Made available in DSpace on 2014-10-09T12:41:53Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:09:30Z (GMT). No. of bitstreams: 0 / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Amostras de dióxido de cério dopadas com La e Fe foram confeccionadas e caracterizadas por uma técnica nuclear baseada em interações hiperfinas conhecida como Correlação Angular Gama-Gama Perturbada (CAP). Como o composto em questão não é radioativo, foram utilizados núcleos radioativos como ponta de prova 111In 111Cd, que decaem através de uma cascata gama-gama 171-245 keV, com nível intermediário possui uma meia-vida de 84ns, spin 5/2- e um momento de quadrupolo elétrico Q= 0,83. Inicialmente uma metodologia para a produção das amostras precisou ser elaborada. As amostras de dióxido de cério e seus dopantes foram produzidas através do processo Sol-Gel, passando por uma calcinação e sinterização até a finalização da amostra. Sendo caracterizada por diversos tipos de técnicas (Difração de Raios-X e Microscopia Eletrônica de Varredura) culminando no estudo através da técnica CAP, para uma compreensão das interações quadrupolares elétricas das amostras e também a possibilidade da existência de comportamento magnético (assunto intensamente investigado dado o interesse na área da spintrônica). Os resultados encontrados foram analisados frente aos conhecimentos encontrados na literatura e as discussões foram feitas em função da variação do elemento dopante, tipos de tratamentos térmicos usados na sinterização e as diferentes temperaturas de medidas. Permitindo uma discussão e interpretação física dos resultados encontrados. / Dissertação (Mestrado) / IPEN/D / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP / FAPESP:11/05408-2

Made available in DSpace on 2014-10-09T12:32:29Z (GMT). No. of bitstreams: 0 / Made available in DSpace on 2014-10-09T14:10:15Z (GMT). No. of bitstreams: 1 03182.pdf: 1972055 bytes, checksum: 9981ae33d320ed8dd71a0aaa2f020331 (MD5) / Tese(Doutoramento) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN/CNEN-SP

Submitted by Claudinei Pracidelli (cpracide@ipen.br) on 2016-02-03T11:57:50Z No. of bitstreams: 0 / Made available in DSpace on 2016-02-03T11:57:50Z (GMT). No. of bitstreams: 0 / Neste trabalho foi realizado um estudo sistemático, das interações hiperfinas (campo hiperfino magnético e campo hiperfino elétrico), nos compostos do tipo RMn2Si2 e RMn2Ge2 (onde R = La, Nd, Pr), sendo que, para a amostra de La foi estudada a série LaMn2(Si(1-x)Gex)2 (onde x = 0, 0.2, 0.4, 0.6, 0.8, 1), por meio da técnica de correlação angular gama-gama perturbada (CAP), utilizando os núcleos de prova 111In(111Cd) e 140La(140Ce). Além disso, foram realizadas medições para a caracterização estrutural utilizando a técnica de difração de raios X, para a caracterização magnética, a nível macroscópico, através de medições de magnetização, caracterização nuclear utilizando a técnica de espectrometria da radiação gama e um estudo complementar por cálculos de primeiros princípios somente para as amostras de LaMn2Ge2 e LaMn2Si2. A maior contribuição para o comportamento magnético nesses compostos tem origem no ordenamento magnético da sub rede do Mn, que aparece em temperaturas relativamente altas, da ordem de 480 K, sendo que, esses compostos possuem um ordenamento antiferromagnético e próximo a temperatura ambiente passam a possuir um ordenamento ferromagnético. Além disso, para o caso especifico dos compostos PrMn2Ge2 e NdMn2Ge2, abaixo de 40K é observado, também, o ordenamento ferromagnético dos spins da sub rede da terra rara. O núcleo de prova 111In(111Cd) foi utilizado para medir, tanto as interações de quadrupolo elétrico, como de dipolo magnético na rede do Mn (interação matrizmatriz). Esses resultados evidenciaram a transição de fase magnética (antiferromagnética para ferromagnética), sendo que, o campo hiperfino magnético, para as duas fases magnéticas, segue o comportamento da função de Brillouin. Já o núcleo de prova 140La(140Ce) permitiu medir a interação de dipolo magnético, tanto originada pela rede do Mn, como pela rede da terra rara. Mas, nesse caso, pode ser verificado somente o campo hiperfino magnético da fase ferromagnética da rede do Mn. Para a análise dos resultados PAC levou-se em conta uma interação matriz-impureza, pois o íon Ce3+ possui um elétron 4f desemparelhado, que pode contribuir para o campo hiperfino total. O composto LaMn2Si2 apresentou o comportamento do campo hiperfino magnético com a temperatura que segue o comportamento da função de Brillouin. Já os compostos LaMn2Ge2, PrMn2Ge2 e NdMn2Ge2 apresentaram um comportamento anômalo ao da função de Brillouin. Esse comportamento pode ser associado a uma forte hibridização da banda 4f do Ce com a banda 3d do Mn, tal conclusão foi reforçada pelos resultados do DOS (densidade de estados), resultados dos cálculos de primeiros princípios, dos compostos LaMn2Si2 e LaMn2Ge2. / Tese (Doutorado em Tecnologia Nuclear) / IPEN/T / Instituto de Pesquisas Energeticas e Nucleares - IPEN-CNEN/SP

