This thesis deals with brief research on problematics of antennas in microwave band for omni-directional applications, own design and assembling of such an antenna. The purpose of the design is to have a best possible radiation patterns and reflection loss of our antenna. Conical monopole is chosen and it is simulated and changed to get the best possible parameters. Two prototypes are manufactured with mechanical changes applied and their parameters measured. Finished antenna is used for experimental channel measurement.

The main goal of the masters project is to design a dual band antenna for receiving DVB-T signal in the area of the city of Brno. The antenna will be designed and detaily adjusted for receiving multiplex 1 and 3, exactly for frequencies of 538 MHz and 778 MHz. The designed antenna will be deeply tested in 4nec2 and CST Microwave Studio programs.

The following work represents the research attempt of Dr. Frasier's group to develop a FMCW wind profiler for atmospheric boundary layer studies. The hardware development and integration are described in detail.

No / Noise amplitude distribution measurements relevant to%satellite-mobile radio systems are reported. The rationale for the%measurements is outlined and the choice of measurement parameters%justified. The measurement equipment and measurement methodology are%described in detail. Results characterizing the elevation angle%distribution of impulsive noise are presented for rural, suburban and%urban environments and also for an arterial road (U.K. motorway)%carrying high density, fast moving traffic. Measurements of the levels%of impulsive noise to be expected in each environment for high- and%low-elevation satellite scenarios using appropriate antenna%configurations are also presented

No description available.

No description available.

No

Yes / This study presents an original asymmetric stepped-impedance resonator filter combined with meander coupled-line structures and enabling the realisation of finite transmission zeros (TZs) and the implementation of multi-band bandpass filters. The meander coupled sections (MCSs) tune the TZs and resonant frequencies: with higher-order spurious frequencies cancelled by the TZs, a single wideband with wide stopband from 1.18 to 1.84 GHz is possible. Furthermore, by positioning the finite TZs between the high-order spurious frequencies and adjusting the coupling strength between resonators, a quint-wideband filter can be realised, with centre frequencies of 1.19, 4.29, 5.43, 6.97, 9.9 GHz and fractional bandwidths of 31.9, 15.4, 15.8, 4.3, 39.2%, respectively. More importantly, two filters with single/quad-wideband performance can be realised by tuning the parameters of the MCS, and therefore they can be designed separately by using only one original structure. The triple-wideband filter is realised with the help of the asymmetric parallel uncoupled microstrip section. These filter structures enjoy the advantage of single/multi-band versatility, structure reusability and simplicity. The good in-band and out-of-band performance, low loss and simple structure of the proposed single/tri/quint-wideband filters make them very promising for applications in future multi-standard wireless communication. / European Union's Horizon 2020 research and innovation programme under Grant agreement H2020-MSCA-ITN-2016 SECRET-722424.

