Master’s thesis describes the design of multi-band microwave transmitters to study the propagation of electromagnetic waves in the atmosphere with the possibility of modulation of the transmitted signal. Based transmitters are synchronized phase lock loop, frequency multipliers, double balanced diode mixers.

This text analyzes characteristics of audio power amplifiers in class D. The emphasis is placed on more detailed analysis of modulators, drivers, connection topology of power transistors. In the next section of text are analyzed available integrated circuits of power amplifiers in class D which are manufactured by world producers. The last part describes design of all parts of amplifier in class D with discrete components and also of power supplies. According to the plans, the individual parts are made. All parts are tested by measurements and results are evaluated.

This master's thesis is engage in suggestion of low noise 70 cm band amplifier with filter and diode attenuator. At first the thesis describes the basic parameters of amplifier, for example gain, noise figure and dynamic extent. Later in detail describes individual parts, which are the device consist of. At every part of system is mentioned the diagram of connection and values of components, which are ascertained from calculation, simulation and recommendation of producer. The characteristic parameters of amplifier were measured after construction.

The aim of this diploma work is the suggestion and realization of a cardiostimulator of „On Demand“ type operated by microcontroller. The work is structured on four thematic parts. For the correct suggestion of the whole system, firstly is necessary to understand correctly the cell’s electrophysiology and heart’s anatomy, inclusive the cardiology arrhytmia, which are adherent to cardiostimulators. The cardiostimulator is inhibited by the R-wave and is adaptive on a pulse rate of a source signal. The whole system is supplied by batteries and this supplying is taken into consideration. The network’s functionality is realized on the ECG simulator. There are suggested the suitable enhancements in discussion.

This work deals with the two-stage operational amplifier with automatic offset compensation. An operational amplifier is designed in Cadence design environment for possible implementation in technology CMOS07. Emphasis work is placed on minimum offset of the operational amplifier and the parameters, that are listed in the assignment of work.

The first two chapters are devoted to theoretical analysis of issues relating to portable EKG monitor. This chapters are aimed to further acquaint the reader with the issue for subsequent easier of understanding on further steps in the implementation of the device which will be contain in the following chapters. The first chapter is mainly a medical nature. We describe the anatomy and functional properties of the heart. In the next chapter we are deal with detail of electrocardiograph and the conditions for its proper function. Other chapters are devoted to the actual implementation of the facility. We are dealing with the issue of build functional portable EKG monitor. This practical part begins by fourth chapter, which consists block diagram of the device and discusses the required parameters. Next most extensive chapter is devoted to a detailed breakdown of the electrical circuit, including the calculation of the individual components. The last chapter describes the implementation and outcome measurements on test persons.

Cíl disertační práce leží v oblasti modelování a vyhodnocení bezdrátových komunikačních systémů s dvojrozměrným rozprostíráním signálu a jejich klíčových parametrů v závislosti na vybraných vlastnostech moderního bezdrátového komunikačního řetězce. Výzkumné metody použité v této práci spočívají především ve vývoji softwarového simulátoru pro prostředí Matlab, s jehož pomocí, a s využitím statistického přístupu, jsou navržené algoritmy ověřeny. Dále je použit simulátor fyzické vrstvy dle 3rd Generation Partnership Project Long Term Evolution (3GPP LTE), vyvinutý na Technické univerzitě ve Vídni. Tento představuje ideální platformu pro implementaci metody dvojrozměrného (2D) rozprostírání a její vyhodnocení s přihlédnutím k současným bezdrátovým komunikačním systémům. Zjištění prezentovaná v této práci představují především ověření účinnosti systému nazvaného jako Variable Spreading Factor - Orthogonal Code Frequency Division Multiplex (VSF-OFCDM), který využívá principu 2D rozprostírání signálu a zjištění, že VSF-OFCDM systém překonává systémy využívající Orthogonal Division Frequency Multiplex (OFDM), nebo Code Division Multiple Access (CDMA). Dále byla navržena metoda 2D rozprostírání signálu v systému LTE, kde se též potvrdila její účinnost. Díky účinnějšímu potlačení vlivu rychlé variace přenosového kanálu v závislosti na frekvenci a čase, dosahuje systém VSF-OFCDM znatelně vyšší datové prostupnosti.

At the beginning of this work the physiological nature of electromyographic signal is described. Design of miniature, portable EMG amplifier for surface measurement is presented. Creation of program for data visualization is described, followed by description of practical EMG amplifier realization.

