Spelling suggestions: "subject:"allow solidification""
1 |
The structure and properties of spray-cast depositsKim, Myung-Ho January 1982 (has links)
No description available.
|
2 |
Microstructure and properties of rapidly solidified aluminium containing Cr, Zr and MnAdkins, Nicholas J. E. January 1989 (has links)
The development of aluminium alloys that can be processed by Rapid Solidification (RS) techniques for use in high temperature applications has recently been an area of intense study. One of the alloy systems of interest is Al-Cr-Zr-Mn. This work comprises a study of the microstructure and tensile properties of alloys of this system processed by melt spinning, high pressure gas atomisation (HPGA) and chill casting. The RS microstructures of Al-Cr and Al-Zr binary alloys were also compared with those of the quaternary alloys. The variety of microstructures observed in the powders of the quaternary alloys was consistent with the different cooling rates and nucleation temperatures experienced by droplets of different sizes, A cubic phase not previously reported was observed in the finer powder. The transition from a partitionless to a cellular microstructure occurred at estimated solidification front velocities similar to those predicted by morphological stability theory. The distribution of discrete Al[13]Cr[2] intermetallic particles within Al-Cr gas atomised powders of different sizes was found to be consistent with a probabilistic model of nucleants distributed in the volume of the alloy melt. Based on these results the original Al-5.2Cr-1.4Zr-1.3Mn (wt%) alloy was diluted to give an Al-3.3Cr-0.7Zr-0.7Mn (wt%) alloy so that the bulk of the powder (the sub-45mum size fraction) did not contain coarse intermetallic particles but exhibited a mainly cellular microstructure. A relationship has been determined between the thickness of wedge shaped chill castings and powder diameters for. similar microstructures. Prediction of alloy compositions designed to give a particular microstructure in a specified powder size can therefore be tested by a simple casting technique. The mechanical properties of the original and optimised quaternary alloy powders consolidated by Conform and extrusion have been determined and related to the as-consolidated and aged microstructures. The extruded powders of both alloys exhibited better properties than the Conformed powder. A large contribution to the strength of the extruded materials is made by their stabilised fine grain size. The optimised alloy had a consistently better ductility. Neither of the alloys retained its strength after prolonged treatment at 400°C, but the results suggest that a service temperature of 300°C may be possible.
|
3 |
Studies On Momentum, Heat And Mass Transfer In Binary Alloy Solidification ProcessesChakraborty, Suman 09 1900 (has links)
The primary focus of the present work is the development of macro-models for numerical simulation of binary alloy solidification processes, consistent with microscopic phase-change considerations, with a particular emphasis on capturing the effects of non-equilibrium species redistribution on overall macrosegregation behaviour. As a first step, a generalised macroscopic framework is developed for mathematical modelling of the process. The complete set of equivalent single-phase governing equations (mass, momentum, energy and species conservation) are solved following a pressure-based Finite Volume Method according to the SIMPLER algorithm. An algorithm is also developed for the prescription of the coupling between temperature and the melt-fraction.
Based on the above unified approach of solidification modelling, a macroscopic numerical model is devised that is capable of capturing the interaction between the double-diffusive convective field and a localised fluid flow on account of solutal undercooling during non-equilibrium solidification of binary alloys. Numerical simulations are performed for the case of two-dimensional transient solidification of Pb-Sn alloys, and the simulation results are also compared with the corresponding experimental results quoted in the literature. It is observed that non-equilibrium effects on account of solutal undercooling result in an enhanced macrosegregation. Next, the model is extended to capture the effects of dendritic arm coarsening on the macroscopic transport phenomena occurring during a binary alloy solidification process. The numerical results are first tested against experimental results quoted in the literature, corresponding to the solidification of an Al-Cu alloy in a bottom-cooled cavity. It is concluded that dendritic arm coarsening leads to an increased effective permeability of the mushy region as well as an enhanced eutectic fraction of the solidified ingot. Consequently, an enhanced macrosegregation can be predicted as compared to that dictated by shrinkage-induced fluid flow alone.
For an order-of-magnitude assessment of predictions from the numerical models, a systematic approach is subsequently developed for scaling analysis of momentum, heat and species conservation equations pertaining to the case of solidification of a binary mixture. A characteristic velocity scale inside the mushy region is derived, in terms of the morphological parameters of the two-phase region. A subsequent analysis of the energy equation results in an estimation of the solid layer thickness. It is also shown from scaling principles that non-equilibrium effects result in an enhanced macro-segregation compared to the case of an equilibrium model For the sake of assessment of the scaling analysis, the predictions are validated against computational results corresponding to the simulation of a full set of governing equations, thus confirming the trends suggested by the scale analysis.
