Thesis (MScFor)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: Information on the external shape and internal properties of a tree such as the branch structure, tree ring widths and formation, and defects such as resin pockets is important for many forest –and wood science researchers as well as for the forest and wood processing industries. Resin pockets are internal defects associated with some softwood species, and are undesirable in some wood applications such as furniture and veneer. A tool that is often used in research to obtain this information is the Computed Tomography scanner. The high cost of the scanner, as well as the cost of transporting logs to the scanner, limits the application range of this equipment. An alternative, lower cost method would be beneficial for many researchers interested in tree shape and macroscopic internal tree characteristics. The objectives of this study were to: - Design, construct and test a mobile system that can be used in field to obtain a three‐dimensional model of a log or tree stem indicating selected macroscopic internal characteristics and, - Interpret results to explain the occurrence and causes of resin pockets in Pinus patula from the Mpumalanga escarpment, South Africa. A system for dissecting and measuring trees in field was designed, constructed and tested. The metal frame was used to cut a stationary, fixed log into discs and obtain digital images of crosssections along the stem axis. The frame was capable of processing logs with maximum dimensions of 3 m in length and 45 cm in diameter. Software was developed to convert the digital images into three‐dimensional models of logs and trees to demonstrate properties such as the external shape of the trees, branch structure and pith location. Properties such as ring width were measured from the images obtained. The study was conducted in the Mpumalanga escarpment to obtain three‐dimensional models of Pinus patula trees and to establish the reason for formation of resin pockets in these trees. Four 3 m logs from twenty‐four trees from three compartments were dissected and digitally reconstructed into three‐dimensional models. A total of 61 cross sections with resin pockets were identified from the 2750 cross cut images taken 20 cm apart along the longitudinal axis of the log. It was not possible to accept or reject conclusively any of the existing hypotheses for the cause of resin pocket formation. The formation of Type 2 resin pockets was most probably due to felling damage during thinning operations. It seems likely that wind damage and possibly insects might be responsible for the formation of Type 1 resin pockets. / AFRIKAANSE OPSOMMING: Kennis in verband met die interne eienskappe van ‘n boom soos takeienskappe, jaarringwydte en vorm, en harsholtes is belangrik vir sommige bos ‐en houtkundige navorsers. Die toerusting wat huidiglik algemeen gebruik word om inligting van hierdie aard te bekom is ‘n CT skandeerder. Die metode is egter duur as gevolg van hoë kapitale koste van die toerusting sowel as die vervoerkoste van stompe na die CT‐fasiliteit. ‘n Meer ekonomiese alternatief sal vir baie navorsers van waarde wees. Harsholtes in hout lei tot afgradering van hout en fineer. Die doel van die studie was twee‐sydig: - Om ‘n stelsel te ontwerp en bou wat ‘n drie‐dimensionele model van ‘n boom kan skep wat sommige makroskopiese, interne eienskappe weergee, en - Om die voorkoms en oorsaak van harsholtes in Pinus Patula van die Mpumalanga platorand te ondersoek. ‘n Raam is ontwerp en vervaardig wat in die plantasie gebruik word. Die raam kan stompe van tot drie meter lengte met ‘n maksimale diameter van 45 cm hanteer. Die raam is gebruik om snitte deur die stompe te maak, ‘n afstandmeting tot by die gesaagde oppervlak word deur ‘n lasermeter geneem en ‘n kamera neem ‘n foto. Sagteware word dan gebruik vir die uitkenning van sekere dele in elke beeld sowel as die samestelling van ‘n drie‐dimensionele model. Data‐insameling met die raam is in Mpumalanga gedoen. Die raam is in die tydperk getoets en het goed gefunksioneer. Vier stompe elk vanaf vier‐en‐twintig bome vanuit drie afsonderlike kompartemente is verwerk op die raam en volledige drie‐dimensionele modelle geskep vir hierdie bome insluitend hul eksterne vorm, takeienskappe en pitvorm (“pith location”). Ongeveer 2750 foto’s van dwarssnitte is tydens data‐insameling geneem. Net 61 van die foto’s het harsholtes bevat. Geen definitiewe oorsaak van harsholtes kon bepaal word nie. Tipe 2 harsholtes word waarskynlik as gevolg van skade tydens uitdunning van bome gevorm. Wind en insekte lyk na die mees waarskynlike oorsake van Tipe 1 harsholtes.

