This diploma thesis describes the design and elaboration of project documentation for realisation of construction of building of Guest house in municipality Ostravice. The building is situated on parcel 649/13 - arable land, in cadastral area Ostravice-1. Guest house is primarily intended for temporary accommodation of tourists in Beskydy mountains. The part of the building is restaurant as well as wellness centre with fitness gym. The building is situated in partially urbanised section of municipality. The access from the local road to parcel n. 470/20 to the main entrance into building will be enabled by newly purpose-built road with turnaround for passenger vehicles. The design respects the local plan and does not deviate from the character of the surrounding built-up area. The building has three above-ground floors and one underground floor, which is situated only under a part of the building. Project documentation is elaborated in conformity with effective laws, public notices and standards. Building of guesthouse is designed as wall system, with brick supporting walls made out of gas-silicate blocks and sand-lime bricks. The guest house is covered by two flat roofs with different inclination and with different height of ridges. The façade consists of stucco and for the third above-ground floor the façade is made out of ventilated larch-wood panelling. The building is placed in flat terrain.

The aim of this diploma thesis is to design a mountain hotel in the village Rokytnice nad Jizernou. The object is placed on a sloping plot located in an attractive touristic and skiing area of mountain range Krkonoše. The mountain hotel has 4 floors and a basement. In the First floor there is a restaurant with a terrace, kitchen and administrative facilities of hotel. In the second and third floor we can find guest rooms and room for the hotel staff. In the basement there is wellness, technical facilities and garage compound. Construction of building is made of the reinforced concrete monolithic transverse frames with beam filling of ceramic block.

The subject of my master´s thesis is a project of a new sports center in Havlíčkův Brod in Humpolecká street on plot no. 2709/3 and 2709/4. The land is sloping and its area is 14 849 square meters. The building has two overground floors and one underground floor. Vertical bearing constructions are designed from the monolitic ferroconcrete columns. Space between colmuns is made up of ceramic blocks. In the underground floor the space is made up of monolitic reinforced concrete. The vertical peripheral structures are provided with an insulation system with ventilated space. The horizontal bearing structures are designed as a monolitic reinforced concrete slabs. The roof is designed single – layer vegetation area. The roof over sports hall is sloping made up of wooden trusses. In south-eastern side of sports centre is designed restaurant with its technical background. In the underground floor there is relaxation part with swimming pool, saunas and massages. The rest of sports center is made up of technical and hygienic background for visitors and employees, and sports grounds, for example badminton courts, climbing wall, squash courts, fitness and 4 sports rooms.

The subject of my diploma thesis is the design of a home for the elderly, a home with a special regime in the form of project documentation for the construction. The house is designed as stand-alone and wheelchair accessible. The building is partly basement, with four above-ground floors. On the first floor there are social and operational spaces of the home for seniors and there is also commercial use. The other above-ground floors include individual client rooms and operational background. The construction system of the whole building is a transverse wall. The building is based on concrete foundation. The external wall is made of clay block and the floor structure is made of cast-in-place reinforced slab. Basement loadbearing masonry is monolithic reinforced concrete. The staircase is a monolithic reinforced concrete and a lift is in the mirror of the staircase. The object is roofed with warm flat roof. Other part of this thesis is an assessment of building physics and fire safety requirements.

The diploma thesis deals with project of a new building of university dormitories in the city center of Brno. It is detached building with basement and four above-ground floors with the irregular rectangular shape. Dormitories can be divided into three fundamental parts. The underground garages can be considered as the first part. Parking places are designed only for students, occasional visitors, and employees. In the underground floor, technical rooms and large warehouse can be found. The second part is designed to the general public including association areas such as reception, coffee-house with outdoor terrace, copy center and tobacco shop. Rooms for students, manager offices, repairman’s room, and laundry can be found in the third part. In total there are 44 two-person rooms and one room for a disabled person on the second floor. The structural system of the building is a cast-in-place concrete frame with a filling of ceramic fittings. The external wall is insulated with mineral wool with a ventilated facade and fiber-cement facade tiles. The building is based on base piles with a pile under each pillar. Vegetation covers a flat roof as well as a part of the north side of the facade. There will also be a public park and two volleyball fields in the area.

The diploma project designs architectural study of Intensive Urban Housing in the city of Brno, district Veveří. Its proposed a building of complex form on vacant site desined by Veveří, Kounicova, Pekárenská and Sokolská Streets which used to be a military grounds. Intensive Urban Housing includes wide community amenities and dwelling for different social groups. As it is located on within walking distance to services which makes the complex self-sufficient, the transport demands are reduced. The proposal works with differentiation of public space, main buildings volumes and facade arrangement that create a lovely city environment and new atractive location in the city of Brno.

