This item contains the agenda, minutes, and attachments for the Faculty Senate meeting on this date. There may be additional materials from the meeting available at the Faculty Center.

Establishing secured communication among the different entities in an industrial environment is a major concern. Especially with the introduction of the Industrial Internet of Things (IIoT), industries have been susceptible to cyber threats, which makes security a critical requirement for the industries. Prevailing industrial communication standards were proven to meet the security needs to some extent, but the major issue which was yet to be addressed was interoperability. To achieve interoperability, Open Platform Communication Unified Architecture (OPC UA) was introduced as a communication protocol. OPC UA helped bridge the gap between Information Technology (IT) and Operational Technology (OT) security needs, but this also gives rise to new attack opportunities for the intruder. In this thesis, we have analysed the security challenges in OPC UA and the impact of two different cyberattacks on the OPC UA. First, we have implemented an OPC UA Network with the help of Raspberry Pis and open62541, an open-source implementation of the OPC UA client and server. Following this, to evaluate the performance of the network, we performed three cybersecurity attacks, Packet Sniffing, Man in the Middle Attack (MITM) and Denial of Service attack. We assessed the impact these attacks have on the OPC UA network. We have also discussed the detection mechanism for the same attacks. This analysis has helped us recognize the threats faced by OPC UA in an IIoT environment with respect to message flooding, packet sniffing and man in the middle attack and the countermeasures to this attack have been discussed / Att etablera en säker kommunikation mellan de olika enheterna i en industriell miljö är en stor utmaning. Speciellt efter introduktionen av Industrial Internet of Things (IIoT) har industrier varit mottagliga för cyberhot vilket gör cybersäkerhet en prioritet. Rådande industriella kommunikationsstandarder har visats att till viss del uppfylla säkerhets- behoven, men en av de största problemen var bristen på interoperabilitet. För att uppnå interoperabiliteten skapades Open Platform Communication Unified Architecture (OPC UA) som kommun- ikationsprotokoll. OPC UA hjälper till att överbrygga gapet mellan säkerhetsbehoven av information- steknologi (IT) och Operational Technology (OT), men detta ger också upphov till nya attackmöjligheter för inkräktare. I detta examensarbete har vi analyserat säkerhetsutmaningarna i OPC UA och effekten av två olika cyberattacker på OPC UA. Först har vi implementerat ett OPC UA Network med hjälp av Raspberry Pis och open62541 som är en öppen källkodsimplementering av OPC UA klient och server. Efter detta utförde vi tre cybersäkerhetsattacker för att utvärdera nätverkets prestanda, packet sniffing, Man in the Middle Attack (MITM) och Denial of Service attack. Vi bedömde vilken effekt dessa attacker har på OPC UA-nätverket. Vi har också diskuterat detektionsmekanismen för samma attacker. Denna analys har hjälpt oss att känna igen de hot som OPC UA står inför i en IIoT-miljö med avseende på dataflöde, packet sniffing och Man in the Middle attack och även försvar mot dessa attacker har diskuterats.