Submitted by Marco Antonio Oliveira da Silva (maosilva@ipen.br) on 2016-12-22T16:42:56Z No. of bitstreams: 0 / Made available in DSpace on 2016-12-22T16:42:56Z (GMT). No. of bitstreams: 0 / Neste trabalho foi desenvolvido um Espectrômetro de Correlação Angular Gama- Gama Perturbada Diferencial em Tempo (CAP) constituído por seis detectores cintiladores de BaF2, para realização de medidas de interações hiperfinas (campo hiperfino magnético e gradiente de campo elétrico) em diversos materiais e propiciar estudos na área da física da matéria condensada. O espectrômetro desenvolvido possui um sistema de aquisição não convencional em comparação aos demais equipamentos destinados a medidas de CAP. Ao invés do tradicional Analisador Multicanal (MCA), este espectrômetro utiliza um sistema de aquisição de dados constituído, basicamente, por um Conversor Analógico Digital (ADC) rápido, uma placa digital (I/O) convencional e um roteador construído no laboratório de Interações Hiperfinas (LIH) do IPEN. Este versátil e eficiente sistema, controlado por um software também criado no LIH em LabVIEW, permite a geração simultânea de 30 espectros de coincidências γ - γ atrasadas, número superior em comparação aos 12 espectros do antigo espectrômetro de quatro detectores. Além de medidas de linearidade, resolução em tempo e tempo morto, o funcionamento e o desempenho do espectrômetro foram comprovados através de medidas de CAP utilizando os núcleos de prova 111In -> 111Cd e 181Hf -> 181Ta, cujos resultados são bem conhecidos da literatura. Foram feitas medidas de interação quadrupolar do 181Ta em háfnio metálico e do 111Cd em cádmio metálico, e de campo hiperfino magnético do 111Cd e do 181Ta em níquel. Os resultados destas medidas se mostraram em concordância com a literatura. Adicionalmente foram realizadas medidas inéditas de interações hiperfinas magnéticas no composto intermetálico LaMnSi2 utilizando os núcleos de prova 111Cd e 140Ce. As medidas foram realizadas na faixa de temperatura de 10 K a 400K. No caso das medidas utilizando a sonda 111In -> 111Cd, os resultados mostram uma variação do campo magnético com a temperatura que segue a função de Brillouin. Já no caso das medidas com o núcleo de prova 140La -> 140Ce, o resultado apresentou um comportamento anômalo do campo hiperfino em função de temperatura. Os resultados evidenciam uma forte hibridização da banda 4f do Ce com a banda 3d do Mn, fato verificado e estudado em trabalhos anteriores com compostos semelhantes. / Tese (Doutorado em Tecnologia Nuclear) / IPEN/T / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP

