Pressure and temperature are two environmental variables that are increasingly being exploited by solid-state researchers probing structure-property relationships in the crystalline state. Modern high-pressure apparatus is capable of generating many billions of Pascals in the laboratory, and therefore can produce significantly greater alterations to crystalline materials than changes in temperature, which can typically be varied by only a few thousand Kelvin. Many systems such as single-molecule magnets exhibit interesting properties under low-temperature regimes that can be substantially altered with pressure. The desire by investigators to perform analogous single-crystal X-ray diffraction studies has driven the development of new high-pressure apparatus and techniques designed to accommodate low-temperature environments. [Ni(en)3][NO3]2 undergoes a displacive phase transition from P6322 at ambient pressure to a lower symmetry P6122/P6522 structure between 0.82 and 0.87 GPa, which is characterized by a tripling of the unit cell c axis and the number of molecules per unit cell. The same transition has been previously observed at 108 K. The application of pressure leads to a general shortening of O···H hydrogen bonding interactions in the structure, with the greatest contraction (24%) occurring diagonally between stacks of Ni cation moieties and nitrate anions. A novel Turnbuckle Diamond Anvil Cell designed for high-pressure low-temperature single-crystal X-ray experiments on an open-flow cryostat has been calibrated using the previously reported phase transitions of five compounds: NH4H2PO4 (148 K), ferrocene (164 K), barbituric acid dihydrate (216 K), ammonium bromide (235 K), and potassium nitrite (264 K). From the observed thermal differentials between the reported and observed transition temperatures a linear calibration curve has been constructed that is applicable between ambient-temperature and 148 K. Low-temperature measurements using a thermocouple have been shown to vary significantly depending on the experimental setup for the insertion wire, whilst also adding undesirable thermal energy into the sample chamber which was largely independent of attachment configuration. High-pressure low-temperature single-crystal X-ray diffraction data of [Mn12O12(O2CMe)16(H2O)4] (known as Mn12OAc) reveals a pressure-induced expulsion of the crystallized acetic acid from the crystal structure and resolution of the Jahn-Teller axes disorder between ambient pressure and 0.87 GPa. These structural changes have been correlated with high-pressure magnetic data indicating the elimination of a slow-relaxing isomer over this pressure range. Further application of pressure to 2.02 GPa leads to the expansion of these Jahn-Teller axes, resulting in an enhancement of the slow-relaxing magnetic anisotropy as observed in the literature. Relaxation of pressure leads to a resolvation of the crystal structure and re-disordering of the Jahn-Teller axes, demonstrating that this structural-magnetic phenomenon is fully reversible with respect to pressure. The space group of the Prussian blue analogue Mn3[Cr(CN)6].15H2O has been re-evaluated as R-3m between ambient pressure and 2.07 GPa using high-pressure single-crystal X-ray and high-pressure neutron powder data. Reductions in metal-metal distances and gradual distortions of the Mn octahedral geometry have been correlated with previously reported increases in Tc and declines in ferrimagnetic moment in the same pressure range. Increasing the applied pressure to 2.97 GPa leads to partial amorphization and results in a loss of long-range magnetic order as shown by the literature. The application of pressure (1.8 GPa) to the structure of K2[Pt(CN)4]Br0.24.3.24H2O (KCP(Br)) causes a reduction in the Pt intra-chain and inter-chain distances, and results in an enhancement of the overall conductivity under these conditions as demonstrated in the literature. Almost no changes occur to the high-pressure crystal structure upon cooling to 4 K, except in the Pt-Pt intra-chain distances which converge and suppress the Peierls distortion known to occur at 4 K, resulting in a comparatively greater electrical conductivity under these conditions.

