The master’s thesis is focused on building WirelessHART node demo and on a description of WirelessHART standard, which is used in wireless sensor networks. Out of the comprehensive WirelessHART specifications firstly, the two lowest layers of OSI networking model are described: physical and data link layer. Secondly, burst mode and device variables are described to provide necessary information for data publishing in the network. The mote is assembled according to hardware and software requirements of WirelessHART demo system. The node is complemented by its firmware and PC application demonstrating its features in a user-friendly manner.

Lead-acid battery serves as the primary power source for vehicles. The total lifetime is determined by the parameters identified in the production, but also handling the operation and maintenance. This work deals with the effect of additives in the electrolyte added before and after the formation of cells lead-acid battery. The work deals with the influence of these additives during cyclic mode.

Wikis are a popular collaboration technology. They support the collaborative editing of web pages through a simple mark-up language. Mobile devices are becoming ubiquitous, powerful and affordable. Thus it is advantageous for people to get the benefits of wikis in a mobile setting. However, mobile computing leads to its own challenges such as limited screen size, bandwidth, memory and battery life; they also have intermittent connectivity due to the mobility and the coverage of network. I investigate how wikis can be made mobile; that is how wiki forms of collaborative editing can be achieved through mobile devices such as PDAs and smart phones. A prototype mobile wiki has been created using .NET, which addresses these issues and enables simple collaborative working whilst on and offline through smart mobile devices. A cut down wiki runs on the mobile device. This communicates with a main central wiki to cache pages for off line use. When sitting in a powered cradle eager, downloading and synchronization of pages is supported. During mobile operation, pages are cached lazily on demand to minimize power use and to save the limited and expensive bandwidth. On re-connection, offline edited as well as new pages are synchronized with the main wiki server. Finally a pluggable page rendering engine enables pages to be rendered in different ways to suit different sized screens.

Components used in mobile hand-held devices (smart phones and tablets) vary greatly in performance and power consumption. The microprocessors used in these devices also have vastly different capabilities and manufacturing limitations leading to significant variation effects. Battery life is a significant concern to the end users of these products. A stand-alone Android application capable of benchmarking a device's performance and power consumption is introduced. The application does not require the end user to have any analytic equipment or to have a technical background. This enables individual end users to better understand their particular device's performance and battery life interaction. They may also use the application to determine if their device's performance or battery life has degraded over time. Data is also uploaded to a central location so that devices can be compared against each other. The benchmarking application is capable of resolving variation effects caused by device, environmental changes and power management actions. This application demonstrates the feasibility of creating a low cost ecosystem where thousands of devices can be quantitatively compared. / text

