Spelling suggestions: "subject:"ultra high vacuum"" "subject:"ultra igh vacuum""
1 |
UHV studies of the adsorption of small adsorbate molecules on low index platinum single crystalsBaily, Christopher John January 2003 (has links)
No description available.
|
2 |
Alloy effects in catalysis : the structure and reactivity of the CuPd[85:15]{110}p(2x1) surfaceNewton, Mark A. January 1993 (has links)
No description available.
|
3 |
The Dynamics of Gas-Surface Energy Transfer in Collisions of Rare Gases with Organic Thin FilmsDay, Brian Scott 27 December 2005 (has links)
Understanding mechanisms at the molecular level is essential for interpreting and predicting the outcome of processes in all fields of chemistry. Insight into gas-surface reaction dynamics can be gained through molecular beam scattering experiments combined with classical trajectory simulations. In particular, energy exchange and thermal accommodation in the initial collision, the first step in most chemical reactions, can be probed with these experimental and computational tools.
There are many questions regarding the dynamic details that occur during the interaction time between gas molecules and organic surfaces. For example, how does interfacial structure and density affect energy transfer? What roles do intramonolayer forces and chemical identity play in the dynamics? We have approached these questions by scattering high-energy, rare gas atoms from functionalized self-assembled monolayers. We used classical trajectory simulations to investigate the atomic-level details of the scattering dynamics. We find that approximately six to ten carbon atoms are involved in impulsive collision events, which is dependent on the packing density of the alkyl chains. Moreover, the higher the packing density of the alkyl chains, the less energy is transferred to the surface on average and the less often the incident atoms come into thermal equilibrium with the surface. In addition to the purely hydrocarbon monolayers, organic surfaces with lateral hydrogen-bonding networks create more rigid collision partners than surfaces with smaller inter-chain forces, such as van der Waals forces. Finally, we find some interesting properties for organic surfaces that possess fluorinated groups. For argon scattering, energy transfer decreases with an increasing amount of surface fluorination, whereas krypton and xenon scattering transfer most energy to monolayers terminated in CF₃ groups, followed by purely hydrocarbon surfaces, and then perfluorinated surfaces. / Ph. D.
|
4 |
Optimization of growth conditions of GaAs1-xBix alloys for laser applicationsBahrami Yekta, Vahid 07 April 2016 (has links)
GaAsBi is a relatively unexplored alloy with interesting features such as a large bandgap reduction for a given lattice mismatch with GaAs substrates and good photoluminescence which make it promising for long wavelength light detection and emission applications.
In this research, the molecular beam epitaxy (MBE) method was used to grow epi-layers and hetero-structures. A Vertical-external-cavity surface-emitting-laser (VECSEL) was grown as a part of collaboration with Tampere University in Finland. The process of laser growth promoted the writer’s skills in the growth of hetero-structures and led into an investigation of the effect of growth conditions on GaAsBi optical properties with important results. For instance, when the substrate temperature during growth was reduced from 400°C to 300°C and all other growth conditions were fixed, the Bi concentration in the deposited films increased from 1% to 5% and the photoluminescence (PL) intensity decreased by more than a factor of 1000. This is an indication of the importance of growth temperature in GaAsBi crystal quality.
n+/p junctions were grown for the deep level transient spectroscopy (DLTS) experiments in collaboration with Simon Fraser University. The DLTS measurements showed that lowering the GaAsBi growth temperature increases the deep level density by a factor of 10. These deep levels are the source of non-radiative recombination and decrease the PL intensity.
