter variation in the numerical scheme with perturbation analysis, and good agreement is found. It is the first time a shock-capturing scheme has been applied to slow flows in Moreton Bay. The scheme is used to simulate transport of a pollutant in Moreton Bay, to the east of the city of Brisbane, Australia. Tidal effects are simulated using a sinusoidal time-dependent boundary condition. An advection equation is solved to model the path of a contaminant that is released in the bay, and the effect of tide and wind on the contaminant is studied. Calibration is done by comparing numerical results with measurements made at a study site in Moreton Bay. It is found that variation in the wind speed and bed friction coefficients changes the solution in the way predicted by the asymptotics. These results vary according to the shape of the bathymetry of the domain: in shallower areas, flow is more subject to shear and hence changes in wind speed or bed friction had a greater effect in adding energy to the system. The results also show that the time-dependent boundary condition reproduces the tidal effects that are found on the Queensland coast, i.e. semi-diurnal with amplitude of about 1 metre, to a reasonable degree. It is also found that the simulated path of a pollutant agrees with field measurements. The computer model means different wind speeds and directions can be tested which allows management decisions to be made about which conditions have the least damaging effect on the area.
|
2 |
Scouting algorithms for field robots using triangular mesh mapsLiu, Lifang 31 July 2007
Labor shortage has prompted researchers to develop robot platforms for agriculture field scouting tasks. Sensor-based automatic topographic mapping and scouting algorithms for rough and large unstructured environments were presented. It involves moving an image sensor to collect terrain and other information and concomitantly construct a terrain map in the working field. In this work, a triangular mesh map was first used to represent the rough field surface and plan exploring strategies. A 3D image sensor model was used to simulate collection of field elevation information.<p>A two-stage exploring policy was used to plan the next best viewpoint by considering both the distance and elevation change in the cost function. A greedy exploration algorithm based on the energy cost function was developed; the energy cost function not only considers the traveling distance, but also includes energy required to change elevation and the rolling resistance of the terrain. An information-based exploration policy was developed to choose the next best viewpoint to maximise the information gain and minimize the energy consumption. In a partially known environment, the information gain was estimated by applying the ray tracing algorithm. The two-part scouting algorithm was developed to address the field sampling problem; the coverage algorithm identifies a reasonable coverage path to traverse sampling points, while the dynamic path planning algorithm determines an optimal path between two adjacent sampling points.<p>The developed algorithms were validated in two agricultural fields and three virtual fields by simulation. Greedy exploration policy, based on energy consumption outperformed other pattern methods in energy, time, and travel distance in the first 80% of the exploration task. The exploration strategy, which incorporated the energy consumption and the information gain with a ray tracing algorithm using a coarse map, showed an advantage over other policies in terms of the total energy consumption and the path length by at least 6%. For scouting algorithms, line sweeping methods require less energy and a shorter distance than the potential function method.
|
3 |
Scouting algorithms for field robots using triangular mesh mapsLiu, Lifang 31 July 2007 (has links)
Labor shortage has prompted researchers to develop robot platforms for agriculture field scouting tasks. Sensor-based automatic topographic mapping and scouting algorithms for rough and large unstructured environments were presented. It involves moving an image sensor to collect terrain and other information and concomitantly construct a terrain map in the working field. In this work, a triangular mesh map was first used to represent the rough field surface and plan exploring strategies. A 3D image sensor model was used to simulate collection of field elevation information.<p>A two-stage exploring policy was used to plan the next best viewpoint by considering both the distance and elevation change in the cost function. A greedy exploration algorithm based on the energy cost function was developed; the energy cost function not only considers the traveling distance, but also includes energy required to change elevation and the rolling resistance of the terrain. An information-based exploration policy was developed to choose the next best viewpoint to maximise the information gain and minimize the energy consumption. In a partially known environment, the information gain was estimated by applying the ray tracing algorithm. The two-part scouting algorithm was developed to address the field sampling problem; the coverage algorithm identifies a reasonable coverage path to traverse sampling points, while the dynamic path planning algorithm determines an optimal path between two adjacent sampling points.<p>The developed algorithms were validated in two agricultural fields and three virtual fields by simulation. Greedy exploration policy, based on energy consumption outperformed other pattern methods in energy, time, and travel distance in the first 80% of the exploration task. The exploration strategy, which incorporated the energy consumption and the information gain with a ray tracing algorithm using a coarse map, showed an advantage over other policies in terms of the total energy consumption and the path length by at least 6%. For scouting algorithms, line sweeping methods require less energy and a shorter distance than the potential function method.
|
4 |
FEM auf irregulären hierarchischen DreiecksnetzenGroh, U. 30 October 1998 (has links) (PDF)
From the viewpoint of the adaptive solution of partial differential equations a finit
e element method on hierarchical triangular meshes is developed permitting hanging nodes
arising from nonuniform hierarchical refinement.