Thesis (MScFor)--Stellenbosch University, 2013. / ENGLISH ABSTRACT: The practice of combining row and selective thinning in commercial pine plantation silviculture carries the risk of unwanted irregularities in tree distribution within the stand. This situation is aggravated with poor tree selection during marking. The potential consequences of poor tree selection are gaps created along row removals, which are necessary for access to harvesting operations. These gaps lead to spatially asymmetric growing space among adjacent trees. The effect of irregular stand structures on tree morphology and growth are investigated in this study, and are based on two stands of Pinus patula, (Schiede ex Schlechtendal et Cham.) in Langeni plantation, South Africa. This study focuses on two aspects. Firstly, a comparison between trees grown in all-sided and one-sided spatial competition situations in order to assess if there are differences in growth and selected quality parameters. Secondly, the mitigation of irregular structures using a simulation based study on changing the planting geometry in order to investigate the effect on harvesting in terms of stand impact, simulated harvesting productivity and harvesting system costs. Results showed that trees grown in an irregular competitive status have significantly larger crown diameters, crown lengths, longer and thicker branches, disproportionately one sided crown growth and a reduction in space-use efficiency. Simulations indicated that changing planting geometry from the current 2.7m x 2.7m to 2.3m x 3.1m and 2.4m x 3m would result in up to a 20% reduction of machine trail length and fewer rows being removed for machine access. The simulation of harvesting thinnings showed that various planting geometry alternatives increased harvesting productivity by 10% to 20% and reduced overall thinning harvesting cost by up to 11%. This study successfully investigated the factors that potentially negatively affect saw timber quality and volume production of the stand at final felling. It also illustrated the applicability of simulation methods for testing harvesting scenarios and developing economically viable alternatives. / AFRIKAANSE OPSOMMING: Die praktiese kombinasie van ryuitdunning en seleksiedunning in kommersiële denneplantasies dra die risiko van ongewensde onreelmatighede in die verspreiding van bome in die opstand. Hierdie situasie word vererger deur swak boomseleksie tydens die merk van dunnings. Die potensiële gevolge van swak boomseleksie is die ontstaan van onreelmatige gapings tussen boomkrone, veral langs die rydunnings, wat nodig is vir toegang tydens die ontginning van die hout. Dit lei daartoe dat die bome langs die dunningsrye asimmetriese ruimtes het om in te groei. Die effek van onreelmatige opstandstrukture op boom-morfologie en -groei word in hierdie studie ondersoek in twee Pinus patula, (Schiede ex Schlechtendal et Cham.) vakke te Langeni plantasie, Suid-afrika. In die studie word daar gefokus op twee aspekte. Eerstens word bome wat onder toestande van eweredige ruimetlike kompetisie groei vergelyk met die wat onder toestande van eensydige ruimtelike kompetisie groei om sodoende vas te stel of daar verskille is in die groeipatroon aan die hand van geselekteerde gehalteparameters. Tweedens word daar gefokus op die verbetering van onreelmatige opstandstrukture deur gebruik te maak van ’n simulasie-gebasseerde studie om veranderinge in die aanplantingsgeometrie te ondersoek met die doel om die effek van plantspasieering op ontginningsimpakte, gesimuleerde ontginningsproduktiwiteit en -sisteem koste te bepaal. Die resultate het getoon dat bome wat onder toestande van onreelmatige spasieering en kompetisie groei krone met groter deursnee asook langer lengtes ontwikkel, langer en dikker takke het, disproporsionele, eensydige kroongroei en ’n reduksie in ruimte-gebruik toon, wat die groeidoeltreffendheid nadelig beinvloed. Simulasies met betrekking tot die verandering in boomaanplantgeometrie vanaf die huidige 2.7m x 2.7m na 2.3m x 3.1m en 2.4m x 3m het gedui op ’n reduksie van 20% in die masjienpadafstand en na minder rye wat uitgehaal moes word om die toegang van masjiene moontlik te maak. Die simulasie van die ontginning van dunnings het getoon dat verskillende aanplantgeometriealternatiewe die ontginningsproduktiwiteit met 10% tot 20% verbeter het, en die algehele dunningsoeskoste met tot 11% verminder het. In hierdie studie is die faktore, wat die gehalte van saaghoutkwaliteit en volume tydens die finale oes van die plantasie potensieel negatief mag beinvloed, suksesvol ondersoek. Dit illustreer ook die geskiktheid van simulasietoepassings vir die toets van ontginningsalternatiewe en die ontwikkelling van meer ekonomies voordelige praktyke .

Thesis (MScFor)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: The role that forestry plays in climate change mitigation is well recognized by countries that ratified the Kyoto protocol agreement. Though climate change mitigation strategies provide a strong incentive to quantify current patterns of forest carbon sources and sinks, this exercise (carbon accounting) is not as simple as it sounds. This is proven by the vast number of techniques and methodologies available, from models to softwares programmes created in response to the need to estimate carbon sequestration. The study aimed at gaining an understanding of the current carbon sequestration estimation methodology and models in use by the South African Forestry Industry. A survey was undertaken amongst forestry industry stakeholders in which 77% of respondents agreed to the need for a carbon sequestration model for South Africa. This model should have qualities that the forestry industry and all stakeholders agreed with. . A search of freely available models and software was conducted. The aim was to find freely available model(s) that would be readily applicable and adoptable to South African conditions. A Multi Criteria Analysis was carried out using “ideal qualities” for a carbon model as weighting. This resulted in the selection of two models, CASMOFOR and CBM CFS 3, which obtained the highest sum product total from the analysis. These together with FICAT, which came as a recommendation from the questionnaire survey, were compared in the analysis. Carbon values were calculated from yield table volumes by Kotze et al. (2012). A conversion of these volumes to biomass and carbon was done using Dovey (2009) biomass expansion factors and a biomass to carbon conversion value of 0.5 g C/g dry matter, following procedures by Matthews (1993). The first comparison was made on how the model results related to the yield table estimates from Kotze et al. (2012). When carbon values were compared per hectare, it was found that the FICAT model differed significantly from the rest. A second comparison looked at the models’ prediction of the carbon accumulated in NCT’s Enon plantation outside Pietermaritzburg. The Hungarian model, CASMOFOR, was the better predictor as it produced the lowest Mean Squared Error (MSE). Based on the results from the survey and model analysis a number of recommendations can be made regarding the current carbon accounting situation in South Africa. One of the main recommendations is that information sharing among the industry’s stakeholders should improve if the industry is to reach consensus on which methodology to adopt in their business practices. / AFRIKAANSE OPSOMMING: Die rol wat bosbou speel in klimaatsverandering-bekamping is welbekend onder lande wat die Kyoto protokol ooreenkoms onderteken het. Alhoewel klimaatsverandering-bekamping strategieë ‘n sterk aansporing bied om huidige patrone van woudkoolstof bronne en sinkte te kwantifiseer, is hierdie oefening nie so maklik soos dit klink nie. Die bewys hiervan is die groot aantal tegnieke en metodes, wat wissel van modelle tot sagteware programme wat ontwikkel is om koolstofsekwistrasie te meet. Die doelwit van die studie was om die huidige koolstofsekwistrasie metodes en modelle wat deur die Suid Afrikaanse Bosbou Bedryf gebruik word, beter te verstaan. ‘n Vraelysopname is onderneem onder bosbou-industrie deelnemers, waarin 77% van respondente saamgestem het dat dit nodig is dat Suid Afrika ‘n koolstofsekwistrasie model moet hê. Die model moet eienskappe hê waarmee die bosbou-industrie en alle deelnemers saamstem. ‘n Soektog na vrylik beskikbare koolstofmodelle en sagteware programme is onderneem. Die doelwit was om modelle te vind wat geredelik aangepas kan word vir Suid Afrikaanse toestande. ‘n Multi-kriteria analise is uitgevoer met die “ideale eienskappe”vir ‘n koolstofmodel as gewigte. Die resultaat was die seleksie van twee modelle, CASMOFOR en CBM CFS 3, wat die hoogste telling in die ontleding behaal het. Hierdie modelle, tesame met FICAT, wat aanbeveel is deur respondente van die vraelys opname, is vergelyk in ‘n ontleding. Koolstofwaardes is bereken vanaf opbrengstabelle wat deur Kotze et al. (2012) ontwikkel is. Die omsetting van hierdie volumes na biomassa en koolstof is gedoen deur Dovey (2009) se biomassa uitbreidingsfaktore en ‘n biomassa na koolstof omsettings faktor van 0.5 g C/g droëmassa te gebruik (Matthews, 1993). In die eerste vergelyking van die modelle is gekyk hoe die modelle vergelyk met koolstof berekeninge vanaf die Kotze et al. (2012) opbrengstabelle. Wanneer koolstofwaardes per hektaar vergelyk word is gevind dat FICAT beduidend verskil van die ander modelle. In ‘n tweede vergelyking is gekyk na hoe die modelle die koolstof wat in NCT se Enon plantasie buite Pietermaritzburg versamel is, voorspel. Die Hongaarse CASMOFOR model was die beste voorspeller. Anders as die FICAT en CBM CFS 3 modelle het dit die laagste Gemiddelde Vierkante Fout gehad. Na gelang van die resultate van die vraelysopname en die modelontleding kan ‘n aantal aanbevelings gemaak word oor die huidige koolstofberekening situasie in Suid Afrika. Een van die hoof aanbevelings is dat die uitruil van inligting tussen industrie deelnemers moet verbeter as die bedryf eenstemmigheid oor die metode van koolstofberekening wil bereik.

