Carrierless amplitude and phase (CAP) modulation is generally regarded as a bandwidth efficient two-dimensional (2-D) passband line code. It is closely related to the pulse amplitude modulation (PAM) and quadrature amplitude modulation (QAM) schemes. CAP has been proposed for various digital subscriber loop (DSL) systems over unshielded twisted pairs of copper wires. In this thesis, our main focus is on the minimum mean-square error (MMSE) performance of the ideal (i.e., infinite length) linear and non-linear (decision feedback) CAP receivers/equalisers in the presence of additive, coloured Gaussian noise, and/or data-like cross-talks. An in-depth analysis is given on the performance of both receiver structures. In the case of the linear receiver, one possible view of the overall CAP transceiver system which includes both data and cross-talk transmission paths is that it is a linear multiple-input multiple-output (MIMO) system. Accordingly, the existing MMSE results for a general MIMO system are applicable also to CAP systems. However, up to date, this approach was shown to be unsuccessful in the sense that the derived MMSE expressions are too complex and offer little insights. In our analysis, in order to find a more incisive MMSE expression, we reconsider the problem of minimisation of the MSEs at slicers. By exploiting the Hilbert transform pair relationship between the impulse responses of the inphase and quadrature transmit shaping filters, we are able to obtain an elegant and more meaningful MMSE expression, as well as the corresponding transfer functions of the optimum linear receive filters. In the case of the nonlinear, or decision feedback equaliser (DFE), receiver, we start our analysis with the receiver structure of a generic multidimensional (>/= 3) CAP-type system. / This receiver consists of a bank of analog receive filters, the number of which equals the dimension of the CAP line code, and a matrix of cross-connected, infinite-length, baud-spaced feedback filters. It is shown that the optimum filters and the corresponding MMSE of the DFE receiver require the factorisation of a discrete-time channel spectral matrix. This mathematically intractable step can be avoided, however, when the DFE results are specialised to a standard 2-D CAP system where we are able to again exploit the Hilbert transform pair relationship to derive a further and more useful MMSE expression. Three sets of numerical studies are given on the MMSE performance of the CAP receivers. In the first set of studies. we model the sum of all crosstalks as an additive, Gaussian noise source and select three test transmission channels over which we compare the MMSE performance of the linear and DFE receiver structures. In the second set of studies, we compare the performance of the two receiver structures, but in a data-like cross-talk environment. The results demonstrate the importance of NEXT equalisation in the design of CAP receivers operating in a NEXT dominant environment. In the final set of studies which follows from the second set of studies, we investigate the relationship between the MMSE performance of the DFE receiver and system parameters which include excess bandwidth, data rate, CAP scheme. and relative phase between the received signal and the NEXT signal. The results show that data-like cross-talks can be effectively suppressed by using a large excess bandwidth (alpha > 1 in the case of a RC transmit shaping filter) alone. / The relative phase also affect; the receiver performance. but to a lesser degree. In addition to the MMSE performance analysis. implementation issues of an adaptive linear CAP receiver are also considered. We propose a novel linear receiver by appending two fixed analog filters to the front-end of the existing adaptive linear receiver using fractionally-spaced equalisers (FSE). We show that if the analog filters are matched to the transmit shaping filters, then inphase and quadrature finite-length FSEs in the proposed receiver have the same NINISE solution. We further propose a modified least-mean-square (LMS) algorithm which takes advantage of this feature. The convergence analysis of the proposed LMS algorithm is also given. We show that the modified LMS algorithm converges approximately twice as fast as the standard LMS algorithm, given the same misadjustment, or alternatively, it halves the misadjustment, given the same initial convergence rate.