Construction, extension and restriction of the nonuniform hierarchical basis and the
accompanying mesh are described by graphs. The corresponding FE basis is generated by
hierarchical transformation. The characteristic feature of the generalizable concept is the
combination of the conforming hierarchical basis for easily defining and changing the FE
space with an accompanying nonconforming FE basis for the easy assembly of a FE
equations system. For an elliptic model the conforming FEM problem is solved by an iterative
method applied to this nonconforming FEM equations system and modified by
projection into the subspace of conforming basis functions. The iterative method used is the
Yserentant- or BPX-preconditioned conjugate gradient algorithm.
On a MIMD computer system the parallelization by domain decomposition is easy and
efficient to organize both for the generation and solution of the equations system and for
the change of basis and mesh.
|
5 |
Ein Residuenfehlerschätzer für anisotrope Tetraedernetze und Dreiecksnetze in der Finite-Elemente-MethodeKunert, G. 30 October 1998 (has links) (PDF)
Some boundary value problems yield anisotropic solutions, e.g. solutions with boundary layers. If such problems are to be solved with the finite element method (FEM), anisotropically refined meshes can be advantageous. In order to construct these meshes or to control the error one aims at reliable error estimators. For isotropic meshes such estimators are known but they fail when applied to anisotropic meshes. Rectangular (or cuboidal) anisotropic meshes were already investigated. In this paper an error estimator is presented for tetrahedral or triangular meshes which offer a much greater geometrical flexibility.
|
6 |
Two-dimensional shock capturing numerical simulation of shallow water flow applied to dam break analysisKhan, Fayaz A. January 2010 (has links)
With the advances in the computing world, computational fluid dynamics (CFD) is becoming more and more critical tool in the field of fluid dynamics. In the past few decades, a huge number of CFD models have been developed with ever improved performance. In this research a robust CFD model, called Riemann2D, is extended to model flow over a mobile bed and applied to a full scale dam break problem. Riemann2D, an object oriented hyperbolic solver that solves shallow water equations with an unstructured triangular mesh and using high resolution shock capturing methods, provides a generic framework for the solution of hyperbolic problems. The object-oriented design of Riemann2D has the flexibility to apply the model to any type of hyperbolic problem with the addition of new information and inheriting the common components from the generic part of the model. In a part of this work, this feature of Riemann2D is exploited to enhance the model capabilities to compute flow over mobile beds. This is achieved by incorporating the two dimensional version of the one dimensional non-capacity model for erodible bed hydraulics by Cao et al. (2004). A few novel and simple algorithms are included, to track the wet/dry and dry/wet fronts over abruptly varying topography and stabilize the solution while using high resolution shock capturing methods. The negative depths computed from the surface gradient by the limiters are algebraically adjusted to ensure depth positivity. The friction term contribution in the source term, that creates unphysical values near the wet/dry fronts, are resolved by the introduction of a limiting value for the friction term. The model is validated using an extensive variety of tests both on fixed and mobile beds. The results are compared with the analytical, numerical and experimental results available in the literature. The model is also tested against the actual field data of 1957 Malpasset dam break. Finally, the model is applied to simulate dam break flow of Warsak Dam in Pakistan. Remotely sensed topographic data of Warsak dam is used to improve the accuracy of the solution. The study reveals from the thorough testing and application of the model that the simulated results are in close agreement with the available analytical, numerical and experimental results. The high resolution shock capturing methods give far better results than the traditional numerical schemes. It is also concluded that the object oriented CFD model is very easy to adapt and extend without changing the generic part of the model.
|
7 |
A posteriori error estimation for anisotropic tetrahedral and triangular finite element meshesKunert, Gerd 30 March 1999 (has links) (PDF)
Many physical problems lead to boundary value problems for partial differential equations, which can be solved with the finite element method. In order to construct adaptive solution algorithms or to measure the error one aims at reliable a posteriori error estimators. Many such estimators are known, as well as their theoretical foundation.
Some boundary value problems yield so-called anisotropic solutions (e.g. with boundary layers). Then anisotropic finite element meshes can be advantageous. However, the common error estimators for isotropic meshes fail when applied to anisotropic meshes, or they were not investigated yet.