Thesis (MScFor)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: Several studies have shown that stands of invasive alien plants in the natural forest environment can facilitate the rehabilitation and recovery of such forests and challenged the general and global perception that such invasive species threaten the biodiversity and functioning of natural vegetation systems. The aim of this study was to develop an understanding of the dynamics of the spread and establishment of natural forest species in a large stand of the invasive alien plant species Acacia mearnsii (Black wattle) along the Buffeljagsrivier, Western Cape, South Africa. Several patches of Moist forest, Dry forest and Riparian forest occur along the Buffeljagsrivier, above the Buffeljagsrivier dam. The stand of Black wattle consists of 90 ha for a distance of 3.12 km. The main objective was pursued through four specific objectives: (i) to map and assess the patterns in the distribution, size and species composition of the natural forest clusters within the Black wattle stand; (ii) to determine the relationship between natural forest clusters establishing within the Black wattle stand and the neighboring natural forest patches as potential seed sources for the developing forest clusters; (iii) to determine the subsequent spread of natural forest species from the developing forest clusters into the rest of the Black wattle stand; and (iv) to synthesize the information on the dynamics of the spread and establishment of natural forest species into the Black wattle stand as a basis for developing general guidelines for the conversion of invasive alien plant stands in the forest environment towards regrowing natural forest. In total, 329 clusters of natural forest species were GPS recorded and mapped (Arc-GIS) in three zones (Proximal, Intermediate and Distant in relation to the forest patches) within the Black wattle stand: 266 small clusters (one to three reproductively mature trees), 36 medium sized clusters (four to nine trees) and 27 large clusters (more than 10 trees). Large clusters were abundant in the zone close to the natural forest patches and the number of small clusters increased with increasing distance from the forest patches. A total of 28 species of 20 families were recorded. Natural forest species are therefore able to establish within a Black wattle stand. The relationship between natural forest clusters establishing within the Black wattle stand and the natural forest patches as potential seed sources was studied by sampling the stand composition along transects through the stands. A total of 55 rectangular plots (20 m x 10 m, 200 m2) were sampled across forest patches and forest clusters. Hierarchical clustering analysis, using number of stems of a species per plot, identified three main groups and 10 sub-groups. All the sampled forest clusters were included in four of the five Riparian forest sub-groups. Most Moist and Dry forest species were absent from the forest clusters. The three main forest types differed in their general characteristics and site conditions, and this was supported by the ordination analyses: aspect, slope and canopy closure. The developing forest clusters within the Black wattle stand related more to the Riparian forest in terms of similar very gentle south-westerly slope and mean stem diameter. This suggested Riparian forest to be the primary seed source of the establishing forest clusters within the Black wattle stand. However, the large-sized stems of common species were not significantly different between Riparian forest patches and forest clusters, suggesting that large-sized stems in the forest clusters could be part of remnant forest patches, which could act as local seed sources. Detailed evaluation of species importance values and stem diameter distributions showed that some important Moist and Dry forest species are present in the forest clusters. The conclusion was that every type of forest patch contributes to a greater or lesser degree to the development of forest clusters within the Black wattle stand. Seven large clusters were selected to sample the regeneration of natural forest species within 18 m from the forest cluster boundary. Two species lists were generated; one of species from adjacent natural forest patches, and another from 59 forest clusters of all sizes sampled throughout the wattle stand. The results indicated that (1) Mature trees of well-established forest clusters were the main seed sources for the cluster expansion in all directions; (2) Three different patterns were observed in terms of the distance of expansion of regeneration from the clusters: a decrease in regeneration with increasing distance from the cluster margin; increasing regeneration with increasing distance from the cluster; and no distinct pattern with a lack of regeneration of the dominant species of a forest cluster. The 40 species recorded within the Buffeljagsrivier site include a wide range of fruit and seed characteristics. Four main groups of woody species were identified, based on their presence/absence in forest patches and forest clusters. The presence/absence of most species can be explained in terms of their fruit/seed characteristics and dispersal mechanisms. The majority of recorded woody species were most likely dispersed by birds and mammal, particularly Rameron pigeons and baboons. In conclusion, a conceptual framework was developed to guide the rehabilitation of stands of light demanding invasive stands in the forest environment. Several topics for further research were identified. / AFRIKAANSE OPSOMMING: Verskeie studies het gewys dat opstande van uitheemse indringerplante in die woudomgewing kan die rehabilitasie en herstel van sulke woude fasiliteer, en daag die algemene en globale persepsie uit dat sulke indringerplantspecies die biodiversiteit en funksionering van natuurlike plantegroeisisteme bedreig. Die doel van hierdie studie was om ‘n beter begrip te ontwikkel van die dinamika vir die verspreiding en vestiging van inheemse woudspesies binne ‘n omvangryke opstand van die uitheemse indringerplant, Acacia mearnsii (swartwattel), langs die Buffeljagsrivier, Wes-Kaap, Suid Afrika. Verskeie kolle (‘patches’) van Vogtige, Droë- en Oewerwoud kom langs die Buffeljagsrivier voor. Die swartwattel opstand van ongeveer 90 ha groei langs die Buffeljagsrivier oor ‘n afstand van 3.12 km, tussen die dam en die woudkolle aan die stroom-op kant van die swartwattelopstand. Die hoofdoel is nagevolg deur vier spesifieke doelwitte: (i) om