This work deals with the regulation of the water temperature in a small garden pool. The practical part consists of practical design control unit garden pool which is based on knowledge of the ambient air temperature and the temperature of the solar panel, evaluates and controls the filtration pump bypass valve and solar panel. Temperature sensing is done using digital sensors DS18B20 more 1-Wire bus. The control unit is formed by 2x4 matrix keyboard keys. All data are displayed on the alphanumeric display 2x16 characters. Control element is a microcontroller Atmel ATmega 3250PA. Furthermore, discussed in this thesis is data transfer using Bluetooth module.

The aim of this master´s thesis is to design a log house on a particular parcel near the city of Jihlava in locality called Silver Courtyard. There will also be designed a shooting range for shotguns and rifles with facilities for shooters on this plot. There are also designed cottages for four and eight people, which will be placed between the log house and the shooting range on the edge of the pond. The log house will include a swimming pool, a whirpool bath, restaurant and two lecture halls. Wall structure is designed from wood sandwich system from OK Pyrus. The log house has a partial basement where are garages and technical support for the operation of the building. On the ground floor are all operations. Attic is only for guests. The log house is covered with a gable roof with insulation above the rafters for the use of aesthetic perception of the supporting truss. Covering is from the folded concrete. The overall concept is based on a proposal of the smallest possible heat loss.

This diploma thesis deals with a new building indoor swimming pool in town Lanškroun about one ground floor and one above-ground floors. This thesis is focused project documentation , technical reports, reports of fire safety and fulfillment Demands of building physics . The building is designed with three swimming pools, the first pool is a long 25m, children's pool and a relaxation pool. In addition to the pool hall are also designed two steam saunas . All the supporting structures are made of reinforced concrete. Outer walls of contact thermal insulation polystyrene foam . Roof is designed like 3 waves of water like compact roof. Heat insulation in the roof is designed from foam glass. The supporting structure of the roof in the pool hall is made of wood , glued truss. The pool hall is designed glass facade.

The subject of the project is new building of indoor swimming pool with gym with dimensions of 63,2x32,4 m and guest capacity of approximately 250 000 people per year. The project is located in Valašské Klobouky (parc.č. 2210/1, 2200/11, 2203, 2194, 2210 / 3, 2210/35 in the cadastral area of Valašské Klobouky) owned by the city Valašské Klobouky. In the neighborhood, there is took place building of primary schools, kindergartens, health centers and boarding house for seniors. Location of buildings on the property (built-up area of approximately 1934 square meters) is based on the requirement to continoue to the existing complex of objects with maximaly utilization of space and orientation to the quarters. The building is divided into two parts by volume. From an operational point of view is divided into three functionally different parts ie. A cafe, gym and indoor pool. The parts are divided by materials. Café, entry and operational facility is from supporting skeleton system, which is equipped with a facade of cladding panels in a uniform grid in combination with glass facade. The supporting part of the hall with pools and gym is consisted of laminated wooden trusses, which hold up the roof and cladding with sheeting of TiZN. Southwest facade of pool hall, toward to the health center, is fully glazed. Glazed stripes are also between individual segments of glulam wooden trusses of hall and ensures even natural lighting of the hall.

Subject matter: Training optimization of swimming of school-age children Objectives: The main goal of this research work is to suggest a model of advanced swimming training lessons with school-age children. Swimming training is practised in deep swimming pool. Next goal is to create an inventory of games and game disciplines which are suitable for training in deep water. Through the analysis of specialized literature and realization of experimental education we will be able to formulate new pieces of knowledge and introduce practical experience as a recommendation for practice. Method: The research work will observe swimming skills of school-age children within the advanced swimming training. The method of direct participant observation, measurement and scaling will be used. Results: Check on a model training we find out that advanced swimming trainning practised in deep water requires modifications of didactic methods of swimming skill training and swimming locomotion. Constant training of basic swimming skills, well- considered practises on a shore, motivational games and game disciplines are considered as the most important on the advanced swimming training. Key words: advanced swimming training, games, game disciplines, deep swimming pool/water, unsuitable swimming conditions

Title: Psychic load as a distinctive and inseperable component of lifeguarding service Aim of thesis: Aim of thesis is to explore perception of psychic workload by lifeguards in Czech republic and to extract basic psychological aspects of their job by statistical analysis based on retrieved data. This research also seeks for distinctions in perception of psychic workload between different groups of employees sorted by age, gender, qualification and other characteristics, such as diverse work environment or collective team size, and compares acquired results with other studies targeted on the same problematic in other work branches. Method: To retrieve data were used three questionnaires, which where spreaded electronically in cooperation with secretaryship of Water Rescue Service of Czech Red Cross and tens of pool operators throughout all the Czech republic. All the responses were descriptively and analytically processed using SPSS 17 programme and standardised statistical methods. Results: Results and conclusions will be used to characterise lifeguard occupation in a psychological way and to point out work-related and environment-related factors which have the most significant influence on lifeguards psychic. They will serve as a complementary material for pool operators to help them create more...

The master thesis is focused on problems surrounding defects and deficiencies of running a swimming pool site. It deals with particular defects which can occur at swimming pool's site. Different public swimming pools in Brno were visited to conduct an evaluation of real defects and deficiencies. After conducting the overview of defects, a correction solution was design for each defect. The defects are ranked according a scale measuring danger which I created

The aim of the Diploma thesis is elaboration of a design documentation for execution of a wellness hotel. The building is operationally divided into two parts – part accommodation and wellness part. The accommodation part includes four above-ground floors and one under-ground floor. In the under-ground floor are situated garages. In the first above-ground floor is designed restaurant and in other above-ground floors are situated hotel rooms. Wellness part is designed with two above-ground floors and one under-ground floor. In the under-ground floor are situated garages. In the first above-ground is designed wellness, which includes relaxation pool, whirpool, five indoor saunas, three outdoor saunas, kneipp and relaxation rooms. In the second above ground floor are designed solariums, massages, beauty salon and hairdressing salon. The part of the floor is also café with large terrace. A roof above 2.NP is designed as vegetative with extensive grassing. A roof above 4.NP is designed as a one-layer flat roof with classical sequence of layers. The building is designed as prefabricated skelet. Filling masonry is from a POROTHERM system. Floor structure is designed from prestpressed panel SPIROLL.

The thesis deals with the design and structural assessment of the swimming pool object in Dobruška. The solved structure has been chosen of the 2 preliminary variants. The dimensions of the rectangular floor plan are 34,10x40,99 m and the height of the ridge is 13,83 m. The structural system consist of two-hinged arched trusses which are connected with solid-web purlins and girts. The spatial rigidity is provided by combination of longitudinal and sway bracings. The cladding comprises of Kalzip roof system and a glass facade.

The subject of the master´s thesis is the architectural study of Spa world at Brno dam. The Spa is designed as part of the Aqua park, which was solved in atelier´s project. The building is located close to the Brno dam in hilly terrain. The proposed Spa world offers visitors the opportunity to relax, rehabilitation and entertainment in a variety of saunas. The Aqua Park is also a restaurant, massage, fitness center, shop, indoor and outdoor swimming pool.