• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 4
  • 3
  • 2
  • 2
  • Tagged with
  • 13
  • 13
  • 6
  • 4
  • 3
  • 3
  • 3
  • 3
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • 2
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
1

A study of oxidation reaction kinetics during an air injection process.

Das, Shyamol Chandra January 2010 (has links)
Air injection is an enhanced oil recovery (EOR) process in which compressed air is injected into a high temperature, light-oil reservoir. The oxygen in injected air is intended to react with a fraction of reservoir oil at elevated temperature resulting in in-situ generation of flue gases and steam, which, in turn, mobilize and drive the oil ahead towards the producing wells. To understand and determine the feasibility of the air injection process application to a given reservoir, it is necessary to understand the oxidation behaviour of the crude oil. The aim of this study is to screen two Australian light-oil reservoirs; Kenmore Oilfield, Eromanga Basin, and another Australian onshore oil and gas field “B”* for air injection EOR process, and to understand the oxidation reaction kinetics during air injection. It is carried out by the thermogravimetric and differential scanning calorimetric (TGA/DSC) studies to investigate the oxidation mechanism during an air injection process. There has not been any TGA/DSC evaluation conducted to date with regard to air injection for Australian light-oil reservoirs. A series of thermal tests was performed to investigate the oxidation behaviour of two selected reservoirs in both air and oxygen environments. The first step undertaken in this study is thermogravimetric and calorimetric characterization of crude oils to (i) identify the temperature range over which the oil reacts with oxygen, (ii) examine the oxidation behaviour within the temperature identified, and (iii) evaluate the mass loss characteristics during the oxidation. This study also examines the effect of pressure on oxidation at different temperature ranges and the effect of core material (rock cutting) on oxidation reactions. Finally, kinetic data are calculated from thermal tests results by literature described method. Kenmore and Field B both are high temperature and light-oil reservoirs. Hydrocarbon distribution indicates that Kenmore oil contains 84 mole% of lower carbon number n-C₅ - n-C₁ ₃ compounds. Reservoir B oil also contains a substantial amount (i.e., 95 mole %) of lower carbon number n-C₄ - C₁ ₉ compounds. These lighter components may contribute favourably towards efficient oxidation. However, a high content of lighter ends in the oil may also result in a lower fuel load. Generally, low molecular weight oil gives fastest mass loss from heavy crude oil. Thermal tests on Kenmore oil showed two distinct exothermic reactivity regions in temperatures of 200-340°C and 360-450°C, with a 85-95% mass loss when the temperature reached 450°C. Reservoir B oil showed a wider exotherm range between approximately 180°C-260°C with 90-95% mass loss by temperature 350°C. In the high temperature range, the combustion reactions of Reservoir B oil are weaker than Kenmore oil. This is due to insufficient fuel available for oxidations in high temperature region. Reservoir B oil has more chance to auto ignite; but it has less sustainability to the ignition process. Based on the sustainability study of the ignition process, between the two reservoirs, Kenmore is the better candidate for air injection. Based on the thermal tests, it is concluded that for light-oil oxidation, vaporization is the dominant physical phenomenon. At low temperature range, the addition of the core material enhanced the exothermic reactions of the oil. The elevated pressure accelerated the bond scission reactions. The largest amount and highest rate of energy generation occurred at the low temperature range. Activation energies (E) are calculated from thermal test results and the value of ‘E’ in oil-with-core combined tests is smaller than the oil-only test. This indicates that the rock material has a positive impact on the combustion process. Moreover, the compositional analysis result addresses the composition of oils, which can help understand the oxidation behaviour of light-oils. * For confidentiality reasons, the field name is coded as Field B at the request of the operating company. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1381084 / Thesis (M.Eng.Sc.) -- University of Adelaide, Australian School of Petroleum, 2010
2

A study of oxidation reaction kinetics during an air injection process.