In order to analytically investigate certain limiting cases of unidirectional alloy solidification, a fully analytical solution technique is established for the solution of unidirectional, conduction-dominated, alloy solidification problems. The results are tested for the problem of solidification of an ammonium chloride-water solution, and are compared with those from existing analytical models as well as with the corresponding results from a fully numerical simulation. The effects of different microscopic models on solidification behaviour are illustrated, and transients in temperature and heat flux distribution are also analysed. An excellent agreement between the present solutions and results from the computational simulation can be observed.
The generalised numerical model is subsequently utilised to investigate the effects of laminar double-diffusive Rayleigh-Benard convection on directional solidification of binary fluids, when cooled and solidified from the top. A series of experiments is also performed with ammonium chloride-water solutions of hypoeutectic and hypereutectic composition, so as to facilitate comparisons with numerical predictions. While excellent agreements can be obtained for the first case, the second case results in a peculiar situation, where crystals nucleated on the inner roof of the cavity start descending through the bulk fluid, and finally settle down at the bottom of the cavity in the form of a sedimented solid layer. An eutectic solidification front subsequently progresses from the top surface vertically downwards, and eventually meets the heap of solid crystals collected on the floor of the cavity. However, comparison of experimental observations with corresponding numerical results from the present model is not possible under this situation, since the associated transport process involves a complex combination of a number of closely interconnected physical mechanisms, many of which are yet to be resolved.
Subsequent to the development of the mathematical model and experimental arrangements for macroscopic transport processes during an alloy solidification process, some of the important modes of double-diffusive instability are analytically investigated, as a binary alloy of any specified initial composition is directionally solidified from the top. By employing a close-formed solution technique, the critical liquid layer heights corresponding to the onset of direct mode of instability are identified, corresponding two a binary alloy with three different initial compositions.
In order to simulate turbulent transport during non-equilibrium solidification processes of binary alloys, a modified k-8 model is subsequently developed. Particular emphasis is given for appropriate modelling of turbulence parameters, so that the model merges with single-phase turbulence closure equations in the pure liquid region in a smooth manner. Laboratory experiments are performed using an ammonium chloride-water solution that is solidified by cooling from the top of a rectangular cavity. A good agreement between numerical and experimental results is observed.
Finally, in order to study the effects of three-dimensionality in fluid flow on overall macrosegregation behaviour, the interaction between double-diffusive convection and non-equilibrium solidification of a binary mixture in a cubic enclosure (cooled from a side) is numerically investigated using a three-dimensional transient mathematical model. Investigations are carried out for two separate model systems, one corresponding to a typical metal-ally analogue system and other corresponding to an actual metal-alloy system. As a result of three-dimensional convective flow-patterns, a significant solute macrosegregation is observed in the transverse sections of the cavity, which cannot be captured by two-dimensional simulations.
|
4 |
Modeling of shrinkage porosity defect formation during alloy solidificationKhalajzadeh, Vahid 01 May 2018 (has links)
Among all casting defects, shrinkage porosities could significantly reduce the strength of metal parts. As several critical components in aerospace and automotive industries are manufactured through casting processes, ensuring these parts are free of defects and are structurally sound is an important issue. This study investigates the formation of shrinkage-related defects in alloy solidification. To have a better understanding about the defect formation mechanisms, three sets of experimental studies were performed. In the first experiment, a real-time video radiography technique is used for the observation of pore nucleation and growth in a wedge-shaped A356 aluminum casting. An image-processing technique is developed to quantify the amount of through-thickness porosity observed in the real-time radiographic video. Experimental results reveal that the formation of shrinkage porosity in castings has two stages: 1-surface sink formation and 2- internal porosity evolution. The transition from surface sink to internal porosity is defined by a critical coherency limit of . In the second and third experimental sets, two Manganese-Steel (Mn-Steel) castings with different geometries are selected. Several thermocouples are placed at different locations in the sand molds and castings to capture the cooling of different parts during solidification. At the end of solidification, castings are sectioned to observe the porosity distributions on the cut surfaces. To develop alloys’ thermo-physical properties, MAGMAsoft (a casting simulation software package) is used for the thermal simulations. To assure that the thermal simulations are accurate, the properties are adjusted to get a good agreement between simulated and measured temperatures by thermocouples.