Les régimes dynamiques dans les basses couches de l’atmosphère à l’île de la Réunion sont conditionnés par l’action du relief et du rayonnement sur l’écoulement synoptique. L’île est située en permanence dans le flux des alizés de sud-est et son relief élevé, culminant à 3000 m dans le centre de l’île et 2600 m au sud, constitue un obstacle important pour l’écoulement moyen. Le relief, le chauffage différentiel des pentes et le contraste thermique avec l’océan influent sur les échanges locaux entre la couche limite marine et la troposphère libre.L’analyse des phénomènes complexes de l’écoulement atmosphérique au niveau de l’île a pour but initial de caractériser les transferts de polluants émis localement. Cette étude a deux applications : • La première rentre dans le cadre préparatoire à la mise en place, à 2200 m d’altitude sur le Piton Maïdo, de l’observatoire atmosphérique de l’OPAR, à l’horizon 2011. L’objectif est de comprendre les circulations locales induites par le relief et les transports associés afin de discriminer d’éventuelles pollutions par les sources locales sur le signal qui sera mesuré in situ au sommet du Maïdo.• La seconde vise à étudier la diffusion des panaches volcaniques du Piton de la Fournaise. L’éruption majeure d’avril 2007 du volcan réunionnais a montré que des panaches pouvaient générer d’importantes pollutions dans diverses parties de l’île allant jusqu’à poser de réels problèmes environnementaux et de santé publique.Ces applications s’appuient sur une étude par modélisation numérique à haute résolution des écoulements atmosphériques dans les basses couches au niveau de l’île, au moyen du modèle météorologique de recherche MésoNH, permettant de conduire un ensemble de simulations sur cas idéalisés puis sur cas réels avec diffusion de traceurs passifs. / Reunion Island is an isolated mountainous island in Indian Ocean culminating in the center at 3000 m and in the southern part at 2600 m asl and is located in the influence of very regular south-easterly trade winds. The perturbation of the prevailing humid trade wind flow by the complex topography causes large spatial variations in local weather. The analysis of atmospheric circulations at local scale has been conducted with the aim of improving the understanding of small-scale transport and dispersion of pollutants emitted from local sources. This study has two applications:• It takes part in the perspective of the new atmospheric research station of Piton Maïdo, a summit at 2200 m above sea level on the west coast of the island, in the frame of the developing Atmospheric Physics Observatory of La Reunion (Observatoire de Physique de l’Atmosphère de la Réunion, OPAR as French acronym). The objective is to examine to what extent local orographic perturbations of the synoptic wind and local wind systems are responsible for vertical export of air pollutants originating from the island boundary layer, and could affect ground-based measurements at the future Piton Maïdo observatory devoted to the monitoring of background atmospheric composition (greenhouse gases and aerosols).• The second one aims to investigate the behavior of the volcanic plumes from the Piton de la Fournaise. During the April-May 2007 eruption, large amounts of volcanic gases, particles and ash were released into the atmosphere causing air-pollution at several inhabited locations. In this work, the three-dimensional, non-hydrostatic, limited-area numerical model, MESONH, was run in high resolution to simulate features of airflows over Reunion Island in idealized and real conditions. Various passive tracers have been released in the model in order to characterize dynamical processes in the lower atmospheric layers and the related transport of air-masses.

Un des défis majeurs de l’Internet des Objets et, plus généralement, des tous les réseaux de capteurs sans fils, c’est l’alimentation de chaque nœud connecté. La solution la plus commune est d’équiper chaque dispositif d’une batterie mais cela introduit plusieurs contraintes, qui mettent en question la faisabilité de cette approche sur le long terme (durée de vie limité, couts de gestion élevé, empreinte écologique).Cette thèse développe une possible solution basée sur la transmission sans-fils de l’énergie. Un récupérateur d’énergie RF, composé d’une antenne, un redresseur haute-fréquence et un convertisseur élévateur, est présenté. Ce système permet de récupérer les ondes électromagnétiques et de produire une tension continue en sortie, qui peut être utilisé pour alimenter des microcontrôleurs ou des capteurs. L’absence d’une batterie interne augmente la flexibilité globale, surtout pour les situations où le remplacement n’est pas possible (ex. dispositifs implantés, nombre élevé de nœuds, milieux dangereux). Une étude approfondie sur les redresseur intégrés ultra-haute-fréquence de type Schottky et MOS a été mené ; plusieurs topologies ont été analysées et optimisées. De plus, l’utilisation d’un convertisseur élévateur a été envisagée, dans le but d’accroitre la tension en sortie ; une première version discrète et puis une plus compacte version intégrée, ont été abordées et testées. Ces développements ont permis d’aboutir à un récupérateur complet, potentiellement capable d’alimenter un microcontrôleur du commerce. / One of the challenges of the Internet of Things and, more in general, of every wireless sensor network is to provide electrical power to every single one of its smart nodes. A typical solution uses batteries but various major concerns reduce the long-term feasibility of this approach (limited lifetime, maintenance and replacement costs, and environmental footprint).This thesis develops a possible solution based on the wireless transmission of power. A complete RF harvester composed of an antenna, a UHF rectifier and a step-up voltage converter is presented. This system captures electromagnetic waves and converts them to a stable DC voltage to supply power to common logic circuits like microcontrollers and sensors. The lack of an internal battery provides an extended flexibility, especially when its replacement is not a viable option (ex. implanted devices, large number of nodes, dangerous environments, etc.). An in-depth study of integrated Schottky and CMOS UHF rectifiers is carried out; various topologies and optimizations are analyzed. Moreover, the use of an additional step-up converter is proposed in order to increase the system output voltage; an early discrete implementation and a final, more compact, integrated version are discussed and tested. These developments lead to a complete system capable of potentially powering an application with an off-the-shelf microcontroller.