Vätgas kan framställas från förnybara energikällor genom vattenelektrolys med anjonbytande membran (AEMWE). AEMWE har vissa fördelar jämfört med traditionell alkalisk vattenelektrolys och elektrolysmed protonledande membran. Till exempel finns det möjlighet att använda alkalisk elektrolyt (även rent vatten) och billiga platinagruppsmetallfria katalysatorer tillsammans med ett anjonbytesmembran. Den största utmaningen med tekniken är att uppnå utmärkt och stabil prestanda för membran och elektroder. AemionTM anjonbytande membran (AEMs) av olika tjocklek, vattenupptag och kapacitet undersöktes i ett AEMWE system med 5 cm2 elektrodarea. Elektrokemisk prestanda hos dessa kommersiella AEM studerades med hjälp av porösa nickel elektroder. Bland de undersökta membranen visade AF2-HWP8-75-X stabil prestanda med en högfrekvent resistans (HFR) på 90 mΩ•cm2 och kunde nå en strömtäthet på 0,8 A/cm2 vid 2,38 V med 1 M KOH vid 60 ˚C.  AEMWE med AF2-HWP8-75-X och olika elektrodkombinationer undersöktes under samma driftsförhållanden. En elektrodkombination med Raney-Ni och NiFeO som katod respektive anod visade bäst prestanda under utvärderingen och gav en strömtäthet på 1,06 och 3,08 A/cm2 vid 2,00 respektive 2,32 V. KOH-lösningens temperatur och koncentration sänktes till 45 ˚C respektive 0,1 M för att undersöka effekten av driftsparametrar på flödescellens prestanda. Flödescellen uppvisade god stabilitet under de nya driftsförhållandena, men dess prestanda minskade avsevärt. Den nådde en strömtäthet på 0,8 A/cm2 vid 2,25 V. / Hydrogen can be produced from renewable energy sources using a novel anion exchange membrane water electrolysis (AEMWE) system. AEMWE has some benefits over the currently used state-of-the-art alkaline and proton exchange membrane water electrolysis systems. For instance, there is a possibility of using alkaline electrolytes (even pure water) and low-cost platinum-group-metal free catalysts together with an ion exchange membrane. However, the main challenge is that the AEMWE system should show excellent and stable performance, depending on the stability of the membrane and the electrodes. AemionTM anion exchange membranes (AEMs) of different thickness and water uptake capacity were investigated using a 5 cm2 AEMWE system. The electrochemical behaviour of these commercial AEMs was studied using nickel (Ni) felt electrodes. Among the investigated AEMs, the AF2-HWP8-75-X showed stable performance with a high frequency resistance (HFR) of 90 mΩ•cm2 and was able to reach a current density of 0.8 A/cm2 at 2.38 V using 1 M KOH at 60 ˚C.  AEMWE systems based on AF2-HWP8-75-X and different electrode combinations were examined under the same operating conditions. An electrode combination with Raney-Ni and NiFeO as cathode and anode, respectively, showed the best performance during the degradation test and provided a current density of 1.06 and 3.08 A/cm2 at 2.00 and 2.32 V, respectively. The operating temperature and concentration of the KOH solution were reduced to 45 ˚C and 0.1 M, respectively, to study the effect of operating parameters on the flow cell performance. The flow cell showed good stability under the new operating conditions, but its performance was reduced significantly. It reached a current density of 0.8 A/cm2 at 2.25 V.

Linear covalently closed (LCC) DNA minivectors serve to be superior to conventional circular covalently closed (CCC) plasmid DNA (pDNA) vectors due to enhancements to both transfection efficiency and safety. Specifically, LCC DNA minivectors have a heightened safety profile as insertional mutagenesis is inhibited by covalently closed terminal ends conferring double-strand breaks that cause chromosomal disruption and cell death in the low frequency event of chromosomal integration. The development of a one-step, E. coli based in vivo LCC DNA minivector production system enables facile and efficient production of LCC DNA minivectors referred to as DNA ministrings. This novel in vivo system demonstrates high versatility, generating DNA ministrings catered to numerous potential applications in gene therapy and vaccine development. In the present study, numerous aspects pertaining to the generation of gene therapeutics with LCC DNA ministrings have been explored with relevance to both industry and clinical settings. Through systematic assessment of induction duration, cultivation strategy, and genetic/chemical modifications, the novel in vivo system was optimized to produce high yields of DNA ministrings at ~90% production efficiency. Purification of LCC DNA ministrings using anion exchange membrane chromatography demonstrated rapid, scalable purification of DNA vectors as well as its potential in the separation of different DNA isoforms. The application of a hydrogel-based strong Q-anion exchange membrane, with manipulations to salt gradient, constituted effective separation of parental supercoiled CCC precursor pDNA and LCC DNA. The resulting DNA ministrings were employed for the generation of 16-3-16 gemini surfactant based synthetic vectors and comparative analysis, through physical characterization and in vitro transfection assays, was conducted between DNA ministring derived and CCC pDNA derived lipoplexes. Differences in DNA topology were observed to induce differences in particle size and DNA protection/encapsulation upon lipoplex formation. Lastly, the in vivo DNA minivector production system successfully generated gagV3(BCE) LCC DNA ministrings for downstream development of a HIV DNA-VLP (Virus-like particle) vaccine, thus highlighting the capacity of such system to produce DNA ministrings with numerous potential applications.