This thesis explores the use of nonlinear crystals from theKTiOPO4(KTP) family with the aim to extend the possibleapplications for laser sources and to gain more knowledge aboutthe material’s benefits and limits. The work focussed onoptical parametric oscillators (OPOs) and optical parametricamplifiers (OPAs), which employ second order nonlinearprocesses. Both devices transfer energy from a laser beam at aparticular wavelength to a different wavelength, which istuneable. In OPOs two new beams at different wavelengths aregenerated, whereas in OPAs an existing weak beam is amplified.The essential part of these devices, which enables theoccurrence of the energy conversion, is a nonlinear crystal. Inthis work the ferroelectric crystals KTP and RbTiOPO4(RTP) have been utilized. By modifying the material’s structure,quasi-phasematching can be obtained, which is a crucialrequirement for achieving efficient energy conversion betweenthe incident and the generated waves. The fabrication ofquasi-phasematched crystals is dependent on the controlledreversion of the material’s spontaneous polarisation,which is accomplished by periodic electric field poling. Nanosecond pulses of more than 200 kW were generated in the“eye-safe”region by employing a double pass OPA.Small signal gains exceeding 75 dB were obtained for anessentially diffraction limited beamwithout spectralbroadening of the seed. By subsequent signal coupling intofibres substantial broadening was accomplished. A systematicmeasurement series of several RTP crystals allowed us toaccurately determine the wavelength and temperature dispersionof the refractive index, which are two essential requirementsfor further employment of this material. The OPOs based on RTPwere widely tuneable by controlling the temperature. It wasalso concluded that RTP behaves similar to KTP in parametricdevices, thus being a material, which can sustain high powers,possesses large nonlinear coefficients and can operate in abroad wavelength region.Efficient Raman oscillation concurrent with parametricoscillation was observed and analysed in several KTP samples.This gave further insight into the processes taking placeinside the material when performing as a frequency converter,if the generated idler lies in the absorption band.This thesis also covers the investigation of afemtosecond optical parametric chirped pulse amplifier.Temporally stretched seed pulses were amplified to 85 µJ,resulting in a gain above 60 dB, and subsequent recompressionresulted in 270 fs pulses. <b>Keywords:</b>nonlinear optics, KTiOPO4, optical parametric oscillator, optical parametricamplifier, RbTiOPO4, quasi-phasematching, electric field poling,stimulated Raman scattering. / NR 20140805

We explore the optical parametric amplifier, an optical device where a pump field creates a pair of lower-frequency fields: signal and idler. The pump field is usually treated classically, but this thesis focuses on scenarios where the pump must be treated quantum mechanically. One of these scenarios is the growing field of nonlinear interferometry, where the fundamental sensitivity of a probed relative phase can beat the classical bounds and reach the maximum limit allowed by quantum mechanics, the Heisenberg limit. Indeed, we show that a fully quantum nonlinear interferometer displays a Heisenberg scaling in terms of the mean number of input pump photons. This result goes beyond the well-accepted Heisenberg scaling with respect to the down-converted photons inside the interferometer, which predicts unphysical phase sensitivities starting at a particular input pump energy. Our theoretical findings are particularly useful when designing a nonlinear interferometer with bright pump fields or optimized optical parametric amplifiers for quantum metrology and quantum imaging applications. The quantum nature of the pump field may also play a central role concerning other physical phenomena, like Hawking radiation in the context of black holes. As suggested by several authors, both the optical parametric amplifier and Hawking radiation comprise the creation of fundamental particle pairs. Thus, if the optical parametric amplifier is fully treated quantum mechanically, we may get insight into an open problem in modern physics, namely the black hole information paradox. According to this paradox, the information stored in a black hole can be destroyed once the black hole has evaporated by emitting Hawking radiation, contradicting quantum mechanics. Despite the experimental efforts to build systems that reproduce event horizons and gravitational effects in the laboratory, the evaporation of black holes due to the emission of Hawking radiation remains a challenging task. In this thesis, we experimentally investigate the impact of an evolving pump field in an optical parametric amplifier by optimizing a parametric down-conversion process. We measure the pump and signal photon number properties, finding that the pump field gets chaotic and the signal coherent when the pump displays some sizeable depletion. We arrive at similar conclusions about the pump field from its measured Wigner function. Our experiment is the first step towards a successful experiment that could suggest that information in the black hole is not destroyed but encoded in the emitted Hawking radiation starting at some point in the black hole evolution. We finally discuss further experimental improvements to investigate the parallel between the optical parametric amplifier and Hawking radiation.