die groepies (‘clusters’) vestigende inheemse houtagtige plantsoorte binne die swartwattelbos te karteer en die patrone in hul verspreiding, grootte en spesies samestelling binne die swartwattelopstand te evalueer; (ii) om die verwantskap tussen natuurlike woudgroepies wat binne die swartwattelopstand vestig en die aangrensende woudkolle as potensiële saadbronne vir die ontwikkelende woudgroepies te bepaal; (iii) om die daaropvolgende verspreiding van inheemse woudspesies vanaf die ontwikkelende woudgroepies binne die res van die swartwattelopstand te bepaal; en (iv) om die inligting oor die dinamika van die verspreiding en vestiging van die woudspesies binne-in die swartwattelopstand saam te vat as ‘n basis vir die ontwikkeling van algemene riglyne vir die omskepping van uitheemse indringerplantopstande in die woudomgewing na hergroeiende inheemse woud. In totaal is 329 groepies van inheemse woudspesies aangeteken (via GPS) en gekarteer (Arc-GIS) in drie sones (nabygeleë, intermediêre en afgeleë) binne die swartwattel opstand: 266 klein groepies (een tot drie voortplantingsvolwasse bome), 36 medium-grootte groepies (vier tot nege bome) en 27 groot groepies (10 of meer bome). Groot groepies was volop in die sone naby aan die woudkolle en die aantal klein groepies het toegeneem met toenemende afstand vanaf die woudkolle. ‘n Totaal van 28 species van 20 families is aangeteken, en spesies soos Canthium inerme, Celtis africana, Gymnosporia buxifolia, Rapanea melanophloeos en Vepris lanceolata was algemeen binne die swartwattelopstand. Dit is daarom moontlik vir inheemse woudspesies om binne die swartwattelopstand te vestig. Die verhouding tussen inheemse woudgroepies wat binne die swartwattelopstand vestig en die woudkolle as potensiële saadbronne is bestudeer deur die opstandsamestelling langs transekte deur die opstande te bemonster. ‘n Totaal van 55 reghoekige persele (20 x 10 m, 200 m2) is opgemeet: nege in Droeëwoudkolle, 17 in Vogtige woudkolle, 20 in Oewerwoudkolle, en nege in die woudgroepies binne the swartwattelopstand. Hiërargiese Groeperingsanalise, gebaseer op aantal stamme van ‘n spesies per plot, het drie hoofgroepe en 10 sub-groepe ge-identifiseer: Vogtige woud met drie sub-groepe, Oewerwoud met vyf sub-groepe, en Droeëwoud met twee sub-groepe. Al die gemete woudgroepies is in vier van die Oewerwoud sub-groepe ingesluit. Die meeste Vogtige en Droeëwoud spesies was afwesig van die woudgroepies. Die hoof woudtipes (Droog, Vogtig, Oewer) verskil in hul algemene eienskappe en groeiplektoestande, en dis ondersteun deur die ordinasie-analises: aspek, helling en kroonsluiting. Die ontwikkelende woudgroepies binne die swartwattelopstand was nouer verbonde met Oewerwoud in terme van soortglyke baie geleidelike suid-westelike helling en gemiddelde stamdeursneë. Dit veronderstel dat Oewerwoud is die primêre saadbron van die vestigende woudgroepies binne die swartwattelopstand. Baie inheemse woudspesies kom egter oor die verskillende groepe en sub-groepe voor, met goeie verjonging oor die gemeenskappe. Die stamdeursneë van goter stamme van algemene spesies was niebeduidend verskillend tussen die Oewerwoudkolle en die woudgroepies, en dit veronderstel dat die groter stamme in die woudgroepies kan deel wees van oorblywende woudkolle, wat as plaaslike saadbronne kan dien. Gedetaileerde ontleding van spesies belangrikheidswaardes en stamdeursneëklasverdelings het getoon dat sommige belangrike Vogtige en Droeëwoud spesies is wel teenwoordig in die woudgroepies. Die gevolgtrekking was dat elke tipe woudkol in a mindere of meerdere mate bydra tot die ontwikkeling van die woudgroepies binne die swartwattelopstand. Sewe groot woudgroepies is geselekteer om die woudverjonging binne 18 m vanaf die woudgroepierand te bemonster. Twee spesieslyste is saamgestel; een van spesies van die aangrensende woudkolle, en een van spesies van 59 woudgroepies van alle groottes wat deur die hele swartwattelopstand aangeteken is. Die resultate het aangetoon dat (1) volwasse bome van goed-gevestigde woudgroepies was die hoof saadbronne vir die uitbreiding van die woudgroepies in all rigtings; (2) drie verskillende patrone is waargeneem in terme van die afstand van uitbreiding van verjonging weg vanaf die woudgroepies: ‘n afname in verjonging met toenemende afstand vanaf die groepierand; toenemende verjonging met toenemende afstand vanaf die woudgroepie; en geen beduidende patroon met ‘n gebrek aan verjonging van die dominante spesies van die woudgroepie. Die 40 spesies wat binne die Buffeljagsrivierstudiegebied aangeteken is het ‘n wye reeks vrug- en saadeienskappe ingesluit. Vier hoofgroepe van houtagtige spesies is geïdentifiseer, gebaseer op hul aan- of afwesigheid in die woudgroepies and woudkolle: spesies algemeen in die woudkolle en teenwoordig in die woudgroepies; spesies spesifiek to bepaalde woudkolle en teenwoordig in die woudgroepies; spesies teenwoordig in die woudkolle maar afwesig van die woudgroepies; en spesies afwesig van die woudkolle maar teenwoordig in die woudgroepies. Die aan- of afwesigheid van die meeste spesies kan verduidelik word in terme van hul vrug/saadeienskappe en verspreidingsmeganismes. Die meerderheid van aangetekende houtagtige spesies was meeswaarskynlik deur voëls en soogdiere versprei, veral Geelbekbosduiwe en Bobbejane. Ten slotte, ‘n konsepsuele raamwerk is ontwikkel om die rehabilitasie van opstande van ligafhanklike indringerspesies in die woudomgewing te rig. Verskeie onderwerpe vir verdere navorsing is geïdentifiseer. / RESUME: Plusieurs études ont montré que les peuplements de plantes exotiques envahissantes dans le milieu de forêt naturelle peuvent favoriser la réhabilitation de ces forêts contestant par-là, la perception générale et globale que ces espèces envahissantes menacent la biodiversité et le fonctionnement des systèmes de végétation naturelle. L’objective de cet étude était de mieux comprendre le dynamisme d’établissement et de propagation dans une forêt naturelle des espèces forestières au sein d’un large peuplement de l'espèce de plantes exotiques envahissantes Acacia mearnsii (acacia noir) le long de Buffeljagsrivier, Western Cape, en Afrique du Sud afin d’élaborer des axes directives de réhabilitation relative aux recouvrements d’espèces invasive. La forêt de Buffeljagsrivier s’étale sur un gradient de petites parcelles de forêt allant de forêt sèche, humide et marécageux. Au milieu de ces parcelles de Buffeljagsrivier, on circonscrit un peuplement d’acacia noir estimé à 90 ha sur une distance de 3,12 km. L’objective