Ziel dieser Arbeit war, die Auswirkungen von Clocking der Leitreihen eines mehrstufigen Axialverdichters auf Potentiale hinsichtlich der Beeinflussung instationärer und stationärer Effekte zu untersuchen und zum grundlegenden Verständnis der instationären Schaufelinteraktion beizutragen. Dazu wurden über 2000 Leitgitterkonfigurationen vermessen, so dass der Einfluss von Clocking auf den Wirkungsgrad entlang der Kennlinie bei Auslegungsdrehzahl, auf die Schaufelgrenzschichten und auf die Betriebsgrenzen untersucht und dokumentiert werden konnte. Vor allem wurde so eine erhebliche Beeinflussung der Pumpgrenze gefunden, während das Grenzschichtverhalten auf den Schaufeln und der Wirkungsgrad im praktisch relevanten Bereich der Kennlinie kaum verändert wurden. Hauptgegenstand der Untersuchungen war aber der Einfluss von Stator-Clocking auf die instationären Druckverteilungen und die resultierenden instationären Erregerkräfte an den Lauf- und Leitschaufeln. Die Vermessung der Auswirkungen der Positionierung jedes einzelnen Leitgitters wurde genutzt, um durch eine einfache Optimierung zwei geometrische Konfigurationen aller Leitgitter zu entwickeln. Die eine Konfiguration führte zu geringen aerodynamischen Erregerkräften an den Laufschaufeln aller Stufen, während die andere Konfiguration eine gleichmäßig hohe instationäre Anregung zur Folge hatte. Die Unterschiede der instationären Erregerkräfte zwischen den Konfigurationen waren erheblich und über weite Bereiche der Kennlinie unabhängig vom Betriebspunkt, ohne das die Konfiguration der Leitgitter geändert wurde. Für eine umfassende Analyse der periodisch instationären, aerodynamischen Schaufelinteraktion wurden sowohl die Schaufeldruckverteilungen, als auch das Strömungsfeld in den axialen Schaufelzwischenräumen im Mittelschnitt der Beschaufelung für beide Clocking-Konfigurationen zeitgenau vermessen und vergleichend ausgewertet. Aus diesen Analysen konnte mithilfe der Wellenmechanik eine einfache analytische Beschreibung der instationären Interaktion der Potentialfelder der Beschaufelung entwickelt werden. Für eine einzelne Stufe wurde mit diesem Modell die experimentell bestimmte Phasendifferenz der Druckschwankungen auf Druck- und Saugseite auf sehr einfache Weise nachgewiesen. Damit liegt ein einfaches, analytisches Modell für die Beschreibung der komplexen Überlagerung der sich relativ zueinander bewegenden Druckfelder der Beschaufelung axialer Turbomaschinen vor, das für das physikalische Verständnis der instationären Schaufelinteraktion einen wertvollen Beitrag liefert.

<p>  </p> <p>As aviation fuel costs and consumption have continued to rise over recent decades, gas turbine engine manufacturers have sought methods to reduce fuel burn. Manufacturers plan to achieve this by reducing the specific fuel consumption of the machine by increasing the bypass ratio through a reduction of the diameter of the engine core. This presents an opportunity for implementing a centrifugal compressor as the final stage of the high-pressure compressor. The vaned diffuser in a centrifugal compressor stage maintains an integral role in determining the extents of the operating range as well as conditioning the flow for the downstream combustor. Thus, it is critical to understand the aerodynamics and performance of the vaned diffuser across the entire compressor operating range.</p> <p>This investigation focused on seven compressor operating points at the stage’s design corrected speed, which ranged from choked flow to the minimum mass flow rate before rotating stall. Steady-state and unsteady performance data were acquired to study the aerodynamics at each operating point as well as the steady-state performance of the vaned diffuser. Laser Doppler velocimetry, high-frequency pressure transducers, and additive manufacturing techniques were all implemented to acquire data in the research compressor.</p> <p>Unsteady velocity measurements were acquired in the vaneless space and were used to quantify the change in diffuser inlet incidence as the stage mass flow rate changes. The impeller exit jet and wake were compared at each operating point to understand the effect of these flow structures on the spanwise incidence profile. Steady-state performance metrics for the vaned diffuser were compared with the change in incidence to assess the effect of incidence on performance. Maximum static pressure recovery and minimum total pressure loss occurred at the maximum incidence operating point. </p> <p>The chordwise static pressure distribution is critical for health monitoring of the polymer, additive manufactured diffuser vanes. Steady-state and unsteady pressure measurements were acquired along the diffuser vane surface to assess the change in the aerodynamic lift force across the compressor operating range as well as the static pressure differential across the vane leading edge. The maximum unsteady lift on the diffuser vanes was up to 34% greater than the steady-state lift force. Unsteady static pressure differentials across the diffuser vane leading edge were similar to the steady-state values, but they were marginally greater across the entire examined operating range. These unsteady pressure measurements were acquired with high-frequency response pressure transducers installed along the diffuser vane surfaces. These transducers were also used to study the rotating stall and surge behavior of the investigated centrifugal compressor stage. This centrifugal compressor stage exhibits a spike-type rotating stall pattern at the onset of stage instability, which rapidly evolves into full flow reversal with several surge cycles. During these surge cycles, the diffuser vane leading edges are subject to a 20 psid static pressure differential. </p> <p>A computational model was used to predict the compressor flow at three different operating points. This model utilized the BSL-EARSM turbulence model, and it included surface roughness and an experimentally measured shroud thermal profile. The model accurately predicted the diffuser inlet flow angles near the shroud, but it predicted more radial flow near midspan. The diffuser vane leading edge static pressure differential was predicted within 1 psid at higher aerodynamic loading conditions. The differences between the computationally predicted and experimentally measured flow are attributed to difficulties associated with modelling the rate of mixing within the flow.</p>

