The aim of the present work was to screen the main methods for the synthesis of conjugated polymers for their suitability in the preparation of conductive polymer brushes. The main focus was put on the grafting of intrinsically soluble substituted regioregular polyalkylthiophenes because of their excellent optoelectronic properties. The resulting polymer films were characterized and their optoelectrical properties studied. For the first time, a synthesis of conductive polymer brushes on solid substrates using “grafting-from” method was performed. The most important, from my opinion, finding of this work is that regioregular head-to-tail poly-3-alkylthiophenes – benchmark materials for organic electronics - can be now selectively grafted from appropriately-terminated surfaces to produce polymer brushes of otherwise soluble polymers - the architecture earlier accessible only in the case of non-conductive polymers. In particular, we developed a new method to grow P3ATs via Kumada Catalyst Transfer Polymerization (KCTP) of 2-bromo-5-chloromagnesio-3-alkylthiophene. Exposure of the initiator layers to monomer solutions leads to selective chain-growth polycondensation of the monomers from the surface, resulting into P3AT brushes in a very economical way. The grafting process was investigated in detail and the structure of the resulting composite films was elucidated using several methods. The obtained data suggests that the grafting process occurs not only at the poly(4-bromstyrene) (PS-Br)/polymerization solution interface, but also deeply inside the swollen PS-Br films, penetrable for the catalyst and for the monomer The grafting process was investigated in detail and the structure of the resulting composite film was elucidated using ellipsometry, X-ray Photoelectron Spectroscopy (XPS), Rutherford backscattering spectroscopy (RBS), and Conductive atomic force microscopy (C-AFM). The obtained data suggests that the grafting process occurs not only at the poly(4-bromostyrene), PS-Br/polymerization solution interface, but also deeply inside the swollen PS-Br film, which is penetrable for the catalyst and the monomer. The process results in an interpenetrated PS-Br/P3HT network, in which relatively short poly(3-hexylthiophene), P3HT grafts emanate from long, cross-linked PS-Br chains. A further method investigated during our work was to covalently graft regioirregular P3HT to substrates modified by macromolecular anchors using oxidative polymerization of 3HT with FeCl3. P3HT layers with variable thicknesses from 30 nm up to 200 nm were produced using two steps of polymerization reaction. The P3HT obtained by oxidative polymerization had always an irregular structure, which was a result of the starting monomer being asymmetric, which is undesired for electronic applications. The third method for the production of conductive polymer brushes was to graft regioregular poly(3,3''-dioctyl-[2,2';5',2'']terthiophene) (PDOTT) by electrochemical oxidative polycondensation of symmetrically substituted 3,3''-dioctyl-[2,2';5',2'']terthiophene (DOTT). A modification of the supporting ITO electrode by the self-assembled monolayers (SAMs) of compounds having polymerizable head-groups with properly adjusted oxidative potentials was found to be essential to achieve a covalent attachment of PDOTT chains. The polymer films produced show solvatochromism and electrochromism, as well as the previous two methods. After polymerization, the next step towards building organic electronic devices is applying the methods obtained in nano- and microscale production. Block copolymers constitute an attractive option for such surface-engineering, due to their ability to form a variety of nanoscale ordered phase-separated structures. However, block copolymers containing conjugated blocks are less abundant compared to their non-conjugated counterparts. Additionally, their phase behaviour at surfaces is not always predictable. We demonstrated in this work, how surface structures of non-conductive block copolymers, such as P4VP-b-PS-I, can be converted into (semi)conductive P4VP-b-PS-graft-P3HT chains via a surface-initiated polymerization of P3HT (Kumada Catalyst Transfer Polymerization (KCTP) from reactive surface-grafted block copolymers. This proves that our method is applicable to develop structured brushes of conductive polymers. We believe that it can be further exploited for novel, stimuli-responsive materials, for the construction of sensors, or for building various opto-electronic devices. The methods developed here can in principle be adapted for the preparation of any conductive block copolymers and conductive polymers, including other interesting architectures of conductive polymers, such as block copolymers, cylindrical brushes, star-like polymers, etc. To this end, one needs to synthesize properly-designed and multi-functional Ni-initiators before performing the polycondensation.