Based on the knowledge obtained from the experimental observations, a mathematical model is developed for the prediction of shrinkage porosity in castings. The model, called “advanced feeding model”, includes 3D multi-phase continuity, momentum and pore growth rate equations which inputs the material properties and transient temperature fields, and outputs the feeding velocity, liquid pressure and porosity distributions in castings. To solve the model equations, a computational code with a finite-volume approach is developed for the flow calculations. To validate the model, predicted results are compared with the experimental data. The comparison results show that the advanced feeding model can accurately predict the occurrence of shrinkage porosity defects in metal castings. Finally, the model is optimized by performing several parametric studies on the model variables.
|
5 |
Efeito do processo de solidificação, deformação plástica e recristalização sobre o comportamento eletroquímico da liga Al-4,5% p.Cu em soluções aquosas / Effect of the solidification, plastic deformation and recrystallizaton on the electrochemical behavior of Al-4.5 % wt. Cu alloy in aqueous mediumLourenço, Julio Cesar 25 November 2016 (has links)
A liga binária Al-Cu é a base para todas as ligas da série 2xxx que são de grande importância em diversas aplicações como na indústria aeronáutica, transporte, máquinas e equipamentos. No entanto, pouco se conhece sobre os efeitos do tipo de solidificação desta liga e da deformação plástica sobre sua resistência à corrosão em meio aquoso. O escopo deste trabalho foi procurar correlacionar microestruturas da liga Al-4,5%p.Cu solidificada de maneira convencional e unidirecional vertical ascendente (brutas de fusão, deformadas plasticamente por forjamento rotativo a frio, e tratadas termicamente visando recristalização), orientações preferenciais de grãos com as características de resistência à corrosão. Foram utilizadas técnicas de microscopia eletrônica de varredura e óptica, difratometria de raios X e ensaios eletroquímicos em soluções de NaCl 0,6 M e Na2SO4 0,1M por polarização potenciodinâmica e espectroscopia de impedância eletroquímica. A taxa de corrosão foi maior em solução de NaCl 0,6 M do que em Na2SO4 0,1M para todas as amostras. O aumento da redução por deformação plástica conduziu a uma diminuição da resistência à corrosão da liga devido ao aumento das tensões internas e ao aparecimento de orientações preferenciais dos grãos de menor densidade planar como (200) e (220). As amostras recristalizadas apresentaram de uma forma geral uma resistência maior quando comparada às amostras não recristalizadas, comportamento atribuído ao alívio de tensões internas e ao desaparecimento da orientação preferencial do plano menos denso (220). / The binary Al-Cu alloy is the basis for all AA2xxx alloys, being important in several applications as aeronautical industry, transportation, machines and equipments. However, few is known about the effect of the type of solidification of this alloy and plastic deformation on the corrosion resistance in aqueous medium. The scope of this work was to correlate microstructures of the Al-4.5 % wt. Cu alloy solidified under conventional and upward direct chilling conditions (as cast condition, plastic formed by cold swaging, and heat treated seeking recristallyzation), crystallographic orientations and corrosion resistance characteristics. Scanning electron microscopy and optical, X ray diffractometry techniques and electrochemical measurements in NaCl 0,6 M and Na2SO4 0,1 M potentiodynamic polarization and electrochemical impedance spectroscopy were used. The corrosion rate in NaCl 0,6 M was higher than in Na2SO4 0,1 M for all samples. The increase of the plastic deformation led to alloy corrosion resistance decrease, due to the internal stresses increase and the arising of less dense grain preferred orientations of lower planar density as (200) and (220) orientations. The recristallyzed samples presented in a general way a higher corrosion resistance, when compared to the non recristallyzed samples, being imputed to the internal tension relieve and the extinction of the plane (220) of lower planar density to a structure of random orientation.
