Vertical Takeoff and Landing (VTOL) Unmanned Aerial Vehicles (UAVs) possess several beneficial attributes, including requiring minimal space to takeoff, hover, and land. The tailsitter is a type of VTOL airframe that combines the benefits of VTOL capability with the ability to achieve efficient horizontal flight. One type of tailsitter, the Quadrotor Biplane (QRBP), can transition the vehicle from hover as a quadrotor to horizontal flight as a biplane. The vehicle used in this thesis is a QRBP designed with special considerations for fully autonomous operation in an outdoor environment in the presence of model uncertainties. QRBPs undergo a rotation of 90° about its pitch axis during transition from vertical to horizontal flight that induces strong aerodynamic forces that are difficult to model, thus necessitating the use of a robust control method to overcome the resulting uncertainties in the model. A feedback-linearizing controller augmented with an H-Infinity robust control is developed to regulate the altitude and pitch angle of the vehicle for the whole flight regime, including the ascent, transition forward, and landing. The performance of the proposed control design is demonstrated through numerical simulations in MATLAB and outdoor flight tests. The H-Infinity controller successfully tracks the prescribed trajectory, demonstrating its value as a computationally inexpensive, robust control technique for QRBP tailsitter UAVs. / Master of Science / Vertical Takeoff and Landing (VTOL) Unmanned Aerial Vehicles (UAVs) are a special type of UAV that can takeoff, hover, and land vertically, which lends several benefits. VTOL aircraft have recently gained popularity due to their potential to serve as fast and efficient payload delivery vehicles for e-commerce. One type of VTOL aircraft, the Quadrotor Biplane (QRBP) combines the ability of a quadrotor aircraft to hover, with the efficient horizontal flight of a biplane. Such a vehicle is able to takeoff and land in confined spaces, and also travel large distances on a single battery. However, the takeoff maneuver of a QRBP involves pitching from vertical to horizontal flight, which causes the vehicle to experience strong aerodynamic effects that are difficult to accurately model. Thus, to autonomously perform this unique maneuver, a robust control technique is necessary. A robust UAV controller is one that functions even when there is a degree of uncertainty in the predicted behavior of the vehicle, such as differences between estimated and actual vehicle parameters, or the presence of external disturbances such as wind. Therefore, a robust controller known as H-Infinity is developed to regulate the altitude and pitch angle of the QRBP as it takes off, transitions to forward flight, flies as a biplane, transitions back to vertical flight, and lands. The performance of the proposed control design is validated using numerical simulations performed in MATLAB, and flight tests. The H-Infinity controller successfully tracks the prescribed trajectory, demonstrating its value as a reliable, computationally inexpensive, robust control technique for QRBP UAVs.

Tailsitter UAVs (Unmanned Aerial Vehicles) are a type of VTOL (Vertical Take off and Landing) aircraft that combines the agility of a quadrotor drone with the endurance and speed of a fixed-wing aircraft. For this reason, they have become popular in a wide range of applications from tactical surveillance to parcel delivery. This thesis details a clean sheet design process for a tailsitter UAV that includes the dynamic modeling, control design, simulation, vehicle design, vehicle prototype fabrication, and testing of a tailsitter UAV. The goal of this process was to design a robust controller that is able to handle uncertainties in the system's parameters and external disturbances and subsequently can control the vehicle through the transition between vertical and horizontal flight regimes. It is evident in the literature that most researchers choose to model and control tailsitter UAVs using separate methods for the vertical and horizontal flight regimes and combine them into one control architecture. The novelty of this thesis is the use of a single dynamical model for all flight regimes and the robust control technique used. The control algorithm used for this vehicle is a MRAC (Model Reference Adaptive Control) law, which relies on reference models and gains that adapt according to the vehicle's response in all flight regimes. To validate this controller, numerical simulations in Matlab and flight tests were conducted. The combination of these validation methods confirms our adaptive controller's ability to control the transition between the vertical and horizontal flight regimes when faced with both parametric uncertainties and external disturbances. / Master of Science / Unmanned aircrafts have been a topic of constant research and development recently due to their wide range of applications and their ability to fly without directly involving pilots. More specifically, VTOL UAVs have the advantage of being able to take off without a runway while retaining the efficiency of a classical aircraft. A tailsitter UAV behaves as a traditional quadrotor drone when in its vertical configuration and can rotate to a horizontal configuration, where it takes advantage of its wings to fly as a conventional aircraft. Modeling the dynamics of the tailsitter UAV and designing an autopilot controller is the main focus of this thesis. An adaptive controller was chosen for the tailsitter UAV due to its ability to modify the gains of the system based on the behavior of the vehicle to adapt to the unknown vehicle properties. This controller was validated using both computer simulations and actual flight tests. It was found that the adaptive controller was able to successfully control the transition between the vertical and horizontal flight regimes despite the uncertainties in the parameters of the vehicle.