Au cours de ce travail nous avons étudié la réalisation de couches moléculaires d’accroche terminées amine. Sur l’oxyde de silicium l’aminopropyletriméthoxysilane (APTMS) a été déposé à partir d’une solution, et via une méthode originale par voie sèche qui nous a permis de mettre en évidence les temps caractéristiques de greffage et d’organisation de la couche d’APTMS. Sur l’or, les monocouches d’aminoéthanethiol (AET) et d’aminothiophénol (ATP) ont été réalisées à partir d’une solution. Nous avons ensuite étudié les aspects structuraux et cinétiques du greffage des fullerènes C60 sur de telles couches d’accroche, constituées de terminaisons amines soit sur toute la surface soit en des zones isolées (couches binaires). Les techniques de spectroscopie UV-Visible, IRTF, Raman, et XPS ont permis d’observer le greffage des C60 sur les couches aminées. La spectroscopie Raman en mode exalté (SERS) a mis en lumière que les molécules d’ATP étaient plus inclinées après le greffage à reflux des C60. Les analyses des diverses couches à l’échelle moléculaire ont été menées par microscopie à sondes locales (AFM, STM), et les mesures électriques réalisées sur or à l’aide de la pointe STM ont montré le caractère isolant de la couche d’accroche seule et un gap proche de celui du C60 après greffage des fullerènes. Elles ont également mis en évidence que le C60 était greffé sélectivement sur les zones terminées amines des couches d’accroche binaires. Enfin, une application potentielle des couches de C60 étant les mémoires moléculaires, les propriétés électriques des diverses couches réalisées ont été mesurées à l’aide de contacts électriques évaporés. / In this work we studied the preparation of sticking amine- terminated molecular layers. On silicon dioxide, 3-aminopropyltrimethoxysilane (APTMS) was de- posited from a solution, and using an original dry method that allowed us to determine time constants of APTMS layer grafting and organization. On gold surfaces, monolayers of aminoethanethiol (AET) and aminothiophenol (ATP) molecules were prepared from a solution. Then, we studied structural and kinetic aspects of ullerene C60 grafting on such sticking layers, terminated by amines either all over the surface or on isolated areas (binary layers). UV-visible, FTIR, Raman and XPS spectroscopy techniques enabled to observe that C60 was grafted on the amine-terminated layers. Exalted Raman spec- troscopy (SERS) revealed ATP molecules were more tilted after C60 grafting under reflux. Analyses of all the layers were made at a molecular level by local probe microscopy (AFM, STM), and electrical measurements performed on gold using the STM tip showed the in- sulating nature of the sticking layer whereas a gap close to that of C60 appeared after grafting of fullerenes. They also highlighted that C60 was selectively grafted on amine- terminated zones within binary sticking layers. At last, one of potential applications of C60 layers being molecular memory cells, electrical properties of the various studied layers were measured through evaporated electrical contact pads.

