The main objective of this study was to describe the overflow of freshwater onto the sea ice surface in the Mackenzie Delta and to investigate the hydraulic behaviour of the upwelling and strudel events. This study was performed from the analysis of data collected during field investigations, from satellite images and from experimental laboratory studies. A forecasting method using the water level in the Mackenzie River was formulated to predict the overflow initiation about five days before its occurrence. The physical modelling of a strudel flow through a circular hole established a relation between the overflow depth and the discharge coefficient. Velocity measurements of the free-surface vortex using an Acoustic Doppler Velocimeter found that velocities at the vortexs core were influenced by its vorticity. Finally, predictions of maximum strudel scour, which are of great importance for the determination of burial depth of pipelines, were predicted from published impinging jet experiments. / Water Resources Engineering

No description available.

No description available.

No description available.

Bibliography: leaves 228-262. / xxvi, 262, [xxvii] leaves : ill. (chiefly col.) ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / This thesis reports on a fundamental investigation of a precessing jet flow which is analogous to that which emanates from the fluidic nozzle. A 'mechanical nozzle' is used to generate a well-defined PJ flow. / Thesis (Ph.D.)--University of Adelaide, Dept. of Mechanical Engineering, 1997?

The relationship between distinctive characteristic fluid-flow regimes and the sound radiation generated by them has been investigated, over a range of Reynolds numbers, for various single plates and two-plate arrays in nominally two-dimensional flows. In preliminary experiments, the characteristics of flow over single plates with rectangular cross-section and faired leading edges and over tandem arrays of an upstream plate with rectangular cross-section and faired leading edges and a downstream plate of rectangular cross-section were investigated, together with the sound radiation produced. However, the main investigation has been concentrated on single plates of rectangular cross-section with various chord-to-thickness ratios C and on arrays of two plates of rectangular cross-section in tandem having various chord-to-thickness ratios C₁ and C₂ and a range of gaps (with gap-to-thickness ratios G) between them. The range of Reynolds number based on plate thickness t and free-stream velocity U, Re[subscript]t = Ut/ν (where ν is the kinematic viscosity of fluid) covered in the measurements is 3.2 x 10[superscript]3 ≤ Re[subscript]t 53 x 10[superscript]3. Spectra of velocity fluctuations in the flow and radiated sound have been measured and their characteristic frequencies related. An attempt has been made to measure force fluctuations on surfaces of the plates in order to relate them to flow characteristics and radiated sound power. Mean and fluctuating pressures associated with the force fluctuations on the plates have also been obtained. The lengths of separation bubbles on long rectangular plates have also been determined. In most cases, the measurements have been complemented by flow-visualisation in a water tunnel to provide additional detailed insight into the flow patterns. Three flow regimes have been identified for single plates of rectangular cross-section. In the first regime (1 ≤ C ≤ 3.13), shear layers separated from the leading edges form a vortex street downstream of the plate without reattachment to it. Associated force fluctuations on the plate are the main source of acoustic radiation. In the second regime (3.05 ≤ C ≤ 9.65), the separated shear layers reattach intermittently to the streamwise plate surfaces. Vortex formation in the shear layer is the dominant cause of sound radiation but the effect becomes weaker as C increases. In the third regime (6.52 ≤ C ≤ 68), the separated shear layers form closed leading-edge separation bubbles. Weak vortex shedding, with only a small contribution to the sound radiation, occurs only at the trailing edges of the plate. Bistable behaviour of the flow over a plate, with random switching between the regimes, occurs for C ≈ 3 and 6.52 ≤ C ≤ 9.65. A proposed classification of possible flow regimes for the flow around two plates of rectangular cross-section in tandem has been confirmed experimentally. For small G, the flow in the gap between the plates is isolated from the external flow. When the gap G between the plates is increased to or beyond a critical value (between 2 and 3.5), the shear layers separated from the upstream plate form a von Karman vortex street in the gap before interacting with the downstream plate. Flow and acoustic measurements indicate that this transition is associated with dramatic changes in the flow character. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1320474 / Thesis (Ph.D.) -- University of Adelaide, School of Mechanical Engineering, 2008

Thesis (Ph.D.)--University of Melbourne, School of Physics, 2003. / Typescript (photocopy). Includes bibliographical references (leaves 121-132).

Thesis (Ph. D.)--Carleton University, 2005. / Includes bibliographical references (p. 259-270). Also available in electronic format on the Internet.

Thesis (M.App.Sc.) - Carleton University, 2005. / Includes bibliographical references (p. 75-76). Also available in electronic format on the Internet.

Thesis (Ph. D.)--Duke University, 2008. / Includes bibliographical references.