This master´s thesis elaborates a project documentation of sports rehabilitation center in Brno–Bystrc. The building object is four-storeyed and a partial basement. On the basement floor there is a pool with sauna, gym and fitness with support to assist for all activities offered. On the ground floor there is an entrance, reception for accommodation, restaurant and kitchen for the restaurant. The 2nd overground floors is determined by the rehabilitation clinic. On the grand and overground floor are designed sanitary appliances for the restaurant and patient surgeries. There are projected 9 apartments for weekend accommodation. Apartments allow access to the terrace. Foundations are made strip foundations. The building object is bricked and insulated with ventilated facades. Load bearing structure of the roof create roof trusses.

The subject of this master´s thesis is the construction of the guest house with restaurant in the village Plumlov near Prostejov. It is a building with a floor partially sunk into the ground and two floors. Basement is designed as part of the restaurant. Floors are designed for the guest house. In the pension there is a total of 6 accommodation rooms with a total capacity of 15 persons. The restaurant has a comfortable dining area for 25 people. The restaurant also includes a kitchen where they will prepare hot meals. Cladding basement of the shuttering and floors are designed as wood house by system "two by four". The ceiling above the restaurant is designed as a system, reinforced concrete, folded (TRAS system). The ceiling above the 1st floor is designed with wooden ceiling beams. The roof is gabled with unbalanced tendencies. The building is based on the foundation strips.

This thesis covers brand new detached sports hall with facilities and restaurants in Walnut Klobouky. Sports hall has a floor partly sunk below the surface, contains grandstand for 340 spectators. The second part, ie background sports hall is in the basement, the ground floor is a restaurant kitchen. The building is designed in plan shape of two rectangles. The roof is gabled and desk. Cladding the halls are ventilated, part of the facilities and restaurants are contact-insulated. Staff restaurant facilities are located in the floor, engine room ventilation are 3, in the hall, first underground floor and first floor. The heat exchanger is designed, which is applied hot water. The finish consists of ceramic tiles in the lobby is used double wood board flooring. The supporting structure consists of prefabricated unit first underground floor SPIROLL.

The aim of this master thesis is proposal of a sport center building. The proposal consists of design of a detached building with room for climbing gym, sauna, massage room and also space for fitness, spinning and yoga. A bar with area for relaxing is a part of the building as well. The sport center has two floors and no basement. Due to the climbing gym, the second floor does not cover all disposition of the second floor. The support system of the building is skeletal. Part of the building´s roof is supported by steel truss frames with purlins, another part with solid panel trusses with purlins. The cieling is made of holoribs and reinforced concrete. The building is covered by single layer roof and has ventilated facade.

The goal of this diploma thesis is to partly elaborate the project documentation of a car repair shop. The building is situated in Hranice (Přerov district) next to the industrial estates near a town part called Nová. It is a three storey building with two aboveground floors and a basement. The building is divided into two parts. The industrial part is designed as prefabricated structure and the non-industrial part is designed to be bricked in Wienerberger Porotherm system. The building is intended for maintenance and repair of racing cars. There are also the office spaces for the company's management and a room for a driving school in the building.

Diploma thesis focuses on the processing of detailed documentation for newly-built mixed-use building in Frýdek-Místek. The building has three above ground floors. On the first floor there is a restaurant with facilities. On the second and third floor there are office spaces. The building has combined support system, which is a reinforced concrete slab carried by masonry wall system of sand-lime blocks and reinforced concrete columns. The entire building is insulated using external contact thermal insulation system outside the first floor, which is designed ventilated facade with thermal insulation of mineral wool. The roof of the building is designed as a non-walkable flat single roof.

The master’s thesis is focused on the construction of new building of technical hinterland DIAMO in Straz pod Ralskem. It is a two-storey building. The building is designed brick with prefab pressed reinforced concrete panels, roofed a flat roof. The work includes technical report, technological regulation for ventilated facade, design a construction site installations, time schedule, control and test plan, itemized budget, fire and safety solutions.

The purpose of this diploma thesis is to prepare the project documentation of the construction part for the building of the kindergarten according to the legal decree number 499/2006 Coll. on construction documentation. Projected building is a detached two-storey building located on the plots number 534/3,534/4, 536, 540/13 in the cadastre unit of Brno-Ivanovice. It is designed as building with storey partly below ground level and has wheechair access to both floor. The structural system of the building is combination of RC wall structures and columns and clay internal masonry. The roofs are designed as intensive green roofs. Designed kindergarten includes three classes for total of 75 children.

The aim of this master´s thesis is a project of a new building of a flat house situated in the cadastral area of Kunstat. The building site is sloping towards south and east. The building is sitting on the suburb of the village and contains three floors above ground level and it partitially includes basement. The purpose of this building is to accommodate foreign pensioners (German, Austrian) as there is demand on the market and in future when the trend changes it will be converted in to normal flat house for young families. The roof is constructed as a flat single skin roof. In the ground floor (basement) there is a surgery, food shop and newsagent, gym, swimming room and utility rooms. A restaurant, kitchen, social room, chapel, utility rooms and employees dressing rooms are situated in the first floor. The flats are accessible only for the flat owners through a door. The following other two storeys includes only flats. For the main wall structural system we have used a shuttered wall system. Documentation has been prepared for this building construction. The graphical part of this documentation has been processed in the AUTOCAD software.

The dissertation deals with construction-technlogical project of Letmo commercial centre in Brno.The building is situated in the city centre. The main task of this thesis was to suggest and solve the question of the constructrion site equipment. That is applied in each construction phase – ground works, recontruction of the steel load-carrying arrangement, reconstruction of pipelines, roof and the ventilated facade. The ventilated facade is very specific in case of this building as that is aired out using air-conditioning system. Moreover, the thesis goes in for works timeline of the shopping centre Letmo, budget according to THU, technological code for ventilated fasade and inspecting and testing schedule.