Das, Shyamol Chandra January 2010 (has links)
Air injection is an enhanced oil recovery (EOR) process in which compressed air is injected into a high temperature, light-oil reservoir. The oxygen in injected air is intended to react with a fraction of reservoir oil at elevated temperature resulting in in-situ generation of flue gases and steam, which, in turn, mobilize and drive the oil ahead towards the producing wells. To understand and determine the feasibility of the air injection process application to a given reservoir, it is necessary to understand the oxidation behaviour of the crude oil. The aim of this study is to screen two Australian light-oil reservoirs; Kenmore Oilfield, Eromanga Basin, and another Australian onshore oil and gas field “B”* for air injection EOR process, and to understand the oxidation reaction kinetics during air injection. It is carried out by the thermogravimetric and differential scanning calorimetric (TGA/DSC) studies to investigate the oxidation mechanism during an air injection process. There has not been any TGA/DSC evaluation conducted to date with regard to air injection for Australian light-oil reservoirs. A series of thermal tests was performed to investigate the oxidation behaviour of two selected reservoirs in both air and oxygen environments. The first step undertaken in this study is thermogravimetric and calorimetric characterization of crude oils to (i) identify the temperature range over which the oil reacts with oxygen, (ii) examine the oxidation behaviour within the temperature identified, and (iii) evaluate the mass loss characteristics during the oxidation. This study also examines the effect of pressure on oxidation at different temperature ranges and the effect of core material (rock cutting) on oxidation reactions. Finally, kinetic data are calculated from thermal tests results by literature described method. Kenmore and Field B both are high temperature and light-oil reservoirs. Hydrocarbon distribution indicates that Kenmore oil contains 84 mole% of lower carbon number n-C₅ - n-C₁ ₃ compounds. Reservoir B oil also contains a substantial amount (i.e., 95 mole %) of lower carbon number n-C₄ - C₁ ₉ compounds. These lighter components may contribute favourably towards efficient oxidation. However, a high content of lighter ends in the oil may also result in a lower fuel load. Generally, low molecular weight oil gives fastest mass loss from heavy crude oil. Thermal tests on Kenmore oil showed two distinct exothermic reactivity regions in temperatures of 200-340°C and 360-450°C, with a 85-95% mass loss when the temperature reached 450°C. Reservoir B oil showed a wider exotherm range between approximately 180°C-260°C with 90-95% mass loss by temperature 350°C. In the high temperature range, the combustion reactions of Reservoir B oil are weaker than Kenmore oil. This is due to insufficient fuel available for oxidations in high temperature region. Reservoir B oil has more chance to auto ignite; but it has less sustainability to the ignition process. Based on the sustainability study of the ignition process, between the two reservoirs, Kenmore is the better candidate for air injection. Based on the thermal tests, it is concluded that for light-oil oxidation, vaporization is the dominant physical phenomenon. At low temperature range, the addition of the core material enhanced the exothermic reactions of the oil. The elevated pressure accelerated the bond scission reactions. The largest amount and highest rate of energy generation occurred at the low temperature range. Activation energies (E) are calculated from thermal test results and the value of ‘E’ in oil-with-core combined tests is smaller than the oil-only test. This indicates that the rock material has a positive impact on the combustion process. Moreover, the compositional analysis result addresses the composition of oils, which can help understand the oxidation behaviour of light-oils. * For confidentiality reasons, the field name is coded as Field B at the request of the operating company. / http://proxy.library.adelaide.edu.au/login?url= http://library.adelaide.edu.au/cgi-bin/Pwebrecon.cgi?BBID=1381084 / Thesis (M.Eng.Sc.) -- University of Adelaide, Australian School of Petroleum, 2010
3

Development of a Concept for Forced Response Investigations

Holzinger, Felix 15 February 2010 (has links)
Striving to improve performance and lower weight of aircraft engines, modern compressor blades become thinner and lighter but higher loaded resulting in an increased vulnerability towards flutter. This trend is further aggravated through blisk designs that diminish structural damping and therewith flutter margin. Modern 3D wide-chord blade designs result in complex structural behaviors that add to the difficulty of correctly predicting flutter occurrence. To counteract above tendencies by driving the physical understanding of flutter and thereby helping to improve aero engine design tools, free flutter as well as forced response will be investigated in the 1.5 stage transonic compressor at TU Darmstadt. Aim of the forced response campaign is to determine the system damping in the stable compressor regime. Hence a novel excitation system capable of dynamically exciting specific rotor blade modes is needed. It is aim of the present work to find a promising concept for such a system. In the present work, the requirements for an excitation system to be used in the TUD compressor are defined with respect to achievable frequency, phase controllability, transferred excitation level, mechanical robustness, integrability and cleanliness. Different excitation system concepts, i.e. oscillating VIGVs, rotating airfoils, tangential and axial air injection are investigated numerically. An evaluation of the results obtained through 2D numerical studies proposes axial air injection as the most favorable concept. / Master of Science
4