Establishing secured communication among the different entities in an industrial environment is a major concern. Especially with the introduction of the Industrial Internet of Things (IIoT), industries have been susceptible to cyber threats, which makes security a critical requirement for the industries. Prevailing industrial communication standards were proven to meet the security needs to some extent, but the major issue which was yet to be addressed was interoperability. To achieve interoperability, Open Platform Communication Unified Architecture (OPC UA) was introduced as a communication protocol. OPC UA helped bridge the gap between Information Technology (IT) and Operational Technology (OT) security needs, but this also gives rise to new attack opportunities for the intruder. In this thesis, we have analysed the security challenges in OPC UA and the impact of two different cyberattacks on the OPCUA. First, we have implemented an OPC UA Network with the help of Raspberry Pis and open62541, an open-source implementation of the OPC UA client and server. Following this, to evaluate the performance of the network, we performed three cybersecurity attacks, Packet Sniffing, Man in the Middle Attack (MITM) and Denial of Service attack. We assessed the impact these attacks have on the OPC UA network. We have also discussed the detection mechanism for the same attacks. This analysis has helped us recognize the threats faced by OPC UA in an IIoT environment with respect to message flooding, packet sniffing and man in the middle attack and the countermeasures to this attack have been discussed. / Att etablera en säker kommunikation mellan de olika enheterna i en industriell miljö är en stor utmaning. Speciellt efter introduktionen av Industrial Internet of Things (IIoT) har industrier varit mottagliga för cyberhot vilket gör cybersäkerhet en prioritet. Rådande industriella kommunikationsstandarder har visats att till viss del uppfylla säkerhets- behoven, men en av de största problemen var bristen på interoperabilitet. För att uppnå interoperabiliteten skapades Open Platform Communication Unified Architecture (OPC UA) som kommun- ikationsprotokoll. OPC UA hjälper till att överbrygga gapet mellan säkerhetsbehoven av information- steknologi (IT) och Operational Technology (OT), men detta ger också upphov till nya attackmöjligheter för inkräktare. I detta examensarbete har vi analyserat säkerhetsutmaningarna i OPC UA och effekten av två olika cyberattacker på OPC UA. Först har vi implementerat ett OPC UA Network med hjälp av Raspberry Pis och open62541 som är en öppen källkodsimplementering av OPC UA klient och server. Efter detta utförde vi tre cybersäkerhetsattacker för att utvärdera nätverkets prestanda, packet sniffing, Man in the Middle Attack (MITM) och Denial of Service attack. Vi bedömde vilken effekt dessa attacker har på OPC UA-nätverket. Vi har också diskuterat detektionsmekanismen för samma attacker. Denna analys har hjälpt oss att känna igen de hot som OPC UA står inför i en IIoT-miljö med avseende på dataflöde, packet sniffing och Man in the Middle attack och även försvar mot dessa attacker har diskuterats.

This item contains the agenda, minutes, and attachments for the Faculty Senate meeting on this date. There may be additional materials from the meeting available at the Faculty Center.

This item contains the agenda, minutes, and attachments for the Faculty Senate meeting on this date. There may be additional materials from the meeting available at the Faculty Center.

This item contains the agenda, minutes, and attachments for the Faculty Senate meeting on this date. There may be additional materials from the meeting available at the Faculty Center.

Executive functions, like the capacity to control and organize thoughts and behavior, develop from childhood to young adulthood. Although task switching and working memory processes are known to undergo strong developmental changes from childhood to adulthood, it is currently unknown how task switching processes are modulated between childhood and adulthood given that working memory processes are central to task switching. The aim of the current study is therefore to examine this question using a combined cue- and memory-based task switching paradigm in children (N = 25) and young adults (N = 25) in combination with neurophysiological (EEG) methods. We obtained an unexpected paradoxical effect suggesting that memory-based task switching is better in late childhood than in young adulthood. No group differences were observed in cue-based task switching. The neurophysiological data suggest that this effect is not due to altered attentional selection (P1, N1) or processes related to the updating, organization, and implementation of the new task-set (P3). Instead, alterations were found in the resolution of task-set conflict and the selection of an appropriate response (N2) when a task has to be switched. Our observation contrasts findings showing that cognitive control mechanisms reach their optimal functioning in early adulthood.

This master´s thesis describes the design and realization of the simulation in program Tecnomatix Process Simulate. The thesis deals with the creation of a simulated assembly line of gluing a protective glass to the headlight. For this operation is using four stationary robotic arms. Created simulation behaves like a real robotic assembly line. In simulation is implemented several input sensors, robotic operations and conveyer structure. The control is done with PLC programmed, designed in TIA portal 14. Thesis includes a detailed description of the design whole simulation, together with the Tecnomatix Process Simulate environment. This software offer a many external commissioning and three bigger were tested, two kinds of OPC servers and PLCSIM Advanced. The conclusion of the diploma thesis describes the way of simulation control with visualization of whole process cell.