The structural properties of GaAsBi were investigated by high resolution x-ray diffraction and polarized PL and revealed long distance atomic arrangement (Cu-Pt ordering) in GaAsBi. The measurements showed that the ordering is more probable at high growth temperature. This can be due to the larger mobility of the atoms on the surface at high growth temperatures that allows them to find the ordered low energy sites. / Graduate
|
5 |
Investigations into the role of α-amino acids as chiral modifiers for Ni-based enantioselective heterogeneous hydrogenation catalystsWilson, Karen E. January 2011 (has links)
The hydrogenation of β-ketoesters over chirally modified Ni catalysts is a celebrated and thoroughly researched example of an enantioselective heterogeneous catalytic reaction. Enantioselective heterogeneous processes, although extremely attractive in terms of fewer complications in the separation of products from the catalyst, are hindered in their viability as industrial applications due to the lack of detailed knowledge on how chirality is conferred to the metal surface. Surface science techniques have afforded substantial progress into determining mechanisms between modifier, reactant and catalyst to explain the source of enantioselectivity of the system. In this study, a combination of solution and ultra-high vacuum (UHV)-based experiments allow a more realistic interpretation of the surface chemistry underpinning the catalytic reaction as the key step in achieving enantioselective performance is the adsorption of chiral modifiers from solution. The behaviour of (S)-aspartic acid and (S)-lysine on Ni{111} and their interaction with the prochiral β-ketoester methylacetoacetate is investigated in this study to understand their potential as chiral modifiers for the system. In UHV, scanning tunnelling microscopy (STM), reflection absorption infrared spectroscopy (RAIRS), and temperature programmed desorption (TPD) are used to analyse the conformation and order of the amino acids on the metal, and their thermal stability. Additionally, liquid-solid interface RAIRS and X-ray photoelectron spectroscopy (XPS) are used to examine the modified Ni surface, prepared under aqueous conditions, to give an accurate representation of the catalytic studies. It has been found highly likely that, for (S)-aspartic acid modified Ni{111}, enantioselective sites exist at step or step/kink defects, formed by corrosive leaching of the Ni substrate. Conversely, lysine appears to bind with a high sticking probability to Ni, in the form of lysine islands, and does not appear to etch the Ni chirally. Finally, similar experiments have been carried out on Au{111}, where lysine was found to chiral restructure the surface and form nanofingers, and 2D Ni clusters grown on Au{111} in order to investigate the formation of possible metal-organic frameworks.
|
6 |
Estudo da eletrooxidação de monóxido de carbono em RuO2(110), e visualização morfológica e atômica de fases ricas em oxigênio na oxidação de Ru(0001) através da microscopia de varredura por tunelamento / Study of the electrooxidation of carbon monoxide on RuO2(110), and morphological and atomic visualization of oxygen-rich Ru(0001) surfaces by means of Scanning Tunneling MicroscopyAlves, Otavio Brandão 20 July 2007 (has links)
Nos últimos 30 anos o crescimento paralelo das Ciências de Superfície tradicionais, em ambiente de ultra-alto vácuo (UHV), com a Eletroquímica levou ao nascimento de um novo campo interdisciplinar: Física de Superfície e Eletroquímica. Técnicas de ambas as áreas dão informações complementares e assim, quando realizadas em conjunto podem fornecer muitas respostas em nível atômico, estrutural e eletrônico quando o eletrodo está em contato com a solução eletrolítica. A intenção primordial dessa Dissertação foi o estudo fundamental das fases ricas em oxigênio presentes na superfície de Ru(0001) através de caracterizações eletroquímicas e morfológicas utilizando um sistema que permitiu o acoplamento de uma célula eletroquímica miniatura de fluxo a câmaras de UHV. Inicialmente exibi-se a modificação e a construção de equipamentos necessários para a preparação do sistema binário Au-Pt(111) e do óxido monocristalino Ru2O(110). Imagens de STM em escala morfológica mostraram o crescimento anisotrópico do filme de RuO2(110) sobre um substrato monocristalino de Ru(0001). Resultados obtidos através da técnica de Voltametria Cíclica na eletrooxidação de CO em RuO2(110) corroboraram cálculos teóricos sobre a estrutura da superfície quando esta em ambiente úmido. Superfícies modelos baseadas em ouro, crescido epitaxialmente sobre um substrato de Pt(111), foram preparadas no sistema de UHV. Dados eletroquímicos foram correlacionados às composições superficiais destas, mostrando