Experimental and analytical study to model temperature profiles and stoichiometry in oxygen-enriched in-situ combustion

Rodriguez, Jose Ramon 30 September 2004 (has links)
A new combustion zone analytical model has been developed in which the combustion front temperature may be calculated. The model describes in the combustion zone, the amount of fuel burned based on reaction kinetics, the fuel concentration and produced gas composition based on combustion stoichiometry, and the amount of heat generated based on a heat balance. Six runs were performed in a 3-inch diameter, 40-inch long steel combustion tube with Jobo crude oil (9-11°API) from the Orinoco Belt in Venezuela. These runs were carried out with air containing three values of oxygen concentration, 21%, 30%, and 40%. The weight percentage of sand, clay, water, and oil in the sand mix was kept constant in all runs at 86.6%, 4.7%, 4.0%, and 4.7% respectively. Injection air rates (3 L/min) as well as the production pressure (300 psig) were kept constant in all runs. The results indicate that the calculated combustion zone temperatures and temperature profiles are in good agreement with the experimental data, for the range of oxygen concentration in the injected air. The use of oxygen-enriched air slightly increased the combustion front temperature from 440°C in a 21 mole % O2 concentration to a maximum of 475°C for air with 40 mole % O2 concentration. Oxygen-enriched air injection also increased the combustion front velocity from 13.4 cm/hr (for 21% oxygen) to 24.7 cm/hr (for 40% oxygen), thus reducing the start of oil production from 3.3 hours (for 21% oxygen) to 1.8 hours (for 40% oxygen). In the field, the use of oxygen-enriched air injection could translate into earlier oil production compared to with not-enriched air injection. The new analytical model for the combustion zone developed in this study will be beneficial to future researchers in understanding the effect of oxygen-enriched in-situ combustion and its implications on the combustion front temperature and combustion front thickness.
5

Expanding operation ranges using active flow control in Francis turbines / Lastområdesutvidgning med aktiv flödeskontroll i Francisturbiner

Adolfsson, Sebastian January 2014 (has links)
This report contains an investigation of fluid injection techniques used in the purpose of reducing deleterious flow effects occurring in the draft tube of Francis turbines when operating outside nominal load. There is a focus on implement ability at Jämtkrafts hydroelectric power plants and two power plants were investigated, located in series with each other named Lövhöjden and Ålviken. The only profitable scenario found with some degree of certainty was an increase in the operating range upwards to allow overload operation. Findings show that both air and water can be introduced in various locations to improve hydraulic efficiency around the turbine parts as well as reduce pressure pulsations in harmful operating regions. Investments in such systems have proven useful and profitable at several facilities with poorly adapted operating conditions. But due to losses in efficiency when operating injection systems, it turns out unprofitable in situations where it does not improve the operating range in a way that is resulting in increased annual or peak production.
6

Aérodynamique et contrôle de l'écoulement de jeu dans un ventilateur axial obtenu par rotomoulage. / Aerodynamic and tip clearance flow control of an axial fan obtained with rotational molding

