The subject of my diploma thesis is the design of a new medical center MEDCEN in the area of the Jihlava hospital, on plot no. 4374/1. The total land area is 22 706 m2. The building has three aboveground and one underground floor. The vertical bearing structure consists of masonry ceramic elements, which are complemented by a monolithic, water-reinforced concrete in the underground floor. Vertical peripheral structures are equipped with thermal insulation system, in the above-ground floors with ventilated facade. The vertical load-bearing structures are made of prefabricated reinforced concrete panels and reinforced by reinforced concrete beams at the local load. The whole building is designed flat single-skin roof with a classic order of layers, where the main waterproofing layer consists of plasticized PVC foils. The layout of the building is divided into left and right wing, which connects the central central part. The entire underground floor is designed to be operational, there are parking spaces for employees, storage facilities and technical facilities of the building. Individual offices, nurses and waiting rooms are designed on all above-ground floors. In the central central part are designed sanitary rooms for visitors and employees. On the first floor is a pharmacy and X-ray examination room. On the third floor there are two office management offices and one-day surgery premises.

Diploma thesis is about design and making of execution project for office city building which is located in Nový Bydžov. The building is located in the late brownfield area of Dufek´s wood manufacture, which is on the south part of Nový Bydžov. The building has four above ground floors and one below ground floor. The building shape is rectangular of dimensions 53,02 x 17,62 m. On the south, west and east is the façade from height of second floor slightly cantilevered. On the east part the edge of cantilevered façade duplicate slopping edge of the bottom land and it creates wonderful but economical shape. The height of the building from the ground is 14,5 m. The shape of roof is flat, covered with the mPVC foil and gravel mound. Façade which covering the first ground floor is made of polystyrene with thin layer of plaster which creates building plinth. Top cantilevered façade is made of ceramic tiles of dimensions 1200 x 600 mm which are suspended behind the air layer. The ceramic tiles are light brown color. In the bottom part are glazed areas of rectangular and square shapes to create the open feeling in the ground floor. In the rear part is designed coffee bar with nice outside wooden terrace. Windows in the top cantilevered part of the façade are the circular shape and extend the architectural impression of the building. All windows are in the same color of dark blue. The steel parts of the building are also dark blue color. In the bellow ground floor are designed underground parking lot with the maximum capacity 29 cars and technical equipment. In the first floor above ground are designed reception, big lecture hall, exhibition hall, coffee bar with terrace and toilets. In the second floor above the ground are offices, computer room and HVAC equipment. In the third above floor are offices, conference hall, and IT equipment. In the fourth floor above the ground are also offices, maintenance room and storage of furniture.

The thesis is dealing with the proposal and processing of project documentation of the Wipeout hotel with the wellness. The proposed object is located in the uptown of Jedovnice. It is a four-storey basement building with vegetation roof and five pitched gabled roofs. The object is visually divided into two parts. The first part is covered with a chipped stone facade. The second part is covered with ventilated facade of wooden blocks of Nordic pine. The foundations of the building are reinforced concrete. Framework, peripheral and dividing walls are designed from POROTHERM system. Ceiling structures are reinforced concrete. The visual idea is the Nordic style, that fits into the surrounding landscape. The object consists of three operating parts namely a restaurant, wellness centre and temporary accommodation.

It is about new-built Retirement center standing alone in the cadaster unit of the town Velké Poříčí. The building has four- floors without basement. It is located in flat terrain near the river in quiet location. The house is built as letter L form. The Retirement center is adapt for disabled people. In the first floor is dining room, doctor´s office, part for employees and technical facilities for house. In the second and third floors are apartments. There are 12 single rooms for one person, 6 single rooms for pair with sleeping in one room and 4 apartments for couple with separated bedroom. In the fourth floor is access to roof terrace. The structural systém of the building is composed of precast concrete frame by Prefa, infill wall from ceramic masonry. Vertical structures are built by prestressed concrete floor slab Spiroll. The building has ventilated facade with mineral wool with facade cladding. The roof is warm flat roof with half intensive green roof.

The thesis deals with the topic of overheating of attic rooms during the summer period. In vast majority of family houses and apartment houses with inhabited attic spaces is the roof solved as lightweight. This kind of roof assembly is not able to sufficiently resist the summer boundary conditions and leads to increased heat gains in the interior. In this work, the attention is drawn entirely to the heat penetration through the roof. Different aspects of passive cooling were applied to the roof and the impact of each change was assessed. This concerns the color of the tiles, thermal accumulation, reflective surfaces and the ventilated air layer. The temperature and velocity profiles in the ventilated cavity were monitored and an analysis of the ventilated cavity efficiency was conducted. For individual analyses was used software – based on the principles of the Finite Element Method or the dynamic simulation software. Also other methods were employed: long-term measurement of temperatures on roof models; short-term measurement of surface temperature of various kinds of roof tiles; and laboratory measurement of reflexivity. Also the effect of insect grilles on the air flow is discussed; which was tested on a ventilator track. In this publication are explained the principles of natural convection; boundary layers and the theory of the coefficient of heat transfer. This work includes a standard of the precise calculation methodology for ventilated roofs which was developed for the purpose of creating a user-friendly guide. The results of individual analyses show, a definitely positive effect of the ventilated cavity on the heat gain reduction of attic rooms. The current technical solution of a roof ridge provides the exhaust of the water vapor from a roof assembly; but for providing ventilation for reducing heat gains is insufficient. This lead to a concept of an innovative roof ridge design which enhances the air exchange between the cavity and outdoor environment.