o efeito do substrato prevalecendo sobre o efeito eletrônico. / In the last 30 years the parallel growth of the traditional Surface Science, under UHV environment, and Electrochemistry gave rise to a new interdisciplinary field: Surface Science and Electrochemistry. Techniques from both sciences give complementary information. Thus, in tandem, they are able to elucidate many atomic, structural and electronic phenomena, of an electrode in contact with a solution. The main goal of this Dissertation was the fundamental study of the Oxygen-rich Ru(0001) surface through electrochemical and morphologic characterizations using a coupled system which allowed the attachment of a miniature flow cell to UVH-chambers. Initially it is shown the construction and modifications of required equipments for the preparation of the binary system Au-Pt(111) and single crystal RuO2(110) oxide. Attainable morphological STM images demonstrated the anisotropic growth of the RuO2(110) over a Ru(0001) substrate. Results of the electrooxidation of CO on RuO2(110), obtained by means of Cyclic Voltammetry, corroborated theoretical calculations concerning the oxide superficial structure in a humid environment. Model surfaces based on Au, epitaxialy grown on a Pt(111) substrate, were prepared under UHV conditions. Electrochemical data and superficial composition were correlated, confirming that the substrate effect overcomes electronic strain effects.
|
7 |
Design of an Inverse Photoemission Spectrometer for the Study of Strongly Correlated MaterialsMcMahon, Christopher January 2012 (has links)
The design and construction of a state-of-the-art ultra-high vacuum spectrometer for the performance of angle-resolved inverse photoemission spectroscopy is presented. Detailed descriptions of its most important components are included, especially the Geiger-Muller ultraviolet photodetectors. By building on recent developments in the literature, we expect our spectrometer to achieve resolution comparable or superior to that of other prominent groups, and in general be one of the foremost apparatus for studying the momentum dependence of the unoccupied states in strongly correlated materials. Summaries of the theory of angle-resolved inverse photoemission spectroscopy and the basics of ultra-high vacuum science are also included.
|
8 |
Design of an Inverse Photoemission Spectrometer for the Study of Strongly Correlated MaterialsMcMahon, Christopher January 2012 (has links)
The design and construction of a state-of-the-art ultra-high vacuum spectrometer for the performance of angle-resolved inverse photoemission spectroscopy is presented. Detailed descriptions of its most important components are included, especially the Geiger-Muller ultraviolet photodetectors. By building on recent developments in the literature, we expect our spectrometer to achieve resolution comparable or superior to that of other prominent groups, and in general be one of the foremost apparatus for studying the momentum dependence of the unoccupied states in strongly correlated materials. Summaries of the theory of angle-resolved inverse photoemission spectroscopy and the basics of ultra-high vacuum science are also included.
|
9 |
A Liquid-Helium-Free High-Stability Cryogenic Scanning Tunneling Microscope for Atomic-Scale SpectroscopyHackley, Jason 18 August 2015 (has links)
This dissertation provides a brief introduction into scanning tunneling microscopy, and then Chapter III reports on the design and operation of a cryogenic ultra-high vacuum scanning tunneling microscope (STM) coupled to a closed-cycle cryostat (CCC). The STM is thermally linked to the CCC through helium exchange gas confined inside a volume enclosed by highly flexible rubber bellows. The STM is thus mechanically decoupled from the CCC, which results in a significant reduction of the mechanical noise transferred from the CCC to the STM. Noise analysis of the tunneling current shows current fluctuations up to 4% of the total current, which translates into tip-sample distance variations of up to 1.5 picometers. This noise level is sufficiently low for atomic-resolution imaging of a wide variety of surfaces. To demonstrate this, atomic-resolution images of Au(111) and NaCl(100)/Au(111) surfaces, as well as of carbon nanotubes deposited on Au(111), were obtained. Other performance characteristics such as thermal drift analysis and a cool-down analysis are reported. Scanning tunneling spectroscopy (STS) measurements based on the lock-in technique were also carried out and showed no detectable presence of noise from the CCC. These results demonstrate that the constructed CCC-coupled STM is a highly stable instrument capable of highly detailed spectroscopic investigations of materials and surfaces at the atomic-scale.