Azzam, Tarik 18 February 2018 (has links)
Aujourd’hui, la fabrication des turbomachines est conditionnée par des normes de plus en plus restrictives. L'enjeu industriel pour les chercheurs est d'envisager des solutions optimales visant à réduire les sources de perte d'énergie, d'instabilité et du bruit, en particulier l'écoulement de jeu (débit de fuite). Des actions préliminaires ont été élaborées à Arts & Métiers ParisTech sur le rotomoulage du ventilateur axial de refroidissement d'automobile. L'idée de ce travail est d'utiliser la forme creuse induite par le rotomoulage afin de l'exploiter dans le controle de l'écoulement de jeu radial par soufflage rotatif. Pour cela, la virole comporte des trous d'injection orientés de façon à réduire simultanément le débit de fuite et le couple. Dans ce travail, trois parties ont été traité. La première concerne la réalisation du ventilateur par rotomoulage. La deuxième concerne l'étude expérimentale menée dans le banc d'essai ISO 5801. Cette étude comporte la réalisation d'un montage dédié au contrôle par soufflage rotatif, la métrologie menée pour la détermination des performances globales et la caractérisation de la vitesse axiale du sillage proche. La troisième partie traite la modélisation numérique des conditions expérimentales rentables ensuite l'extrapolation du travail vers des taux d'injection importants. Pour ce dernier, on arrive à annuler le débit de fuite avec un gain considérable du couple mettant ainsi le ventilateur en autorotation. / Nowadays, the manufacture of turbomachinery is conditioned by more and more restrictive rules. The industrial challenge for researchers has to consider optimal solutions to reduce sources of energy loss, instability and noise, particularly the tip clearance flow (leakage flow rate). Preliminary actions have been developed at Arts & ParisTech on rotational molding process used for the automobile cooling axial fan. The idea of this work is to use the hollow shape induced by rotational molding process in order to exploit it in the control of tip clearance flow through rotary steady air injection. For this, the shroud ring is composed of injection holes oriented in such away to reduce both of leakage flow rate and the torque. In this work, the thesis focuses on three parts. The first concerns the build of the fan by rotational molding process. The second concerns the experimental study carried out in the ISO 5801 test bench. This study involves the realization of drive system dedicated to rotary steady air injection, metrology for performance determination and the characterization of the near wake axial velocity. The third part deals with the numerical modeling of efficient experimental conditions, then the extrapolation of work towards high injection rates. For this latter, it is possible to cancel leakage flow rate with a considerable gain of the torque thus putting the fan in autorotation.
7

Experimental Study of In Situ Combustion with Decalin and Metallic Catalyst

Mateshov, Dauren 2010 December 1900 (has links)
Using a hydrogen donor and a catalyst for upgrading and increasing oil recovery during in situ combustion is a known and proven technique. Based on research conducted on this process, it is clear that widespread practice in industry is the usage of tetralin as a hydrogen donor. The objective of the study is to find a cheaper hydrogen donor with better or the same upgrading performance. Decalin (C10H18) is used in this research as a hydrogen donor. The experiments have been carried out using field oil and water saturations, field porosity and crushed core for porous medium. Four in situ combustion runs were performed with Gulf of Mexico heavy oil, and three of them were successful. The first run was a control run without any additives to create a base for comparison. The next two runs were made with premixed decalin (5 percent by oil weight) and organometallic catalyst (750 ppm). The following conditions were kept constant during all experimental runs: air injection rate at 3.1 L/min and combustion tube outlet pressure at 300 psig. Analysis of the performance of decalin as a hydrogen donor in in-situ combustion included comparison of results with an experiment where tetralin was used. Data from experiments of Palmer (Palmer-Ikuku, 2009) was used for this purpose, where the same oil, catalyst and conditions were used. Results of experiments using decalin showed better quality of produced oil, higher recovery factor, faster combustion front movement and higher temperatures of oxidation. API gravity of oil in a run with decalin is higher by 4 points compared to a base run and increased 5 points compared to original oil. Oil production increased by 7 percent of OOIP in comparison with base run and was 2 percent higher than the experiment with tetralin. The time required for the combustion front to reach bottom flange decreased 1.6 times compared to the base run. The experiments showed that decalin and organometallic catalysts perform successfully in in situ combustion, and decalin is a worthy replacement for tetralin.
8

Modélisation de la combustion et des polluants dans la ligne d'échappement d'un moteur / Modelling of the combustion and the polluants in the exhaust line of an IC-engine