|
6 |
Efeito do processo de solidificação, deformação plástica e recristalização sobre o comportamento eletroquímico da liga Al-4,5% p.Cu em soluções aquosas / Effect of the solidification, plastic deformation and recrystallizaton on the electrochemical behavior of Al-4.5 % wt. Cu alloy in aqueous mediumJulio Cesar Lourenço 25 November 2016 (has links)
A liga binária Al-Cu é a base para todas as ligas da série 2xxx que são de grande importância em diversas aplicações como na indústria aeronáutica, transporte, máquinas e equipamentos. No entanto, pouco se conhece sobre os efeitos do tipo de solidificação desta liga e da deformação plástica sobre sua resistência à corrosão em meio aquoso. O escopo deste trabalho foi procurar correlacionar microestruturas da liga Al-4,5%p.Cu solidificada de maneira convencional e unidirecional vertical ascendente (brutas de fusão, deformadas plasticamente por forjamento rotativo a frio, e tratadas termicamente visando recristalização), orientações preferenciais de grãos com as características de resistência à corrosão. Foram utilizadas técnicas de microscopia eletrônica de varredura e óptica, difratometria de raios X e ensaios eletroquímicos em soluções de NaCl 0,6 M e Na2SO4 0,1M por polarização potenciodinâmica e espectroscopia de impedância eletroquímica. A taxa de corrosão foi maior em solução de NaCl 0,6 M do que em Na2SO4 0,1M para todas as amostras. O aumento da redução por deformação plástica conduziu a uma diminuição da resistência à corrosão da liga devido ao aumento das tensões internas e ao aparecimento de orientações preferenciais dos grãos de menor densidade planar como (200) e (220). As amostras recristalizadas apresentaram de uma forma geral uma resistência maior quando comparada às amostras não recristalizadas, comportamento atribuído ao alívio de tensões internas e ao desaparecimento da orientação preferencial do plano menos denso (220). / The binary Al-Cu alloy is the basis for all AA2xxx alloys, being important in several applications as aeronautical industry, transportation, machines and equipments. However, few is known about the effect of the type of solidification of this alloy and plastic deformation on the corrosion resistance in aqueous medium. The scope of this work was to correlate microstructures of the Al-4.5 % wt. Cu alloy solidified under conventional and upward direct chilling conditions (as cast condition, plastic formed by cold swaging, and heat treated seeking recristallyzation), crystallographic orientations and corrosion resistance characteristics. Scanning electron microscopy and optical, X ray diffractometry techniques and electrochemical measurements in NaCl 0,6 M and Na2SO4 0,1 M potentiodynamic polarization and electrochemical impedance spectroscopy were used. The corrosion rate in NaCl 0,6 M was higher than in Na2SO4 0,1 M for all samples. The increase of the plastic deformation led to alloy corrosion resistance decrease, due to the internal stresses increase and the arising of less dense grain preferred orientations of lower planar density as (200) and (220) orientations. The recristallyzed samples presented in a general way a higher corrosion resistance, when compared to the non recristallyzed samples, being imputed to the internal tension relieve and the extinction of the plane (220) of lower planar density to a structure of random orientation.
|
7 |
Effect Of Mould Filling On Evolution Of Mushy Zone And Macrosegregation During SolidificationPathak, Nitin 02 1900 (has links)
The primary focus of the present work is to model the entire casting process from filling stage to complete solidification. The model takes into consideration any phase change taking place during the filling process. An implicit volume of fluid (VOF) based algorithm has been employed for simulating free surface flows during the filling process and the model for solidification is based on a fixed-grid enthalpy-based control volume approach. Solidification modelling is coupled with VOF through User Defined Functions (UDF) developed in commercial fluid dynamics (CFD) code FLUENT
6.3.26. The developed model is applied for the simultaneous filling and solidification of pure metals and binary alloy systems to study the effects of filling process on the solidification characteristics, evolution of mushy zone and the final macrosegregation pattern in the casting. The numerical results of the present analysis are compared with the conventional analysis assuming the initial conditions to be a completely filled mould cavity with uniform temperature, solute concentration and quiescent melt inside the cavity. The effects of process parameters, namely the degree of superheat, cooling temperature and filling velocity etc. are also investigated. Results show significant differences on the evolution of mushy zone and macrosegregation between the present analysis and the conventional analysis. The application of present model to simulate three dimensional sand casting is also demonstrated. The three dimensional competetive effect of filling generated residual flow and the buoyancy-induced convective flow pattern cause significant difference in macrosegregation pattern in casting.