Die vorliegende Arbeit fokussiert auf die Synthese von organisch/anorganischen Hybridmaterialien mit multifunktionalen Eigenschaften unter ausschliesslicher Darstellung dieser Materialen mit Hilfe des „wet chemistry“ Zugangs. Ausgehend von der Darstellung und Charakterisierung von isomorphen bzw. isostrukturellen Hybridmaterialien der allgemeinen Zusammensetzung catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) speziell mittels IR und UV/vis Spektroskopie ist beschrieben, wie sich aus diesen entsprechende bi-, tri-, und auch tetra-heterometallische Koordinationspolymere der allgemeinen Zusammenseztung {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ und x, y, z, t als prozentualer Metallgehalt) herstellen lassen und welche limitierende Faktoren zu berücksichtigen sind. Leifähigkeitsmessungen an Einkristallen ausgewählter Koordinationspolymere werden vorgestellt. Zusätzlich werden die durch Rekristallisation von Nitac erhaltenen zwei verschiedenen Koordinationspolymere der Formel {[Me3NH]3{NiCl4}{NiCl3}}n und {[(Me3NH]{NiCl3}}n in Bezug auf ihre ungewöhnlichen strukturellen und magnetischen Eigenschaften vorgestellt und beschrieben. Die durch Austausch von [Me3NH]+ Kationen gegen [Et3NH]+ bzw. protonierten aromatischen N-haltigen Kationen wie [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ erhaltenen Reaktionsprodukte aus Umsetzungen mit Hilfe des “wet chemistry” Zugangs werden im Hinblick auf ihre Festkörperstrukturen beschrieben. Die erfolgreiche Darstellung einer neuen Familie von perylentetracarboxylato-basierenden Komplexen, die teilweise hervorragende Löslichkeiten besitzen, wird beschrieben sowie die strukturellen, magnetischen und lumineszierenden Eigenschaften ausgewählter Vetreter. / The thesis presented here is focused on the synthesis of organic/ inorganic hybrid materials with multifunctional properties by means of the “wet chemistry” approach. The synthesis and characterization of hybrid materials with the general composition catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) is described. Due to their isomorphic and/ or isostructural character, bi-, tri-, and even tetra-heterometallic chains of the general formula {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ and x, y, z, t is the percentage of each metal content) were synthesized and characterized. Limitating factors of the synthesis of these types of heterometallic coordination polymers are discussed. Furthermore, the conductive properties of selected representatives were investigated. Additionally, the products obtained from recrystallization of Nitac, two different novel 1D coordination polymers of the formula {[Me3NH]3{NiCl4}{NiCl3}}n and {[(Me3NH]{NiCl3}}n are described with respect to their structural and magnetic properties. Efforts to replace the [Me3NH]+ cations of Mtac compounds by [Et3NH]+ cations as well as by protonated aromatic amines as [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ are reported next with respect to the structural exploration of obtained hybrid materials by the “wet chemistry” approach. Finally, the synthesis of a new family of perylene tetracarboxylate (ptc) based soluble complexes is reported. Structural, magnetic and luminescence properties of selected representatives of this new series of soluble ptc derivatives are reported.

Die vorliegende Arbeit fokussiert auf die Synthese von organisch/anorganischen Hybridmaterialien mit multifunktionalen Eigenschaften unter ausschliesslicher Darstellung dieser Materialen mit Hilfe des „wet chemistry“ Zugangs. Ausgehend von der Darstellung und Charakterisierung von isomorphen bzw. isostrukturellen Hybridmaterialien der allgemeinen Zusammensetzung catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) speziell mittels IR und UV/vis Spektroskopie ist beschrieben, wie sich aus diesen entsprechende bi-, tri-, und auch tetra-heterometallische Koordinationspolymere der allgemeinen Zusammenseztung {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ und x, y, z, t als prozentualer Metallgehalt) herstellen lassen und welche limitierende Faktoren zu berücksichtigen sind. Leifähigkeitsmessungen an Einkristallen ausgewählter Koordinationspolymere werden vorgestellt. Zusätzlich werden die durch Rekristallisation von Nitac erhaltenen zwei verschiedenen Koordinationspolymere der Formel {[Me3NH]3{NiCl4}{NiCl3}}n und {[(Me3NH]{NiCl3}}n in Bezug auf ihre ungewöhnlichen strukturellen und magnetischen Eigenschaften vorgestellt und beschrieben. Die durch Austausch von [Me3NH]+ Kationen gegen [Et3NH]+ bzw. protonierten aromatischen N-haltigen Kationen wie [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ erhaltenen Reaktionsprodukte aus Umsetzungen mit Hilfe des “wet chemistry” Zugangs werden im Hinblick auf ihre Festkörperstrukturen beschrieben. Die erfolgreiche Darstellung einer neuen Familie von perylentetracarboxylato-basierenden Komplexen, die teilweise hervorragende Löslichkeiten besitzen, wird beschrieben sowie die