The assignment of this diploma thesis is design proposal of a new roman catholic church and parsonage with parish centre inside stabilised existing development of slab block housing estate in Nová Líšeň, Brno. The need for church has emerged shortly after completion of the housing development and intensified alongside the growth of believer community created around Salesian centre that has been active in the area since 90’s and focuses on upbringing of youngsters through Don Bosco’s educating methods. Masses have been held so far in the gym of the Salesian centre with about 250 Sunday visitors. The church ought to be designed near the centre and dedicated to Holy spirit so that it serves both community and wider range of believers at the housing estate. The thesis deals with church, parsonage with parish centre and housing development relationship. It’s attempting to answer the question how the church connects to the housing estate and communicates its mission to its surroundings. The design proposal is based on urban context analysis, analysis of Salesian congregation and conditions of the building plot. The composition consists of two functional parts that are connected. First part consists of the church building design with 300 seated and 100 standing visitors capacity per mass and technical support areas. Second functional part is made of the parish centre with community hall for 100 people, educational room, parish offices and accommodation for members of congregation. The design content is supplemented with design of semi-public space, solution to traffic service and parking and design of parish orchard.

The topic of this diploma thesis was to design a winery house in the open landscape in a traditional wine landscape of Mikulov. The designed building serves as a four stars hotel with apartment rooms, restaurant, wellness, wine shop and a small wine farm with a storage of wine. There are unique views to the Mikulov city, Turold hill and surounding vineyards. The longitudinal axe is oriented on northeast–southwest. Majority of rooms, terraces and both atriums are directed on prospective axes. The object has one basement and three groundfloors. It is (situated) into the sloping terrain and constrasts with the wavy landscape of Mikulov for its racional and linear conception. It is inspired by terracced formations in near suroundings and uses it for its mass as well. It creates a new landscape dominant that remainds the geological formation of limestone situated in the surroundings of the Mikulov city. The regular rhytm of windows on facade refers to the Mikulov´s renaissance. The regular placement of window openings, and their rhythm are inspirated by Mikulov renaissance. Smaller holes, glass surfaces, light color of facade, green roof and shielding elements prevent from overheating the object during the summer. The water element in the courtyard offers pleasant refreshment for the visitors.

The aim of this master´s thesis is the elaboration of project documentation for kindergarten with almost zero energy consumption. The project consists of three main parts. The first part is devoted to the civil engineering design of the building. The building is designed regarding to architectural expression, quality of made and type of use. The kindergarten is designed with capacity of 48 children split into two departments. The second part is devoted to the design of HVAC systems. The building uses mechanical ventilation with heat recovery, heating is provided by two gas boilers and the need of electricity is provided by a photovoltaic system. Captured rainwater is used effectively. The third part values the building regarding the method of multi–criteria analysis. For this evaluation uses national method SBToolCZ.

Diploma thesis is focused on design of a new hotel in mountain surrounding with one underground floor and five stories. The hotel has 53rooms for guests from the second to the fifth floor and two rooms for employees of hotel on the fifth floor, what means 106 beds for guests. The hotel is equipped indoor swimming pool 25x10meters, its own kitchen, dining hall, sauna, massages and Conference hall. The object consists of four dilatation units – accommodation sides and common central part and swimming pool. Roof construction is created by huge wooden truss from the second floor to the fifth floor, which sequentially subsides and formed by 70 dormers. Angle of the roof is 46° and 23°, and surface coating is smooth titanium zinc sheet. Load bearing system of whole object is designed as irregular reinforced concrete monolithic skeleton from concrete C30/37 with prestressed elements and based on prestressed reinforced concrete slab. The cladding is designed from ceramic bricks with inner additional insulation and additional insulation on outer surface, which is covered by facade with ventilated air gap, designed from cement-fibers boards, which are by color and structure imitating natural stone. Each accommodation floor is divided into two accommodation sides, central part with central stairs and two personal elevators. Each accommodation side has two protected escape routes and one fire evacuation lift. On the Ground floor, there is the reception, the dining hall, the pool hall and offices. On the underground floor, there is wellness center for guests of the hotel, technologies for the pool, HVAC engine room and kitchen. In all object, there are designed different types of hanging ceilings, because of attendance of stabile sprinkler system. In the pool hall, there will be acoustic hanging ceiling. Heating will be procured by combination of biomass boiler and heat pumps, which will be used mainly for deck heating in rooms in accommodation floors.

The dissertation is composed on theme OF THE SPORTS CENTRE KRUMLOV. In this three-storey building, there is the squash hall, table tennis, fitness hall, sauna for 6 persons and a café. In the garden that belongs to the building, there is projected a course for minigolf, playground for pétanque and tennis court. Constructional system is projected from lime-sand bricks, concrete beam ceilings and glued wooden beams. The roof is flat. External surface finish of the building is the ventilated facade.