The aim of the present work was to screen the main methods for the synthesis of conjugated polymers for their suitability in the preparation of conductive polymer brushes. The main focus was put on the grafting of intrinsically soluble substituted regioregular polyalkylthiophenes because of their excellent optoelectronic properties. The resulting polymer films were characterized and their optoelectrical properties studied. For the first time, a synthesis of conductive polymer brushes on solid substrates using “grafting-from” method was performed. The most important, from my opinion, finding of this work is that regioregular head-to-tail poly-3-alkylthiophenes – benchmark materials for organic electronics - can be now selectively grafted from appropriately-terminated surfaces to produce polymer brushes of otherwise soluble polymers - the architecture earlier accessible only in the case of non-conductive polymers. In particular, we developed a new method to grow P3ATs via Kumada Catalyst Transfer Polymerization (KCTP) of 2-bromo-5-chloromagnesio-3-alkylthiophene. Exposure of the initiator layers to monomer solutions leads to selective chain-growth polycondensation of the monomers from the surface, resulting into P3AT brushes in a very economical way. The grafting process was investigated in detail and the structure of the resulting composite films was elucidated using several methods. The obtained data suggests that the grafting process occurs not only at the poly(4-bromstyrene) (PS-Br)/polymerization solution interface, but also deeply inside the swollen PS-Br films, penetrable for the catalyst and for the monomer The grafting process was investigated in detail and the structure of the resulting composite film was elucidated using ellipsometry, X-ray Photoelectron Spectroscopy (XPS), Rutherford backscattering spectroscopy (RBS), and Conductive atomic force microscopy (C-AFM). The obtained data suggests that the grafting process occurs not only at the poly(4-bromostyrene), PS-Br/polymerization solution interface, but also deeply inside the swollen PS-Br film, which is penetrable for the catalyst and the monomer. The process results in an interpenetrated PS-Br/P3HT network, in which relatively short poly(3-hexylthiophene), P3HT grafts emanate from long, cross-linked PS-Br chains. A further method investigated during our work was to covalently graft regioirregular P3HT to substrates modified by macromolecular anchors using oxidative polymerization of 3HT with FeCl3. P3HT layers with variable thicknesses from 30 nm up to 200 nm were produced using two steps of polymerization reaction. The P3HT obtained by oxidative polymerization had always an irregular structure, which was a result of the starting monomer being asymmetric, which is undesired for electronic applications. The third method for the production of conductive polymer brushes was to graft regioregular poly(3,3''-dioctyl-[2,2';5',2'']terthiophene) (PDOTT) by electrochemical oxidative polycondensation of symmetrically substituted 3,3''-dioctyl-[2,2';5',2'']terthiophene (DOTT). A modification of the supporting ITO electrode by the self-assembled monolayers (SAMs) of compounds having polymerizable head-groups with properly adjusted oxidative potentials was found to be essential to achieve a covalent attachment of PDOTT chains. The polymer films produced show solvatochromism and electrochromism, as well as the previous two methods. After polymerization, the next step towards building organic electronic devices is applying the methods obtained in nano- and microscale production. Block copolymers constitute an attractive option for such surface-engineering, due to their ability to form a variety of nanoscale ordered phase-separated structures. However, block copolymers containing conjugated blocks are less abundant compared to their non-conjugated counterparts. Additionally, their phase behaviour at surfaces is not always predictable. We demonstrated in this work, how surface structures of non-conductive block copolymers, such as P4VP-b-PS-I, can be converted into (semi)conductive P4VP-b-PS-graft-P3HT chains via a surface-initiated polymerization of P3HT (Kumada Catalyst Transfer Polymerization (KCTP) from reactive surface-grafted block copolymers. This proves that our method is applicable to develop structured brushes of conductive polymers. We believe that it can be further exploited for novel, stimuli-responsive materials, for the construction of sensors, or for building various opto-electronic devices. The methods developed here can in principle be adapted for the preparation of any conductive block copolymers and conductive polymers, including other interesting architectures of conductive polymers, such as block copolymers, cylindrical brushes, star-like polymers, etc. To this end, one needs to synthesize properly-designed and multi-functional Ni-initiators before performing the polycondensation.