For rectangular or cuboidal anisotropic meshes a modified error estimator had already been derived. In this paper error estimators for anisotropic tetrahedral or triangular meshes are considered. Such meshes offer a greater geometrical flexibility.
For the Poisson equation we introduce a residual error estimator, an estimator based on a local problem, several Zienkiewicz-Zhu estimators, and an L_2 error estimator, respectively. A corresponding mathematical theory is given.For a singularly perturbed reaction-diffusion equation a residual error estimator is derived as well. The numerical examples demonstrate that reliable and efficient error estimation is possible on anisotropic meshes.
The analysis basically relies on two important tools, namely anisotropic interpolation error estimates and the so-called bubble functions. Moreover, the correspondence of an anisotropic mesh with an anisotropic solution plays a vital role.
AMS(MOS): 65N30, 65N15, 35B25
|
8 |
An investigation of a finite volume method incorporating radial basis functions for simulating nonlinear transportMoroney, Timothy John January 2006 (has links)
The objective of this PhD research programme is to investigate the effectiveness of a finite volume method incorporating radial basis functions for simulating nonlinear transport processes. The finite volume method is the favoured numerical technique for solving the advection-diffusion equations that arise in transport simulation. The method transforms the original problem into a system of nonlinear, algebraic equations through the process of discretisation. The accuracy of this discretisation determines to a large extent the accuracy of the final solution. A new method of discretisation is presented that employs radial basis functions (rbfs) as a means of local interpolation. When combined with Gaussian quadrature integration methods, the resulting finite volume discretisation leads to accurate numerical solutions without the need for very fine meshes, and the additional overheads they entail. The resulting nonlinear, algebraic system is solved efficiently using a Jacobian-free Newton-Krylov method. By employing the new method as an extension of existing shape function-based approaches, the number of nonlinear iterations required to obtain convergence can be reduced. Furthermore, information obtained from these iterations can be used to increase the efficiency of subsequent rbf-based iterations, as well as to construct an effective parallel reconditioner to further reduce the number of nonlinear iterations required. Results are presented that demonstrate the improved accuracy offered by the new method when applied to several test problems. By successively refining the meshes, it is also possible to demonstrate the increased order of the new method, when compared to a traditional shape function basedmethod. Comparing the resources required for both methods reveals that the new approach can be many times more efficient at producing a solution of a given accuracy.
|
9 |
Simplificação de malhas triangulares baseada no diagrama de Voronoi intrínseco / Triangular mesh simplification based on intrinsic Voronoi diagramOliveira, Douglas Cedrim 24 February 2011 (has links)
In this dissertation, we study the triangular mesh simplification process, describing its main characteristics. We discuss an adaptation for triangular meshes of a mesh simplification process based on Voronoi coverage proposed by Peixoto [2002]. Moreover, we use Fast Marching Method as a distance function over the mesh and some different strategies for simplified mesh vertices selection, like curvature based selection. The simplification process is done by constructing an intrinsic Voronoi diagram over the original mesh. We discuss some necessary conditions to obtain a mesh, as Voronoi dual, without any singularities and topologically equivalent to the original mesh. / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / Nesta dissertação, estudaremos o processo de simplificaçãoo de malhas triangulares, caracterizando-o com suas particularidades. Discutiremos uma adaptação para superfícies triangulares do método de simplificação baseado em uma cobertura de Voronoi proposto por Peixoto [2002]. Além disso, utilizaremos o método Fast Marching como uma nova métrica e diferentes estratégias para seleção de vértices da malha simplificada, como a seleção por curvatura. A simplificação ocorre a partir de um diagrama de Voronoi intrínseco à malha. Discutiremos algumas condições necessárias para que a partir do dual desse diagrama, obtenha-se uma malha sem singularidades que seja equivalente a malha original.
|
10 |
Ein Residuenfehlerschätzer für anisotrope Tetraedernetze und Dreiecksnetze in der Finite-Elemente-MethodeKunert, G. 30 October 1998 (has links)
Some boundary value problems yield anisotropic solutions, e.g. solutions with boundary layers. If such problems are to be solved with the finite element method (FEM), anisotropically refined meshes can be advantageous. In order to construct these meshes or to control the error one aims at reliable error estimators. For isotropic meshes such estimators are known but they fail when applied to anisotropic meshes. Rectangular (or cuboidal) anisotropic meshes were already investigated. In this paper an error estimator is presented for tetrahedral or triangular meshes which offer a much greater geometrical flexibility.
|
Page generated in 0.0463 seconds