principal s’est poursuit à travers quatre sous objectives à savoir: (i) cartographier et évaluer les formes d’ invasions dans la distribution, la taille et la composition des recouvrements des espèces de forêt naturelle à l’intérieur du recouvrement d’acacia noir servant comme preuve possible de l’existence et établissement des espèces de forêt naturelle sous un recouvrement d'une espèces invasive; (ii) de déterminer la relation entre les recouvrements de forêt naturelle s’établissant á l’intérieur du peuplement d’acacia noir et ceux de la forêt naturelle avoisinante humide, sèche et marécageuse pouvant être considéré comme sources potentiel de semences conduisant au développement des premiers recouvrement cités; (iii) de déterminer l’étalement subséquent des espèces de la forêt naturelle à partir des recouvrements d’ acacia noir se développant à l’intérieur du reste du peuplement de l’Acacia noir; (iv) Synthétiser les informations sur la dynamique de la propagation et l'établissement d'espèces forestières naturelles dans l’acacia noir comme une base pour l'élaboration des lignes directrices générales pour la conversion de peuplements de plantes exotiques envahissantes se trouvant dans l'environnement de la forêt vers des repousses des forêts naturelles. Au total, 329 recouvrements d'espèces forestières naturelles ont été GPS enregistrées et cartographiées (Arc -GIS) dans trois zones (Proximale, Intermédiaire et Eloignée par rapport aux parcelles de forêt avoisinantes) dans le peuplement de l'acacia noir: 266 petits recouvrements avaient un à trois arbres matures, 36 recouvrements de taille moyenne avaient quatre à neuf arbres matures et 27 larges recouvrements avaient plus de 10 arbres matures. La visualisation de la carte a révélé que les larges recouvrements de forêt mature étaient abondant dans la zone proche des parcelles de forêt naturelle avoisinantes et que de petits recouvrements de jeunes arbres de forêt naturelles croissaient en nombre à mesure que la distance depuis les parcelles de forêts naturelles adjacentes s’élargissait. Un total de 28 espèces appartenant à 20 familles a été répertorié. Deux familles, Rubiaceae suivit de Anacardiaceae ont dominé l’echantillon. Les espèces forestières naturelles sont donc en mesure de s’établir dans un peuplement d'acacia noir. L’échantillon qui a servi à l’évaluation des sources de semences pour le développement des recouvrements de forêt naturelle à travers l’investigation de la relation entre les recouvrements de forêt naturels qui s’établissent à l’intérieur du peuplement d’acacia noir et les parcelles de forêt avoisinantes humide, sèche et marécageuse était constitué de 55 placettes rectangulaires de 200m2 le long de layons à travers le site d’étude. Une analyse hiérarchique des recouvrements réalisée sur la composition des espèces de l’échantillon a révèle que la forêt marécageuse concentre les espèces les plus fréquentes des recouvrements de forêts, et que la majorité des espèces présentes sur les parcelles des forêts sèches et humides étaient absente dans l’ensemble des recouvrements des forêts de l’acaci noir. Les trois principaux types de forêts différaient dans leurs caractéristiques générales et les conditions du site, et cela a été appuyé par l’analyse d’ordinants à partir de trois facteurs environnementaux, la pente, l’angle d’inclinaison par rapport au soleil, et la fermeture de la canopée. Les recouvrements de foret en développement au sein de l'acacia noir se sont trouvés davantage liés à la forêt marécageuse en termes de pente plate orientée sud-ouest et en diamètre moyen des arbres. Ces résultats ont désigné la forêt marécageuse comme la première source potentielle de semences permettant l’établissement des recouvrements de forêt à l’intérieur des peuplements d’acacia noir. Cependant, les souches d’arbres de grande taille des espèces communes entre les parcelles de forêts marécageuses et les recouvrements de forêt dans l’acaci noir n'étaient pas significativement différents, suggérant ainsi que ces arbres de grande taille trouves dans les recouvrements de foret pourraient faire parties des parcelles de forêt subsistantes de la dernière turbulence. Elles pourraient constituer des sources locales de semences. Par ailleurs, une évaluation détaillée des valeurs d'importance des espèces et des distributions des diamètres des souches d’arbres a montré que certaines espèces importantes de forêts humides et sèches sont présentes dans les recouvrements de foret. Finalement l’on conclue que chaque type de parcelles de forêt contribue plus ou moins à l’établissement des recouvrements de forêt dans le peuplement de l'acacia noir. Sept grands recouvrements de foret ont été sélectionnés pour étudier la régénération des espèces forestières naturelles sur un rayon de 18 m depuis la limite du recouvrement de foret. Deux listes d'espèces ont été générées, l'une des espèces de parcelles de forêt naturelle adjacentes, et une autre venant des 59 recouvrements de foret, toutes tailles confondues le long de l'acacia noir. Les résultats ont indiqué que (1) Les recouvrements de forêts, lorsque bien matures et bien établies devenaient les principales sources de semences pour leur expansion sur toutes les directions; (2) Trois allures différentes ont été observées en fonction de la distance de l'expansion de la régénération autour des recouvrements: une diminution de la régénération avec l'augmentation de la distance; une croissance de la régénération avec une distance croissante depuis les revcouvrements de foret, et pas d’allure particulaire voire une absence de régénération de certaines especes pourtant dominant dans les recouvrements de foret. Les 40 espèces recensées sur le site deBuffeljagsrivier comprennent un large éventail de caractéristiques de fruits et de graines. Quatre principaux groupes d'espèces ligneuses ont été identifiées, en fonction de leur présence / absence dans des parcelles de forêt et les recouvrements de forêt. De façon générale, la présence / absence de la plupart des espèces a pu être expliquée en termes de caractéristiques de leur fruits/graines et les mécanismes de dispersion. La majorité des espèces ligneuses enregistrées sont susceptibles d’être dispersées par les oiseaux et les mammifères, en particulier les pigeons rameron et les babouins vues sur le terrain. En conclusion, un cadre conceptuel a été élaboré pour guider la réhabilitation de peuplements envahissants de lumière en milieu forestier. Plusieurs sujets pour des recherches plus poussées ont été identifiés.