Utilizando tecnicas de espectroscopia-GAMA em linha e reacoes do tipo (hi, xnypGAMA) que populam estados de alto spin estudou-se a estrutura do nucleo duplamente impar ANTPOT.136 PR atraves das reacoes ANTPOT.123 SB (ANTPOT.16 O, 3n)ANTPOT.136 PR e ANTPOT.126 TE (ANTPOT.14 N 4n)ANTPOT.136 PR. Foram realizadas medidas de funcoes de excitacao em quatro energias, e coincidencias GAMA-GAMA-t e distribuicoes angulares em 69mev e 56mev, respectivamente, utilizando detetores hpge de alta resolucao (2kev) e alvos de isotopos enriquecidos de ANTPOT.123 SB (99%) e ANTPOT.126 TE (94%) com espessuras de aproximadamente 9mg/CENTIMETROS QUADRADOS. O esquema de niveis de energia do ANTPOT.136 PR evidencia duas bandas rotacionais que populam um estado isomerico com meia-vida de 92ns. A banda yrast e caracterizada por um staggering em seus niveis de energia, com transicoes m1 intensas e e2 fracas baseada na configuracao PI (h ind.11/2) IND.1/2 TETA NI (h ind.11/2) IND.9/2, de acordo com a sistematica da regiao de massa a=130, mostrando um pequeno energy splitting de 40kev. Na banda secundaria pressupoe-se a configuracao PI (d ind.5/2) IND.3/2 TETA NI (h ind.11/2) IND.11/2. Os resultados experimentais foram interpretados com base no cranked shell model que predizem deformacoes GAMA pequenas e negativas na regiao dos LA e PR / The structure of the doubly odd nucleus 136pr has been studied using techniques of on-line -spectroscopy with the reactions 123Sb (16O,3n) 136 Pr and 126Te(14 N,4n)136 Pr populating high spin states. The excitation functions were measured at four energies, and - t coincidences and angular distributions at 69MeV and 56MeV , respectively, using high resolution HPGe detectors (2keV) and targets of enriched isotopes of 123 Sb (99%) and 126Te (94%) with thicknesses of approximately 9mg/cm². The energy level scheme of 136Pr shows two rotational bands which populate one isomeric state with a half-life of 92s. The Yrast band is characterized by the staggering in energy levels with intense M1 transitions and weak E2 transitions, based on a configuration (h11/2)1/2 v(h11/2)9/2 in agreemment with the sistematics of the mass region A = 130. There is a small energy splitting of 40keV. For the secondary band a configuration n(d5/2)3/2 (h11/2)11/2 is possible. Experimental results were interpreted within the framework of the Cranked Shell Model which predicts small negative deformations in the La and Pr region.

Cette thèse porte sur la manipulation du moment angulaire de la lumière à l'échelle sub-micronique. Le moment angulaire total de la lumière est composé d'une partie de spin, relié au degré de liberté de polarisation circulaire de la lumière, et d'une partie orbitale, relié au degré de libertés spatiaux de la lumière que sont sa direction de propagation (locale et globale) et sa distribution spatiale d'intensité. Le couplage spin-orbite existant entre ces deux contributions permet alors de manipuler les degrés de libertés spatiaux de la lumière par un simple contrôle de son état de polarisation circulaire. Dans cette thèse, nous avons étudié et exploité ce couplage à l'échelle sub-micronique dans deux nouveaux phénomènes que nous avons mis en évidence. Le premier met à profit ce couplage pour permettre d'exciter de manière unidirectionnelle des modes plasmoniques guidés. Une étude complète (numérique, expérimentale et analytique) de ce phénomène nouveau, basé sur un couplage entre le moment de spin du photon incident et le moment orbital extrinsèque des modes plasmoniques guidés dans la courbure d'un guide, est présentée. La deuxième étude présente une voie pour tirer parti du transfert de moment orbital de la lumière à un gaz d'électrons libres dans un métal afin de générer et contrôler le sens et la géométries de boucles de courants sub-microniques dans des structures métalliques. Ce contrôle permettrait la génération d'optomaimants nanométriques, entièrement contrôlés par la lumière, pouvant être modulés aux fréquences optiques. Ce travail a été soutenu par le LABEX Action. / This thesis focuses on the manipulation of the angular momentum of light at the nanoscale.The total angular momentum of light is composed of a spin component, connected to the polarization degree of freedom of light, and an orbital component, related to the spatial degrees of freedom of the light which are its propagation direction (local and global) and its intensity distribution. The spin-orbit coupling between these two contributions allows the control of the spatial degrees of freedom of light by a simple manipulation of its circular polarization state. In this thesis, we have studied and applied this coupling at the nanoscale anbd we have highlighted two new phenomenas. The first one takes part of this coupling to allows unidirectional excitation of plasmonic guided modes. A complete study (numerical, experimental and analytical) of this new phenomenon, based on a coupling between the spin of the incident photon and the extrinsic orbital momentum of the plasmonic guided modes within the curvature of a waveguide, is presented. The second study propose a way to benefit from the transfer of the angular momentum of light to the free electrons gas in a metal to generate and control the direction and the geometry of nanoscale current loops in metallic structures. this control would at optical frequencies. This work was supported by the LABEX Action.