A study of electron transport in single-walled carbon nanotubes (SWCNTs) was also conducted. In Chapter IV, STS is used to study the quantum-confined electronic states in SWCNTs deposited on the Au(111) surface. The STS spectra show the vibrational overtones which suggest rippling distortion and dimerization of carbon atoms on the SWCNT surface. This study experimentally connects the properties of well-defined localized electronic states to the properties of their associated vibronic states.
In Chapter V, a study of PbS nanocrystals was conducted to study the effect of localized sub-bandgap states associated with surface imperfections. A correlation between their properties and the atomic-scale structure of chemical imperfections responsible for their appearance was established to understand the nature of such surface states.
This dissertation includes both previously published/unpublished and co-authored material.
|
10 |
Emissão de eletrons por efeito de campo em diamante policristalino dopado com boro e desenvolvimento de um novo sistema de ultra alvo vacuo / Electron field emission from boron doped microcrystalline diamond and development of a new ultra high vacuum systemRoos, Mathias 12 October 2007 (has links)
Orientador: Vitor Baranauskas / Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação / Made available in DSpace on 2018-08-11T10:03:42Z (GMT). No. of bitstreams: 1
Roos_Mathias_M.pdf: 4816472 bytes, checksum: 51a357faa29ccbd01723b1d6ca5abf27 (MD5)
Previous issue date: 2007 / Resumo: Na primeira parte deste trabalho amostras de diamante poli-cristalino dopado com boro foram crescidas por deposição química a vapor assistida por filamento quente. As características de emissão de campo foram investigadas. A dopagem (NB) em amostras diferentes foi variada pelo controle da concentração B/C no fluxo de gases durante o processo de crescimento. Os campos limiares (Eth) para emissão de campo foram medidos e relacionados com as concentrações B/C usadas. Assim, a influência das bordas entre os grãos, a dopagem e a morfologia da superfície na emissão de campo foram investigadas. A saturação da dopagem foi observada para altas concentrações B/C. O transporte de cargas através das bordas entre os grãos e as propriedades locais de emissão na superfície foram modeladas por dois mecanismos que afetam a emissão de campo. Correntes de emissão de 500 nA·cm-2 foram obtidas para campos elétricos de 8 V·µm-1. Na segunda parte desta tese, a construção de um novo sistema de ultra alto vácuo (UHV) para realizar medições de emissão de campo é descrita. A construção inclui o projeto integral de uma câmara de UHV com sistema de bombas, conjunto de manipuladores, suportes mecânicos e a infraestrutura do laboratório / Abstract: In the first part of this thesis, the study of field emission properties of hot filament chemical vapor deposited boron doped polycrystalline diamond is described. The doping level (NB) of different samples was varied controlling the B/C concentration in the gas feed during the growth processes. The threshold field (Eth) for electron emission in dependence on different B/C concentrations was measured and the influence of grain boundaries, doping level and surface morphology on the field emission properties was investigated. For high B/C ratios doping saturation was observed. Carrier transport through conductive grains and local emission properties of surface sites figured out to be two independent limiting effects on field emission. Emitter currents of 500 nA·cm-2 were obtained using electric fields less than 8 V·µm-1. In the second part the construction of a new UHV system for field emission measurements is described, including the complete project of a UHV chamber with pump system, manipulators and sample transfer system, mechanical supports and the infrastructural requirements of the laboratory / Mestrado / Eletrônica, Microeletrônica e Optoeletrônica / Mestre em Engenharia Elétrica
|
Page generated in 0.1406 seconds