Abstract Energy efficiency is a powerful measure for promoting sustainability in technological evolution and ensuring feasible battery life of end-user devices in mobile computing. Peer-to-peer technology provides decentralized and self-organizing architecture for distributing content between devices in networks that scale up almost infinitely. However, peer-to-peer networking may require lots of resources from peer nodes, which in turn may lead to increased energy consumption on mobile devices. For this reason, peer-to-peer networking has so far been considered unfeasible for mobile environment. This thesis makes several contributions towards enabling energy-aware peer-to-peer networking in mobile environments. First, an empirical study is conducted to understand the energy consumption characteristics of radio interfaces and typical composition of traffic in structured peer-to-peer networks. This is done in order to identify the most essential obstacles for utilizing peer-to-peer technology in mobile environments. Second, the e-Aware model for estimating the energy consumption of a mobile device is developed and empirically verified to achieve 3-21% error in comparison to real-life measurements. Third, the e-Mon model for the energy-aware load monitoring of peer nodes is developed and demonstrated to improve the battery life of mobile peer nodes up to 470%. Fourth, the ADHT concept of mobile agent based virtual peers is proposed for sharing the peer responsibilities between peer nodes in a subnet so that they can participate in a peer-to-peer overlay without compromising their battery life. The results give valuable insight into implementing energy-efficient peer-to-peer systems in mobile environments. The e-Aware energy consumption model accelerates the development of energy-efficient networking solutions by reducing the need for time-consuming iterations between system development and evaluations with real-life networks and devices. The e-Mon load monitoring model facilitates the participation of battery-powered devices in peer-to-peer and other distributed networks by enabling energy-aware load balancing where energy-critical mobile nodes carry less load than other nodes. The ADHT facilitates the participation of constrained-capacity wireless devices, such as machine-to-machine nodes, in a peer-to-peer network by allowing them to sleep for most of their time. / Tiivistelmä Energiatehokkuus on kustannustehokas tapa vähentää päätelaitteiden käytön aiheuttamia kasvihuonepäästöjä sekä parantaa niiden akunkestoa. Vertaisverkkoteknologia tarjoaa hajautetun, itseorganisoituvan, sekä lähes rajattomasti skaalautuvan verkkoarkkitehtuurin päätelaitteiden väliseen tallennustilan, mediasisältöjen ja tietoliikennekapasiteetin suorajakamiseen. Vertaisverkkojen suurin heikkous mobiilikäytön näkökulmasta on niiden päätelaitteille aiheuttama ylimääräinen kuormitus, mikä näkyy lisääntyneenä energiankulutuksena. Tässä väitöskirjassa on tutkittu mekanismeja vertaisverkon päätelaitteiden energiatehokkuuden parantamiseksi, tavoitteena riittävä akunkesto mobiilikäytössä. Aluksi työssä tutkittiin empiirisesti langattomien verkkojen mobiilipäätelaitteille aiheuttamaa energiankulutusta sekä rakenteellisten vertaisverkkojen vertaispäätelaitteille aiheuttamaa liikennekuormitusta. Tavoitteena oli muodostaa käsitys suurimmista haasteista mobiililaitteiden käytölle vertaisverkoissa. Seuraavaksi mobiiliverkkojen energiankulutusta koskevasta havaintoaineistosta muodostettiin energiankulutusmalli, e-Aware, jolla voitiin arvioida mobiilipäätelaitteen energiankulutusta erilaisilla verkon liikenneprofiileilla. Mallilla saavutettiin parhaimmillaan kolmen prosentin keskimääräinen virhe. Kolmannessa vaiheessa kehitettiin energiatietoinen kuormanseurantamalli, e-Mon, jota käyttäen saavutettiin jopa 470 % lisäys mobiilin vertaispäätelaitteen akunkestoon. Viimeisessä vaiheessa kehitettiin ADHT-konsepti, joka on uudentyyppinen tapa jakaa vertaispäätelaitteiden kuormaa usean saman verkkoklusterin päätelaitteen kesken käyttäen laitteesta toiseen kiertävää mobiiliagenttia. Väitöskirjan tulokset osoittavat että mobiililaitteiden energiatehokkuutta vertaisverkoissa pystytään olennaisesti parantamaan energiatietoisia kuormanjakomekanismeja käyttäen. Työssä kehitetty e-Aware nopeuttaa energiatehokkaiden hajautettujen järjestelmien kehitystyötä tarjoamalla tehokkaan työkalun järjestelmän energiankulutuksen arvioimiseen jo kehitysvaiheessa. e-Mon mahdollistaa energiatietoisen kuormanjaon vertaisverkoissa tarjoamalla tarvittavan kuormanseurantamallin. ADHT puolestaan tarjoaa uudenlaisen tavan vähentää vertaisverkkojen aiheuttamaa päätelaitekuormitusta hyödyntäen maksimaalisesti rajoitetun kapasiteetin laitteiden unitilojen käyttöön perustuvaa energiankulutusoptimointia.

The project considers realization system, which will allow us to test six different operation modes on lifetime accumulators. The system will link to computer, which will execute measurement current and tension and switch betwencharging and discharging modes. The measured values will record in someone time intervals in to computer memory. After someone time will analise these measured valuer and will provide optional operation mode.

This master’s thesis is focused on opportunities of optimization of electric power consumption from photovoltaic power plant. In theoretical part are presented basic principles and possibilities of photovoltaic system connection. It continues with an overview of backup systems and types of batteries. Practical part is about prediction of production and consumption of electric power, possibilities of power management and optimization. Next chapter deals with battery life cycle and their suitability for photovoltaic system. The last part of this thesis is the quantification of the stored electric energy economic value.

Technology Narrowband IoT is a representative LPWA (Low Power Wide Area) tech-nology that due to its promising features aims for demands of the Internet of Thingsapplications for autonomous data sending from sensors in areas of poor mobile coverage.For such applications, it is beneficial to firstly map properties of communication technol-ogy in areas of intended use and evaluate whether or not is this technology applicable.This Master thesis deals with the design of the hand-held measuring device for evaluationof Narrowband IoT properties. The output of this thesis is firstly comparison of LPWAtechnologies secondly, design of the mentioned device and verification of its functional-ity. And in last part description of measurement of transmission delay for delay-tolerantapplications. Transmission delay is a critical parameter for delay-tolerant applications.Such an application can be, for example, smart electrometers for which there is definedmaximal allowed transmission delay of 10 seconds and therefore it is desirable to evalu-ate whether or not is the deployment of the communication technology Narrowband IoTsuitable in the intended area for delay-tolerant or even for delay-intolerant applications.