In this thesis, the applicability of Class-D amplifiers to integrated wide-band communication line driver applications is studied. While Class-D techniques can address some of the efficiency limitations of linear amplifier structures and have shown promising results in low frequency applications, the low frequency techniques and knowledge need further development in order to improve their practicality for wide band systems. New structures and techniques to extend the application of Class-D to wide-band communication systems, in particular the HomePlug AV wire- line communication standard, will be proposed. Additionally, the digital processing requirements of these wide-band systems drives rapid movement towards nanometer technology nodes and presents new challenges which will be addressed, and new opportunities which will be exploited, for wide-band integrated Class-D line drivers. There are three main contributions of this research. First, a model of Class-D efficiency degradation mechanisms is created, which allows the impact of high-level design choices such as supply voltage, process technology and operating frequency to be assessed. The outcome of this section is a strategy for pushing the high efficiency of Class-D to wide band communication applications, with switching frequencies up to many hundreds of Megahertz. A second part of this research considers the design of efficient, fast and high power Class-D output stages, as these are the major efficiency and bandwidth bottleneck in wide-band applications. A novel NMOS-only totem pole output stage with a fast, integrated drive structure will be proposed. In a third section, a complete wide-band Class-D line driver is designed in a 0.13μm digital CMOS process. The line driver is systematically designed using a rigorous development methodology and the aims are to maximise the achievable signal bandwidth while minimising power dissipation. Novel circuits and circuit structures are proposed as part of this section and the resulting fabricated Class-D line driver test chip shows an efficiency of 15% while driving a 30MHz wide signal with an MTPR of 22dB, at 33mW injected power.

International Telemetering Conference Proceedings / October 27-30, 1997 / Riviera Hotel and Convention Center, Las Vegas, Nevada / Sandia National Laboratories (SNL) currently achieves a bandwidth efficiency (h ) of 0.5 to 1.0 bps/Hz by using traditional modulation schemes, such as, BPSK and QFSK. SNL has an interest in increasing the present bandwidth efficiency by a factor of 4 or higher with the same allocated bandwidth (about 10 MHz). Simulations have shown that 32- QAM trellis-coded modulation (TCM) gives a good bit error rate (BER) performance, and meets the requirements as far as the bandwidth efficiency is concerned. Critical to achieving this is that the receiver be able to achieve timing synchronization. This paper examines a particular timing recovery algorithm for all-digital receivers. Timing synchronization in a digital receiver can be achieved in different ways. One way of achieving this is by interpolating the original sampled sequence to produce another sampled sequence synchronized to the symbol rate or a multiple of the symbol rate. An adaptive sampling conversion algorithm which performs this function was developed by Floyd Gardner in 1993. In the present work, his algorithm was applied to two different modulation schemes, BPSK and 4-ary PAM. The two schemes were simulated in the presence of AWGN and ISI along with Gardner’s algorithm for timing recovery, and a fractionally spaced equalizer (T/2 FSE) for equalization. Simulations show that the algorithm gives good BER performance for BPSK in all the situations, and at different sampling frequencies, but unfortunately poor performance for the 4-ary PAM scheme. This indicates that Gardner’s algorithm for sampling conversion is not suitable for multi-level signaling schemes.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / Bit error rate (BER) and bandwidth efficiency of several variations of enhanced Feher patented quadrature phase shift keying (FQPSK) [1] are described. An enhanced FQPSK increases the channel packing density of that of the IRIG 106-00 standardized FQPSK-B by approximately 50% in adjacent channel interference (ACI) environment. As the bandwidth efficiency of FQPSK-B DOUBLES (2×) that of pulse code modulation/Frequency modulation (PCM/FM) [5], the enhanced FQPSK, with a simpler transceiver than FQPSK-B, has a channel packing density of TRIPLE (3×) that of PCM/FM. One of the other enhanced FQPSK prototypes has an end to end system loss of only 0.4 dB at BER=1x10^(-3) and 0.5 dB at BER=1x10^(-4) from ideal linearly amplified QPSK theory. The enhanced FQPSK has a simple architecture, thus is inexpensive and has small size, for ultra high bit rate implementation. With low redundancy forward error correction (FEC) coding which expands the spectrum by approximately 10%, further improvement of about 3-4.5dB E N b o is attained with NLA FQPSK-B and enhanced FQPSK at BER=1x10^(-5) .

