Spelling suggestions: "subject:"synkronmaskin"" "subject:"asynchronmaschine""
1 |
Experimentell utvärdering av en luftgapslindad flerpolig asynkronmaskinLouie ying, Michell January 2024 (has links)
In today’s society, there is a growing emphasis on renewable energy generation to reduce greenhouse gas emissions, particularly carbon dioxide (CO2) and methane(CH4). Among renewable sources, wind power has emerged as one of the most rapidly advancing technologies, with floating offshore wind turbines showing significant potential due to their ability to be installed in deeper waters. This study investigates the feasibility of implementing a LFA machine The abbreviation"LFA" used in this report for the machine comes from swedish "Luftgapslindadflerpolig asynkronmaskin" (meaning "Airgap armature winding Multipole Asynchnousmachine") in a Counter Rotating Axis Floating Turbine (CRAFT) system, developed by Hans Bernhoff and the Norwegian company WorldWideWind. The CRAFT system consists of two three-bladed turbines rotating in opposite directions, linked to a rotor and stator respectively, to maximize potential energy extraction by doubling the angular velocity. The LFA aims to optimize the potential between the turbines by regulating the speed of one of the axes. This report specifically examines the torque curve of the LFA when it operates as a motor at various speeds. Experimental setups included coupling the LFA motor with a known generator(TGET550-5KW-300R) and measuring the motor’s performance. The data collected allowed for an analysis of the torque and efficiency of the LFA. Despite initial challenges with power limitations from the drive unit, iterative tests and calculations provided insights into the LFA’s inertia and torque characteristics. The study concludes with an evaluation of the LFA’s suitability for enhancing the efficiency of the CRAFT system in floating offshore wind applications. The study concludes with an evaluation of the LFA’s suitability for enhancing the efficiency of the CRAFT system in floating offshore wind applications.
|
2 |
Utvärdering av roterande borstlösfrekvensomformare tillspårledningar / Evaluation of rotating brushlessfrequency converters for trackcircuitAldahan, Leith, Kudoori, Ivan January 2019 (has links)
Spårledningar används inom tunnelbanan för att visa tågets position samt bestämma tågets hastighet genom att bryta spänningsamplituden i signalen vid olika frekvenser. Frekvensen till spårledningen fås från en roterande frekvensomformare. I dagens anläggning används roterande frekvensomformare med borstar. Dessa avger i relärum mycket värme och ger miljöproblem i form av koldamm från borstarna. Det befintliga systemet är gammal och har funnits i drift över 30 år, därför håller reservdelar på att ta slut samt service till systemet svårtillgängligt. Detta examensarbete har undersökt möjligheten att uppgradera till nyare system som bygger på en lösning med roterande borstlös frekvensomformare där reservdelarna och service är tillgängliga i minst 25 år. Undersökningen jämför olika roterande borstlösa frekvensomformare från olika leverantörer för att hitta en frekvensomformare där kraven från Trafikförvaltningen uppfylls. Studien har haft fokus på problemområdet med borstade frekvensomformaren som producerar skadliga ämnen såsom koldamm och värmen i relärum. Diskussioner med tillverkningsföretag av roterande borstlös frekvensomformaren har skett under denna studies gång där möjliga alternativ för vidare utveckling av systemet i relärum analyseras. I projektet har även diskuterat möjligheten att använda det nya systemet av frekvensomformare med borstlösa motor och generator istället för den nuvarande borstade frekvensomformaren som finns i anläggningen. Resultatet har även visat att den roterande borstlösa frekvensomformaren kan omvandla frekvensen till 75 Hz. Det nya systemet uppfyller kraven från Trafikförvaltningen samt att systemet håller i minst 25 år till. Att systemet håller minst i 25 år till var ett stort krav av Trafikförvaltningen som uppfylldes under denna studie. / Track lines are used in subway stations to show the train locations and determine the speed of the train by chopping the frequency. The frequency of the track lines is obtained from a rotary frequency converter. In today's stations, rotary frequency converters with brushes are commonly used. These emit a great deal of heat in some relays and produce environmental problems in the form of carbon dust from the brushes. The existing systems have been used for over 30 years and obtaining spare parts and conducting maintenance on the systems can be difficult. This degree project examines the possibility of newer systems being built on a rotating brushless frequency converter, where the spare parts and servicing would be available for at least the next 25 years. The project surveys and compares different rotating brushless frequency converters from different suppliers to find an identical frequency converter to meet the requirements of the Traffic Administration. The result of this study has had a lot of focus on the problem area with the brushed frequency converter that produces harmful substances such as carbon dust and the heat in the relay room. Discussions with manufacturing companies of rotating brushless frequency converters have been made during this study where possible options were discussed for further development of the system in relay rooms. The result has also discussed the possibilities of using the new system of frequency converters with brushless motor and generator instead of the current brushed frequency converter available in the facility. The result has also shown that the rotating brushless frequency converter can convert the frequency to 75 Hz. The new system meets RAMS requirements of the Trafikförvaltning, and the system lasts for at least 25 years. This was a major requirement of the Trafikförvaltning, which was fulfilled during this study.
|
3 |
Development of an experimental six-phase induction machine drive / Utveckling av en experimentell drivlina för en sexfasig asynkronmaskin.Bianchi, Adam January 2021 (has links)
Electrical machines with more than three phases are usually called multiphase electrical machines and they can have several advantages compared to conventional three-phase electrical machines such as a lower content of space-harmonics, lower torque ripple and better fault tolerance. This degree project involves rewinding of a three-phase induction machine into an asymmetrical six-phase machine. The winding design is based on simulations of a machine model in a finite element method software and the method "the star of the slot" that computes winding layouts. A six-phase drive is developed based on an existing printed circuit board prototype that is not operating according to its original specifications. Debugging of the prototype is performed and solutions to the problems are identified. Design and layout improvements for better electromagnetic compatibility are also implemented. The drive including the electrical machine is tested and confirmed to be working according to the specifications. Speed control based on indirect rotor field orientation is implemented and tested for the six-phase induction machine as well with the machine connected as a standard three-phase induction machine. / Elektriska maskiner med fler än tre faser kallas vanligtvis flerfasiga elektriska maskiner och kan ha flera fördelar jämfört med konventionella trefasiga elektriska maskiner, som lägre innehåll av övervågor, lägre rippel i vridmomentet och bättre feltolerans. Detta examensarbete involverar omlindning av en trefasig asynkronmaskin till en asymmetrisk sexfasig asynkronmaskin. Lindningsdesignen baseras på simuleringar av en maskinmodell i mjukvara baserat på finita element metoden och metoden kallad the star of the slotsom räknar ut lindnings ritningar. En sexfasig drivlina utvecklas baserat på en existerande kretskorts prototyp som inte fungerar enligt dess ursprunliga specifikationer. Felsökning av prototypen utförs och lösningar till problemen identifieras. Design- och layoutförbättringar för bättre elektromagnetisk kompatibilitet implementeras också. Drivlinan med den elektriska maskinen inkluderad testas och bekräftas fungera enligt dess specifikationer. Hastighetsreglering baserad på indirekt rotorfälts orientering implementeras och testas för den sexfasiga asynkronmaskinen samt även med maskinen kopplad som en standard trefas asynkronmaskin.
|
Page generated in 0.0323 seconds