Wood is a natural raw material, and would hardly be considered a risk to the environment. However, the handling of wood materials on an industrial scale has been shown to have a negative impact on water bodies that run-off from industrial sites that process wood-based materials. Most investigations related to water pollution from wood-based industries have focused on large industrial sites such as pulp and paper mills. The goal of the present thesisis to understand better such environmental problems and treatment solutions that occur at most wood handling sites. Where there are large outdoor storage areas for logs and sawdust that are exposed to rainfall or irrigation, such as the wooden-floor and bio-energy sectors. Leachate generated by the contact of water with wood in storage areas contains a large amount of organic matter that is potentially hazardous to water bodies that receive run-off from the site. It has been found that different wood species yield different leachate compositions, with leachate from oak having the highest pollutants content, followed by leachate from pine. This investigation shows that oak has the potential to leach about 10 times the amount of polyphenols compared with other investigated species (i.e., pine, beech and maple). Furthermore, oak leachates have the lowest ratio of biological oxygen demand at 7 days tochemical oxygen demand (0.12), which suggests a potential problem with the biological degradation of this leachate. It has also been shown that leachate from wood are potentially toxic to aquatic organisms. Treatability studies with the aim of reducing the environmental impact of wood leachate were conducted on a pilot scale as part of the scope of this thesis. The results showed, among other options, the possibility of using constructed wetlands to treat leachate. It was found that plants and aeration can affect the performance of a wetland. However, the most important factor is the time water spends in the wetland. Filter material that could be used to absorb leachate was also studied. A filter consisting of a mixture of peat and ash (from incinerated organic matter), was used to absorb a specific chemical group (polyphenols) in the leachate. It was also shown that polyphenols are vulnerable to ozone, representing a third viable treatment process. / Trä är ett naturligt råmaterial som knappast anses vara en risk för miljön. Däremot har hanteringen av trämaterial i industriell skala visat sig ha negativ inverkan på vattendrag. De flesta utredningar avseende vattenföroreningar inom träbaserade industrier har fokuserat på stora industrier med stor vattenförbrukning så som massa- och pappersbruk. Lakvatten som alstras vid kontakten mellan vatten och trä innehåller höga halter av organiska ämnen som är potentiellt farliga för vattendrag. Målet med denna avhandling är att få kunskap om ovanstående miljöproblem och möjlig behandlingar av dessa. Förorenat lakvatten skapas av industrier, där stora mängder timmer och sågspån är placerade utomhus och utsätts för regn och bevattning, såsom inom trägolv och bioenergisektorn. Man har funnit att lakning från olika träslag ger olika sammansättningar på lakvattnet, där lakvatten från ek har den högsta halten av föroreningar följt av furu. Denna undersökning visar att ek har potential att laka ut tio gånger så mycket polyfenoler jämfört med andra undersökta arter (tall, bok och lönn). Dessutom har lakvatten från ek den lägsta andelen av biologisk syreförbrukning efter 7dagar per kemisk syreförbrukning (0,12), vilket tyder på ett potentiellt problem med den biologiska nedbrytningen av detta lakvatten. Man har även påvisat att lakvattnet från trä är potentiellt giftigt för akvatiska organismer. Studier för att försöka minska miljöpåverkan av lakvatten från denna trädsort gjordes i pilotskala inom ramen för denna avhandling. Dessa studier visade bland annat på möjligheterna att använda sig av våtmarker som reningsmetod, där växter och luftning påverkar hur bra en våtmark fungerar. Men den viktigaste faktorn var den ökade uppehållstiden som vattnet får i våtmarken. Utöver studier av våtmarker har också ett filtermaterial studerats, filtret bestod av en blandning av torv och aska, som användes för att absorbera en specifik kemisk grupp i lakvattnet (polyfenoler). I en tredje typ av behandlingsprocess visade det sig också att polyfenoler effektivt kan brytas ned av ozon.