When considering the operation of an Unmanned Aerial Vehicle (UAV) or an Unmanned Ground Vehicle (UGV), such problems as landing site estimation or robot path planning become a concern. Deciding if an area of terrain has a level enough slope and a wide enough area to land a Vertical Take Off and Landing (VTOL) UAV or if an area of terrain is traversable by a ground robot is reliant on data gathered from sensors, such as cameras. 3-D models, which can be built from data extracted from digital cameras, can help facilitate decision making for such tasks by providing a virtual model of the surrounding environment the system is in. A stereo vision system utilizes two or more cameras, which capture images of a scene from two or more viewpoints, to create 3-D point clouds. A point cloud is a set of un-gridded 3-D points corresponding to a 2-D image, and is used to build gridded surface models. Designing a stereo system for distant terrain modeling requires an extended baseline, or distance between the two cameras, in order to obtain a reasonable depth resolution. As the width of the baseline increases, so does the flexibility of the system, causing the orientation of the cameras to deviate from their original state. A set of tools have been developed to generate 3-D point clouds from rigid and flexible stereo systems, along with a method for applying corrections to a flexible system to regain distance accuracy in a flexible system. / Master of Science

In order to improve the flight performance of the Martin Jetpack research was undertaken to investigate the aerodynamic issues that were limiting the P-11A Jetpack's flight envelope. Through research of existing ducted-fan aircraft, a flight model describing the unique aerodynamics of the Martin Jetpack was developed using Matlab®/Simulink® software. The dynamic flight model, which can be ran in real time, includes the reactions from: ducted-fans, aircraft body aerodynamics, control surfaces, gyration and landing gear interactions. Abstract Numerous experiments were designed to quantify and validate assumptions used in the development of the model equations. The experiments took advantage of the small size of the Jetpack by designing and building test apparatuses that measured reactions directly on the actual aircraft. This avoided scaling issues that are traditionally encountered when employing wind tunnels for aerodynamic measurements. Abstract Implementing the experimental results into the model led to the modifications of the existing Jetpack airframe to produce the P-11C Jetpack prototype, which significantly improved the performance of the aircraft. The collected flight data was used to validate the model and good agreement was achieved. Abstract Based on this research a new Jetpack prototype (P-12) was developed that combined the flight performance of the P-11C Jetpack with the ability to carry a man or manned sized payload. The model was used to design the layout and to size the control vanes for the P-12 Jetpack. Further research was performed to design larger rotor and stator blades required for the P-12 Jetpack prototype. Abstract The developed model allows the user to efficiently evaluate various control methodologies and changes to key aerodynamic features of the aircraft to aid in the design and flying of the Martin Jetpack. Abstract The outcome of this research is a better understanding of the ducted-fan technology, and via the development of the Jetpack flight model, correctly applying this understanding to improve the Jetpack's flight performance.

Autonomous aerial transportation has multiple potential applications including emergency cases and rescue missions where ground intervention may be difficult. In this context, the following work will address the control of multi-agent Vertical Take-off and Landing aircraft (VTOL) transportation system. We develop a decentralized method. The advantage of such a solution is that it can provide better maneuverability and lifting capabilities compared to existing systems. First, we consider a cooperative group of VTOLs transporting one payload. The main idea is that each agent perceive the interaction with other agents as a disturbance while assuming a negotiated motion model and imposing certain magnitude bounds on each agent. The theoretical model will be then validated using a numerical simulation illustrating the interesting features of the presented control method. Results show that under specified disturbances, the algorithm is able to guarantee the tracking with a minimal error. We describe a toolbox that has been developed for this purpose. Then, a system of multiple VTOLs lifting payloads will be studied. The algorithm assures that the VTOLs are coordinated with minimal communication. Additionally, a novel gripper design for ferrous objects is presented that enables the transportation of ferrous objects without a cable. Finally, we discuss potential connections to human in the loop transportation systems.

There are two traditional aircraft categories: fixed-wing which have a long endurance and a high cruise airspeed and rotorcraft which can take-off and land vertically. The tailsitter is a type of aircraft that has the strengths of both platforms, with no additional mechanical complexity, because it takes off and lands vertically on its tail and can transition the entire aircraft horizontally into high-speed flight. In this dissertation, we develop the entire control system for a tailsitter with a ducted fan. The standard method to compute the quaternion-based attitude error does not generate ideal trajectories for a hovering tailsitter for some situations. In addition, the only approach in the literature to mitigate this breaks down for large attitude errors. We develop an alternative quaternion-based error method which generates better trajectories than the standard approach and can handle large errors. We also derive a hybrid backstepping controller with almost global asymptotic stability based on this error method. Many common altitude and airspeed control schemes for a fixed-wing airplane assume that the altitude and airspeed dynamics are decoupled which leads to errors. The Total Energy Control System (TECS) is an approach that controls the altitude and airspeed by manipulating the total energy rate and energy distribution rate, of the aircraft, in a manner which accounts for the dynamic coupling. In this dissertation, a nonlinear controller, which can handle inaccurate thrust and drag models, based on the TECS principles is derived. Simulation results show that the nonlinear controller has better performance than the standard PI TECS control schemes. Most constant altitude transitions are accomplished by generating an optimal trajectory, and potentially actuator inputs, based on a high fidelity model of the aircraft. While there are several approaches to mitigate the effects of modeling errors, these do not fully remove the accurate model requirement. In this dissertation, we develop two different approaches that can achieve near constant altitude transitions for some types of aircraft. The first method, based on multiple LQR controllers, requires a high fidelity model of the aircraft. However, the second method, based on the energy along the body axes, requires almost no aerodynamic information.