|
8 |
Single-Phase And Multi-Phase Convection During Solidification Of Non-eutectic Binary SolutionsChakraborty, Prodyut Ranjan 02 1900 (has links) (PDF)
During solidification of non-eutectic alloys, non-isothermal phase change causes dendritic growth of solid front with liquid phase entrapped within the dendritic network producing the mushy region. Solidification causes rejection of solute at the solid-liquid interface and within the mushy zone, causing a sharp concentration gradient to build up across the mushy region. At the same time, a temperature gradient is present as a result of externally imposed boundary conditions as well as due to evolution of latent heat, giving rise to the so-called “double-diffusive” or thermo-solutal convection. Depending on the relative density of the solute being rejected in the liquid phase during solidification process, thermal and solutal buoyancy can either aid or oppose each other. Rejection of a heavier solute leads to aiding thermo-solutal convection situation whereas the rejection of lighter solute causes the thermal and solutal buoyancy to oppose each other. If the thermal and solutal buoyancies oppose each other, flow instability arises adjacent to the mush-bulk liquid interface regions. Thus, there may be a wide variety of convection situations present in the solidifying domain for different combinations of solution concentrations and externally imposed boundary conditions.
The situation becomes even more complex if the solid phase movement along with the bulk flow is involved in the process, leading to multiphase convection. Detachment of solid phase from the solid/liquid interface can be caused by remelting (solutal and/or thermal) and shearing action of a convecting liquid adjacent to the interface. Depending on the drag of the bulk flow and the density of the solid phase relative to that of the bulk liquid, these detached particles can either float or sediment.
The redistribution of the rejected solute by means of diffusion (at a local scale) and thermo-solutal convection (at system level length scales) causes heterogeneous orientation of mixture constituents over the solidifying domain popularly known as macro-segregation. From the point of view of manufacturing, severe form of macro-segregation or heterogeneous species distribution is an undesirable phenomenon and hence, a thorough understanding of the species redistribution by means of diffusion and convection during solidification process is very important. Most of the earlier studies on double diffusive convection during solidification involved fixed dendrites. However, the advection of solid particles during the solidification process can generate major instability in the flow pattern while modifying the solid front growth, and hence the macro-segregation pattern considerably.
With this viewpoint in mind, the overall objective of the present work is to address these wide-varieties of single phase and multi phase flow situations and their effect on solid front growth and macro-segregation during directional solidification of non-eutectic binary alloys, numerically as well as experimentally. Different configurations of directional solidification processes involving double diffusive convection have been studied for two different kinds of non-eutectic solutions. While solidification of hypoeutectic solutions leads to aiding type double diffusive convection, the solidification of hyper-eutectic solutions is characterized by opposing type double diffusive convection. Solidification of hypo-eutectic solution generally involves single phase flow, while most of the hyper-eutectic solidification involves movement of solid phase (i.e. multiphase flow). As far as the modeling part is concerned, transport phenomena during solidification with multiphase convection are not common in existing literature. This work is a first attempt to develop a solidification model with multiphase flow based entirely on macroscopic parameters. As a first step, a generalized macroscopic framework has been developed for mathematical modeling of multiphase flow during solidification of binary alloy systems. The complete set of equivalent single-domain governing equations (mass, momentum, energy and species conservation) are coupled with the phase (solid and liquid) velocities. A generalized algorithm has been developed to determine solid detachment and solid advection phenomena, based on two critical parameters, namely: critical solid fraction and critical velocity. While the first of these two parameters (critical solid fraction) represents the strength of the dendritic bond, the second (critical velocity) stands for the intensity of flow to create drag force and solutal remelting at the dendrite roots. A new approach for evaluating liquid/solid fraction by using fixed grid enthalpy updating scheme, that accounts for multiphase flow and, at the same time, handles equilibrium and non equilibrium solidification mechanisms, has been proposed. The newly developed model has been validated with existing literatures as well as with experimental observations performed in the present work.
The experimental results were obtained by using PIV as well as laser scattering techniques. Side cooled as well as top cooled configurations are studied. Single phase convection is observed for the case of hypo-eutectic solution, whereas hyper-eutectic solutions involve convection with movement of solid phase. For the case of bottom cooled hyper-eutectic solution, finger-like convection leading to freckle formation is observed. For all the hyper-eutectic cases, solid phase movement is found to alter the convection pattern and final macrosegregation significantly. The numerical results are compared with experimental observations both qualitatively as well as quantitatively.