The subject of the diploma thesis is the processing of the construction-technical part of the project documentation for the construction of a new kindergarden building in the town of Králíky. The building is divided into two parts - part of the kindergarten and part of the kitchen and laundry facilities. Part of the nursery school consists of three departments, communication space, multipurpose hall and administrative space. In the second part is a cloakroom for staff, kitchen with facilities, laundry and utility rooms. Both parts have separate main entrances. The building consists of two floors and one underground floor. Above part of the nursery school there is a sloping saddle roof structure consisting of wooden nailed trusses. Above the farm part there is a flat single-skin roof with a vegetation layer. The foundation structure under the walls of the building is formed by foundation strips, under the columns the foundation structure is formed by foundation feet. The vertical load-bearing structures are masonry from lime-sand masonry blocks in the above-ground part of the building and in the underground part of the building the vertical load-bearing structure is formed by fittings made of permanent formwork filled with reinforced concrete. Horizontal load-bearing structures are solved by prestressed cavity ceiling panels. The whole building is insulated. In the above-ground part of the nursery school is used contact thermal insulation system with pasty plaster, in the above-ground part of the remaining part of the building is used ventilated facade with fiber-cement facade boards

This thesis presents a design of a new building — hotel, containing thirty accommodation units, space for employees, restaurant and vine bar meant for both customers of the hotel, and public. Hotel is situated in a cadastral area Brod nad Dyjí. Building consists of basement and five floors with proposed accommodation capacity of sixty people. The basement perimeter walls are designed from reinforced concrete with the width of 300 and 400 mm. The walls are insulated by XPS polystyrene which is 220 mm wide. Perimeter walls of the above-ground floors are proposed as a combination of reinforced concrete and reinforced skeleton concrete supplemented by masonry wall of therm type. All these constructions are insulated by 220 mm wide glass wool facade insulation. The building envelope is a light ventilated facade. All horizontal constructions are projected as reinforced concrete slabs with the width of 250 mm. The roof of the building consists of three flat parts. The lowest part of the roof is designed as a vegetation roof with extensive layer. The roof of the hotel is proposed as walkable with wear layer made of concrete pavement of dimension 400 x 400 mm. Construction of the roof above the fifth floor is designed as one layer flat roof on concrete slab with the width of 250 mm. Inside the object are three reinforced concrete staircases (main staircase, emergency staircase and staircase for staff). The main entrance to the object is situated on the south side of the property, while the staff entrances are located on the east and north-east part. Parking for the object customers is placed in front of the main entrance, parking for staff is situated on the north side. This thesis is processed in the form of project documentation for construction realisation.

The subjekt of this diploma thesis is design and project documentation of a kindergarten in city Jihlava. New building is situated in the western part of the city HorníKosov. The kindergarten is designed for preschool education 48 children from 3 to 7 years. The building is without cellar. The building has two floors. In the 1st floor there are two separate classes with sanitary facilities and facilities for teachers. Two separate classes have a common dining room with kachen facilities and sanitary facilities for her employees. In the second floor there is lenguage class for 12 children, storage, directors office, office of speech therapy and sanitary facilities. The object is base on concrete foundation strips. The vertical load-bearing constructions are made of ceramics bricks. The walls are insulated with combination of contact thermal insulation system and ventilated facade with facade cladding of cement-bonded particle board. Ceiling construction is made of prestressed hollow-core slabs. Roof construction over single-storey parts of the building is designed as a vegetation flat roof. Roof construction over the two-storey part of the building is designed as a warm flat roof. Next to the object is situated parking slots for cars. Altogether is designed 13 places, which 1 is designed for disabled people.

The diploma thesis processes project documentation for the construction of a hotel building with a restaurant facility, which is situated on the outskirts of the western undeveloped part of the regional town Jihlava. The building has three floors and is covered by flat roofs. The hotel meets the conditions of a four-star (****) economic standard. It is designed with 24 accommodation units with a capacity of total 52 persons (4 persons with reduced mobility on the 3rd floor) and restaurant service for 92 guests, social facilities and kitchens. The apartments and guest rooms are located on the 2nd and 3rd floor. On the ground floor there is a representative space of the hotel composed of the entrance hall with reception , space for hotel management, space for technical facilities of the building and restaurant with its own kitchen. The building meets the requirements for zero-energy buildings with a combination of a high-quality construction solution with thermal insulation of building and other technological solutions such as photovoltaic power plants or deep boreholes for stepping pump heating The overall character of the building is emphasized by its architectural design in the light of modern lining of the ventilated facade using cement-fiber boards, whose two-color articulation emphasizes both simplicity and shape function of the building. This solution is combined with large glazed areas that give the building a feeling of spaciousness and evocative cleanliness.