1 |
Modeling, Simulation, and Injection of Camera Images/Video to Automotive Embedded ECU : Image Injection Solution for Hardware-in-the-Loop TestingLind, Anton January 2023 (has links)
Testing, verification and validation of sensors, components and systems is vital in the early-stage development of new cars with computer-in-the-car architecture. This can be done with the help of the existing technique, hardware-in-the-loop (HIL) testing which, in the close loop testing case, consists of four main parts: Real-Time Simulation Platform, Sensor Simulation PC, Interface Unit (IU), and unit under test which is, for instance, a Vehicle Computing Unit (VCU). The purpose of this degree project is to research and develop a proof of concept for in-house development of an image injection solution (IIS) on the IU in the HIL testing environment. A proof of concept could confirm that editing, customizing, and having full control of the IU is a possibility. This project was initiated by Volvo Cars to optimize the use of the HIL testing environment currently available, making the environment more changeable and controllable while the IIS remains a static system. The IU is an MPSoC/FPGA based design that uses primarily Xilinx hardware and software (Vivado/Vitis) to achieve the necessary requirements for image injection in the HIL testing environment. It consists of three stages in series: input, image processing, and output. The whole project was divided in three parts based on the three stages and carried out at Volvo Cars in cooperation by three students, respectively. The author of this thesis was responsible for the output stage, where the main goal was to find a solution for converting, preferably, AXI4 RAW12 image data into data on CSI2 format. This CSI2 data can then be used as input to serializers, which in turn transmit the data via fiber-optic cable on GMSL2 format to the VCU. Associated with the output stage, extensive simulations and hardware tests have been done on a preliminary solution that partially worked on the hardware, producing signals in parts of the design that could be read and analyzed. However, a final definite solution that fully functions on the hardware has not been found, because the work is at the initial phase of an advanced and very complex project. Presented in this thesis is: important theory regarding, for example, protocols CSI2, AXI4, GMSL2, etc., appropriate hardware selection for an IIS in HIL (FPGA, MPSoC, FMC, etc.), simulations of AXI4 and CSI2 signals, comparisons of those simulations with the hardware signals of an implemented design, and more. The outcome was heavily dependent on getting a certain hardware (TEF0010) to transmit the GMSL2 data. Since the wrong card was provided, this was the main problem that hindered the thesis from reaching a fully functioning implementation. However, these results provide a solid foundation for future work related to image injection in a HIL environment.
|
Page generated in 0.0113 seconds