Multi functional health monitoring wearable devices are quite prominent these days. Usually these devices are battery-operated and consequently are limited by their battery life (from few hours to a few weeks depending on the application). Of late, it was realized that these devices, which are currently being operated at fixed voltage and frequency, are capable of operating at multiple voltages and frequencies. By switching these voltages and frequencies to lower values based upon power requirements, these devices can achieve tremendous benefits in the form of energy savings. Dynamic Voltage and Frequency Scaling (DVFS) techniques have proven to be handy in this situation for an efficient trade-off between energy and timely behavior. Within imec, wearable devices make use of the indigenously developed MUSEIC v2 (Multi Sensor Integrated circuit version 2.0). This system is optimized for efficient and accurate collection, processing, and transfer of data from multiple (health) sensors. MUSEIC v2 has limited means in controlling the voltage and frequency dynamically. In this thesis we explore how traditional DVFS techniques can be applied to the MUSEIC v2. Experiments were conducted to find out the optimum power modes to efficiently operate and also to scale up-down the supply voltage and frequency. Considering the overhead caused when switching voltage and frequency, transition analysis was also done. Real-time and non real-time benchmarks were implemented based on these techniques and their performance results were obtained and analyzed. In this process, several state of the art scheduling algorithms and scaling techniques were reviewed in identifying a suitable technique. Using our proposed scaling technique implementation, we have achieved 86.95% power reduction in average, in contrast to the conventional way of the MUSEIC v2 chip’s processor operating at a fixed voltage and frequency. Techniques that include light sleep and deep sleep mode were also studied and implemented, which tested the system’s capability in accommodating Dynamic Power Management (DPM) techniques that can achieve greater benefits. A novel approach for implementing the deep sleep mechanism was also proposed and found that it can obtain up to 71.54% power savings, when compared to a traditional way of executing deep sleep mode. / Nuförtiden så har multifunktionella bärbara hälsoenheter fått en betydande roll. Dessa enheter drivs vanligtvis av batterier och är därför begränsade av batteritiden (från ett par timmar till ett par veckor beroende på tillämpningen). På senaste tiden har det framkommit att dessa enheter som används vid en fast spänning och frekvens kan användas vid flera spänningar och frekvenser. Genom att byta till lägre spänning och frekvens på grund av effektbehov så kan enheterna få enorma fördelar när det kommer till energibesparing. Dynamisk skalning av spänning och frekvens-tekniker (såkallad Dynamic Voltage and Frequency Scaling, DVFS) har visat sig vara användbara i detta sammanhang för en effektiv avvägning mellan energi och beteende. Hos Imec så använder sig bärbara enheter av den internt utvecklade MUSEIC v2 (Multi Sensor Integrated circuit version 2.0). Systemet är optimerat för effektiv och korrekt insamling, bearbetning och överföring av data från flera (hälso) sensorer. MUSEIC v2 har begränsad möjlighet att styra spänningen och frekvensen dynamiskt. I detta examensarbete undersöker vi hur traditionella DVFS-tekniker kan appliceras på MUSEIC v2. Experiment utfördes för att ta reda på de optimala effektlägena och för att effektivt kunna styra och även skala upp matningsspänningen och frekvensen. Eftersom att ”overhead” skapades vid växling av spänning och frekvens gjordes också en övergångsanalys. Realtidsoch icke-realtidskalkyler genomfördes baserat på dessa tekniker och resultaten sammanställdes och analyserades. I denna process granskades flera toppmoderna schemaläggningsalgoritmer och skalningstekniker för att hitta en lämplig teknik. Genom att använda vår föreslagna skalningsteknikimplementering har vi uppnått 86,95% effektreduktion i jämförelse med det konventionella sättet att MUSEIC v2-chipets processor arbetar med en fast spänning och frekvens. Tekniker som inkluderar lätt sömn och djupt sömnläge studerades och implementerades, vilket testade systemets förmåga att tillgodose DPM-tekniker (Dynamic Power Management) som kan uppnå ännu större fördelar. En ny metod för att genomföra den djupa sömnmekanismen föreslogs också och enligt erhållna resultat så kan den ge upp till 71,54% lägre energiförbrukning jämfört med det traditionella sättet att implementera djupt sömnläge.