In response to the furniture industry’s growing demand for raw material, large volumes of juvenile silver birch and downy birch stems available from pre-commercial thinning operations in Sweden’s forests could offer solutions. However, such stems are not currently used on an industrial scale, and most research conducted on birch stems in general has neither focussed on young trees nor the potential use of the central stem part around the tree pith. The resulting lack of knowledge about the juvenile part of birch wood thus requires additional information about the material properties of birch, which could encourage its use for various purposes in the furniture and other industries. The initial literature review performed for this thesis has highlighted some properties of juvenile birch required for its use as a furniture material, as well as identified topics concerning the physical characteristics of juvenile birch about which knowledge is currently limited. Consequently, the objectives of this thesis were to explore some characteristics of juvenile birch—bark thickness, wood-to-bark bonding ratio after drying, variations in the density and width of growth rings, and anatomical growth response to fertilisation—in order to increase the knowledge. The material studied came from mixed birch and Norway spruce stands at two sites in southern Sweden, namely Asa and Toftaholm. The birch stems were naturally regenerated silver birch and downy birch, with breast height diameters between 30 and 83 mm. Fertilised and unfertilised silver birch trees were sampled at Toftaholm, whereas unfertilised stems of silver birch and downy birch were sampled at Asa. The characteristics of stems from the pith to bark (radial direction) and along the stem (longitudinal direction) were measured. The wood-to-bark bonding ratio on downy birch after drying was calculated as the percentage of the stem circumference with full contact between the wood and bark, while oven-dry density and basic wood density for silver birch were determined by using the water displacement method. The impact of ring width on wood density was statistically analysed, and an image analysis of the wood anatomy was conducted to elucidate their relationship. Amongst the results, bark thickness along the stem had the highest deviation in the section closest to the stump. Moreover, the wood-to-bark bonding ratio after drying measured for juvenile downy birch seemed to depend more on the stem’s diameter than the sampling height along the stem. Such results are relevant for processors seeking to estimate the volume of wood under the bark. The wood-to-bark bonding ratio was highest for diameters between 30 and 39 mm, and neither did that relationship correlate with the sampling height along the stem. Variation in wood density in the radial and longitudinal directions in juvenile silver birch suggested that such density negatively correlated with growth rate (ring width). That relationship held true for stems at each site and between the sites, irrespective of management or growing conditions. As expected, mean wood density was lower in fertilised trees than in unfertilised ones, and towards the bark, radial density increased more in trees that grew more slowly. At the same time, variation in longitudinal density in young silver birch trees was low. Quantitative wood anatomy studies confirmed that the fertilised juvenile birch had younger cambia, thinner cell walls, and fewer vessels per mm2 than unfertilised trees in the same diameter class. Overall, the knowledge generated in the study may facilitate the industrial use of juvenile birch stems and wood in interior and furniture applications. The role of wood anatomy in determining the mechanical performance of juvenile birch stems should be further examined, however, to possibly reveal new opportunities for the use of juvenile birch. / Det finns ett växande behov av råvaror till möbelindustrin. Stammar av juvenil vårtbjörk och glasbjörk finns tillgängliga i stora volymer från röjning i svenska skogar. För närvarande finns det inget storskaligt industriellt nyttjande av det virket. Bättre kunskap om dess virkesegenskaper kan öppna upp möjligheterna till olika användningsområden. Dock har en majoritet av den befintliga björkforskningen ofta exkluderat studier av innersta veden närmast kärnan, vilket resulterat i en låg kunskapsnivå om det juvenila virket. I den inledande litteraturstudien i denna uppsats belyses vilka krav som ställs på materialegenskaperna i möbelvirke. Vidare identifieras befintliga kunskapsluckor i fysiska och mekaniska egenskaper för juvenil björk. Målet med denna uppsats är därför att utforska några egenskaper, såsom barktjocklek, barkvidhäftning efter torkning, densitet och årsringsbreddsvariation samt hur gödsling kan påverka vedanatomin. Materialet kom från blandskogsbestånd med gran och björk i Asa och Toftaholm i Götaland. Björkarna var självföryngrad vårtbjörk och glasbjörk och stammarna hade en brösthöjdsdiameter mellan 30 och 83 mm. I Toftaholm var en del av beståndet gödslad respektive ogödslad vårtbjörk. Från Asa togs stammar av både vårtbjörk och glasbjörk. Virkesegenskaper och dess variationer i stammens radiella och longitudinella riktning studerades. Vidhäftningen av barken till veden efter torkning bedömdes procentuellt på omkretsen av ändträet. Relativ torrdensitet och rådensitet mättes. Påverkan av årsringsbredd på veddensitet analyserades statistiskt och vedanatomin studerades med mikroskop och bildanalys för en vidare förståelse av dess samband med gödsling. Resultaten gällande barktjocklekens variation visade att den nedre delen av stammen hade störst medelavvikelse. Dessa resultat kan vara relevant information för vidareförädling efter avbarkning. Barkens vidhäftning till veden efter torkning mättes på juvenil glasbjörk. Det visade ett visst samband med stamdiameter där den högsta vidhäftningen fanns på stammarna med en diameter mellan 30 och 39 mm. Sambandet var däremot inte korrelerat till stamhöjden där provet togs. Densitetsvariation i radiell och longitudinell riktning studerades för juvenil vårtbjörk. Densiteten hade en svag negativt korrelation till årsringsbredd. Detta samband sågs både inom bestånd och mellan bestånd med olika tillväxtförhållande samt skötsel. Medeldensiteten för virket var, som förväntat, lägre i de gödslade träden jämfört med de ogödslade. I den radiella riktningen  hade det senvuxna virket en högre faktor på densitetsökningen. Den longitudinella densitetsvariationen i unga vårtbjörkar var låg. Kvantitativa vedanatomistudier bekräftade att ungdomsveden i gödslad vårtbjörk hade en lägre kambiumålder, tunnare cellväggstjocklek och färre kärl jämfört med ogödslade träd med samma diameter, resultat som tidigare påvisats för mogen björk. Sammanfattningsvis kan resultaten från den här uppsatsen förbättra kunskapen och därmed underlätta för en industriell användning av juvenila björkstammar inom inredning och möbler. Dock bör vedanatomins påverkan på de mekaniska egenskaperna för juvenila björkstammar studeras vidare. Det kan möjliggöra nya användningsområden för juvenil björk.