This thesis describes the use of a multi-amplitude minimum shift keying (MAMSK) signal in various types of wireless communication system. A MAMSK signal is a bandwidth efficient modulation scheme obtained by superimposing ℳ minimum shift keying (MSK) signals with unequal amplitudes. The overall phase of a MAMSK signal is controlled by the phase of the largest component MSK signal which allows the use of a low-complexity differential detector. A closed form expression for the average bit error rate (BER) for coherent detection of an MAMSK in AWGN is derived and is shown to achieve the same BER as that of square constellation quadrature amplitude modulation (QAM) with the same average transmit power. We describe the design and implementation of a STBC-based MIMO radio system in conjunction with MAMSK modulation. The proposed system provides high capacity data transmission by carrying information not only in the phases but also in the amplitude. Despite using a simple MAMSK differential receiver the system achieves performance within 1 dB of coherent detection. The existing MSK modems in conjunction with STBC could easily be modified to construct the proposed system. The MAMSK modulation scheme is extended to a multiuser relaying network where two nodes cooperate in a half-duplex environment to achieve diversity gain. The cooperative scheme is based on superposition modulation using a decode-and-forward (DF) strategy. In the proposed scheme, each node simultaneously transmits its own and the relayed signals by superimposing one on the other. A MAMSK signal is an excellent choice for this type of cooperative communication due its being obtained by a superposition technique. The proposed system exploits the overall phase of a MAMSK signal which allows differential detection and as a result it provides the lowest decoding complexity and memory requirements among the existing superposition based cooperation schemes. The performance of the system is evaluated by simulation, where it is shown that the MAMSK cooperative system outperforms a conventional DF scheme in terms of both power and bandwidth efficiency.

My thesis will demonstrate that Rate Adaptive Runlength Limited encoding (RA-RLL) achieves high data rates with acceptable error rate over a wide range of signal distortion/attenuation, and background noise. RA-RLL has performance superior to other infrared modulation schemes in terms of bandwidth efficiency, duty cycle control, and synchronization frequency. Rate adaptive techniques allow for quick convergence of RA-RLL parameters to acceptable values. RA-RLL may be feasibly implemented on systems with non-ideal timing and digital synchronization.

Spectrum, environment and location awareness are key characteristics of cognitive radio (CR). Knowledge of a user’s location as well as the surrounding environment type may enhance various CR tasks, such as spectrum sensing, dynamic channel allocation and interference management. This dissertation deals with the optimisation of adaptive localisation techniques for CR. The first part entails the development and evaluation of an efficient bandwidth determination (BD) model, which is a key component of the cognitive positioning system. This bandwidth efficiency is achieved using the Cramer-Rao lower bound derivations for a single-input-multiple-output (SIMO) antenna scheme. The performances of the single-input-single-output (SISO) and SIMO BD models are compared using three different generalised environmental models, viz. rural, urban and suburban areas. In the case of all three scenarios, the results reveal a marked improvement in the bandwidth efficiency for a SIMO antenna positioning scheme, especially for the 1×3 urban case, where a 62% root mean square error (RMSE) improvement over the SISO system is observed. The second part of the dissertation involves the presentation of a multiband time-of arrival (TOA) positioning technique for CR. The RMSE positional accuracy is evaluated using a fixed and dynamic bandwidth availability model. In the case of the fixed bandwidth availability model, the multiband TOA positioning model is initially evaluated using the two-step maximum-likelihood (TSML) location estimation algorithm for a scenario where line-of-sight represents the dominant signal path. Thereafter, a more realistic dynamic bandwidth availability model has been proposed, which is based on data obtained from an ultra-high frequency spectrum occupancy measurement campaign. The RMSE performance is then verified using the non-linear least squares, linear least squares and TSML location estimation techniques, using five different bandwidths. The proposed multiband positioning model performs well in poor signal-to-noise ratio conditions (-10 dB to 0 dB) when compared to a single band TOA system. These results indicate the advantage of opportunistic TOA location estimation in a CR environment. / Dissertation (MEng)--University of Pretoria, 2012. / Electrical, Electronic and Computer Engineering / unrestricted