Web applications are subject to intense market forces, fast delivery and rapid requirement and code change. These are the factors that make maintainability a significant concern in any and especially web application development. In this report we develop a functional equivalent prototype from an existing Angular app, using ReactJs and afterward compare their maintainability as defined by ISO/IEC 25010. The maintainability comparison is made by calculating maintainability index for each of the applications using Plato analysis tool. The results do not show a significant difference in the calculated value of the final products. Source code analysis shows that changes in data flow need more modification in the Angular app, but with the objective oriented approach provided by Angular, we can have smaller chunks of code and thus higher maintainability per file and respectively a better average value. We conclude that regarding the lack of research and models in this area, MI is a consistent measurement model and Plato is a suitable tool for analysis. Though maintainability is highly bounded to the implementation, functionalities which are provided by the Angular framework as a bundle is more appropriate for large enterprises and complex products where React works better for smaller products.

L'émergence d'une une nouvelle classe de matériaux, des isolants topologiques, a stimulé un vaste champ de recherche. Bismuth, un élément du groupe V du tableau périodique, est un des ingrédients clé d'une famille d'isolants topologiques. Pour des applications dans la technologie des composants électroniques, il est essentiel de maîtriser la préparation des matériaux en couches minces. Dans ce travail de thèse, nous avons étudié la croissance et la structure électronique de bismuth sur les surfaces (100) et (111) de semi-conducteur III-V InAs.Déposition de Bi sur la surface InAs(100) résulte en une auto-organisation de Bi qui forme des lignes de taille atomique. On montre que le bismuth interagit extrêmement faiblement avec la surface car la structure d'origine de la surface propre de l'InA(100) reste intacte. L'étude de la bande valence montre la présence d'états résonants fortement dépendants de l'énergie de photons et de la polarisation de la lumière, en cohérence avec la structure quasi unidimensionnelle de la surface.La spécificité de la surface InAs(111) est qu'elle a deux terminaisons différentes: par In, (face A) et par As, (face B). Les deux faces présentent des reconstructions différentes. Par la photoémission des niveaux de coeur nous avons montré une différence de réactivité chimique entre les faces A et B. La croissance de Bi sur la face A résulte en un monocristal de haute qualité pour les films à partir de 10 monocouches. Par contre, lors du dépôt de premières couches, la face B montre une croissance en îlots et un bon monocristal est obtenu seulement pour des films d'au moins de 50 monocouches.Pour la même face, A ou B, nous avons observé des différences de croissance plus subtiles entre les surfaces préparées soit par le bombardement ionique et des recuits soit par l'épitaxie par jets moléculaires.La photoémission résolue en angle a permit de caractériser la dispersion des bandes dans les films de Bi. La dispersion est tout à fait comparable au cristal massif de Bi. La dernière étape consistait à étudier la structure électronique d'un monocristal de Sb déposé sur le film de Bi.Les surfaces propres de InAs(111)A et InAs(111)B présentent une courbure de bande qui résulte en formation d'une couche d'accumulation d'électrons. En déposant le Bi sur ces surfaces, la couche d'accumulation est préservée, elle est même amplifié, car Bi agit comme le donneur dans l'InAs.La couche d'accumulation se traduit par un confinement quantique des électrons, mesurable par la photoémission résolue en angle.Mots clés :Structure électronique de surface, ARPES, semimétal, courbure de bande, Gaz-2D, Bismuth, Sb, InAs(111)A, InAs(111)B, puits quantique, surface Fermi, couches minces. / A new class of material is coming up, Topological Insulators, have opened a wide field of research. Bismuth, an element of group V of periodic table, is one of the key ingredient of this Topological Insulators family. With the aim of improving technological applications, especially the electronic compounds, it is of most importance to control the preparation of thin films materials. Within this Phd work, we studied the growth and Bismuth electronic structure on (100) and (111) semiconductor III-V InAs surfaces.Bi deposition on InAs(100) surface result of a Bi self-assembly which forms lines at atomic scale. We show Bi interact extremely weakly with the surface because the beginning structure of clean InAs(100) surface stay unharmed. The study of valence band sheds light on the existence of resonant states strongly photon energy dependent and also depend on the light polarization, consistent with almost one dimensional structure surface.InAs(111) surface specific feature is that it has both surface ending different : In ending, (face A) and As ending, (face B). The both faces pointed out distinguishable reconstructions. By the core-level photoemission we identified a chemical reactivity difference taking place between A and B faces. Bi growth on A-face tend to be a high quality monocrystal for those films from a thickness of 10 monolayers. On the other hand, during the deposition of first layers, the B-face show an island growth and a good monocrystal is obtained only available for films with 50 monolayers at least.For the same face, A or B, we have seen some growth discrepancies more subtle between prepared surfaces either by ionic bombardment and annealing (IBA) either by molecular beam epitaxy (MBE).The angular resolved photoemission allowed to identify the band dispersion inside of this Bi films. The dispersion is absolutely relative to the bulk Bi crystal. The final step involved the study of Sb monocrystal electronic structure deposited onto Bi film.Clean InAs(111)A and InAs(111)B surfaces indicate a band bending which result in the accumulation electron charge formation. With depositing Bi onto these surfaces, the accumulation layer would be kept, it is also increased, given that Bi acts as a donor-like in InAs. The accumulation layer is characterized by an electron quantum confinement, measurable by angle resolved photoemission.Keywords:Electronic structure surface, ARPES, semimetal, band bending effect, 2DEG, Bismuth, Sb, InAs(111)A, InAs(111)B, quatum wells, Fermi surface, thin films.