Anderlohr, Jörg-Michel 16 December 2009 (has links)
L'objectif de ce travail de thèse est le développement d'un modèle numérique prédictif pour la simulation des phénomènes de postoxydation dans la ligne d’échappement d’un moteur à combustion interne. Le modèle a été écrit pour reproduire le processus d'auto inflammation des hydrocarbures durant la postoxydation, mais également l'évolution des polluants et des produits de combustion en général. Ceci a nécessité de mettre au point un schéma cinétique détaillé qui tienne compte de la chimie à basse température des hydrocarbures et de l'influence sur cette chimie des différentes espèces majeures présentes dans les gaz brûlés à postoxyder. Ces espèces sont le CO2, le H2O et le N2, qui agissent comme diluants, mais également des polluants tels que le CO ou les NOx. Ces derniers, même en faibles concentrations, peuvent avoir un effet important sur l’oxydation des hydrocarbures qui doit aussi être prise en compte dans le modèle chimique.Afin de considérer, en plus de la chimie, et les phénomènes physiques de la postoxydation, tels que la turbulence et les effets de mélange, ce schéma cinétique a été couplé à un modèle de combustion turbulente adapté à l'utilisation dans un code CFD 3D moteur. Ce couplage a été effectué via une tabulation a priori de la chimie, méthode qui permet de réduire considérablement le temps de calcul, tout en décrivant l'ensemble des phénomènes liés à la chimie détaillée. Une technique de tabulation de la cinétique chimique a donc été développée et implantée dans un code CFD. Une configuration permettant de représenter les phénomènes caractéristiques de la postoxydation dans la ligne d'échappement d'un moteur à combustion interne a été simulée. Les résultats permettent de mieux appréhender ces phénomènes et de proposer des solutions technologiques visant à leur optimisation / The aim of this PhD thesis is the development of a predictive numerical model capable of simulating hydrocarbon postoxidation in an IC engine exhaust line. The model should reproduce the auto-ignition of hydrocarbons, as well as the evolution of pollutants and combustion products under postoxidation conditions. For this purpose, a detailed kinetic reaction model was developed. It should be valid at low temperatures and under highly diluted conditions. The model should also take into account the effects of the major components of engine exhaust gas on hydrocarbon postoxidation. These are CO2, H2O, and N2, acting as diluting species, but also CO and NOx, which even in small amounts, may strongly impact hydrocarbon oxidation kinetics. These species must hence be considered for postoxidation modelling.In order to gather chemical and physical effects such as turbulence and mixing, the chemical kinetic mechanism was coupled with a turbulent combustion model designed for CFD 3D engine computations. An a priori tabulation methodology was developed, minimizing computational effort and the developed tabulation technique was validated under postoxidation conditions in an IC-engine exhaust line. The coupled chemical kinetics tabulation and turbulent mixing model was implemented in the CFD code IFP-C3D. Simulations were performed on a configuration representative of the physical phenomena characteristic of hydrocarbon postoxidation in exhaust lines. Results improved the understanding of postoxidation phenomena in an IC-engine exhaust line and propose technical solutions for an enhanced postoxidation control
9