strukturellen, magnetischen und lumineszierenden Eigenschaften ausgewählter Vetreter. / The thesis presented here is focused on the synthesis of organic/ inorganic hybrid materials with multifunctional properties by means of the “wet chemistry” approach. The synthesis and characterization of hybrid materials with the general composition catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) is described. Due to their isomorphic and/ or isostructural character, bi-, tri-, and even tetra-heterometallic chains of the general formula {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ and x, y, z, t is the percentage of each metal content) were synthesized and characterized. Limitating factors of the synthesis of these types of heterometallic coordination polymers are discussed. Furthermore, the conductive properties of selected representatives were investigated. Additionally, the products obtained from recrystallization of Nitac, two different novel 1D coordination polymers of the formula {[Me3NH]3{NiCl4}{NiCl3}}n and {[(Me3NH]{NiCl3}}n are described with respect to their structural and magnetic properties. Efforts to replace the [Me3NH]+ cations of Mtac compounds by [Et3NH]+ cations as well as by protonated aromatic amines as [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ are reported next with respect to the structural exploration of obtained hybrid materials by the “wet chemistry” approach. Finally, the synthesis of a new family of perylene tetracarboxylate (ptc) based soluble complexes is reported. Structural, magnetic and luminescence properties of selected representatives of this new series of soluble ptc derivatives are reported.

Die vorliegende Arbeit fokussiert auf die Synthese von organisch/anorganischen Hybridmaterialien mit multifunktionalen Eigenschaften unter ausschliesslicher Darstellung dieser Materialen mit Hilfe des „wet chemistry“ Zugangs. Ausgehend von der Darstellung und Charakterisierung von isomorphen bzw. isostrukturellen Hybridmaterialien der allgemeinen Zusammensetzung catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) speziell mittels IR und UV/vis Spektroskopie ist beschrieben, wie sich aus diesen entsprechende bi-, tri-, und auch tetra-heterometallische Koordinationspolymere der allgemeinen Zusammenseztung {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ und x, y, z, t als prozentualer Metallgehalt) herstellen lassen und welche limitierende Faktoren zu berücksichtigen sind. Leifähigkeitsmessungen an Einkristallen ausgewählter Koordinationspolymere werden vorgestellt. Zusätzlich werden die durch Rekristallisation von Nitac erhaltenen zwei verschiedenen Koordinationspolymere der Formel {[Me3NH]3{NiCl4}{NiCl3}}n und {[(Me3NH]{NiCl3}}n in Bezug auf ihre ungewöhnlichen strukturellen und magnetischen Eigenschaften vorgestellt und beschrieben. Die durch Austausch von [Me3NH]+ Kationen gegen [Et3NH]+ bzw. protonierten aromatischen N-haltigen Kationen wie [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ erhaltenen Reaktionsprodukte aus Umsetzungen mit Hilfe des “wet chemistry” Zugangs werden im Hinblick auf ihre Festkörperstrukturen beschrieben. Die erfolgreiche Darstellung einer neuen Familie von perylentetracarboxylato-basierenden Komplexen, die teilweise hervorragende Löslichkeiten besitzen, wird beschrieben sowie die strukturellen, magnetischen und lumineszierenden Eigenschaften ausgewählter Vetreter. / The thesis presented here is focused on the synthesis of organic/ inorganic hybrid materials with multifunctional properties by means of the “wet chemistry” approach. The synthesis and characterization of hybrid materials with the general composition catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) is described. Due to their isomorphic and/ or isostructural character, bi-, tri-, and even tetra-heterometallic chains of the general formula {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ and x, y, z, t is the percentage of each metal content) were synthesized and characterized. Limitating factors of the synthesis of these types of heterometallic coordination polymers are discussed. Furthermore, the conductive properties of selected representatives were investigated. Additionally, the products obtained from recrystallization of Nitac, two different novel 1D coordination polymers of the formula {[Me3NH]3{NiCl4}{NiCl3}}n and {[(Me3NH]{NiCl3}}n are described with respect to their structural and magnetic properties. Efforts to replace the [Me3NH]+ cations of Mtac compounds by [Et3NH]+ cations as well as by protonated aromatic amines as [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ are reported next with respect to the structural exploration of obtained hybrid materials by the “wet chemistry” approach. Finally, the synthesis of a new family of perylene tetracarboxylate (ptc) based soluble complexes is reported. Structural, magnetic and luminescence properties of selected representatives of this new series of soluble ptc derivatives are reported.