Magister Scientiae (Medical Bioscience) - MSc(MBS) / Some African mole-rats of the family Bathyergidea have dramatically different ecological niches which may cause selective anatomical adaptations. Bathyergus suillus lives in sandy soil and eats a wide range of food whereas Georychus capensis is restricted to the mountainous hard soil and eats mainly geophytes. Georychus capensis is considered a chisel-tooth digger in that it uses its incisors to dislodge soil while Bathyergus suillus is a scratch-digger that uses both its incisors and large front paws to dislodge soil. The purpose of this study was to compare certain aspects of the masticatory anatomy of Bathyergus suillus and Georychus capensis. In particular the question that drives this study is: Do the differences in ecology of the two species reflect in the anatomical adaptation of their masticatory apparatus? Nine whole body specimens of each species were obtained for this study. The masticatory apparatus of each specimen was dissected, examined and analysed.Selected bones of their skulls were investigated to determine their gross morphology. Digitalized images were captured by a high-resolution Olympus digital camera and were analysed by DOCU analysis software, in order to determine the morphometric parameters. In addition, the cleaned skulls of each species were weighed with a chemical balance. In order to make the comparison of the four muscles of mastication more effective than when using only their linear measurements, the mass (in grams) of each skull was divided by the length of each metric traits squared in order to yield their respective indices. Various statistical tests were used.This study has thus revealed some dissimilarities between the two species.Comparison of the two species reveals that one of the more distinguishing differences between the two is their upper incisors. There are also significant differences in the morphology and dimensions of their angular plates. And the external pterygoid muscle is significantly larger in Georychus capensis than in Bathyergus suillus, there are no significant differences between the others of the masticatory muscles of the two species.The feeding and foraging activities of Bathyergus suillus as well as Georychus capensis have close relationship with their lifestyles (digging abilities and adaptations). Bathyergus suillus is predisposed to dig with its incisors as well as its large front paws, and the range of food is large, whereas Georychus capensis uses its incisors only to dig, and the range of food is limited. Subsequently the skull of Bathyergus suillus is bigger than Georychus capensis. But, due to the environment of the latter, strong incisors are needed to perform its feeding and digging activities. The investigation thus reveals that the two selected species have successfully adapted their anatomical masticatory elements to their environments.

Philosophiae Doctor - PhD / In the first experiment high spin states in 194Tl, excited through the 181Ta (18O, 5n) heavyion fusion evaporation reaction were studied using the AFRODITE array at iThemba LABS. The γ-γ coincidences, RAD ratios and linear polarization measurements were carried out and the previously known level scheme of 194Tl was significantly extended. A total of five rotational bands four of which are new were observed. A pair of rotational bands associated with the πh9/2 ⊗ νi−1 13/2 configuration at lower spins and with the πh9/2 ⊗ νi−3 13/2 configuration at higher spins was found and interpreted as the first possible chiral bands followed above the band crossing. The two 4-quasiparticle bands show exceptionally close near-degeneracy in the excitation energies. Furthermore close similarity is also found in their alignments and B(M1)/B(E2) reduced transition probability ratios. In the second experiment lifetimes in 194Tl were measured using the DSAM technique with the excited states in this nucleus populated through the 181Ta (18O, 5n) reaction. A total of 25 lifetimes and 30 reduced transition probabilities of magnetic dipole B(M1) and electric quadrupole B(E2) have been evaluated. Furthermore B(M1) and B(E2) reduced transition probabilities in Bands 1 and 4, which have been regarded as chiral candidates, were found to be close to each other and reveals strong splitting along spin values. This further supports the proposed chiral nature of these two bands.