No description available.

A flapping-wing micro-air-vehicle (FWMAV) represents a complex multi-disciplinary system whose analysis invokes the frontiers of the aerospace engineering disciplines. From the aerodynamic point of view, a nonlinear, unsteady flow is created by the flapping motion. In addition, non-conventional contributors, such as the leading edge vortex, to the aerodynamic loads become dominant in flight. On the other hand, the flight dynamics of a FWMAV constitutes a nonlinear, non-autonomous dynamical system. Furthermore, the stringent weight and size constraints that are always imposed on FWMAVs invoke design with minimal actuation. In addition to the numerous motivating applications, all these features of FWMAVs make it an interesting research point for engineers. In this Dissertation, some challenging points related to FWMAVs are considered. First, an analytical unsteady aerodynamic model that accounts for the leading edge vortex contribution by a feasible computational burden is developed to enable sensitivity and optimization analyses, flight dynamics analysis, and control synthesis. Second, wing kinematics optimization is considered for both aerodynamic performance and maneuverability. For each case, an infinite-dimensional optimization problem is formulated using the calculus of variations to relax any unnecessary constraints induced by approximating the problem as a finite-dimensional one. As such, theoretical upper bounds for the aerodynamic performance and maneuverability are obtained. Third, a design methodology for the actuation mechanism is developed. The proposed actuation mechanism is able to provide the required kinematics for both of hovering and forward flight using only one actuator. This is achieved by exploiting the nonlinearities of the wing dynamics to induce the saturation phenomenon to transfer energy from one mode to another. Fourth, the nonlinear, time-periodic flight dynamics of FWMAVs is analyzed using direct and higher-order averaging. The region of applicability of direct averaging is determined and the effects of the aerodynamic-induced parametric excitation are assessed. Finally, tools combining geometric control theory and averaging are used to derive analytic expressions for the textit{Symmetric Products}, which are vector fields that directly affect the acceleration of the averaged dynamics. A design optimization problem is then formulated to bring the maneuverability index/criterion early in the design process to maximize the FWMAV maneuverability near hover. / Ph. D.

Airplane wings, turbine blades and other structures subjected to air or water flows, can undergo motions depending on their flexibility. As such, the performance of these systems depends strongly on their geometry and material properties. Of particular importance is the contribution of different nonlinear aspects. These aspects can be of two types: aerodynamic and structural. Examples of aerodynamic aspects include but are not lomited to flow separation and wake effects. Examples of structural aspects include but not limited to large deformations (geometric nonlinearities), concentrated masses or elements (inertial nonlinearities) and freeplay. In some systems, and depending on the parameters, the nonlinearities can cause multiple solutions. Determining the effects of nonlinearities of an aeroelastic system on its response is crucial. In this dissertation, different aeroelastic configurations where nonlinear aspects may have significant effects on their performance are considered. These configurations include: the effects of the wake on the flutter speed of a wing placed under different angles of attack, the impacts of the wing rotation as well as the aerodynamic and structural nonlinearities on the flutter speed of a rotating blade, and the effects of the recently proposed nonlinear energy sink on the flutter and ensuing limit cycle oscillations of airfoils and wings. For the modeling and analysis of these systems, we use models with different levels of fidelity as required to achieve the stated goals. We also use nonlinear dynamic analysis tools such as the normal form to determine specific effects of nonlinearities on the type of instability. / Ph. D.