Die vorliegende Arbeit fokussiert auf die Synthese von organisch/anorganischen Hybridmaterialien mit multifunktionalen Eigenschaften unter ausschliesslicher Darstellung dieser Materialen mit Hilfe des „wet chemistry“ Zugangs. Ausgehend von der Darstellung und Charakterisierung von isomorphen bzw. isostrukturellen Hybridmaterialien der allgemeinen Zusammensetzung catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) speziell mittels IR und UV/vis Spektroskopie ist beschrieben, wie sich aus diesen entsprechende bi-, tri-, und auch tetra-heterometallische Koordinationspolymere der allgemeinen Zusammenseztung {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ und x, y, z, t als prozentualer Metallgehalt) herstellen lassen und welche limitierende Faktoren zu berücksichtigen sind. Leifähigkeitsmessungen an Einkristallen ausgewählter Koordinationspolymere werden vorgestellt. Zusätzlich werden die durch Rekristallisation von Nitac erhaltenen zwei verschiedenen Koordinationspolymere der Formel {[Me3NH]3{NiCl4}{NiCl3}}n und {[(Me3NH]{NiCl3}}n in Bezug auf ihre ungewöhnlichen strukturellen und magnetischen Eigenschaften vorgestellt und beschrieben. Die durch Austausch von [Me3NH]+ Kationen gegen [Et3NH]+ bzw. protonierten aromatischen N-haltigen Kationen wie [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ erhaltenen Reaktionsprodukte aus Umsetzungen mit Hilfe des “wet chemistry” Zugangs werden im Hinblick auf ihre Festkörperstrukturen beschrieben. Die erfolgreiche Darstellung einer neuen Familie von perylentetracarboxylato-basierenden Komplexen, die teilweise hervorragende Löslichkeiten besitzen, wird beschrieben sowie die strukturellen, magnetischen und lumineszierenden Eigenschaften ausgewählter Vetreter. / The thesis presented here is focused on the synthesis of organic/ inorganic hybrid materials with multifunctional properties by means of the “wet chemistry” approach. The synthesis and characterization of hybrid materials with the general composition catena-{[Me3NH][MCl3·2H2O]}n (Mtac) (MII = Mn, Co, Ni, Cu, tac = [Me3NH]Cl3·2H2O]) is described. Due to their isomorphic and/ or isostructural character, bi-, tri-, and even tetra-heterometallic chains of the general formula {MxM´ytac}n, {MxM´yM´´ztac}n, {MxM´yM´´zM´´´ttac}n (MII = M ≠ M´≠ M´´≠ M´´´≠ M´´´´ and x, y, z, t is the percentage of each metal content) were synthesized and characterized. Limitating factors of the synthesis of these types of heterometallic coordination polymers are discussed. Furthermore, the conductive properties of selected representatives were investigated. Additionally, the products obtained from recrystallization of Nitac, two different novel 1D coordination polymers of the formula {[Me3NH]3{NiCl4}{NiCl3}}n and {[(Me3NH]{NiCl3}}n are described with respect to their structural and magnetic properties. Efforts to replace the [Me3NH]+ cations of Mtac compounds by [Et3NH]+ cations as well as by protonated aromatic amines as [2,2’-bipyH2]2+, [4,4’-bipyH2]2+ and [1,10-phenH2]2+ are reported next with respect to the structural exploration of obtained hybrid materials by the “wet chemistry” approach. Finally, the synthesis of a new family of perylene tetracarboxylate (ptc) based soluble complexes is reported. Structural, magnetic and luminescence properties of selected representatives of this new series of soluble ptc derivatives are reported.