Die vorliegende Dissertation beschreibt die Erarbeitung anwendbarer Methoden zum Aufbau Oberflächenplasmonenresonanz (SPR)-basierter DNA-Mikroarrays. Es werden die Beziehungen zwischen allen Teilschritten der Entwicklung eines DNA-Biosensors aufgezeigt. Die Sondendichte auf der Sensoroberfläche ist entscheidend für die Leistungsfähigkeit eines DNA-Chips. In dieser Arbeit werden thiolmodifizierte Sonden und solche mit Phosphorothioatgruppen verwendet und verglichen. Der Aufbau selbstorganisierender Monoschichten, bestehend aus Mercaptoalkoholen und thiolmodifizierten DNA-Einzelsträngen, wird mittels Röntgenphotoelektronenspektroskopie untersucht. Es werden bis zu 180 Spots auf einem SPR-Chip aufgetragen. Eine weitere Erhöhung der Anzahl an Sondenorten pro Chip wird mit einer hydrophil/hydrophoben Strukturierung der Arrayoberfläche erreicht. Dies erfolgt durch das Mikrokontaktdrucken mit Alkanthiolen. Die selektiven Hybridisierungen der Produkte der Polymerase-Kettenreaktion (PCR) werden bei SPR-Messungen auf DNA-Mikroarrays detektiert. Eine schnelle markierungsfreie Echtzeitanalyse wird bei Hybridisierungen im mikrofluidischen Kanal innerhalb weniger Minuten erzielt. Die Anwendbarkeit dieser Methoden wurde anhand der Mutationsanalyse der Fusionsgene AML1-ETO und CBFB-MYH11 bei der akuten myeloischen Leukämie bestätigt. Die Hybridisierungseffizienz auf DNA-Mikroarrays hängt stark von der Sodensequenz ab. SPR-Experimente zeigen, dass die Ausbildung der Haarnadelstrukturen die Ursache dafür ist. Ein Computerprogramm (EGNAS) auf Grundlage eines neu entwickelten Nucleobasen-Sequenzentwurf-Algorithmus, ermöglicht die Generierung vollständiger Sequenzsätze. Die Intra- und Interstrangeigenschaften dieser Sequenzen können kontrolliert werden, um Haarnadelstrukturen und Kreuzhybridisierungen zu vermeiden. Dadurch können optimierte Sequenzen für Anwendungen auf DNA-Chips oder in der DNA-Nanobiotechnologie entworfen werden.

The research presented in this dissertation is focused on the construction of complex molecular structures on planar gold and silicon dioxide surfaces using a variety of surface modification techniques, along with thorough surface characterization at each modification step. The dissertation is structured into six separate chapters. In Chapter 1, an introduction to the importance and implications of molecular level surface modification, commonly employed surface modification methods, and available surface characterization techniques is presented. Chapter 2 shows applications of novel methodologies for the functionalization of gold surfaces using alkane dithiol self-assembled monolayers and thiol-ene click chemistry. The resulting functionalized gold substrates demonstrate higher chemical stability than alkanethiol self-assembled monolayers alone and allow spatially controlled functionalization of gold surfaces with light. In Chapter 3, work on tunable hydrophobic surfaces is presented. These surfaces are prepared using a combination of organosilane chemistry, layer-by-layer polyelectrolyte deposition, and thiol-ene chemistry. These hydrophobic surfaces demonstrate high mechanical and chemical stability, even at low pH (1.68). The pinning of water droplets could be tuned on them by the extent of their thermal treatment. Comprehensive surface characterization using X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), spectroscopic ellipsometry, atomic force microscopy, and water contact angles was carried out on the molecular assemblies prepared on gold and silicon dioxide surfaces. Chapters 4 and 5 are focused on the application, data interpretation, and enhancement in sensitivity of different surface characterization methods. In Chapter 4, XPS, ToF-SIMS, and principal components analysis are used to probe a real world corrosion-type problem. This systemic study showed the destruction of a protective coating composed of a nitrilotris(methylene)triphosphonic acid by a low-intensity fluorine plasma. In Chapter 5, enhancement in ToF-SIMS signals is shown via bismuth metal deposition. These surfaces are also probed by spectroscopic ellipsometry using the interference enhancement method. Finally, Chapter 6 concludes this dissertation by describing possible future work.