Spelling suggestions: "subject:"bibration (aeronautics)"" "subject:"bibration (aeronauticas)""
1 |
An investigation of the practicability of tuned pendulum type vibration absorbers for use on rotary wing aircraftGray, R. B. (Robin Bryant) 08 1900 (has links)
No description available.
|
2 |
Modal analysis on a stiffened panel : an application of laser vibrometryJones, Janeen Ayana 08 1900 (has links)
No description available.
|
3 |
A water tunnel investigation of a small scale rotor operating in the vortex ring stateRumsey, Charles B. 06 1900 (has links)
Approved for public release; distribution is unlimited / Motivation to expand the understanding of a helicopter rotor descending into the vortex ring state (VRS) stems from the aircraft mishaps that have plagued the helicopter community. The V-22 has become the most recent victim of encounters with VRS. The onset of VRS is associated with the collapse of the helical vortex wake in the plane of the rotor. The resulting wake disturbances develop an irregular and aperiodic flow. Rotor blade interaction with the disturbed vortices causes large variations in the blade spanwise aerodynamic load distribution. Harmonic analysis of the loading indicates that higher harmonic content becomes prevalent in this state. The dynamic flow similarities achieved in a water tunnel are used to explore flow visualization and conduct vibration analysis of a rotor system operating in the VRS. A scaled rotor system was operated in the NPS Aeronautical Engineering Department's water tunnel. Sensors were used to gather thrust and vibration power spectrum data when operating in VRS. Experimental results correlate with full scale flight data and show a significant increase in the vibration levels of the even multiples of the blade passage frequency. The relative strength of these higher harmonics can be used as an indicator of impending VRS encounters. / Major, United States Marine Corps
|
4 |
A water tunnel investigation of a small scale rotor operating in the vortex ring state /Rumsey, Charles B. January 2003 (has links) (PDF)
Thesis (M.S. in Applied Physics)--Naval Postgraduate School, June 2003. / Thesis advisor(s): E. Roberts Wood, Steven R. Baker. Includes bibliographical references (p. 59-60). Also available online.
|
5 |
FLEXURAL VIBRATION OF BEAMS WITH EXTERNAL VISCOUS DAMPINGMeitz, Robert Otto, 1934- January 1968 (has links)
No description available.
|
6 |
The development of a controlled lateral gust facility for determining the transfer function of a lifting surfaceBartlett, Felton Drew 05 1900 (has links)
No description available.
|
7 |
Non-desctructive investigation & FEA correlation on an aircraft sandwich composite structureBail, Justin L. January 2007 (has links)
Thesis (M.S.)--University of Akron, Dept. of Civil Engineering, 2007. / "December, 2007." Title from electronic thesis title page (viewed 02/25/2008) Advisor, Wieslaw Binienda; Faculty readers, Craig Menzemer, Robert Goldbert; Department Chair, Wieslaw Binienda; Dean of the College, George K. Haritos; Dean of the Graduate School, George R. Newkome. Includes bibliographical references.
|
8 |
A three dimensional elasticity based solution for free vibrations of simultaneously skewed and twisted cantilever parallelepipeds.McGee, Oliver Gregory, III. January 1988 (has links)
This work is the first 3-D continuum study of the free vibration of skewed and simultaneously skewed and twisted, cantilever parallelepipeds. The purpose of this study is to make available in the literature an enlarged data base of natural frequencies of these practical problems for researchers and design engineers to draw upon. The Ritz method is used to determine approximate natural frequency data. The total potential energy of the parallelepipeds is formulated using the three-dimensional theory of elasticity. The three orthogonal displacement components (u,v,w) are each approximated by finite triple series of simple algebraic polynomials with arbitrary coefficients (which are determined by applying the Ritz method). All terms of the series are constructed to satisfy the geometric boundary conditions at the fixed end of the parallelepiped. No other kinematic constraints are imposed in this analysis. Hence, the finite series of algebraic polynomials are both admissible and "mathematically complete" (75). Several convergence studies of natural frequencies are conducted on cantilever parallelepipeds. Effects of geometrical parameters such as side ratio, thickness ratio, skew angle, and twisted angle are presented in the form of nondimensional tables and graphs. Accuracy of solution method is substantiated through comparison with existing rectangular, skewed, and twisted plate results. The central focus of these comparisons are to verify the correctness and accuracy of free vibration data obtained by investigators using classical plate theories and two- and three-dimensional finite element methods.
|
9 |
Non-linear contact analysis of meshing gears a thesis /Lee, Chun Hung. Wu, Xi. January 1900 (has links)
Thesis (M.S.)--California Polytechnic State University, 2009. / Title from PDF title page; viewed on March 2, 2010. Major professor: Xi Wu, Ph.D. "Presented to the faculty of California Polytechnic State University, San Luis Obispo." "In partial fulfillment of the requirements for the degree [of] Master of Science in Mechanical Engineering." "June 2009." Includes bibliographical references (p. 90-91).
|
10 |
Damping of axial instabilities by solid propellant rocket exhaust nozzlesJanardan, Bangalore Ananthamurthy 08 1900 (has links)
No description available.
|
Page generated in 0.084 seconds