Demonstration Of Supersonic Combustion In A Combustion Driven Shock-Tunnel

Joarder, Ratan 06 1900 (has links)
For flights beyond Mach 6 ramjets are inefficient engines due to huge total pressure loss in the normal shock systems, combustion conditions that lose a large fraction of the available chemical energy due to dissociation and high structural loads. However if the flow remains supersonic inside the combustion chamber, the above problems could be alleviated and here the concept of SCRAMJET(supersonic combustion ramjet) comes into existence. The scramjets could reduce launching cost of satellites by carrying only fuel and ingesting oxygen from atmospheric air. Further applications could involve defense and transcontinental hypersonic transport. In the current study an effort is made to achieve supersonic combustion in a ground based short duration test facility(combustion driven shock-tunnel), which in addition to flight Mach number can simulate flight Reynolds number as well. In this study a simple method of injection i.e. wall injection of the fuel into the combustion chamber is used. The work starts with threedimensional numerical simulation of a non-reacting gas(air) injection into a hypersonic cross-flow of air to determine the conditions in which air penetrates reasonably well into the cross-flow. Care is taken so that the process does not induce huge pressure loss due to the bow shock which appears in front of the jet column. The code is developed in-house and parallelized using OpenMp model. This is followed by experiments on air injection into a hypersonic cross-flow of air in a conventional shock-tunnel HST2 existing in IISc. The most tricky part is synchronization of injection with start of test-flow in such a short duration(test time 1 millisecond) facility. Next part focuses on numerical simulations to determine the free-stream conditions, mainly the temperature and pressure of air, so that combustion takes place when hydrogen is injected into a supersonic cross-flow of air. The simulations are two-dimensional and includes species conservation equations and source terms due to chemical reactions in addition to the Navier-Stokes equations. This code is also built in-house and parallelized because of more number of operations with the inclusion of species conservation equations and chemical non-equilibrium. However, the predicted conditions were not achievable by HST2 due to low stagnation conditions of HST2. Therefore, a new shock-tunnel which could produce the required conditions is built. The new tunnel is a combustion driven shock-tunnel in which the driver gas is at higher temperature than conventional shock-tunnel. The driver gas is basically a mixture of hydrogen, oxygen and helium at a mole ratio of 2:1:10 initially. The mixture is ignited by spark plugs and the hydrogen and oxygen reacts releasing heat. The heat released raises the temperature of the mixture which is now predominantly helium and small fractions of water vapour and some radicals. The composition of the driver gas and initial pressure are determined through numerical simulations. Experiments follow in the new tunnel on hydrogen injection into a region of supersonic cross-flow between two parallel plates with a wedge attached to the bottom plate. The wedge reduces the hypersonic free-stream to Mach 2. A high-speed camera monitors the flow domain around injection point and sharp rise in luminosity is observed. To ascertain whether the luminosity is due to combustion or not, two more driven gases namely nitrogen and oxygen-rich air are used and the luminosity is compared. In the first case, the free-stream contains no oxygen and luminosity is not observed whereas in the second case higher luminosity than air driver case is visible. Additionally heat-transfer rates are measured at the downstream end of the model and at a height midway between the plates. Similar trend is observed in the relative heat-transfer rates. Wall static pressure at a location downstream of injection port is also measured and compared with numerical simulations. Results of numerical simulations which are carried out at the same conditions as of experiments confirm combustion at supersonic speed. Experiments and numerical simulations show presence of supersonic combustion in the setup. However, further study is necessary to optimize the parameters so that thrust force could be generated efficiently.
10

Soap separation efficiency at Gruvön mill : An evaluation of the process before and after a modification

Tran, Tony January 2011 (has links)
Wood consists not only of cellulose, lignin and hemicellulose but also of so called extractives which includes fats and acids and these components are separated in the mill from the black liquor. These extractives are in the mill denoted as tall oil soap. Tall oil has a large field of applications like chemicals and fuel and as it is produced to the atmosphere if it can replace oil and thus reduce the oil consumption. Tall oil soap is separated from the black liquor in a skimmer and the focus of this thesis was to examine the effect of air injection and the soap layer thickness on the soap separation efficiency in a skimmer. The work was focused on in analyzing the soap content of the inlet and outlet black liquor flow of the skimmer and to detect if an enhancement has been achieved with the two mentioned methods. The reason for the pulp mill to improve the soap separation efficiency was to decrease the risk of foaming and fouling in the evaporator but also to be able to increase the production of tall oil. The air injection gave a 41% improvement of the soap separation efficiency and further improvements are probably possible to achieve. The air injection flow was about 7 l air /m3 liquor in the black liquor feed. The airflow lowers the density of soap, creating a greater difference in density between soap and black liquor and this improves the separation efficiency. A thicker soap layer could increase the likelihood for soap drops to raise and reach the soap-liquor interface, because the soap drops have the tendency to bind with each other and will be separated from the liquor instead of following with the skimmed liquor outlet (fig. i.2). However, this study shows no indication of improvement with thicknesses that exceeds 0,75- 3,5 m which also endanger the skimmer due to overflow from the skimmer or create a short circuit between the in- and the outlet black liquor flow.

Page generated in 0.4967 seconds