Ce travail porte sur la synthèse et la caractérisation de membranes polymères échangeuses d'anions, destinées à la protection de l'électrode à air dans une batterie lithium-air (en vue d'une application pour véhicule électrique). Ces matériaux à architecture de réseaux interpénétrés de polymères (RIP) associent un réseau polyélectrolyte cationique hydrocarboné, la poly(épichlorohydrine) (PECH), à un réseau de polymère neutre qui peut être soit hydrocarboné, soit fluoré. Tout d'abord, la synthèse du réseau polyélectrolyte et son assemblage sur l'électrode à air ont été optimisés. Une première série de RIP associant ce réseau PECH à un réseau de poly(méthacrylate d'hydroxyéthyle) a été synthétisée. Une seconde série de matériaux combinant ce même réseau PECH à un réseau de polymère fluoré a été développée. L'ensemble de ces matériaux a été caractérisé, et pour chaque série de RIP, la méthode de synthèse et la composition ont été optimisées. Les membranes RIP présentent des propriétés améliorées par rapport au réseau simple de PECH. L'électrode à air protégée par ces nouvelles membranes échangeuses d'anions présente une stabilité améliorée dans les conditions de fonctionnement de la batterie lithium-air. Plus précisément, une durée de vie de 1000 h est obtenue lorsque l'électrode à air a été modifiée avec un RIP fluoré, soit une augmentation d'un facteur 20 de la durée de vie de l'électrode non modifiée. / This work focuses on the synthesis and characterization of polymer membranes to be used as anion exchange membranes for protection on an air electrode in a new lithium–air battery for electric vehicle. In these materials showing interpenetrating polymer networks (IPN) architecture, a hydrogenated cationic polyelectrolyte network, the poly(epichlorohydrin) (PECH), is associated with a neutral network, which can be either hydrogenated or fluorinated. First, the synthesis of the polyelectrolyte network and the membrane/electrode assembly were optimized. Second, a first IPN series associating the PECH network with a poly(hydroxyethyl methacrylate) network was synthesized. Third, the same PECH network was associated with a fluorinated polymer network. All the materials were characterized, and optimal synthesis methods as well as an optimal composition were determined for each association. The IPNs show improved properties compared with the single PECH network. The air electrode protected by these new anion exchange membranes shows improved stability in the working conditions of the lithium-air battery. Specifically, a lifetime of 1000 h was obtained when the electrode was modified with a fluorinated IPN, a 20-fold increase in the lifetime of the non-modified electrode.

Interactions between plant roots and soil microorganisms in the rhizosphere are critical for plant growth. However, understanding of precisely how root exudates influence the diversity and activity of rhizosphere microorganisms is limited. The main objective of this study was to investigate the effect of radiata pine (Pinus radiata) root exudates on rhizosphere soil microbial communities, with an emphasis on the role of low molecular weight organic anions. The study involved the development and validation of new methods for investigating rhizosphere processes in a purpose-built facility. This included development of an in situ sampling technique using an anion exchange membrane strip to collect a range of organic anions exuded from radiata pine roots grown in large-scale rhizotrons. These included tartarate, quinate, formate, malate, malonate, shikimate, lactate, acetate, maleate, citrate, succinate and fumarate. Soil microbial activity and diversity were determined using dehydrogenase activity and denaturing gradient gel electrophoresis. Links between organic anions in root exudates and rhizosphere soil microbial community structures were investigated by comparing wild type and genetically modified radiata pine trees which were grown in rhizotrons for 10 months. As expected, there was considerable temporal and spatial variability in the amounts and composition of organic anions collected, and there were no consistent or significant differences determined between the two tree lines. Significant differences in rhizosphere microbial communities were detected between wild type and genetically modified pine trees; however, they were inconsistent throughout the experiment. The shifts in microbial communities could have been related to changes in exudate production and composition. Based on results from the main rhizotron experiment, a microcosm study was carried out to investigate the influence of selected pine root exudate sugars (glucose, sucrose and fructose) and organic anions (quinate, lactate and maleate) on soil microbial activity and diversity. Soil microbial activity increased up to 3-fold in all of the sugar and organic anion treatments compared to the control, except for a mixture of sugars and maleate where it decreased. The corresponding impacts on soil microbial diversity were assessed using denaturing gradient gel electrophoresis and 16S rRNA phylochips. Addition of the exudate compounds had a dramatic impact on the composition and diversity of the soil microbial community. A large number of bacterial taxa (88 to 1043) responded positively to the presence of exudate compounds, although some taxa (12 to 24) responded negatively. Organic anions had a greater impact on microbial communities than sugars, which indicated that they may have important roles in rhizosphere ecology of radiata pine. In addition, a diverse range of potentially beneficial bacterial taxa were detected in soil amended with organic anions, indicating specific regulation of rhizosphere microbial communities by root exudates. This project highlighted the considerable challenges and difficulties involved in detailed investigation of in situ rhizosphere processes. Nonetheless, the findings of this study represent a significant contribution to advancing understanding of relationships between root exudates and soil microbial diversity, which will be further enhanced by refinement and application of the specific methodologies and techniques developed.