A dynamical system approach is utilized to reduce the representation order of unsteady fluid flows and fluid-structure interaction systems. This approach allows for significant reduction in the computational cost of their numerical simulations, implementation of optimization and control methodologies and assessment of their dynamic stability. In the first chapter, I present a new Lagrangian function to derive the equations of motion of unsteady point vortices. This representation is a reconciliation between Newtonian and Lagrangian mechanics yielding a new approach to model the dynamics of these vortices. In the second chapter, I investigate the flutter of a helicopter rotor blade using finite-state time approximation of the unsteady aerodynamics. The analysis showed a new stability region that could not be determined under the assumption of a quasi-steady flow. In the third chapter, I implement the unsteady vortex lattice method to quantify the effects of tail flexibility on the propulsive efficiency of a fish. I determine that flexibility enhances the propulsion. In the fourth chapter, I consider the stability of a flapping micro air vehicle and use different approaches to design the transition from hovering to forward flight. I determine that first order averaging is not suitable and that time periodic dynamics are required for the controller to achieve this transition. In the fifth chapter, I derive a mathematical model for the free motion of a two-body planar system representing a fish under the action of coupled dynamics and hydrodynamics loads. I conclude that the psicform fish family are inherently stable under certain conditions that depend on the location of the center of mass. / Ph. D. / We present modeling approaches of the interaction between flying or swimming bodies and the surrounding fluids. We consider their stability as they perform special maneuvers. The approaches are applied to rotating blades of helicopters, fish-like robots, and micro-air vehicles. We develop and validate a new mathematical representation for the flow generated by moving or deforming elements. We also assess the effects of fast variations in the flow on the stability of a rotating helicopter blade. The results point to a new stable regime for their operation. In other words, the fast flow variations could stabilize the rotating blades. These results can also be applied to the analysis of stability of rotating blades of wind turbines. We consider the effects of flexing a tail on the propulsive force of fish-like robots. The results show that adding flexibility enhances the efficiency of the fish propulsion. Inspired by the ability of some birds and insects to transition from hovering to forward motion, we thoroughly investigate different approaches to model and realize this transition. We determine that no simplification should be applied to the rigorous model representing the flapping flight in order to model transition phenomena correctly. Finally, we model the forward-swim dynamics of psciform and determine the condition on the center of mass for which a robotic fish can maintain its stability. This condition could help in designing fish-like robots that perform stable underwater maneuvers.

Orientador: Douglas Domingues Bueno / Resumo: Os fenômenos associados aos sistemas aeroelásticos definem uma importante classe de problemas envolvida no projeto de aeronaves. Algumas análises podem ser realizadas utilizando a formulação no domínio da frequência, porém, para alguns problemas específicos a análise no domínio do tempo mostra-se mais conveniente, especialmente para projeto de controladores e inclusão de não linearidades. Em particular, forças aerodinâmicas não estacionárias são tipicamente obtidas no domínio da frequência reduzida. Tais formulações não permitem de maneira direta, através de uma transformada inversa, obter modelos matemáticos no domínio do tempo e, portanto, é necessário o uso de um método de aproximação, como o de Roger-Abel. No entanto, uso deste método de aproximação apresenta algumas lacunas com relação ao significado físico e escolha dos parâmetros de atraso. Desta forma, o presente texto explora a influência dos estados de atraso demonstrando que é responsável pela correção da fase entre o movimento e as forças aerodinâmicas resultantes e, também, propõe uma forma de avaliação da qualidade da aproximação obtida. A partir da aproximação das cargas aerodinâmicas se obtém o modelo matemático do sistema aeroelástico, e através de simulações numéricas computacionais, tem-se a resposta do sistema aeroelástico no domínio do tempo devido à cargas de rajada $1-cosseno$. A partir da análise da resposta à rajada é possível avaliar condições em que a rajada se apresenta de maneira mais crítica para... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The phenomena associated with the aeroelastic systems define an important class of problems involved in aircraft design. Some analyzes may be performed in the frequency domain, however, for some specific problems time domain analysis is more convenient, especially for controller design and the inclusion of nonlinearities. In particular, non-stationary aerodynamic forces are typically obtained in the reduced frequency domain. Such formulations do not allow, by means of an inverse transform, to obtain mathematical models in the time domain, and therefore it is necessary to use an approximation method, such as that of Roger-Abel. However, the use of this approximation method presents some gaps with respect to the physical meaning and choice of lag parameters. In this way, the present text explores the influence of the lag states demonstrating that it is responsible for the correction of the phase between the movement and the resulting aerodynamic forces and also proposes a method to evaluate the quality of the approximation achieved. From the approximation of the aerodynamic loads the mathematical model of the aeroelastic system is obtained, and through computational numerical simulations, has the response of the aeroelastic system in the time domain due to the 1-cosine gust load. From the analysis of the response to the gust, it is possible to evaluate conditions in which the gust is presented in a more critical way for the study system. / Mestre

No description available.