A novel application is presented for a fault-tolerant adaptive model predictive control system for small-scale helicopters. The use of a joint Extended Kalman Filter, (EKF), for the estimation of the states and parameters of the UAV, provided the advantage of implementation simplicity and accuracy. A linear model of a small-scale helicopter was utilized for testing the proposed control system. The results, obtained through the simulation of different fault scenarios, demonstrated that the proposed scheme was able to handle different types of actuator and system faults effectively. The types of faults considered were represented in the parameters of the mathematical representation of the helicopter. Benefits provided by the proposed fault-tolerant adaptive model predictive control systems include: The use of the joint Kalman filter provided a straightforward approach to detect and handle different types of actuator and system faults, which were represented as changes of the system and input matrices. The built-in adaptability provided for the handling of slow time-varying faults, which are difficult to detect using the standard residual approach. The successful inclusion of fault tolerance yielded a significant increase in the reliability of the UAV under study. A byproduct of this research is an original comparison between the EKF and the Unscented Kalman Filter, (UKF). This comparison attempted to settle the conflicting claims found in the research literature concerning the performance improvements provided by the UKF. The results of the comparison indicated that the performance of the filters depends on the approximation used for the nonlinear model of the system. Noise sensitivity was found to be higher for the UKF, than the EKF. An advantage of the UKF appears to be a slightly faster convergence.

<p>The market for vertical takeoff and landing unmanned aerial vehicles, VTOL UAVs, is growing rapidly. To reciprocate the demand of VTOL UAVs in offshore applications, CybAero has developed a novel concept for landing on moving objects called MALLS, Mobile Automatic Launch and Landing Station. MALLS can tilt its helipad and is supposed to align to either the horizontal plane with an operator adjusted offset or to the helicopter skids. Doing so, eliminates the gyroscopic forces otherwise induced in the rotordisc as the helicopter is forced to change attitude when the skids align to the ground during landing or when standing on a jolting boat with the rotor spun up. This master’s thesis project is an attempt to get the concept of MALLS closer to a quarter scale implementation. The main focus lies on the development of the measurement methods for achieving the references needed by MALLS, the hori- zontal plane and the plane of the helicopter skids. The control of MALLS is also discussed. The measurement methods developed have been proved by tested implementations or simulations. The theories behind them contain among other things signal filtering, Kalman filtering, sensor fusion and search algorithms. The project have led to that the MALLS prototype can align its helipad to the horizontal plane and that a method for measuring the relative attitude between the helipad and the helicopter skids have been developed. Also suggestions for future improvements are presented.</p>

This thesis deals with the development of a Conceptual Design Tool for unmanned helicopters, so called VTOL UAVs. The goal of the Design Tool is: • Quick results • Good accuracy • Easy to use The two first points of the goal are actually more or less dependent on each other. In almost all cases a high accuracy gives a slow calculator and vice versa. In order to fulfill the goal a compromise between calculation accuracy and calculation time needs to be done. To make the Design Tool an easy to use program a graphical user interface is used. The graphical user interface allows the user to systematically work his way thru the program from a fictive mission to a complete design of a helicopter. The pre-requirements on the user have been eliminated to a minimum, but for the advanced user the possibilities to create more specific and complex helicopters are good. In order to develop a Conceptual Design Tool the entire helicopter needs to be seen as a complete system. To see the helicopter as a system all of the sub parts of a helicopter need to be studied. The sub parts will be compared against each other and some will be higher prioritized than other. The outline of this thesis is that it is possible to make a user friendly Conceptual Design Tool for VTOL UAVs. The design procedure in the Design Tool is relatively simple and the time from start to a complete concept is relatively short. It will also be shown that the calculation results have a good agreement with real world flight test data.

The market for vertical takeoff and landing unmanned aerial vehicles, VTOL UAVs, is growing rapidly. To reciprocate the demand of VTOL UAVs in offshore applications, CybAero has developed a novel concept for landing on moving objects called MALLS, Mobile Automatic Launch and Landing Station. MALLS can tilt its helipad and is supposed to align to either the horizontal plane with an operator adjusted offset or to the helicopter skids. Doing so, eliminates the gyroscopic forces otherwise induced in the rotordisc as the helicopter is forced to change attitude when the skids align to the ground during landing or when standing on a jolting boat with the rotor spun up. This master’s thesis project is an attempt to get the concept of MALLS closer to a quarter scale implementation. The main focus lies on the development of the measurement methods for achieving the references needed by MALLS, the hori- zontal plane and the plane of the helicopter skids. The control of MALLS is also discussed. The measurement methods developed have been proved by tested implementations or simulations. The theories behind them contain among other things signal filtering, Kalman filtering, sensor fusion and search algorithms. The project have led to that the MALLS prototype can align its helipad to the horizontal plane and that a method for measuring the relative attitude between the helipad and the helicopter skids have been developed. Also suggestions for future improvements are presented.