La química bioinorgánica se ocupa de estudiar la función de los metales en los sistemas biológicos y de la síntesis de modelos para estudiar sistemas más complejos. Enmarcados en esta, se han estudiado los modos de interacción y los patrones de reconocimiento presentes en los complejos ternarios metal - base nitrogenada - derivado de aminoácido. En primer lugar, se han obtenido un serie de complejos binarios de 5-halouracilatos con cobre(II), zinc(II) y níquel(II) que presentan un reconocimiento por tándem de enlaces de hidrógeno entre uracilos. Con ácido orto-iodohipúrico se han preparado una serie de complejos binarios con cobalto(II), níquel(II), cobre(II), zinc(II) y plata(I). Con estos y aciclovir se ha conseguido la formación de los complejos ternarios donde los de cobalto, níquel y zinc son isoestructurales y, debido a la presencia de un apilamiento entre el aciclovir y un anillo aromático de o-iodohipúrico, se generan en la estructura los dos enantiómeros δ (delta minúscula) y λ (lambda minúscula) si consideramos los dos ligandos como un quelato gracias a la interacción por apilamiento. Con cobre(II), ácidos hipúricos y 1,10-fenantrolina o 2,2'-bipiridilo se han preparado una serie de complejos ternarios capaces de generar la especie de cobre(I) [Cu(phen)2]+ y que presentan actividad anticancerosa frente a células A549. En todos los complejos con ácidos hipúricos se ha observado que la presencia del anillo aromático perpendicular al plano amídico genera estructuras bidimensionales, mientras que con ligandos planares del mismo tipo las estructuras son tridimensionales. Finalmente se han preparado análogos de nucleótidos tipo N1-alquiluracilos y de dinucleótidos tipo N1,N1'-polimetilen-bis-uracilos. / Bioinorganic chemistry deals with the study of the role of metal ions in biologic systems and the synthesis of model compounds to study more complex systems. In line with it, we have studied the interactions modes and recognition patterns that are present in ternary complexes of the type: metal ion - nucleobase - amino acid derivative. First of all, we have obtained a series of binary compounds with 5-halouracils and copper(II), zinc(II) and nickel(II) with a recognition pattern formed by a tandem of hydrogen bonds between uracils. With orto-iodohippuric acid, we have prepared some binary complexes with cobalt(II), nickel(II), copper(II), zinc(II) and silver(I). With these binary derivatives and acyclovir we have been capable to obtain ternary complexes were, the cobalt, nickel and zinc ones are isostructural and, due to the presence of a stacking between the acyclovir and one aromatic ring of o-iodohippuric acid, they generate in the crystal structure the two enantiomers δ (lower case delta) and λ (lower case lambda) if we consider the two ligands as a chelate by means of the stacking interaction. In the case of copper, we have prepared a series of ternary derivatives with different hippuric acids and 1,10-phenanthroline and 2,2'-bipyridyl. These complexes are capable to generate the copper(I) species [Cu(phen)2]+ and they present anticancer activity against A549 cell line. An important fact in all the coordination compounds with hippuric acids is that the presence of the aromatic ring normal to the amide bond promotes the formation of bi-dimensional structures, whereas with planar ligands of the same kind we obtain tri-dimensional structures. Last but not least, we have prepared nucleotide (N1-alkiluracils) and dinucleotide (N1,N1'-polymethilen-bis-uracils) type ligands.