|
9 |
Considerations in Designing Alloys for Laser-Powder Bed Fusion Additive ManufacturingThapliyal, Saket 05 1900 (has links)
This work identifies alloy terminal freezing range, columnar growth, grain coarsening, liquid availability towards the terminal stage of solidification, and segregation towards boundaries as primary factors affecting the hot-cracking susceptibility of fusion-based additive manufacturing (F-BAM) processed alloys. Additionally, an integrated computational materials engineering (ICME)-based approach has been formulated to design novel Al alloys, and high entropy alloys for F-BAM processing. The ICME-based approach has led to heterogeneous nucleation-induced grain refinement, terminal eutectic solidification-enabled liquid availability, and segregation-induced coalescence of solidification boundaries during laser-powder bed fusion (L-PBF) processing. In addition to exhibiting a wide crack-free L-PBF processing window, the designed alloys exhibited microstructural heterogeneity and hierarchy (MHH), and thus could leverage the unique process dynamics of L-PBF to produce a fine-tunable MHH and mechanical behavior. Furthermore, alloy chemistry-based fine tuning of the stacking fault energy has led to transformative damage tolerant alloys. Such alloys can shield defects stemming from the stochastic powder bed in L-PBF, and consequently can prevent catastrophic failure despite the solidification defects. A modified materials systems approach that explicitly includes alloy chemistry as a means to modify the printability, properties and performance with F-BAM is also presented. Overall, this work is expected to facilitate application specific manufacture with F-BAM and eventually facilitate widespread adoption of F-BAM in structural application.
|
10 |
Grain motion and packing : application to metallic alloy solidification / Étude du mouvement des grains et de leur empilement : application à la solidification d'alliages métalliquesOlmedilla González de Mendoza, Antonio 11 December 2017 (has links)
La modélisation multi-échelle multi-physique de la solidification d'alliages métalliques demande de combiner des phénomènes à l'échelle macroscopique du produit et microscopiques à l'échelle des structures de solidification. Dans cette thèse, l'empilement aléatoire des grains équiaxes avec des morphologies typiques de solidification est étudié. Nous mettons tout d'abord en évidence les paramètres hydrodynamiques adimensionnels qui régissent l'empilement de grains équiaxes : le nombre de Stokes, St, le nombre d'Archimède, Ar, et le rapport entre le temps caractéristique de la croissance et le temps caractéristique du mouvement, Γ. Un dispositif expérimental a été conçu par similitude hydrodynamique avec le phénomène réel de l'empilement de la solidification afin d'étudier l'influence de la géométrie des grains équiaxes et l'influence des conditions hydrodynamiques sur la fraction d'empilement. En outre, un outil numérique basé sur le méthode des éléments discrets a été développé pour compléter le travail expérimental de détermination de : la fraction d'empilement locale, le nombre de particules voisines en contact et l'orientation des particules. Des fractions d'empilement entre environ 0,53 et 0,67 ont été mesurées et calculées pour les grains sphériques non-cohésifs, alors que des valeurs allant jusqu'à environ 0,30 sont trouvées pour les grains dendritiques non-cohésifs. Enfin, nous étudions la dynamique de l'empilement, qui est la transition d'un régime de sédimentation à l'équilibre mécanique. L'évolution des variables comme la fraction locale de solide, le nombre de particules voisines en contact et l'orientation du grain en fonction du temps est présentée / Solidification multiphase multiscale modeling of metal alloys is based on the combination of the phenomena at the macroscopic scale of the product and at the microscopic scale of the solidification structures. In this thesis, the random packing of the typical equiaxed grain morphologies in metal alloy solidification is investigated. Firstly, we highlight the hydrodynamic dimensionless parameters governing the grain packing in the melt: the Stokes number, St, the Archimedes number, Ar, and the growth-to-motion ratio, Γ. Subsequently, an experimental setup is designed by hydrodynamic similarity with the actual solidification packing phenomenon in order to investigate the influence of the equiaxed grain geometry and the hydrodynamic conditions on the average solid packing fraction. Additionally, a numerical Discrete Element Method tool is developed to complement the experimental work by accessing to those granular variables which result difficult to be experimentally obtained such as the local packing fraction, the contacting neighbors and the particle orientation. Packing fractions between approximately 0.53 and 0.67 are measured and computed for the spherical noncohesive grains, for different hydrodynamic, frictional and polydispersity conditions, whereas values down to approximately 0.30 are found for noncohesive dendrite envelopes. Finally, we investigate the packing dynamics, which is the transition from a sedimentation regime to the mechanical equilibrium (packing). The evolution of the local solid fraction, contacting neighbors, mechanical contacts and grain orientation are given
|
Page generated in 0.1235 seconds