Plant cell walls compose the largest source of sugars on earth and are a potential source after conversion for liquid transportation fuels. However, the crystalline region of cellulose and the lignin that incases it present significant obstacles for enzymes to digest. This lowers the sugar yield, which ultimately decreases the production efficiency of bioethanol. A pretreatment that could help lowering the amount of crystallinity; meanwhile, breakdown the matrix of lignin and polysaccharides that cover cellulose fibers would be ideal. Here we propose a physical pretreatment strategy of electron beam irradiation that could potentially decrease cellulose crystallinity as well as unzip the lignin structure. Four types of biomass: cellulose, yellow pine, yellow poplar, and switchgrass were irradiated with a 12 MeV electron beam (Sterigenics, Inc.) at dosages of 0, 54, 80, 148 and 403 kGy. By combining the result from the wet chemical analysis of percent weight glucose/ cellulose from the HPLC, percent crystallinity from the Wide Angle X-Ray Diffraction (WAX) and the change of chemical functionality from Fourier Transform Infrared Spectrometer (FTIR), a promising effect is obtained in pine and yellow poplar but not in cellulose and switchgrass. A significant increase in percent glucose is observed for pine at higher doses as shown by (r = 0.97, P< 0.0076) which are 9.4 and 27% at 0 and 403 kGy. The amount of glucose considerably changes from all different types of biomass over time (P< 0.0001). A strong correlation of decreasing in percent crystallinity was found in poplar (r = -0.89, P< 0.05) from 32.4% to 17.4% and related to an average increase in percent glucose produced from 30 to 55% comparing between 0 and 403 kGy.

This research assessed the influence of hydrologic gradients on woody debris dynamics in a Cumberland Plateau watershed, eastern Kentucky, U.S.A. Although the breakdown of wood can be attributed to several different processes, including leaching, biological decay, fragmentation, and transport, the influence of differing flow regimes has been unstudied. The objectives of this study were to examine how stream channel type (temporary vs. perennial) affected wood processing dynamics (i.e., mass loss and macroinvertebrate colonization and standing stock patterns). Two questions were addressed: (1) do mass loss rates of wood differ across hydrological gradients in stream channels?, and (2) do macroinvertebrate colonization and standing stock patterns vary in relation to hydrologic gradients? Although within each channel type both dry mass and ash free dry mass loss followed a negative exponential model (p < 0.05), there wasn’t a significant between-channel difference in mass loss rates (p > 0.05). Breakdown rates (-k) ranged from 0.133 – 0.194year-1 for perennial streams compared to 0.103 – 0.170year-1 in the temporary streams. Collector-gathers comprised the greatest proportion of macroinvertebrates, accounting for 65.5% (temporary) and 59.3% (perennial) of all taxa colonizing wood bundles, followed by shredders (16.1%, 16.8%), predators (16.8%, 20.1%), (scrapers < 0.1% in both reaches) and filtering collectors (1.2%, 3.7%). Overall, there were no significant between-channel differences for total macroinvertebrate abundance, total macroinvertebrate biomass, and similarly for abundance and biomass of all functional groups. There was a trend, however, of decreasing density and biomass over time of collector-gathers and shredders on wood. Overall, hydrological gradients had no effects on short-term breakdown rates of woody debris or macroinvertebrate colonization patterns. Studies of wood breakdown have been shown to require long study periods (≥ 5 years), therefore, future studies of hydrological gradient may show differing results for woody debris breakdown.

Plant cell walls compose the largest source of sugars on earth and are a potential source after conversion for liquid transportation fuels. However, the crystalline region of cellulose and the lignin that incases it present significant obstacles for enzymes to digest. This lowers the sugar yield, which ultimately decreases the production efficiency of bioethanol. A pretreatment that could help lowering the amount of crystallinity; meanwhile, breakdown the matrix of lignin and polysaccharides that cover cellulose fibers would be ideal. Here we propose a physical pretreatment strategy of electron beam irradiation that could potentially decrease cellulose crystallinity as well as unzip the lignin structure. Four types of biomass: cellulose, yellow pine, yellow poplar, and switchgrass were irradiated with a 12 MeV electron beam (Sterigenics, Inc.) at dosages of 0, 54, 80, 148 and 403 kGy. By combining the result from the wet chemical analysis of percent weight glucose/ cellulose from the HPLC, percent crystallinity from the Wide Angle X-Ray Diffraction (WAX) and the change of chemical functionality from Fourier Transform Infrared Spectrometer (FTIR), a promising effect is obtained in pine and yellow poplar but not in cellulose and switchgrass. A significant increase in percent glucose is observed for pine at higher doses as shown by (r = 0.97, P< 0.0076) which are 9.4 and 27% at 0 and 403 kGy. The amount of glucose considerably changes from all different types of biomass over time (P< 0.0001). A strong correlation of decreasing in percent crystallinity was found in poplar (r = -0.89, P< 0.05) from 32.4% to 17.4% and related to an average increase in percent glucose produced from 30 to 55% comparing between 0 and 403 kGy.

The wood products industry is important to Sweden's prosperity, and is currently facing several challenges by increased global competition. To avoid the gradual decline of the industry’s contribution to the country’s revenues and employment opportunities, the Swedish wood products industry needs to increase the proportion of the raw material that is refined. New and efficient manufacturing technologies are essential to support this development. The implementation of automation in manufacturing needs to be supported by conscious and well-defined strategies. However, currently, there is a lack of knowledge regarding automation decisions in this industry. Therefore, the purpose of this thesis is to increase knowledge regarding which aspects should be taken into account when automation decisions are considered in the wood products industry. Three research questions are addressed: (1) What is the current state of manufacturing operations in the wood products industry? (2) What are the potential opportunities for automation in the wood products industry? And (3) What challenges can arise from automation in the wood products industry? The results presented in this thesis are based on four research papers. The first paper provides an overview of the current state of manufacturing operations in the wood products industry. The second paper examined the impact of the raw material on manufacturing operations in the wood products industry. The third paper assessed how the levels of automation in manufacturing impact operational performance. The fourth paper examined automation opportunities and challenges to gain a better understanding of the reasoning behind automation decisions in the industry. In general, it is concluded that automation decisions in the wood products industry tend to be based on “gut feeling” and previous experience with automation rather than well-defined decisions and strategies. This is due to inadequate knowledge and familiarity with automation technologies in manufacturing. Furthermore, the findings showed that different aspects of manufacturing interact and impact each other. For this reason, it is essential to take into account other aspects of manufacturing when considering automation decisions. / ProWOOD