Over the last few decades, the complexity and variety of automation systems have increased dramatically. Commissioning has grown more and more critical for the entire industry. Conventional commissioning is time-consuming and expensive. It's always been a challenge in manufacturing to put new designs into production or implement new technologies, control codes, or tactics. In Virtual Commissioning (VC), control programs of the physical system's Digital Twin (DT) can be validated in Software-in-the-Loop (SIL) before the actual commissioning. The emergence of new VC tools and methods has become a tremendous advantage, bringing the values of shorter duration, flexibility, and lower risks to the commissioning process. In this thesis, advanced process control was developed using the software Matlab and Simulink in conjunction with the engineering tools S7-PLCSIM Advanced and STEP 7 TIA Portal to conduct VC. A VC approach with four key steps is taken to evaluate the possibility of validating advanced process control. The steps are modeling DT of a rolling mill, model-based control design, simulation model development in Simulink, communication between the simulation model and the PLC program using S-7 TIA Portal, and PLCSIM Advanced. Also, a simulated Human-Machine Interface was designed to operate and visualize the process. VC of the rolling mill process was verified and validated by Model-in-the-Loop (MIL) and SIL simulation. The simulation gives satisfactory results as both MIL and SIL show identical outputs of the process.

La recherche qui suit porte sur l’expérience du jardinage communautaire à Montréal à partir de l’exemple de l’un des arrondissements. Au cours des dernières années, à l’échelle globale, la popularité des jardins communautaires est allée en grandissant. Comment interpréter cela à partir du point de vue des participants? Quelle est l’expérience vécue par les jardiniers communautaires et quelle signification accordent-ils à ces pratiques sociales? Afin de répondre à ces questions, j’ai fait appel à une démarche qualitative, combinant l’observation et entretiens en profondeur avec des participants. Les résultats de l’étude découlent de 30 entretiens semi-directifs. Des participants avec des profils sociaux divers ont été recrutés. En faisant appel à la théorie ancrée, la recherche met en lumière des contextes spécifiques à partir desquels les jardiniers communautaires fournissent des significations à leur engagement dans ce type de jardinage. Considérée à partir de trois dimensions – économique, sociale et culturelle – cette étude met en lumière le fait que les significations que les acteurs accordent à leurs pratiques dépendent du contexte, mais découlent aussi de leur subjectivité. Ressort aussi l’importance de la dimension émotionnelle. Le jardinage communautaire est décrit sous l’angle d’une pratique transformatrice – en convergence avec d’autres formes d’action collective – qui permet aux citoyens en tant que jardiniers de mieux faire face aux défis de la vie quotidienne, que ce soit sur le plan financier, social, culturel ou environnemental. Par le biais du jardinage, les participants soutiennent qu’ils approfondissent leur identité personnelle, tout en construisant de nouvelles relations avec les autres ainsi qu’avec la nature. La recherche confirme qu’en ce qui concerne l’expérience subjective de jardinage, les participants parlent de retombées positives. / The present research addresses the subjectivity of the community gardening experience in the case of a Montreal borough. Community gardens have regained popularity worldwide. How to interpret this phenomenon from the perspective of participants? And how do they experience (community) gardening and make sense of their social practices? To answer these questions, this study takes a qualitative approach that combines observations and in-depth interviews. The findings drawn from this study are based mainly on 30 semi-structured interviews. Participants from diverse social strata were recruited. Guided by grounded theory, this research stresses the specific contexts under which community gardeners generate meanings from their community gardening experience. Examined from three dimensions – economic, social, and cultural – this study reveals that meanings and significance are context-sensitive, personalized, and fluid. The emotional dimension emerges as of particular importance. Community gardening is viewed as a transformative practice – converging with diverse forms of collective action – that allows citizen gardeners to address everyday life challenges, whether financial, social, cultural, or environmental. Through gardening, participants claim that they are reconnecting with themselves, with other people, and with nature. This research confirms that with respect to the subjective experience of gardening, participants generally claim positive outcomes.