The Counter-Rotating Open Rotors (CROR) are identified as a possible alternative to turbofan engines for middle-range aircrafts. Providing significant fuel savings and reducing the green-house gas emissions, they may lead however to an increased noise radiation due to the absence of nacelle shielding. To properly predict the acoustic radiation of such systems is then mandatory both to reduce the source mechanisms of the isolated engine and to offer an optimal noise installation solution. Such an objective is tackled in the present thesis in two steps. In a first part, the research aims at predicting the tonal noise radiated from the first propeller of CROR mounted on the rear fuselage by means of a pylon (pusher configuration), considering both the pylon-wake and the uniform ow effects. From the Ffowcs Williams & Hawkings' formalism, three noise sources are identified. First the unsteady loading is computed using a similar procedure to the one used for the rotor-rotor wake interaction noise prediction. The velocity deficit in the pylon wake is locally expanded in two-dimensional Fourier gusts in a reference frame attached to the front rotor. The unsteady lift induced by each gust on a blade segment is calculated using a linearized analytical response function that accounts for a realistic geometry. The steady loading is the second source contribution and is evaluated using both a software based on the lifting-line theory and some numerical simulations for different reference source surfaces. Finally the thickness noise due to the blade volume displacement is included in the analysis using Isom's formulation. From the linear acoustic assumptions, all these sources modelled as equivalent acoustic dipoles rotating in a uniformly moving atmosphere are then summed to calculate the far-field noise. The whole methodology is assessed against wind-tunnel test data and reference software predictions. A parametric study considering several pylon positionings and pylon-wake configurations with blowing is performed in order to emphasize the relative contribution of the three noise sources. Secondly, the rotor- rotor wake interaction noise being recognized as the most significant contribution in isolated configuration, its modelling is completed by introducing the dynamics of the vortex occurring near the rear-rotor leading edge. A semi-analytical methodology is developed to determine a vortex attached over a at plate embedded in a uniform ow with incidence. Applied to the case of a rear blade going through a front-rotor wake, it provides a first estimate of the noise contribution of the vortex. / Les hélices contrarotatives constituent une alternative possible aux turboréacteurs pour les avions moyens- courriers. Réduisant significativement la consommation de carburant et les émissions de gaz à effet de serre, ils peuvent néanmoins conduire à un rayonnement sonore accru de par l'absence de carénage. Prédire correctement le rayonnement sonore de telles motorisations est donc indispensable pour réduire les mécanismes sources propres au moteur isolé ou assurer une solution d'installation acoustique optimale. Un tel objectif est abordé dans cette thèse en deux temps. Dans un premier temps, l’étude vise à prédire le bruit tonal rayonné par la première hélice d'un moteur monté à l'arrière du fuselage (configuration dite en pousseur), en considérant les effets du sillage du pylône supportant le moteur et de l'écoulement moyen. Partant du formalisme de Ffowcs Williams & Hawkings, trois sources sonores sont identifiées à cet effet. La charge instationnaire, tout d'abord, est calculée en s'appuyant sur une méthodologie similaire à celle utilisée pour la prédiction du bruit d'interaction de sillages entre les deux rotors. Le déficit de vitesse dans le sillage du mât est décomposé localement en rafales bidimensionnelles dans un repère attaché au rotor amont. La portance instationnaire induite par chaque rafale sur un segment de pale est calculée en utilisant une fonction de réponse analytique linéarisée considérant une géométrie réaliste. Deuxième contribution, la charge stationnaire est évaluée au moyen d'un logiciel s'appuyant sur la théorie de la ligne portante mais également via des simulations numériques pour différentes surfaces sources de référence. Enfin, le bruit d'épaisseur associé au déplacement du volume de la pale est inclus dans l'analyse à partir de la formulation d'Isom. D'après les hypothèses de l'acoustique linéaire, toutes ces sources modélisées comme des dipôles acoustiques tournant dans une atmosphère uniforme en mouvement sont ensuite sommées pour calculer le bruit en champ lointain. L'ensemble de la méthodologie est comparé à des données d'essai et des prédictions d'un logiciel de référence. Une étude paramétrique considérant plusieurs positionnements du pylône et des configurations avec soufflage est effectuée afin de bien mettre en évidence les contributions relatives des trois sources sonores. Dans un deuxième temps, le bruit d'interaction de sillages étant reconnu comme la contribution majoritaire en configuration isolée, sa modélisation est complétée en introduisant la dynamique du tourbillon se développant au voisinage du bord d'attaque du rotor aval. Une méthodologie semi-analytique est développée pour déterminer un tourbillon attaché au-dessus d'une plaque plane plongée dans un écoulement uniforme avec incidence. Appliquée au cas d'une pale aval traversant le sillage du rotor amont, elle fournit une première estimation de la contribution sonore du tourbillon.